检索结果-南通市图书馆

International Journal of Mining Science and Technology 2024年第2期34卷 149-165页

作者： Xiaoping Zhou Linyuan Han Jing Bi Yundong Shou School of civil engineering Wuhan UniversityWuhan 430072China College of civil engineering Guizhou UniversityGuiyang 550025China

High-energy gas fracturing of shale is a novel,high efficacy and eco-friendly mining technique,which is a typical dynamic perturbing *** effectively extract shale gas,it is important to understand the dynamic mechanical properties of *** experiments on shale subjected to true triaxial compression at different strain rates are first conducted in this *** dynamic stress-strain curves,peak strain,peak stress and failure modes of shale are *** results of the study indicate that the intermediate principal stress and the minor principal stress have the significant influence on the dynamic mechanical behaviors,although this effect decreases as the strain rate *** characteristics of compression-shear failure primarily occur in shale subjected to triaxial compression at high strain rates,which distinguishes it from the fragmentation characteristics observed in shale under dynamic uniaxial ***,a numerical three-dimensional Split Hopkinson Pressure Bar(3D-SHPB),which is established by coupling PFC3D and FLAC3D methods,is validated to replicate the laboratory characteristics of *** dynamic mechanical characteristics of shale subjected to different confining stresses are systematically investigated by the coupling PFC3D and FLAC3D *** numerical results are in good agreement with the experimental data.

关键词： Dynamic behaviors True triaxial compression High strain rates Dynamic failure mechanism PFC3D-FLAC3D coupled method

Prediction of bearing capacity of pile foundation using deep learning approaches

在线全文

学校读者我要写书评

暂无评论

Frontiers of Structural and civil engineering 2024年第6期18卷 870-886页

作者： Manish KUMAR Divesh Ranjan KUMAR Jitendra KHATTI Pijush SAMUI Kamaldeep Singh GROVER Department of civil engineering SRM Institute of Science and Technology Tiruchirappalli CampusTrichy 621105India Department of civil engineering National Institute of Technology PatnaBihar 800005India Department of civil engineering Faculty of EngineeringThammasat School of EngineeringThammasat UniversityBangkok10200Thailand Department of civil engineering Rajasthan Technical UniversityKota 324010India

The accurate prediction of bearing capacity is crucial in ensuring the structural integrity and safety of pile *** research compares the Deep Neural Networks(DNN),Convolutional Neural Networks(CNN),Recurrent Neural Networks(RNN),Long Short-Term Memory(LSTM),and Bidirectional LSTM(BiLSTM)algorithms utilizing a data set of 257 dynamic pile load tests for the first ***,this research illustrates the multicollinearity effect on DNN,CNN,RNN,LSTM,and BiLSTM models’performance and accuracy for the first time.A comprehensive comparative analysis is conducted,employing various statistical performance parameters,rank analysis,and error matrix to evaluate the performance of these *** performance is further validated using external validation,and visual interpretation is provided using the regression error characteristics(REC)curve and Taylor *** from the comparative analysis reveal that the DNN(Coefficient of determination(R^(2))_(training(TR))=0.97,root mean squared error(RMSE)_(TR)=0.0413;R^(2)_(testing(TS))=0.9,RMSE_(TS)=0.08)followed by BiLSTM(R^(2)_(TR)=0.91,RMSE_(TR)=0.782;R^(2)_(TS)=0.89,RMSE_(TS)=0.0862)model demonstrates the highest performance *** is noted that the BiLSTM model is better than LSTM because the BiLSTM model,which increases the amount of information for the network,is a sequence processing model made up of two LSTMs,one of which takes the input in a forward manner,and the other in a backward *** prediction of pile-bearing capacity is strongly influenced by ram weight(having a considerable multicollinearity level),and the effect of the considerable multicollinearity level has been determined for the model based on the recurrent neural network *** this study,the recurrent neural network model has the least performance and accuracy in predicting the pile-bearing capacity.

