检索结果-南通市图书馆

R & D OF HYDROGEN ABSORBING ALLOYS IN JAPAN

Acta metallurgica Sinica(English Letters) 1997年第3期10卷 249-255页

作者： K. Mii (sumitomo metal industries, Ltd., 1-t-3 Otemachi, Tokyo 100, Japan)M Amano (National Research Institute for metals, 1-2-1 Sengen, Tsukuba 305, Japan) sumitomo metal industries Ltd Otemachi Japan

The R & D of hydrogen absorbing alloys in Japan started in the early 1970s.Many alloys such as TiMm1.5 based alloys, Fe-Ti-O alloys (e.g. FeTi1.15 O0.024) andthe(mischmetal)Ni5 based alloys (e.g. MmNi4.5 Cr0.46 Mn0.04) were developed by the early 1980s. The application of these alloys to hydrogen storage, heat storage, heat pump, hydrogen purification and motor vehicles has been tried in many iaboratories,and the various techniques for using hydrogen absorbing alloys have been developed.The standarkization of evaluation methods for hydrogen absorbing alloys has been promoted by the Ministry of International Trade and Industry (MITI), and four of them were established as Japanese Industrial Standard (JIS).Alloys for Ni-metal Hydride batteries have been extensively investigated since 1987in Japun. Mm-Ni-Co-Al-Mn alloys (e.g. MmNi3.55 Co0.75Al0.9Mn0.4) have been devel-oped and commereialized since 1990. The amount of production of small-size Ni-MH batteries in 1995 was about three hundred milliion in number and about one hundred billion yen. The R & D for higher enerpy-density Ni-MH batteries is intensively in progress.MITI and STA (Science and Technology Agency) have promoted the R & D of hydro-gen absorbing alloys in Japan by carrying out the national projects such as Sunshine Program (MITI: 1974-1993) and Utilization of Wind Engeray (STA 1980-1985). The New Sunshine Program (MITI 1993-2020) have started in 1993. This program con-tains the application of hydrogen absorbing alloys to Economical- Enerpy- City System and to We-NET (International Clean Energy System of Technology Utilizing Hydro-gen: World Energy Network.

关键词： hydrogen absorbing alloy alloying element Ni-MH battery capacity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A Physical Core-Loss Model for Laminated Magnetic Sheet Steels

引用

Journal of Power and Energy Engineering 2024年第3期12卷 115-123页

作者： Kuofeng Chen metal Forming Technology Section Metal Industries Research & Development Centre Kaohsiung

A full-frequency instant core-loss equation built from the induction physical model of magnetic materials, where the iron loss, eddy loss, and hysteresis loss no longer have an integral term, and this new equation provides high simulation accuracy and performs dynamic core loss analysis on non-sinusoidal or pulse magnetic fields. The simulation examples use a high-grade electrical steel sheet 65CS400 by Epstein experimental data covering magnetic field 0.1 - 1.8 T and frequency 50 - 5000 Hz, and the average error of the simulated core loss is less than 4%. Since the simulation is converged by magnetic physical parameters, so the physical relevance of the similar laminated materials can be compared with the coefficient results. .

关键词： Core Loss Hysteresis Loss Electrical Steel Sheet

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effect of solute Ce,Mn,and Si on mechanical properties of silicon steel:insights from DFT calculations

引用

Journal of Iron and Steel Research(International) 2024年第3期31卷 700-709页

作者： Xiang-jun Liu Ji-chun Yang Hui-ping Ren Xiao-bin Jia Ming-yi Zhang Chang-qiao Yang School of Materials and metallurgy Inner Mongolia University of Science and TechnologyBaotou 014010Inner MongoliaChina Key Laboratory of Integrated Exploitation of Bayan Obo Multi-metal Resource Inner Mongolia University of Science and TechnologyBaotou 014010Inner MongoliaChina Inner Mongolia North Heavy industries Group Co. Ltd.Baotou 014010Inner MongoliaChina Inner Mongolia metal Material Research Institute Baotou 014010Inner MongoliaChina

