检索结果-南通市图书馆

Fullerenes and derivatives as electrocatalysts: Promises and challenges

Green Energy & Environment 2024年第1期9卷 7-27页

作者： Kun Guo Ning Li Lipiao Bao Xing Lu state key laboratory of materials processing and die&mould technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan430074China

Carbon-based metal-free nanomaterials are promising alternatives to precious metals as electrocatalysts of key energy storage and conversion technologies.Of paramount signiﬁcance are the establishment of design principles by understanding the catalytic mechanisms and identifying the active sites.Distinct from sp2-conjugated graphene and carbon nanotube,fullerene possesses unique characteristics that are growingly being discovered and exploited by the electrocatalysis community.For instance,the well-deﬁned atomic and molecular structures,the good electron afﬁnity to tune the electronic structures of other substances,the intermolecular self-assembly into superlattices,and the on-demand chemical modiﬁcation have endowed fullerene with incomparable advantages as electrocatalysts that are otherwise not applicable to other carbon ma-terials.As increasing studies are being reported on this intriguing topic,it is necessary to provide a state-of-the-art overview of the recent progress.This review takes such an initiative by summarizing the promises and challenges in the electrocatalytic applications of fullerene and its derivatives.The content is structured according to the composition and structure of fullerene,including intact fullerene(e.g.,fullerene composite and superlattices)and fullerene derivatives(e.g.,doped,endohedral,and disintegrated fullerene).The synthesis,characterization,catalytic mechanisms,and deﬁciencies of these fullerene-based materials are explicitly elaborated.We conclude it by sharing our perspectives on the key aspects that future efforts shall consider.

关键词： Fullerene Fullerene derivative Metal-free catalyst Structural defect Electrocatalyst

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Toughening additive manufactured Zr-based bulk metallic glass composites by martensite phase transformation

引用

Journal of materials Science & technology 2024年第3期170卷 95-102页

作者： Pengcheng Zhang Cheng Zhang Jie Pan Di Ouyang Lin Liu state key laboratory of materials processing and die&mould technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan 430074China

Additive manufacturing technology based on laser powder bed fusion(LPBF)offers a novel approach for fabricating bulk metallic glass(BMG)products without restriction in size and geometry.Nevertheless,the BMGs prepared by LPBF usually suffered from less plasticity and poorer fracture toughness as compared to their cast counterparts due to partial crystallization in heat-affected zones(HAZs).Since crystallization in HAZs is hard to avoid completely in LPBF BMGs,it is desirable to design a suitable alloy system,in which only ductile crystalline phase,instead of brittle intermetallics,is formed in HAZs.This unique structure could effectively increase the toughness/plasticity of the LPBF BMGs.To achieve this goal,a quaternary BMG system with a composition of Zr_(47.5)Cu_(45.5)Al_(5)Co_(2)is adopted and subjected to LPBF.It is found that nearly a single phase of B_(2)-ZrCu is precipitated in HAZs,while a fully amorphous phase is formed in molten pools(MPs).This B_(2)phase reinforced BMG composite exhibits excellent mechanical properties with enhanced plasticity and toughness.Furthermore,it is easy to modulate the mechanical properties by altering the amount of the B_(2)phase via adjusting the laser energy input.Finally,the best combination of strength,plasticity,and notch toughness is obtained in the BMG composite containing 27.4%B_(2)phase and 72.6%amorphous phase,which exhibits yield strength(σ_(s))of 1423 MPa,plastic strain(ε_(p))of 4.65%,and notch toughness(K_(q))of 53.9 MPa m 1/2.Furthermore,a notable strain-hardening is also observed.The improvement of plasticity/toughness and appearance of strain-hardening behavior are mainly due to the martensite phase transformation from the B_(2)phase to the Cm phase during plastic deformation(i.e.,the phase transformation-induced plasticity effect).The current work provides a guide for making advanced BMGs and BMG composites by additive manufacturing.

