检索结果-南通市图书馆

Simplified quantitative analysis method and its application in the insitu synthesized copper-based azide chips

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Defence technology（防务技术） 2024年第2期32卷 309-316页

作者： Jie Ren Yunfeng Li Mingyu Li Xingyu Wu Jiabao Wang Qingxuan Zeng state key laboratory of Explosion and technology Beijing Institute of TechnologyBeijing 100081China

Copper-based azide(Cu(N_(3))2 or CuN_(3),CA)chips synthesized by in-situ azide reaction and utilized in miniaturized explosive systems has become a hot research topic in recent years.However,the advantages of in-situ synthesis method,including small size and low dosage,bring about difficulties in quantitative analysis and differences in ignition capabilities of CA chips.The aim of present work is to develop a simplified quantitative analysis method for accurate and safe analysis of components in CA chips to evaluate and investigate the corresponding ignition ability.In this work,Cu(N_(3))2 and CuN_(3)components in CA chips were separated through dissolution and distillation by utilizing the difference in solubility and corresponding content was obtained by measuring N_(3)-concentration through spectrophotometry.The spectrophotometry method was optimized by studying influencing factors and the recovery rate of different separation methods was studied,ensuring the accuracy and reproducibility of test results.The optimized method is linear in range from 1.0-25.0 mg/L,with a correlation coefficient R^(2)=0.9998,which meets the requirements of CA chips with a milligram-level content test.Compared with the existing ICP method,component analysis results of CA chips obtained by spectrophotometry are closer to real component content in samples and have satisfactory accuracy.Moreover,as its application in miniaturized explosive systems,the ignition ability of CA chips with different component contents for direct ink writing CL-20 and the corresponding mechanism was studied.This study provided a basis and idea for the design and performance evaluation of CA chips in miniaturized explosive systems.

关键词： Copper-based azide chips Spectrophotometry Separation method Quantitative analysis Ignition ability

Printable,flexible ceramic fiber paper based on electrospinning

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第6期43卷 2739-2746页

作者： Yong-Shuai Xie Yuan Cheng Yang Lyu Rui Li Jie-Cai Han National key laboratory of Science and technology on Advanced Composites in Special Environments Harbin Institute of Technology state key laboratory of Intelligent Manufacturing Equipment and technology Huazhong University of Science and Technology

Based on the fact that it is challenging for the polymer flexible circuit substrates to meet the requirements of serving in high-temperature environments,this work proposed the idea of using printable ceramic fiber paper as a high-temperature flexible circuit substrate.A ceramic fiber paper with all ceramic components had been developed via electrospinning,solving the problems of low strength and severe strength drop at high temperatures of traditional ceramic fiber paper.The tensile strength of the prepared ceramic fiber paper is 2.63 MPa,and the reliable service temperature is 1200℃.Its bulk density is about 1.5 times that of traditional ceramic fiber paper.It can be printed with patterns by commercial inkjet printers like ordinary printing paper and has excellent printability.The feasibility of ceramic fiber paper as a flexible circuit substrate was verified by constructing a simple circuit.When the fiber paper is significantly bent,the circuit still forms a complete path,which proves that it has a strong application potential for high-temperature flexible circuit substrate and is expected to promote the development of flexible electronic devices serving at extreme high-temperature environments.

关键词： Ceramic fiber paper High temperature Inkjet printing Flexible electronic

Reactive molecular dynamics insight into the thermal decomposition mechanism of 2,6-Bis(picrylamino)-3,5-dinitropyridine

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Defence technology（防务技术） 2024年第3期33卷 134-146页

作者： Jianbo Fu Hui Ren Xinzhou Wu Yongjin Chen Mi Zhang Yazhi Cheng state key laboratory of Explosion Science and technology Beijing Institute of TechnologyBeijing 100081China

2,6-bis(picrylamino)-3,5-dinitropyridine(PYX)has excellent thermostability,which makes its thermal decomposition mechanism receive much attention.In this paper,the mechanism of PYX thermal decomposition was investigated thoroughly by the ReaxFF-lg force field combined with DFT-B3LYP(6-311++G)method.The detailed decomposition mechanism,small-molecule product evolution,and cluster evolution of PYX were mainly analyzed.In the initial stage of decomposition,the intramolecular hydrogen transfer reaction and the formation of dimerized clusters are earlier than the denitration reaction.With the progress of the reaction,one side of the bitter amino group is removed from the pyridine ring,and then the pyridine ring is cleaved.The final products produced in the thermal decomposition process are CO_(2),H_(2)O,N_(2),and H_(2).Among them,H_(2)O has the earliest generation time,and the reaction rate constant(k_(3))is the largest.Many clusters are formed during the decomposition of PYX,and the formation,aggregation,and decomposition of these clusters are strongly affected by temperature.At low temperatures(2500 K-2750 K),many clusters are formed.At high temperatures(2750 K-3250 K),the clusters aggregate to form larger clusters.At 3500 K,the large clusters decompose and become small.In the late stage of the reaction,H and N in the clusters escaped almost entirely,but more O was trapped in the clusters,which affected the auto-oxidation process of PYX.PYX's initial decomposition activation energy(E_(a))was calculated to be 126.58 kJ/mol.This work contributes to a theoretical understanding of PYX's entire thermal decomposition process.