关键词： deep learning algorithms high-strain dynamic pile test bearing capacity of the pile

Artificial Intelligence Prediction of One-Part Geopolymer Compressive Strength for Sustainable Concrete

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Computer Modeling in engineering & Sciences 2024年第10期141卷 525-543页

作者： Mohamed Abdel-Mongy Mudassir Iqbal M.Farag Ahmed.M.Yosri Fahad Alsharari Saif Eldeen A.S.Yousef Department of civil engineering College of EngineeringJouf UniversitySakaka72388Saudi Arabia Department of civil engineering University of Engineering and TechnologyPeshawar54890Pakistan civil engineering Department Faculty of EngineeringAl-Azhar UniversityCairo11884Egypt civil engineering Department Faculty of EngineeringAswan UniversityAswan81528Egypt

Alkali-activated materials/geopolymer(AAMs),due to their low carbon emission content,have been the focus of recent studies on ecological *** terms of performance,fly ash and slag are preferredmaterials for precursors for developing a one-part ***,determining the optimum content of the input parameters to obtain adequate performance is quite challenging and scarcely ***,in this study,machine learning methods such as artificial neural networks(ANN)and gene expression programming(GEP)models were developed usingMATLAB and GeneXprotools,respectively,for the prediction of compressive strength under variable input materials and content for fly ash and slag-based one-part *** database for this study contains 171 points extracted from literature with input parameters:fly ash concentration,slag content,calcium hydroxide content,sodium oxide dose,water binder ratio,and curing *** performance of the two models was evaluated under various statistical indices,namely correlation coefficient(R),mean absolute error(MAE),and rootmean square error(RMSE).In terms of the strength prediction efficacy of a one-part geopolymer,ANN outperformed *** and parametric analysis were also performed to identify the significant contributor to *** to a sensitivity analysis,the activator and slag contents had the most effects on the compressive strength at 28 *** water binder ratio was shown to be directly connected to activator percentage,slag percentage,and calcium hydroxide percentage and inversely related to compressive strength at 28 days and curing temperature.

关键词： Artificial intelligence techniques one-part geopolymer artificial neural network gene expression modelling sustainable construction polymers

Dynamic Response of A Group of Cylindrical Storage Tanks with Baffles Considering the Effect of Soil Foundation

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

China Ocean engineering 2024年第1期38卷 129-143页

作者： SUN Ying WANG Jia-dong HUO Rui-li ZHOU Ding GU Zhen-yuan QIAN Wang-ping School of Transportation and civil engineering Nantong UniversityNantong 226019China Faculty of civil engineering and Mechanics Jiangsu UniversityZhenjiang 212013China College of civil engineering Nanjing Tech UniversityNanjing 211816China

The sloshing in a group of rigid cylindrical tanks with baffles and on soil foundation under horizontal excitation is studied *** solutions for the velocity potential are derived out by the liquid subdomain *** models with mass-spring oscillators are established to replace continuous *** with the least square technique,Chebyshev polynomials are employed to fit horizontal,rocking and horizontal-rocking coupling impedances of soil,respectively.A lumped parameter model for impedance is presented to describe the effects of soil on tank structures.A mechanical model for the soil-foundation-tank-liquid-baffle system with small amount of calculation and high accuracy is proposed using the substructure *** analytical solutions are in comparison with data from reported literature and numerical codes to validate the effectiveness and correctness of the *** dynamic properties and seismic responses of the soil-tank system are given for the baffle number,size and location as well as soil parameter.

关键词： cylindrical tanks multiple annular baffles equivalent analytical model soil−structure interaction subdomain method dynamic response

Mechanical performance of cold mix asphalt containing cup lump rubber as a sustainable bio-modifier

在线全文

学校读者我要写书评

暂无评论

Journal of Traffic and Transportation engineering(English Edition) 2024年第3期11卷 424-440页

作者： Syed Abdul Ghafar Muhammad Naqiuddin Mohd Warid Norhidayah Abdul Hassan Zulfiqar Ali Jattak Ashraf Abdalla Mohammed Radwan Faculty of civil engineering Universiti Teknologi MalaysiaSkudai 81310Malaysia Department of civil engineering Balochistan University of Information TechnologyEngineering&Management SciencesQuettaPakistan Department of civil engineering Balochistan University of Engineering and TechnologyKhuzdarPakistan Department of civil engineering Faculty of EngineeringUniversity of TripoliTripoliLibya

