检索结果-南通市图书馆

Considering solid shear stress in MP-PIC simulation of a CFB riser

在线全文

学校读者我要写书评

暂无评论

Particuology 2024年第6期89卷 79-87页

作者： Tagir Kadyrov Fei Li Atta Ullah Nature-inspired Engineering Center University of TyumenTyumen 625003Russia laboratory of Theory and Optimization of Chemical and Technological Processes University of TyumenTyumen625003Russia state key laboratory of multi-phase complex systems Institute of Process EngineeringChinese Academy of SciencesBeijing 100190China Department of Chemical Engineering Pakistan Institute of Engineering&Applied SciencesIslamabad 45650Pakistan

To enable successful multi-phase particle-in-cell(MP-PIC)simulations of circulating fluidized beds(CFBs),both the interphase drag force and interparticle collisions need to be carefully *** collisions are usually represented by the solid stress consisting of the normal and shear components,in which the normal stress was found to have a leading role in the numerical stability of MP-PIC simulations,whereas the impact of the shear stress has seldom been *** this work,the effects of the solid shear stress are investigated by using two-dimensional simulations of the moderately dense laboratory-scale CFB riser with in-house MP-PIC code implemented on MFIX open-source *** including only normal solid stress and those considering both normal and shear solid stresses are *** results of solids flux,axial and radial solids profiles are compared with available experimental *** results show that the solid shear stress plays a minor role on the accuracy of simulation,and the increase of PPP(number particles per parcel)leads to a lower accuracy of simulation.

关键词： Simulation Fluidization multiphase particle-in-cell(MP-PIC) Solid shear stress

Crystallization management of CsPbI2Br perovskites by PbAc2-incorporated twice spin-coating process for efficient and stable CsPbI2Br perovskite solar cells

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第10期97卷 419-428页

作者： Yu Liu Kun Lang Huifang Han Huijing Liu Yao Fu Pengchen Zou Yinhui Lyu Jia Xu Jianxi Yao state key laboratory of Alternate Electrical Power system with Renewable Energy Sources Beijing Key Laboratory of Energy Safety and Clean Utilization North China Electric Power University

CsPbI2Br perovskite solar cell has been extensively studied due to its exceptional thermal stability and relatively stable perovskite phase ***,the presence of bromine leads to a rapid crystallization rate of CsPbI2Br films,resulting in small grain size and high defect ***,CsPbI2Br demonstrates poor light absorption due to its wide ***,it is crucial to control the crystallization rate and increase the film thickness to reduce defect density,enhance light absorption,and improve photovoltaic *** this study,we utilized a PbAc2-incorporated twice spincoating（PTS） process to address these ***,PbAc2was added to the CsPbI2Br precursor solution to form a CsPbI2Br film,which was then coated with the CsPbI2Br precursor solution to produce the PTS film,Ac-can delay the perovskite crystallization,leading to the formation of thicker and denser CsPbI2Br ***,lone-pair electrons of the oxygen atom provided by Ac-formed coordination bonds with under-coordinated Pb2+ions to fill halogen ion vacancies,thereby reducing the defect ***,the PTS CsPbI2Br device achieved a peak power conversion efficiency（PCE） of 16.19% and maintained 96.7% of its initial PCE over 1500 h at room temperature under 25% relative humidity without any encapsulation.

关键词： Crystallization management CsPbI2Br PbAc2 Perovskite solar cells Twice spin-coating process

Comparison-embedded evidence-CNN model for fuzzy assessment of wear severity using multi-dimensional surface images

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Friction 2024年第6期12卷 1098-1118页

作者： Tao SHAO Shuo WANG Qinghua WANG Tonghai WU Zhifu HUANG key laboratory of Education Ministry for Modern Design and Rotor-Bearing system Xi’an Jiaotong UniversityXi’an 710049China state key laboratory for Mechanical Behavior of Materials Xi’an Jiaotong UniversityXi’an 710049China

Wear topography is a significant indicator of tribological behavior for the inspection of machine health *** intelligent in-suit wear assessment method for random topography is here ***-dimension(3D)topography is employed to address the uncertainties in wear ***,3D topography reconstruction from a worn surface is accomplished with photometric stereo vision(PSV).Then,the wear features are identified by a contrastive learning-based extraction network(WSFE-Net)including the relative and temporal prior knowledge of wear ***,the typical wear degrees including mild,moderate,and severe are evaluated by a wear severity assessment network(WSA-Net)for the probability and its associated uncertainty based on subjective *** integrating the evidence information from 2D and 3D-damage surfaces with Dempster–Shafer(D–S)evidence,the uncertainty of severity assessment results is further *** proposed model could constrain the uncertainty below 0.066 in the wear degree evaluation of a continuous wear experiment,which reflects the high credibility of the evaluation result.