关键词： Laser powder bed fusion Bulk metallic glass composites Phase transformation-induced plasticity Deformation mechanism

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Progress in preparation of AlN-reinforced magnesium matrix composites:A review

引用

China Foundry 2024年第1期21卷 1-10页

作者： Lu Chen Shu-lin Lü Di-jia Zhao Wei Guo Jian-yu Li Shu-sen Wu state key Lab of materials processing and die&mould technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan 430074China

As a ceramic material,AlN has very good thermophysical and mechanical properties.In addition,AlN is an effective refining agent for Mg alloys because it has a lattice constant similar to that of Mg.Therefore,AlN is an ideal reinforcement for magnesium matrix composites(MMCs),and is attracting increasing attention.This review addresses the development of preparation technologies for AlN-reinforced Mg matrix composites.The mainstream preparation techniques include stir casting,melt infiltration,powder metallurgy,and in-situ methods.In addition,the advantages and disadvantages of these techniques are analyzed in depth,and it is pointed out that the next direction for the preparation of high-performance AlN-reinforced MMCs is less aluminization and multiple technologies integration.

关键词： AlN MMCs preparation thermophysical property mechanical property

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Unraveling the incompatibility mechanism of ethylene carbonate-based electrolytes in sodium metal anodes

引用

Journal of Energy Chemistry 2024年第7期94卷 560-567页

作者： Daomin Qin Fangyuan Cheng Meiian Cao Feiyang Yan Qian Wang Chun Fang Jiantao Han state key laboratory of Material processing and die&mould technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan430074HubeiChina

Ethylene carbonate(EC)is widely used in lithium-ion batteries due to its optimal overall performance with satisfactory conductivity,relatively stable solid electrolyte interphase(SEl),and wide electrochem-ical window.EC is also the most widely used electrolyte solvent in sodium ion batteries.However,com-pared to lithium metal,sodium metal(Na)shows higher activity and reacts violently with Ec-based electrolyte(NaPF_(6)as solute),which leads to the failure of sodium metal batteries(SMBs).Herein,we reveal the electrochemical instability mechanism of EC on sodium metal battery,and find that the com-bination of EC and NaPF_(6)is electrically reduced in sodium metal anode during charging,resulting in the reduction of the first coulombic efficiency,and the continuous consumption of electrolyte leads to the cell failure.To address the above issues,an additive modified linear carbonate-based electrolyte is provided as a substitute for EC based electrolytes.Specifically,ethyl methyl carbonate(EMC)and dimethyl carbon-ate(DMC)as solvents and fluoroethylene carbonate(FEC)as SEI-forming additive have been identified as the optimal solvent for NaFP_(6)based electrolyte and used in Na_(4)Fe_(3)(PO_(4))_(2)(P_(2)O_(7))/Na batteries.The batter-ies exhibit excellent capacity retention rate of about 80%over 1000 cycles at a cut-off voltage of 4.3 V.

关键词： Na metal batteries Ethylene carbonate decomposition Na_(4)Fe_(3)(PO_(4))_(2)(P_(2)O_(7))cathode Interface engineering Ethylene carbonate-free electrolyte

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Microstructure evolution, mechanical properties and fracture behavior of Al-xSi/AZ91D bimetallic composites prepared by a compound casting

引用

Journal of Magnesium and Alloys 2024年第5期12卷 1944-1964页

作者： Guangyu Li Wenming Jiang Feng Guan Junwen Zhu Yang Yu Zitian Fan state key laboratory of materials processing and die & mould technology School of Materials Science and Engineering Huazhong University of Science and Technology