The influence of solute Ce,Mn,and Si on the mechanical properties of silicon steel was investigated by first-principles calculation.Ce,Mn,and Si can all be solubilized in Fe matrix.Ce significantly reduces the incompressibility and rigidity of the system but also significantly improves the toughness and machinability.The effect of Mn on mechanical properties of the system is not obvious.Si has a significant effect on the improvement in incompressibility and rigidity but a limited effect on the improvement in toughness and machinability.The metallic bond strength of Fe-Ce,Fe-Mn,and Fe-Si doped systems is weaker than that of the pure Fe system,which can be used to explain the reduction in the incompressibility and rigidity of these doped systems.The relatively high electron cloud density in the doped system may be responsible for the increase in toughness.

关键词： Silicon steel Rare earth First-principles calculation Elastic modulus Electronic structure

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Error-based adaptive optimal tracking control of nonlinear discrete-time systems

引用

Science China(Information Sciences) 2024年第1期67卷 154-167页

作者： Chun LI Jinliang DING Frank L.LEWIS Tianyou CHAI State Key Laboratory of Synthetical Automation for Process industries Northeastern University UTA Research Institute The University of Texas at Arlington

In this paper,for the output tracking problem of nonlinear discrete-time systems,a performance index is newly defined using the adaptive dynamic programming(ADP) technique to completely eliminate tracking errors in theory.In contrast to traditional definitions of performance indices in other ADP-based methods,the proposed performance index is not only designed from the perspective of output tracking errors but also introduced errors of system states and control inputs at adjacent stages,which is suitable for practical situations in many industrial applications,such as the alumina production,the flotation process,and the mineral grinding process.We proved that the obtained controller can make the system output fully track the given reference trajectory by applying the iterative criteria of the ADP technique.In addition,the proposed algorithm was implemented using a data-driven technique and neural networks to avoid analyzing and deducing the complicated dynamics of actual industrial processes.Finally,using historical data for a forced-circulation evaporation system in the alumina production process,the effect of the proposed approach was verified through a numerical simulation and compared with that of the proportional-integral controller.

关键词： adaptive dynamic programming iterative criteria performance index tracking errors tracking problem

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Fully distributed dynamic event-triggered formation-containment tracking for multiagent systems with multiple types of disturbances

引用

Science China(Information Sciences) 2024年第1期67卷 168-186页

作者： Weihua LI Huaguang ZHANG Juan ZHANG Rui WANG College of Information Science and Engineering Northeastern University State Key Laboratory of Synthetical Automation for Process industries Northeastern University

This paper is dedicated to addressing the time-varying output formation-containment tracking(TVOFCT) problem for heterogeneous linear multiagent systems(MASs) with multiple types of disturbances under directed communication topology.The agents are divided into tracking leaders,formation leaders,and followers.In the output space,the formation leaders are required to form an expected geometric formation while tracking the tracking leader,and the followers are required to enter the convex hull spanned by formation leaders.First,a disturbance observer is designed to observe the disturbance with deterministic dynamics.Then,by combining adaptive technology with event-triggered technology,an independent fully distributed dynamic event-triggered(FDDET) compensator is designed to estimate the state of the tracking leader.The main advantages of this compensator lie in the following three aspects:(1) the adaptive weight does not increase unboundedly;(2) the interval time between events is expanded;(3) the design does not rely on any global information.Similar to the design of this compensator,an independent FDDET convex hull observer is further designed to observe the convex hull spanned by formation leaders.Subsequently,based on the designed disturbance observer,compensator,and convex hull observer,the adaptive disturbance rejection control input which can make the MASs achieve TVOFCT is formulated.Finally,a numerical simulation is provided to clearly verify the validity of the theoretical results.

