检索结果-南通市图书馆

Micro-strain regulation strategy to stabilize perovskite lattice based on the categories and impact of strain on perovskite solar cells

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 578-604页

作者： Caixia Li Wenwu Liu Shiji Da Lingbin Kong Fen Ran state key laboratory of Advanced Processing and Recycling of Nonferrous Metals Lanzhou University of Technology School of materials science and Engineering Lanzhou University of Technology

Photovoltaic metal halide perovskite solar cells(PSCs) convert light to electricity more efficiently than crystalline silicon cells, and the cost of materials used to make them is lower than that of silicon *** efficiency is not a core issue affecting the application of perovskite solar cells in special *** present, stability is the major technical encounters that hinders its further commercial development. Microstrain in PSCs is currently a significant factor responsible for the device's instability. Strain-induced ion migration is widely believed to accelerate perovskite degradation even when external stimuli are ***, it is imperative to study strain to enhance the stability of PSCs. This paper reviews recent developments to understand strain's origin and effect mechanisms on performance of PSCs, including ion migration,failure behavior, defect formation, and its effect on photoelectric properties, stability, and ***, several well-known strain management strategies are systematically introduced based on the strain effect mechanism and strain engineering on the film, providing more clues for further preparation with increased stability. The manipulation of external physical strain applied from films to entire devices has been extensively studied. Furthermore, recommendations for future research directions and chemical approaches have been provided. It is emphasized that strain engineering plays a crucial role in improving the efficiency and longevity of PSCs. Tensile strain causes rapid degradation, while moderate compressive strain and external strain control could improve properties and stability. Efforts should focus on controlling compressive strain to mitigate residual tensile strain and introducing it in a controlled manner. Future research endeavors may focus on exploring these pathways to improve the efficiency and lifespan of PSCs.

关键词： Halide perovskite solar cells Strain origins Strain effects Strain management

Unraveling the significance of cobalt on transformation kinetics,crystallography and impact toughness in high-strength steels

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and materials 2025年第2期32卷 380-390页

作者： Yishuang Yu Jingxiao Zhao Xuelin Wang Hui Guo Zhenjia Xie Chengjia Shang Collaborative Innovation Center of Steel technology University of Science and Technology BeijingBeijing 100083China School of materials science and Engineering Shanghai Jiao Tong UniversityShanghai 200240China state key laboratory for Advanced Metals and materials University of Science and Technology BeijingBeijing 100083China

This work reveals the significant effects of cobalt(Co)on the microstructure and impact toughness of as-quenched highstrength steels by experimental characterizations and thermo-kinetic *** results show that the Co-bearing steel exhibits finer blocks and a lower ductile-brittle transition temperature than the steel without ***,the Co-bearing steel reveals higher transformation rates at the intermediate stage with bainite volume fraction ranging from around 0.1 to *** improved impact toughness of the Co-bearing steel results from the higher dense block boundaries dominated by the V1/V2 variant ***,the addition of Co induces a larger transformation driving force and a lower bainite start temperature(BS),thereby contributing to the refinement of blocks and the increase of the V1/V2 variant *** findings would be instructive for the composition,microstructure design,and property optimization of high-strength steels.

关键词： high-strength steel cobalt transformation kinetics crystallography impact toughness

Dielectric-ion-conductive ZnNb2O6 layer enabling rapid desolvation and diffusion for dendrite-free Zn metal batteries

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 693-701页

作者： Haifeng Yang Jian Wang Panpan Zhang Xiaomin Cheng Qinghua Guan Jing Dong Bixian Chen Lujie Jia Jing Zhang Yongzheng Zhang Yunjian Liu Hongzhen Lin School of materials science and Engineering Jiangsu University i-Lab & CAS key laboratory of Nanophotonic materials and Devices Suzhou Institute of Nano-Tech and Nano-Bionics Chinese Academy of Sciences Helmholtz Institute Ulm (HIU) Karlsruhe Institute of technology (KIT) School of materials science and Engineering Xi'an University of Technology state key laboratory of Chemical Engineering East China University of Science and Technology