关键词： wear severity assessment contrastive learning subjective logic Dempster-Shafer(D-S)evidence theory

Enhanced carbon capture with motif-rich amino acid loaded defective robust metal-organic frameworks

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第3期17卷 2004-2010页

作者： Qi-Ye Ju Jia-Jia Zheng Li Xu Hai-Yan Jiang Zi-Qian Xue Lu Bai Yang-Yang Guo Ming-Shui Yao Ting-Yu Zhu state key laboratory of multi-phase complex systems CAS Key Laboratory of Green Process and EngineeringBeijing Key Laboratory of Ionic Liquids Clean ProcessInstitute of Process EngineeringChinese Academy of SciencesBeijing 100190China laboratory of Theoretical and Computational Nanoscience National Center for Nanoscience and TechnologyChinese Academy of SciencesBeijing 100190China School of Rare Earths University of Science and Technology of ChinaHefei 230026China Ganjiang Innovation Academy Chinese Academy of SciencesGanzhou 341000China University of Chinese Academy of Sciences Chinese Academy of SciencesBeijing 100049China Institute for Integrated Cell-Material Sciences Kyoto UniversityInstitute for Advanced StudyKyoto UniversityYoshidaUshinomiya-choSakyokuKyoto 606-8501Japan

The use of metal-organic frameworks(MOFs)as solid adsorption materials for carbon capture is promising,but achieving efficient and reversible adsorption with a balance of capacity and selectivity for carbon dioxide(CO_(2))over N_(2) remains a *** take full advantage of the strong channel traffic and robustness of MOFs with relatively small pores,it is highly necessary to employ a defect-engineering strategy to construct a broader channel structure that can facilitate the loading of functional motif-rich amino acids(AAs).This strategy can greatly enhance the CO_(2) adsorption performance of *** this study,motif-rich amino acids are loaded into the defective and robust porous frameworks via combined defect-engineering and post-synthetic *** defective Zr/Hf-MOF-808s modified with AAs,especially for the 18 mol%4-nitroisophthalic acid,generated defective products allowing for the loading of L-serine(L-Ser).This modification resulted in a significant improvement in both the adsorption capacity(248%improvement at 298 K,100 kPa)and the selectivity of CO_(2)/N_(2) using the ideal adsorbed solution theory(IAST),with the selectivity increasing to 120.55 and 38.27 at 15 and 100 kPa,respectively,while maintaining good cycling *** functional theory(DFT)simulation,CO_(2) temperature-programmed desorption(CO_(2)-TPD),and in situ Fourier transform infrared spectroscopy(FTIR)were further employed to have a better understanding of the enhanced CO_(2) adsorption ***,unlike the AAs loaded pristine MOF-808s that showed the best CO_(2) adsorption capacity with the loading of short and small glycine(Gly),the broadened channel size in our work enables the loading of functional motif-rich L-serine,which brings more active binding sites,improving CO_(2) adsorption.

关键词： carbon capture and storage metal-organic framework(MOF) amino acids(AAs) defect-engineering motif-rich

Integrated optical frequency transfer and optical physical layer key distribution with enhanced link reciprocity detection

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China(Information Sciences) 2024年第7期67卷 335-336页

作者： Kunfeng XIE Liang HU Jianping CHEN Guiling WU state key laboratory of Advanced Optical Communication system and Networks Department of Electronic EngineeringShanghai Jiao Tong University

Optical fiber transmission has been widely used in communications and metrology, wherein optical frequency transfer (OFT) and optical physical layer secure key distribution (OKD) have become research hotspots [1, 2]. Moreover,OFT can perform a comparison between state-of-the-art optical atomic clocks and implement coherent optical phase transfer over long distances to support geodesy [1, 3].

关键词：

Oxidation behavior of 4774DD1 Ni-based single-crystal superalloy at 980℃ in air

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

China Foundry 2024年第2期21卷 116-124页

作者： Yu Fang Ya-zhou Li Qiang Yang Qun-gong He Xiu-fang Gong Qian Duan Hai-yang Song Fu Wang Qiong-yuan Zhang Hong Zeng state key laboratory of Long-Life High Temperature Materials Dongfang Turbine Co.Ltd.Deyang 618000SichuanChina state key laboratory for Manufacturing system Engineering School of Mechanical EngineeringXi’an Jiaotong UniversityXi’an 710049China

The oxidation behavior of a novel Ni-based single-crystal 4774DD1 superalloy for industrial gas turbine applications was investigated by the isothermal oxidation at 980℃ and discontinuous oxidation weight gain *** phase constitution and morphology of surface oxides and the characteristics of the crosssection oxide film were analyzed by XRD,SEM and *** show that the oxidation kinetics of the 4774DD1 superalloy follows the cubic law,indicating its weak oxidation resistance at this *** the oxidation time increases,the composition of the oxide film evolves as following:One layer consisting of a bottom Al_(2)O_(3)sublayer and an upper(Al_(2)O_(3)+NiO)mixture sublayer after oxidized for 25 ***,two layers composed of an outermost small NiO discontinuous grain layer and an internal layer for 75 *** internal layer is consisted of the bottom Al_(2)O_(3)sublayer,an intermediate narrow CrTaO_(4)sublayer,and an upper(Al_(2)O_(3)+NiO)mixture *** two layers comprising an outermost relative continuous NiO layer with large grain size and an internal layer as the oxidation time increases to 125 *** internal layer is composed of the upper(Al_(2)O_(3)+NiO)mixture sublayer,an intermediate continuous(CrTaO_(4)+NiWO_(4))mixture sublayer,and a bottom Al_(2)O_(3)***,three layers consisting of an outermost(NiAl2O_(4)+NiCr2O_(4))mixture layer,an intermediate(CrTaO_(4)+NiWO_(4))mixture layer,and a bottom Al_(2)O_(3)layer for 200 h.