关键词： formation-containment tracking disturbance rejection multiagent systems fully distributed control dynamic event-triggered control

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Cascaded four-wave mixing all-optical wavelength converter based on highly nonlinear fiber deposited graphene oxide

引用

Journal of Materials Science & Technology 2024年第4期171卷 10-15页

作者： Yuanhongliu Gao Xiaoyu Chen Tonglei Cheng Fang Wang Xin Yan College of Information Science and Engineering State Key Laboratory of Synthetical Automation for Process IndustriesNortheastern UniversityShenyang 110819China

The all-optical wavelength conversion using cascaded four-wave mixing(FWM)phenomena with graphene oxide(GO)and a highly nonlinear fiber(HNLF)device is demonstrated experimentally.GO has a strong third-order nonlinear effect and is an excellent nonlinear optical material for nonlinear optical wavelength conversion.The group velocity matching of pump and signal,HNLF,and GO amplification promote the cascaded nonlinear frequency mixing process.From the experimental and analytical results,the maximum spacing between signal and pump is 21 nm,and specifically,the order of cascaded FWM light increases from order 1 to order 2 with increasing GO,and the first-order FWM conversion effi-ciency increases to a maximum of−14.5 dB.To the best of our knowledge,this is the first time that cascaded FWM-based all-optical wavelength conversion in HNLF-GO with wide wavelength selectivity is investigated with combined pump and signal light.Our findings not only provide an effective method for achieving all-optical wavelength conversion in cascaded FWM but also offer the possibility of fabricating high-performance nonlinear optical devices.

关键词： Four-wave mixing Graphene oxide Highly nonlinear fiber Optical wavelength conversion

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

An intelligent control method based on artificial neural network for numerical flight simulation of the basic finner projectile with pitching maneuver

引用

Defence Technology（防务技术） 2024年第2期32卷 663-674页

作者： Yiming Liang Guangning Li Min Xu Junmin Zhao Feng Hao Hongbo Shi Northwestern Polytechnical University School of Astronautics Xi’an 710072China China North industries Group Corporation No 203 Research Institute Xi’an 710065China

In this paper,an intelligent control method applying on numerical virtual flight is proposed.The proposed algorithm is verified and evaluated by combining with the case of the basic finner projectile model and shows a good application prospect.Firstly,a numerical virtual flight simulation model based on overlapping dynamic mesh technology is constructed.In order to verify the accuracy of the dynamic grid technology and the calculation of unsteady flow,a numerical simulation of the basic finner projectile without control is carried out.The simulation results are in good agreement with the experiment data which shows that the algorithm used in this paper can also be used in the design and evaluation of the intelligent controller in the numerical virtual flight simulation.Secondly,combined with the real-time control requirements of aerodynamic,attitude and displacement parameters of the projectile during the flight process,the numerical simulations of the basic finner projectile’s pitch channel are carried out under the traditional PID(Proportional-Integral-Derivative)control strategy and the intelligent PID control strategy respectively.The intelligent PID controller based on BP(Back Propagation)neural network can realize online learning and self-optimization of control parameters according to the acquired real-time flight parameters.Compared with the traditional PID controller,the concerned control variable overshoot,rise time,transition time and steady state error and other performance indicators have been greatly improved,and the higher the learning efficiency or the inertia coefficient,the faster the system,the larger the overshoot,and the smaller the stability error.The intelligent control method applying on numerical virtual flight is capable of solving the complicated unsteady motion and flow with the intelligent PID control strategy and has a strong promotion to engineering application.

关键词： Numerical virtual flight Intelligent control BP neural network PID Moving chimera grid

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Mussel-inspired PTW@PDA composites for developing high-energy gun propellants with reduced erosion and enhanced mechanical strength

引用

Defence Technology（防务技术） 2024年第2期32卷 675-690页

作者： Xijin Wang Zhitao Liu Pengfei Sun Feiyun Chen Bin Xu Xin Liao School of Chemistry and Chemical Engineering Nanjing University of Science and TechnologyNanjing 210094JiangsuChina China North industries Group Corporation Limited Beijing 100045China