The road construction industry aims to contribute to the protection of already compromised *** mix asphalt(CMA)is a measure initiated by the road industry to protect the environment and preserve *** having additional benefits,CMA has attracted little attention due to its inferior ***'s performance is enhanced using a sustainable binder bio-modifier,natural cup lump rubber(CLR)is one of *** study evaluated the tensile properties,rutting,moisture susceptibility,and adhesion properties of CLR-modified CMA(CMA-CR).The tensile property was enhanced by 26%due to CLR ***-CR had excellent rutting resistance of less than 2 mm rut depth at 10,000 load cycles,showing 70%improvement compared with conventional *** susceptibility evaluation indicated that CMA-CR had tensile strength ratio(TSR)value of 104%,satisfying the minimum 80%requirement of AASHTO *** also retained more than 96%bitumen *** moisture damage resistance was improved by 12%and 10%in terms of TSR and stripping,*** durability results revealed that the CMA-CR mixture prevented higher mass loss,representing 14%improvement compared with conventional CMA.

关键词： Cup lump rubber Cup lump modified cold mix asphalt Moisture damage Tensile property Rutting Digital imaging

Parametric investigation on the novel and cost-effective nano fly ash impregnated geopolymer system for sustainable construction

在线全文

学校读者我要写书评

暂无评论

Frontiers of Structural and civil engineering 2024年第2期18卷 170-183页

作者： R.MOHANA S.M.Leela BHARATHI Department of civil engineering Mepco Schlenk Engineering CollegeSivakasi 626123India

The hazardous environmental effects of greenhouse gas emissions and climate change demand alternative sources for cementitious materials in the construction *** development of geopolymer structures provides a way of producing 100%cement-free *** this research work,a novel and simple way of deriving nano particles from waste fly ash particles is *** effect of adding the synthesized nano fly ash particles as a filler medium in geopolymer mortars was investigated by considering strength and durability *** optimization was done by using regression analysis on the geopolymer mortar and the impact of adding nano fly ash particles was studied by varying different percentages of addition ranging from 0 to 7.5%by weight of binder *** the results,it was observed that 1%nano fly ash acted not only as a filler but also as nano-sized precursors of the polymerization process,resulting in denser geopolymer *** can explain the extraordinary gain in strength of 72.11 MPa as well as the denser core with negligible level of chloride ion penetration,making the material suitable for the development of structures susceptible to marine environment.

关键词： geopolymer nano fly ash chloride ion penetration durability polymerization fillers

A unified stochastic damage model for concrete based on multi-scale energy dissipation analysis

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2024年第3期67卷 863-877页

作者： GUO ChengGong LI Jie College of civil engineering Tongji UniversityShanghai 200092China State Key Laboratory of Disaster Reduction in civil engineering Shanghai 200092China

This work proposes a unified damage model for concrete within the framework of stochastic damage mechanics. Based on the micro-meso stochastic fracture model(MMSF), the nonlinear energy dissipation process of the microspring from nanoscale to microscale is investigated. In nanoscale, the rate process theory is adopted to describe the crack growth rate;therefore, the corresponding energy dissipation caused by a representative crack propagation can be obtained. The scale gap from nanoscale to microscale is bridged by a crack hierarchy model. Thus, the total energy dissipated by all cracks from the nanoscale to the microscale is gained. It is found that the fracture strain of the microspring can be derived from the above multi-scale energy dissipation analysis. When energy dissipation is regarded as some microdamage to the microspring, the constitutive law of the microspring is no longer linearly elastic, as previously assumed. By changing the expression of the damage evolution law from fracture strain to energy dissipation threshold, the new damage evolution model is derived. The proposed model can not only replicate the original static model but also extend to cases of rate dependence. By deriving the fracture strain under different strain rates, the rate sensitivity of concrete materials can be reflected. The model parameters can be conveniently obtained by identifying them with experimental data. Finally, several numerical examples are presented to verify the proposed model.