关键词： nickel-base single crystal superalloy oxidation kinetics oxide film microstructure mechanism

Cable-driven legged landing gear for unmanned helicopter:Prototype design,optimization and performance assessment

在线全文

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2024年第4期67卷 1196-1214页

作者： TIAN BaoLin GAO HaiBo YU HaiTao SHAN HaoMin HOU JunChen YU HongYing DENG ZongQuan state key laboratory of Robotics and system Harbin Institute of TechnologyHarbin 150001China China Academy of Aerospace Science and Innovation Beijing 100048China

Unmanned helicopters equipped with adaptive landing gear will dramatically extend their application especially in dealing with challenging *** study presents a novel cable-driven legged landing gear(CLG)with differential transmission for unmanned helicopters in complex landing *** obtain the preferred configuration of the legged mechanism,a multi-objective optimization framework for the CLG is constructed by concurrently considering terrain adaptability,landing stability and reasonable linkage of internal *** non-dominated sorting genetic algorithmⅡis employed to numerically acquire the optimal scale parameters that guide the mechanical design of the *** unmanned helicopter prototype equipped with the devised CLG is developed with key performance *** results show that the devised CLG can provide energy-efficient support over uneven terrains(totally driven torque demand less than 0.1 N m)in quasi-static landing tests,and favorable terrain adaptability(posture fluctuation of the fuselage less than±1°)in unknown slope landing *** exhibited merits give the proposed CLG the potential to enhance the landing performance of future aircraft in extreme environments.

关键词： unmanned helicopter adaptive landing gear experimental verification

Thermal Property Enhancement of a Novel Shape-Stabilized Sodium Acetate Trihydrate-Acetamide/Expanded Graphite-Based Composite phase Change Material

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第4期33卷 1564-1576页

作者： AN Zhoujian HOU Wenjie DU Xiaoze HUANG Zhongzheng MOMBEKI PEA Hamir Johan ZHANG Dong LIU Xiaomin College of Energy and Power Engineering Lanzhou University of TechnologyLanzhou730050China key laboratory of multi-supply system with Solar Energy and Biomass of Gansu Province Lanzhou730050China Gansu Natural Energy Research Institute Lanzhou730046China

phase change materials(PCMs)are a kind of highly efficient thermal storage materials which have a bright application prospect in many fields such as energy conservation in buildings,waste heat recovery,battery thermal management and so *** inorganic hydrated salt PCMs have received increasing attention from researchers due to their advantages of being inexpensive and ***,inorganic hydrated salt PCMs are still limited by the aspects of inappropriate phase change temperature,liquid phase leakage,large supercooling and severe phase separation in the application *** this work,sodium acetate trihydrate was selected as the basic inorganic PCM,and a novel shape-stabilized composite phase change material(CPCM)with good thermal properties was prepared by adding various functional *** first,the sodium acetate trihydrate-acetamide binary mixture was prepared and the melting point was adjusted using *** the binary mixture was incorporated into expanded graphite to synthesize a novel shape-stabilized *** thermophysical properties of the resultant shape-stabilized CPCM were systematically *** microscopic morphology and chemical structure of the obtained shape-stabilized CPCM were characterized and *** experiment results pointed out that acetamide could effectively lower the melting point of sodium acetate *** obtained shape-stabilized CPCM modified with additional 18%(mass fraction)acetamide and 12%(mass fraction)expanded graphite exhibited good shape stability and thermophysical characteristics:a low supercooling degree of 1.75℃and an appropriate melting temperature of 40.77℃were obtained;the latent heat of 151.64 kJ/kg and thermal conductivity of 1.411 W/(m·K)were also ***,after 50accelerated melting-freezing cycles,the obtained shape-stabilized CPCM represented good thermal reliability.

关键词： sodium acetate trihydrate melting point modification agent expanded graphite shape stability thermal conductivity enhancement

A novel multi-channel CNN-LSTM and transformer-based network for diesel engine misfire diagnosis under different noise conditions

在线全文

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2024年第9期67卷 2965-2967页

作者： LI Ou LEI JunBo QIN ChengJin ZHANG ZhiNan TAO JianFeng LIU ChengLiang state key laboratory of Mechanical system and Vibration School of Mechanical EngineeringShanghai Jiao Tong UniversityShanghai 200240China

Misfire fault, as a major fault of diesel engines, usually occurs because of low fuel quality, insufficient compression, ignition system failure, *** engines may experience issues such as reduced power, increased fuel consumption, and increased noise when misfire happens. Therefore, timely detection and diagnosis of diesel engine misfire faults are of great significance in the industry [1].

关键词： Diesel diagnosis network