In this paper, the effect of the Si content on microstructure evolution, mechanical properties, and fracture behavior of the Al-xSi/AZ91D bimetallic composites prepared by compound casting was investigated systematically. The obtained results showed that all the Al-xSi/AZ91D bimetallic composites had a metallurgical reaction layer（MRL）, whose thickness increased with increasing Si content for the hypoeutectic Al-Si/AZ91D composites, while the hypereutectic Al-Si/AZ91D composites were opposite. The MRL included eutectic layer（E layer）,intermetallic compound layer（IMC layer） and transition region layer（T layer）. In the IMC layer, the hypereutectic Al-Si/AZ91D composites contained some Si solid solution and flocculent Mg2Si+Al-Mg IMCs phases not presented in the hypoeutectic Al-Si/AZ91D composites.Besides, increasing Si content, the thickness proportion of the T layer increased, forming an inconsistent preferred orientation of the MRL.The shear strengths of the Al-xSi/AZ91D bimetallic composites enhanced with increasing Si content, and the Al-15Si/AZ91D composite obtained a maximum shear strength of 58.6 MPa, which was 73.4% higher than the Al-6Si/AZ91D composite. The fractures of the Al-xSi/AZ91D bimetallic composites transformed from the T layer into the E layer with the increase of the Si content. The improvement of the shear strength of the Al-xSi/AZ91D bimetallic composites was attributed to the synergistic action of the Mg2Si particle reinforcement, the reduction of oxidizing inclusions and the ratio of Al-Mg IMCs as well as the orientation change of the MRL.

关键词： Al/Mg bimetallic composites Si content Mg 2 Si reinforcement Microstructure Mechanical properties Fracture behavior

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

High-Superelasticity NiTi Shape Memory Alloy by Directed Energy Deposition-Arc and Solution Heat Treatment

引用

Acta Metallurgica Sinica(English Letters) 2024年第1期37卷 132-144页

作者： Junyi Ma Lin Yu Qing Yang Jie Liu Lei Yang state key laboratory of materials processing and die&mould technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan430070China School of Transportation and Logistics Engineering Wuhan University of TechnologyWuhan430074China

Directed energy deposition-arc(DED-Arc)technology has the advantages of simple equipment,low manufacturing cost and high deposition rate,while the use of DED-Arc has problems of microstructure inhomogeneity,position dependence of macroscopic mechanical properties and anisotropy.Therefore,it is necessary to carry out a subsequent heat treatment to improve its microstructure uniformity,mechanical properties and superelasticity.In this investigation,the DED-Arc 15-layer NiTi alloy thin-walled parts with the solution treatment at different process parameters were studied to analyze the effects of solution heat treatment on microstructure,phase composition,phase transformation,microhardness,tensile and superelasticity.The temperature range of solution treatment is 800-1050℃,and the treatment time range is 1-5.5 h.The results show that after solution treatment at 800℃/1 h,the content of precipitated phase decreases,the grain is refined,the microhardness increases,and the mechanical properties in the 0°direction are improved.The strain recovery rate after 10 tensile cycles has increased from 37.13%(as-built)to 49.25%(solid solution treatment).This research provides an effective post treatment method for high-performance DED-Arc NiTi shape memory alloys.

关键词： Directed energy deposition-arc(DED-Arc) Cold metal transfer(CMT) NiTi shape memory alloys Microstructure Phase transformation Solution heat treatment

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Fast thermal responsive separators toward long-life and safe lithium metal batteries

引用

Nano Research 2024年第4期17卷 2746-2754页

作者： Pingan Li Zhifang Liu Yitong Peng Shanshan Yang Tao Meng Yunhuan Hu Yingjun Jiang Hao Sun Qi Li Xianluo Hu state key laboratory of materials processing and die and mould technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan 430074China

Lithium metal batteries(LMBs)have been extensively investigated during the past decades because of their ultrahigh energy densities.With the increasing demand for energy density,however,the safety issue of LMBs has become a significant challenge.In particular,localized areas of increased temperature(namely,hotspots)may be induced and even exacerbated within LMBs by uneven current distribution,internal short circuits,or inadequate heat dissipation,which significantly sacrifices battery safety and cycle life.Here,we report the rational design and fabrication of a fast thermal responsive separator capable of inhibiting the growth of lithium dendrites and mitigating thermal propagation,thereby reducing the risk of thermal runaway.The as-achieved separator comprises both an electrospun membrane using a phase change material with superior thermal-storage ability and a thermally conductive modification layer of hexagonal boron nitride nanosheets with a fast heat-transfer feature.It is demonstrated that such a unique integration of heat conduction and heat storage enables the functional separator with attractive abilities to mitigate hotspots and inhibit the growth of lithium dendrites upon the cycling of LMBs.Moreover,pouch cells with the thermal-responsive separator,as well as numerical simulations,verify much enhanced safety and cycle life of LMBs.This work may offer a new conceptual design of intelligent separators that acts as a functional unit encapsulated within a single cell to boost in-situ thermal management,which will help to develop high-safety and energy-dense LMBs.