关键词： PYX Thermal decomposition ReaxFF-lg MD simulations Excellent thermostable explosives

Propagation Properties of Shock Waves in Polyurethane Foam based on Atomistic Simulations

在线全文

学校读者我要写书评

暂无评论

Defence technology（防务技术） 2024年第1期31卷 117-129页

作者： Zhiqiang Hu Jianli Shao Shiyu Jia Weidong Song Cheng Wang state key laboratory of Explosion Science and technology Beijing Institute of TechnologyBeijing 100081China

Porous materials are widely used in the field of protection because of their excellent energy absorption characteristics.In this work,a series of polyurethane microscopic models are established and the effect of porosity on the shock waves is studied with classical molecular dynamics simulations.Firstly,shock Hugoniot relations for different porosities are obtained,which compare well with the experimental data.The pores collapse and form local stress wave,which results in the complex multi-wave structure of the shock wave.The microstructure analysis shows that the local stress increases and the local velocity decreases gradually during the process of pore collapse to complete compaction.Finally,it leads to stress relaxation and velocity homogenization.The shock stress peaks can be fitted with two exponential functions,and the amplitude of attenuation coefficient decreases with the increase of density.Besides,the pore collapse under shock or non-shock are discussed by the entropy increase rate of the system.The energy is dissipated mainly through the multiple interactions of the waves under shock.The energy is dissipated mainly by the friction between atoms under non-shock.

关键词： Polyurethane foam Shock wave Attenuation Atomistic simulation

Enhanced structural damage behavior of liquid-filled tank by reactive material projectile impact

在线全文

学校读者我要写书评

暂无评论

Defence technology（防务技术） 2024年第1期31卷 211-229页

作者： Jianwen Xie Yuanfeng Zheng Zhenyang Liu Chengzhe Liu Aoxin Liu Pengwan Chen Haifu Wang state key laboratory of Explosion Science and technology Beijing Institute of TechnologyBeijing 100081China

A series of ballistic experiments were performed to investigate the damage behavior of high velocity reactive material projectiles(RMPs) impacting liquid-filled tanks,and the corresponding hydrodynamic ram(HRAM) was studied in detail.PTFE/Al/W RMPs with steel-like and aluminum-like densities were prepared by a pressing/sintering process.The projectiles impacted a liquid-filled steel tank with front aluminum panel at approximately 1250 m/s.The corresponding cavity evolution characteristics and HRAM pressure were recorded by high-speed camera and pressure acquisition system,and further compared to those of steel and aluminum projectiles.Significantly different from the conical cavity formed by the inert metal projectile,the cavity formed by the RMP appeared as an ellipsoid with a conical front.The RMPs were demonstrated to enhance the radial growth velocity of cavity,the global HRAM pressure amplitude and the front panel damage,indicating the enhanced HRAM and structural damage behavior.Furthermore,combining the impact-induced fragmentation and deflagration characteristics,the cavity evolution of RMPs under the combined effect of kinetic energy impact and chemical energy release was analyzed.The mechanism of enhanced HRAM pressure induced by the RMPs was further revealed based on the theoretical model of the initial impact wave and the impulse analysis.Finally,the linear correlation between the deformation-thickness ratio and the non-dimensional impulse for the front panel was obtained and analyzed.It was determined that the enhanced near-field impulse induced by the RMPs was the dominant reason for the enhanced structural damage behavior.

关键词： Reactive material projectile Hydrodynamic ram Enhanced structural damage Liquid-filled tank Impact

Assessing the energy release characteristics during the middle detonation reaction stage of aluminized explosives

在线全文

学校读者我要写书评

暂无评论

Defence technology（防务技术） 2024年第3期33卷 270-277页

作者： Kun Yang Lang Chen Danyang Liu Bin Zhang Jianying Lu Junying Wu state key laboratory of Explosion Science and technology Beijing Institute of TechnologyBeijing 100081China

Afterburning behind the detonation front of an aluminized explosive releases energy on the millisecond timescale,which prolong the release of detonation energy and the energy release at different stages also shows significant differences.However,at present,there are few effective methods for evaluating the energy release characteristics of the middle reaction stage of such explosives,which can have a duration of tens to hundreds of microseconds.The present work demonstrates an approach to assessing the midstage of an aluminized explosive detonation based on a water push test employing a high degree of confinement.In this method,the explosive is contained in a steel cylinder having one end closed that is installed at the bottom of a transparent water tank.Upon detonation,the gaseous products expand in one direction while forcing water ahead of them.The resulting underwater shock wave and the interface between the gas phase products and the water are tracked using an ultra-high-speed framing and streak camera.The shock wave velocity in water and the expansion work performed by the gaseous detonation products were calculated to assess the energy release characteristics of aluminized explosives such as CL-20 and RDX in the middle stage of the detonation reaction.During the middle stage of the detonation process of these aluminized explosives,the aluminum reaction reduced the attenuation of shock waves and increased the work performed by gas phase products.A higher aluminum content increased the energy output while the presence of oxidants slowed the energy release rate.This work demonstrates an effective means of evaluating the performance of aluminized explosives.