The severe erosion and inadequate mechanical strength are prominent challenges for high-energy gun propellants.To address it,novel PTW@PDA composites was prepared by polydopamine(PDA)-modifying onto potassium titanate whisker(PTW,K_(2)Ti_(6)O_(13)),and after was incorporated into gun propellant as erosion-reducing and mechanical-reinforcing fillers.The interfacial characterizations results indicated that as-prepared PTW@PDA composites exhibits an enhanced surface compatible with propellant matrix,thereby facilitating their dispersion into propellants more effectively than raw PTW materials.Compared to original propellants,PTW@PDA-modified propellants exhibited significant less erosion,with a Ti-Kbased protective coating being detected on the eroded steel.And 0.5 wt%and 1.0 wt%addition of PTW@PDA significantly improved impact,compressive and tensile strength of propellants.Despite the inevitably reduction in relative force,PTW@PDA slightly increase propellant burning rate while exerting little adverse impact on propellant dynamic activity.This strategy can provide a promising alternative to develop high-energy gun propellant with less erosion and more mechanical strength.

关键词： High energy gun propellant Potassium titanate whiskers Polydopamine modification Erosion inhibitors Mechanical reinforcing fillers

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Observer-based robust high-order fully actuated attitude autopilot design for spinning glide-guided projectiles

引用

Defence Technology（防务技术） 2024年第4期34卷 282-294页

作者： Wei Wang Yuchen Wang Shiwei Chen Yongcang Guo Zhongjiao Shi School of Aerospace Engineering Beijing Institute of TechnologyBeijing 10081China Northwest industries Group CO. Ltd.Xi'an 710043China

This paper investigates the design of an attitude autopilot for a dual-channel controlled spinning glideguided projectile(SGGP),addressing model uncertainties and external disturbances.Based on fixed-time stable theory,a disturbance observer with integral sliding mode and adaptive techniques is proposed to mitigate total disturbance effects,irrespective of initial conditions.By introducing an error integral signal,the dynamics of the SGGP are transformed into two separate second-order fully actuated systems.Subsequently,employing the high-order fully actuated approach and a parametric approach,the nonlinear dynamics of the SGGP are recast into a constant linear closed-loop system,ensuring that the projectile's attitude asymptotically tracks the given goal with the desired eigenstructure.Under the proposed composite control framework,the ultimately uniformly bounded stability of the closed-loop system is rigorously demonstrated via the Lyapunov method.Validation of the effectiveness of the proposed attitude autopilot design is provided through extensive numerical simulations.

关键词： Spinning glide-guided projectile Attitude control Sliding mode disturbance observer Fixed-time stable theory High-order fully actuated approach

来源：

维普期刊数据库

同方期刊数据库博看期刊评论

在线全文

学校读者我要写书评

暂无评论

Operational optimization of copper flotation process based on the weighted Gaussian process regression and index-oriented adaptive differential evolution algorithm

引用

Chinese Journal of Chemical Engineering 2024年第2期66卷 167-179页

作者： Zhiqiang Wang Dakuo He Haotian Nie College of Information Science and Engineering Northeastern UniversityShenyang 110004China State Key Laboratory of Synthetical Automation for Process industries Northeastern UniversityShenyang 110004China

Concentrate copper grade(CCG)is one of the important production indicators of copper flotation processes,and keeping the CCG at the set value is of great significance to the economic benefit of copper flotation industrial processes.This paper addresses the fluctuation problem of CCG through an operational optimization method.Firstly,a density-based affinity propagationalgorithm is proposed so that more ideal working condition categories can be obtained for the complex raw ore properties.Next,a Bayesian network(BN)is applied to explore the relationship between the operational variables and the CCG.Based on the analysis results of BN,a weighted Gaussian process regression model is constructed to predict the CCG that a higher prediction accuracy can be obtained.To ensure the predicted CCG is close to the set value with a smaller magnitude of the operation adjustments and a smaller uncertainty of the prediction results,an index-oriented adaptive differential evolution(IOADE)algorithm is proposed,and the convergence performance of IOADE is superior to the traditional differential evolution and adaptive differential evolution methods.Finally,the effectiveness and feasibility of the proposed methods are verified by the experiments on a copper flotation industrial process.

关键词： Weighted Gaussian process regression Index-oriented adaptive differential evolution Operational optimization Copper flotation process

来源：

维普期刊数据库博看期刊

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：