Rechargeable aqueous zinc-metal batteries （AZMBs） are promising candidates for large-scale energy storage systems due to their low cost and high ***,their performance and sustainability are significantly hindered by the sluggish desolvation kinetics at the electrode/electrolyte interface and the corresponding hydrogen evolution reaction where active water molecules tightly participate in the Zn（H2O）62+solvation ***,learnt from self-generated solid electrolyte interphase （SEI） in anodes,the dielectric but ion-conductive zinc niobate nanoparticles artificial layer is constructed on metallic Zn surface （ZNB@Zn）,acting as a rapid desolvation *** zincophilic and dielectric-conductive properties of ZNB layer accelerate interfacial desolvation/diffusion and suppress surface corrosion or dendrite formation,achieving uniform Zn plating/stripping behavior,as confirmed by electronic/optical microscopies and interface spectroscopical measurements together with theoretical ***,the as-prepared ZNB@Zn electrode exhibits excellent cycling stability of over 2000 h and robust reversibility （99.54%） even under high current density and depth of discharge ***,the assembled ZNB@Zn-based full cell displays high capacity-retention rate of 80.21%after 3000 cycles at 5 A g-1and outstanding rate performance up to 10 A *** large-areal pouch cell is stabilized for hundreds of cycles,highlighting the bright prospects of the dielectric but ion-conductive layer in further application of AZMBs.

关键词： Zn metal battery Dielectric artificial layer Rapid ion diffusion Zincophilic diffusion Active water inhibition

Effects of carbon content on the microstructure and tensile properties of a low-density steel

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and materials 2025年第2期32卷 391-401页

作者： Yongxuan Shang Mingyu Fan Shuyong Jiang Zhongwu Zhang key laboratory of Superlight materials and Surface technology Ministry of EducationCollege of Materials Science and Chemical EngineeringHarbin Engineering UniversityHarbin 150001China state key laboratory of Metal Material for Marine Equipment and Application Iron&Steel Research Institute of Ansteel Group CorporationAnshan 114009China

Carbon can change the phase components of low-density steels and influence the mechanical *** this study,a new method to control the carbon content and avoid the formation ofδ-ferrite by decarburization treatment was *** microstructural changes and mechanical characteristics with carbon content induced by decarburization were systematically ***-Jaoul(C-J)analysis was employed to examine the work hardening characteristics during the tensile *** decarburization by heat treatments,the carbon content within the austenite phase decreased,while Mn and Al were almost unchanged;this made the steel with full austenite transform into the austenite and ferrite dual ***,(Ti,V)C carbides existed in both matrix phase and the mole fraction almost the *** addition,the formation of other carbides *** loss induced a decrease in strength due to the weakening of the carbon solid *** the steel with the single austinite,the deformation mode of austenite was the dislocation planar glide,resulting in the formation of *** the dual-phase steel,the deformation occurred by the dislocation planar glide of austenite first,with the increase in strain,the cross slip of ferrite took place,forming dislocation cells in *** the late stage of deformation,the work hardening of austinite increased rapidly,while that of ferrite increased slightly.

关键词： low-density steels carbon content decarburization strengthening mechanisms work hardening behavior

Mechanistic insight into the synergy between nickel single atoms and nanoparticles on N-doped carbon for electroreduction of CO2

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 327-336页

作者： Mingdong Sun Wenwen Guan Cailing Chen Chao Wu Xiaoling Liu Biao Meng Tao Chen Yu Han Jun Wang Shibo Xi Yu Zhou state key laboratory of materials-Oriented Chemical Engineering College of Chemical Engineering Nanjing Tech University Advanced Membranes and Porous materials Center Physical Sciences and Engineering Division King Abdullah University of Science and Technology Institute of Sustainability for Chemicals Energy and Environment A*STAR (Agency for Science Technology and Research) College of materials science and Engineering Sichuan University

The synergy of single atoms （SAs） and nanoparticles （NPs） has demonstrated great potential in promoting the electrocatalytic carbon dioxide reduction reaction （CO2RR）;however,the rationalization of the SAs/NPs proportion remains one challenge for the catalyst ***,a Ni2+-loaded porous poly（ionic liquids）(PIL) precursor synthesized through the free radical self-polymerization of the ionic liquid monomer,1-allyl-3-vinylimidazolium chloride,was pyrolyzed to prepare the Ni,N co-doped carbon materials,in which the proportion of Ni SAs and NPs could be facilely modulated by controlling the annealing *** catalyst Ni-NC-1000 with a moderate proportion of Ni SAs and NPs exhibited high efficiency in the electrocatalytic conversion of CO2into *** Ni K-edge X-ray absorption near-edge structure （XANES） spectra and theoretical calculations were conducted to gain insight into the synergy of Ni SAs and *** charge transfer from Ni NPs to the surrounding carbon layer and then to the Ni SAs resulted in the electron-enriched Ni SAs active *** the electroreduction of CO2,the coexistence of Ni SAs and NPs strengthened the CO2activation and the affinity towards the key intermediate of*COOH,lowering the free energy for the potential-determining*CO2→*COOH step,and therefore promoted the catalysis efficiency.