关键词： lithium metal batteries separators hotspots safety thermal management

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Arc additive manufacturing of gradient hot forging die with shaped waterways

引用

China Welding 2024年第1期33卷 27-39页

作者：余圣甫林海涛邱源 state key laboratory of materials processing and die&mould technology Huazhong University of Science and TechnologyWuhan 430074China

Under the working environment of high temperature and strong load impact,hot forging die is prone to failure which reduces the service life of die.Using arc additive manufacturing in the die cavity,a gradient material hot forging die with high precision,superior per-formance,and conformal cooling channels is developed.This improves the toughness of the die cavity and reduces the working temperature,thereby forming an isothermal field,which is an effective method to enhance the lifespan of the hot forging die.Three kinds of gradient flux-cored wires are designed for the surface of 5CrNiMo steel,and the microstructure and mechanical properties between gradient interfaces were studied.Based on the spatial curved structure of shaped waterways in the hot forging die cavity,a study was conducted on the strategy of partitioned forming for the manufacturing of the die with shaped waterways.In order to avoid interference with the arc gun,the hot for-ging die is divided into four regions,namely the transition region,upper,middle,and lower region,based on a combination of cavity depth and internal U-shaped and quadrilateral structures.The results show that the developed flux-cored wires have good moldability with straight sides of deposited metal under different process parameters and flat surface without cracks,pores and other defects.Under the same working conditions,the life of hot forging die formed by the gradient materials is more than multiple times that of the single material hot forging die,and the temperature gradient field of the shaped waterway die is 7℃/cm smaller than that of traditional straight waterway.

关键词： gradient materials shaped waterways arc additive manufacturing mechanical property

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Accelerated water harvesting from vapor via a bio-inspired hydrogel pattern

引用

National Science Review 2024年第3期11卷 48-49页

作者： Lianbin Zhang Peng Wang state key laboratory of Material processing and die&mould technology Key Laboratory of Materials Chemistry for Energy Conversion and Storage of Ministry of Education School of Chemistry and Chemical Engineering Huazhong University of Science and Technology(HUST) School of Environmental Science and Engineering Sun Yat-sen University

Water and energy sustainability are integral parts of resource sustainability of the world. Due to water molecules' superior capability of serving as both hydrogenbond donor and acceptor, phase change of water, especially between liquid and vapor, underpins global water cycles,facilitates energy transformation and transfer, and thus helps shape the unique local weather and global climate patterns.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Recent advances in two-dimensional photovoltaic devices

引用

Journal of Semiconductors 2024年第5期45卷 26-40页

作者： Haoyun Wang Xingyu Song Zexin Li Dongyan Li Xiang Xu Yunxin Chen Pengbin Liu Xing Zhou Tianyou Zhai state key laboratory of materials processing and die&mould technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan 430074China Research Institute of Huazhong University of Science and technology in Shenzhen Shenzhen 518057China Optics Valley laboratory Wuhan 430074China

Two-dimensional(2D)materials have attracted tremendous interest in view of the outstanding optoelectronic properties,showing new possibilities for future photovoltaic devices toward high performance,high specific power and flexibility.In recent years,substantial works have focused on 2D photovoltaic devices,and great progress has been achieved.Here,we present the review of recent advances in 2D photovoltaic devices,focusing on 2D-material-based Schottky junctions,homojunctions,2D−2D heterojunctions,2D−3D heterojunctions,and bulk photovoltaic effect devices.Furthermore,advanced strategies for improving the photovoltaic performances are demonstrated in detail.Finally,conclusions and outlooks are delivered,providing a guideline for the further development of 2D photovoltaic devices.

关键词： two-dimensional materials photovoltaic devices photodetectors solar cells heterostructures

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：