关键词： Aluminized explosive Non-ideal detonation Water push test Energy release

Experimental and numerical demonstration of hierarchical time-delay reservoir computing based on cascaded VCSELs with feedback and multiple injections

在线全文

学校读者我要写书评

暂无评论

Science China(Information Sciences) 2024年第2期67卷 279-290页

作者： Xingxing GUO Shuiying XIANG Xingyu CAO Biling GU state key laboratory of Integrated Service Networks Xidian University state key Discipline laboratory of Wide Bandgap Semiconductor technology School of MicroelectronicsXidian University

In this paper, we propose and demonstrate experimentally and numerically a hierarchical timedelay optical reservoir computing(RC) system based on cascaded vertical-cavity surface-emitting lasers(VCSELs) with feedback and multiple injections. The prediction performance characteristics of the hierarchical time-delay RC system based on cascaded VCSELs under different reservoir layers are compared.Evidently, the prediction performance of the hierarchical time-delay RC system is first improved and saturates as the number of reservoir layers increases. Besides, the impacts of key factors on predicting the hierarchical time-delay RC system are also analyzed in detail experimentally and numerically. This proposed hierarchical time-delay RC system based on VCSELs is useful for the further development of RC systems and may be beneficial to improve the ability of RC systems to solve more complex problems.

关键词： vertical-cavity surface-emitting laser reservoir computing neuromorphic photonics time-delay system information processing

Discontinuous phase diagram of amorphous carbons

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

National Science Review 2024年第4期11卷 164-171页

作者： YinBo Zhu ZhouYu Fang ZhongTing Zhang HengAn Wu CAS key laboratory of Mechanical Behavior and Design of Materials Department of Modern MechanicsUniversity of Science and Technology of China state key laboratory of Nonlinear Mechanics Institute of Mechanics Chinese Academy of Sciences

The short-range order and medium-range order of amorphous carbons demonstrated in experiments allow us to rethink whether there exist intrinsic properties hidden by atomic disordering. Here we presented six representative phases of amorphous carbons（0.1–3.4 g/cm3）, namely, disordered graphene network（DGN）, high-density amorphous carbon（HDAC）, amorphous diaphite（a-DG）, amorphous diamond（a-D）, paracrystalline diamond（p-D）, and nano-polycrystalline diamond（NPD）, respectively, classified by their topological features and microstructural characterizations that are comparable with experiments. To achieve a comprehensive physical landscape for amorphous carbons, a phase diagram was plotted in the sp3/sp2versus density plane, in which the counterintuitive discontinuity originates from the inherent difference in topological microstructures, further guiding us to discover a variety of phase transitions among different amorphous carbons. Intriguingly, the power law, log（sp3/sp2） ∝ ρn, hints at intrinsic topology and hidden order in amorphous carbons, providing an insightful perspective to reacquaint atomic disorder in non-crystalline carbons.

关键词： amorphous carbons disordered carbons phase diagram microstructural topology phase transition

Electrostatic generator enhancements for powering IoT nodes via efficient energy management

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Microsystems & Nanoengineering 2024年第2期10卷 143-152页

作者： Zibo Wu Zeyuan Cao Junchi Teng Rong Ding Jiani Xu Xiongying Ye state key laboratory of Precision Measurement technology and Instruments Department of Precision InstrumentTsinghua University100084BeijingChina

Electrostatic generators show great potential for powering widely distributed electronic devices in Internet of Things(IoT)applications.However,a critical issue limiting such generators is their high impedance mismatch when coupled to electronics,which results in very low energy utilization efficiency.Here,we present a high-performance energy management unit(EMU)based on a spark-switch tube and a buck converter with an RF inductor.By optimizing the elements and parameters of the EMU,a maximum direct current output power of 79.2 mW m^(-2)rps^(-1)was reached for a rotary electret generator with the EMU,achieving 1.2 times greater power output than without the EMU.Furthermore,the maximum power of the contact-separated triboelectric nanogenerator with an EMU is 1.5 times that without the EMU.This excellent performance is attributed to the various optimizations,including utilizing an ultralow-loss spark-switch tube with a proper breakdown voltage,adding a matched input capacitor to enhance available charge,and incorporating an RF inductor to facilitate the high-speed energy transfer process.Based on this extremely efficient EMU,a compact self-powered wireless temperature sensor node was demonstrated to acquire and transmit data every 3.5 s under a slight wind speed of 0.5 m/s.This work greatly promotes the utilization of electrostatic nanogenerators in practical applications,particularly in IoT nodes.

关键词： IoT power generator