关键词： Single atom catalyst Synergy effect Carbon catalyst Electrocatalysis

Role of iron ore in enhancing gasification of iron coke:Structural evolution,influence mechanism and kinetic analysis

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and materials 2025年第1期32卷 58-69页

作者： Jie Wang Wei Wang Xuheng Chen Junfang Bao Qiuyue Hao Heng Zheng Runsheng Xu School of Chemistry and materials science Hubei Engineering UniversityXiaogan 432000China key laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education Wuhan University of Science and TechnologyWuhan 430081China Institue of Ironmaking technology Baosteel Central Research InstituteShanghai 201999China state key laboratory of Advanced Metallurgy University of Science and Technology BeijingBeijing 100083China

The utilization of iron coke provides a green pathway for low-carbon *** uncover the influence mechanism of iron ore on the behavior and kinetics of iron coke gasification,the effect of iron ore on the microstructure of iron coke was ***,a comparative study of the gasification reactions between iron coke and coke was conducted through non-isothermal thermogravimetric *** findings indicate that compared to coke,iron coke exhibits an augmentation in micropores and specific surface area,and the micropores further extend and *** provides more adsorption sites for CO_(2) molecules during the gasification process,resulting in a reduction in the initial gasification temperature of iron *** the heating rate in non-isothermal gasification can enhance the reactivity of iron *** metallic iron reduced from iron ore is embedded in the carbon matrix,reducing the orderliness of the carbon structure,which is primarily responsible for the heightened reactivity of the carbon *** kinetic study indicates that the random pore model can effectively represent the gasification process of iron coke due to its rich pore ***,as the proportion of iron ore increases,the activation energy for the carbon gasification gradually decreases,from 246.2 kJ/mol for coke to 192.5 kJ/mol for iron coke 15wt%.

关键词： low-carbon ironmaking iron coke gasification structural evolution kinetic model

From blocker to booster:Harnessing garnet surface chemistry for advanced solid-state electrolytes

在线全文

学校读者我要写书评

暂无评论

Nano Research 2025年第1期18卷 323-331页

作者： Jun Cheng Xuan Zhou Hongqiang Zhang Zhen Zeng Yuanyuan Li Yulong Zhu Yingsheng Liao Lijie Ci Deping Li state key laboratory of Precision Welding and Joining of materials and Structures School of Materials Science and EngineeringHarbin Institute of Technology(Shenzhen)Shenzhen 518055China

Garnet electrolytes with high ionic conductivity and electrochemical stability are widely used as fillers to fabricate composite solid electrolytes(CPEs)within polymer ***,the performance of CPEs is significantly influenced by the surface characteristics of the garnet ***,the impact of garnet surface characteristics on CPEs was systematically investigated and a conversion from a typically unstable and Lewis basic surface to a more stable Lewis acidic surface was realized,which is shown to be more conductive to the improved performance of *** simultaneously removing the Li_(2)CO_(3)layer and applying a Li-Al-O coating,the influence of surface characteristics on CPEs was *** Lewis acid Li-Al-O surface coating not only promotes lithium salt dissociation,improving the ionic conductivity and ionic transfer number,but also prevents the reformation of the passive Lewis basic Li_(2)CO_(3)*** to garnet with a Lewis basic Li_(2)CO_(3)surface,the garnet modified with a Lewis acid Li-Al-O coating enhances CPEs,which exhibit an improved critical current density of 1.0 mA·cm^(-2)and highly stable lithium symmetric cell cycling for 400 h at 0.2 mA·cm^(-2).This research highlights the importance of surface chemistry in the design of high-performance solid-state batteries and presents a strategic modification approach for garnetbased CPEs.