关键词： concrete damage model stochastic damage rate dependent energy dissipation

同方期刊数据库

Development of design charts to predict the dynamic response of pile supported machine foundations

在线全文

学校读者我要写书评

暂无评论

Frontiers of Structural and civil engineering 2024年第4期18卷 663-679页

作者： Deepthi SUDHI Sanjit BISWAS Bappaditya MANNA Department of civil engineering National Institute TechnologyWarangal 506004India Department of civil engineering Indian Institute of TechnologyDelhi 110016India

This paper proposes design charts for estimating imperative input parameters for continuum approach analysis of the nonlinear dynamic response of *** and analytical studies using continuum approach have been conducted on single and 2×2 grouped piles under coupled and vertical modes of vibration,for different dynamic forces and pile *** these design charts are derived from model piles,the charts have been validated for prototype pile foundations using scaling *** experimental responses of model piles are scaled up and these responses exhibit good agreement with analytical *** study also extends to estimation of the errors in computing frequency–amplitude responses with an increase in pile *** is found that,with an increase in pile length,the errors also *** effectiveness of the proposed design charts is also checked with data based on different field setups given in existing literature,and these charts are found to be ***,the developed design charts can be beneficial in estimating the input parameters for continuum approach analysis for determining the nonlinear responses of pile supported machine foundations.

关键词： pile foundation vertical vibration coupled vibration continuum approach soil-pile separation boundary zone parameters

Seismic-induced surficial failure of cohesive slopes using three-dimensional limit analysis:A case study of the Wangjiayan landslide in Beichuan, China

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Earthquake engineering and engineering Vibration 2024年第3期23卷 537-545页

作者： Gao Yufeng Liu Yang Geng Weijuan Zhang Fei Key Laboratory of the Ministry of Education for Geomechanics and Embankment engineering College of Civil and Transportation EngineeringHohai UniversityNanjing 210098China Department of civil engineering Faculty of Civil Engineering and MechanicsJiangsu UniversityZhenjiang 212013China

A seismic-induced landslide is a common geological catastrophe that occurs in *** Wangjiayan landslide,which was triggered by the Wenchuan earthquake,is a typical case in *** Wanjiayan landslide caused many casualties and resulted in enormous property *** study constructs a simple surficial failure model based on the upper bound approach of three-dimensional(3D)limit analysis to evaluate the slope stability of the Wangjiayan case,while a traditional two-dimensional(2D)analysis is also conducted as a reference for comparison with the results of the 3D analysis.A quasi-static calculation is used to study the effect of the earthquake in terms of horizontal ground acceleration,while a parametric study is conducted to evaluate the critical cohesion of *** than employing a 3D analysis,using the 2D analysis yields an underestimation regarding the safety *** the Wangjiayan landslide,the difference in the factors of safety between the 3D and 2D analyses can reach 20%.The sliding surface morphology as determined by the 3D method is similar to actual morphology,and the parameters of both are also compared to analyze the reliability of the proposed 3D method.

关键词： landslide Wenchuan earthquake surficial failure limit analysis stability quasi-static

2.5-dimension soil seismic response to oblique incident waves based on exact free-field solution

在线全文

学校读者我要写书评

暂无评论

Frontiers of Structural and civil engineering 2024年第2期18卷 216-235页

作者： Yeongbin Yang Zeyang Zhou Xiaoli Wang Xiongfei Zhang Zhilu Wang School of civil engineering Chongqing UniversityChongqing 400045China School of civil engineering and Architecture Chongqing University of Science and TechnologyChongqing 401331China

With the three dimensional(3D)oblique incident waves exactly determined for the free field,the soil seismic responses in both frequency and time domains are studied by the 2.5 dimension(2.5D)finite/infinite element ***,the free-field responses in frequency domain are solved exactly for 3D arbitrary incident P and SV waves,which requires no coordinate conversion or extra effort for SV waves with super-critical incident ***,the earthquake spectra are incorporated by the concept of equivalent seismic forces on the near-field boundary,based only on the displacements input derived for unit ground accelerations of each frequency using the 2.5D *** the asymmetric 2.5D finite/infinite element model adopted,the procedure for soil seismic analysis is *** solutions computed by the proposed method are verified against those of Wolf’s and de Barros and Luco’s and for inversely calculated ground *** interest is that abrupt variation in soil response occurs around the critical angle on the wave propagation plane for SV *** addition,the horizontal displacements attenuate with increasing horizontal incident angle,while the longitudinal ones increase inversely for 3D incident P and SV waves.

关键词： 3D oblique incident wave seismic response analysis 2.5D approach infinite element half-space