关键词： garnet electrolyte composite solid electrolyte surface chemistry all-solid-state batteries

Effects of aggregate size distribution and carbon nanotubes on the mechanical properties of cemented gangue backfill samples under true triaxial compression

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and materials 2025年第2期32卷 311-324页

作者： Qian Yin Fan Wen Zhigang Tao Hai Pu Tianci Deng Yaoyao Meng Qingbin Meng Hongwen Jing Bo Meng Jiangyu Wu state key laboratory of Intelligent Construction and Healthy Operation and Maintenance of Deep Underground Engineering China University of Mining and TechnologyXuzhou 221116China state key laboratory of Mining Response and Disaster Prevention and Control in Deep Coal Mines Anhui University of Science and TechnologyHuainan 232001China state key laboratory for Geomechanics&Deep Underground Engineering China University of Mining and Technology(Beijing)Beijing 100083China key laboratory of Xinjiang Coal Resources Green Mining Ministry of EducationXinjiang Institute of EngineeringUrumqi 830023China

The mechanical behavior of cemented gangue backfill materials(CGBMs)is closely related to particle size distribution(PSD)of aggregates and properties of cementitious ***,the true triaxial compression tests,CT scanning,SEM,and EDS tests were conducted on cemented gangue backfill samples(CGBSs)with various carbon nanotube concentrations(P_(CNT))that satisfied fractal theory for the PSD of *** mechanical properties,energy dissipations,and failure mechanisms of the CGBSs under true triaxial compression were systematically *** results indicate that appropriate carbon nanotubes(CNTs)effectively enhance the mechanical properties and energy dissipations of CGBSs through micropore filling and microcrack bridging,and the optimal effect appears at P_(CNT)of 0.08wt%.Taking PSD fractal dimension(D)of 2.500 as an example,compared to that of CGBS without CNT,the peak strength(σ_(p)),axial peak strain(ε_(1,p)),elastic strain energy(Ue),and dissipated energy(U_(d))increased by 12.76%,29.60%,19.05%,and90.39%,***,excessive CNTs can reduce the mechanical properties of CGBSs due to CNT agglomeration,manifesting a decrease inρ_(p),ε_(1,p),and the volumetric strain increment(Δε_(v))when P_(CNT)increases from 0.08wt%to 0.12wt%.Moreover,the addition of CNTs improved the integrity of CGBS after macroscopic failure,and crack extension in CGBSs appeared in two modes:detour and pass through the ***σ_(p)and U_(d)firstly increase and then decrease with increasing D,and porosity shows the opposite ***ε_(1,p)andΔε_(v)are negatively correlated with D,and CGBS with D=2.150 has the maximum deformation parameters(ε_(1,p)=0.05079,Δε_(v)=0.01990)due to the frictional slip effect caused by coarse *** increasing D,the failure modes of CGBSs are sequentially manifested as oblique shear failure,"Y-shaped"shear failure,and conjugate shear failure.

关键词： cemented gangue backfill materials particle size distribution true triaxial compression test carbon nanotubes mechanical properties failure modes

Universal design of three-dimensional porous graphene-iron based promotors for kinetically rationalized lithium-sulfur chemistry

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 192-200页

作者： Hua Gao Yunfeng Zhang Menglei Wang Ruoxuan Yang Shuai Feng Xuan Cao Yaping Zhang Zhongyuan Lu Yingze Song state key laboratory of Environment-Friendly Energy materials School of Materials and Chemistry Southwest University of Science and Technology School of Material science and Engineering Henan University of Technology College of Chemistry and Chemical Engineering Taishan University

Lithium-sulfur （Li-S） batteries are widely deemed to be one of the most potential candidates for future secondary batteries because of their remarkable energy ***,notorious polysulfide shuttling and retarded sulfur reaction kinetics pose significant obstacles to the further application of Li-S *** rationally designed highly active electrocatalysts can facilitate polysulfide conversion,the universal and scalable synthesis strategies need to be ***,a universal synthetic strategy to construct a series of three-dimensional （3D） porous graphene-iron （3DGr-Fe） based electrocatalysts involving 3DGr-FeP,3DGr-Fe3C,and 3DGr-Fe3Se4is exploited for manipulating the Li-S redox *** has been observed that the implementation of a 3D porous Gr architecture leads to the well-designed conductive networks,while the uniformly dispersed iron nanoparticles introduce an abundance of active sites,fostering the lithium polysulfide conversion,thereby bolstering the overall electrochemical *** Li-S battery with the 3DGr-Fe based electrocatalyst exhibits remarkable capacity retention of 94.8%upon 100 times at 0.2 ***,the soft-packaged Li-S pouch cell based on such a 3DGr-Fe electrocatalyst delivers superior capacity of 1060.71 mA h g-1and guarantees for the continuous 30 min work of fan *** investigation gives comprehensive insights into the design,synthesis,and mechanism of 3DGr-Fe based electrocatalysts with high activity toward efficient and durable Li-S batteries.

关键词： Lithium-sulfur battery Universal synthesis 3D graphene-iron based promotor Electrocatalysis