检索结果-南通市图书馆

Nuclear Science and Techniques 2024年第3期35卷 40-52页

作者： Ding-Han Zhu Xiong Zhang Xiao-Qiang Li Peng Li Yan-Bin Wang Shuang Zhang state key laboratory of NBC protection for Civilian Beijing 102205China

In high-altitude nuclear detonations,the proportion of pulsed X-ray energy can exceed 70%,making it a specific monitoring signal for such *** pulsed X-rays can be captured using a satellite-borne X-ray detector following atmospheric *** quantitatively analyze the effects of different satellite detection altitudes,burst heights,and transmission angles on the physical processes of X-ray transport and energy fluence,we developed an atmospheric transmission algorithm for pulsed X-rays from high-altitude nuclear detonations based on scattering *** proposed method is an improvement over the traditional analytical method that only computes direct-transmission *** traditional analytical method exhibits a maximum relative error of 67.79% compared with the Monte Carlo *** improved method reduces this error to within 10% under the same conditions,even reaching 1% in certain ***,its computation time is 48,000 times faster than that of the Monte Carlo *** results have important theoretical significance and engineering application value for designing satellite-borne nuclear detonation pulsed X-ray detectors,inverting nuclear detonation source terms,and assessing ionospheric effects.

关键词： High-altitude nuclear detonation Atmospheric transmission Pulsed X-rays Scattering correction Analytical method Monte Carlo method

Microstructure and Internal Friction Behavior of Laser 3D Printed Fe-Based Amorphous Composites

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第1期37卷 196-204页

作者： Shuilong Huang Qingjun Chen Li Ji Kan Wang Guosheng Huang School of Material Science and Engineering Nanchang Hangkong UniversityNanchang330063China state key laboratory for Marine corrosion and protection Luoyang Ship Material Research Institute(LSMRI)Qingdao266237China

Laser 3D printing,also known as laser additive manufacturing(LAM),is favored for its ability to form bulk metallic glass(BMG)and its composite materials(BMGcs)with freeform *** this work,two different kinds of Fe_(41)Co_(7)Cr_(15)Mo_(14)C_(15)B_(6)Y_(2)amorphous coatings(A and B)were prepared by using LAM technology under air-and water-cooled conditions,respectively;meanwhile,to reduce the cracks generated due to the residual thermal stresses,coating C obtained by air-sweep annealing of B with a low energy-density *** morphology and amorphous content and microstructure of the coatings were investigated,the results show many cracks in coating B deposited under water-cooled conditions,and its microstructure shows an amorphous-crystal-nanocrystalline mixed *** was suppressed in coating C,obtained by air-sweep annealing based on coating B,but the amorphous content was reduced from 32.6 to 13.4%.And the hardness and corrosion resistance of the coating will increase with the increase in the amorphous ***,the internal friction behavior of a BMGcs was prepared on the basis of the process of sample C is compared with that of as-cast amorphous *** results show that the low temperature internal friction behavior of BMGcs is affected by the defects produced during printing,and the high temperature internal friction behavior is affected by the precipitated hard phase.

关键词： Laser 3D printing Amorphous coating Microstructure corrosion resistance Internal friction behavior

Degradation and biocompatibility of one-step electrodeposited magnesium thioctic acid/magnesium hydroxide hybrid coatings on ZE21B alloys for cardiovascular stents

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第1期12卷 120-138页

作者： Zhao-Qi Zhang Bing-Zhi Li Pei-Duo Tong Shao-Kang Guan Li Wang Zheng-Hui Qiu Cun-Guo Lin Rong-Chang Zeng School of Material Science and Engineering&Henan key laboratory of Advanced Magnesium Alloy&key laboratory of Materials Processing and Mold Technology(Ministry of Education) Zhengzhou University100 Science RoadZhengzhou 450001China state key laboratory for Marine corrosion and protection Luoyang Ship Material Research InstituteQingdao 266101China corrosion laboratory for Light Metals College of Material Science and EngineeringShandong University of Science and TechnologyQingdao 266590China

Constructing a functional hybrid coating appears to be a promising strategy for addressing the poor corrosion resistance and insufficient endothelialization of Mg-based ***,the steps for preparing composite coatings are usually complicated and ***,a novel composite coating,composed of bioactive magnesium thioctic acid(MTA)layer formed by deposition and corrosion-resistant magnesium hydroxide(Mg(OH)_(2))layer grown in situ,is simply fabricated on ZE21B alloys via one-step *** electron microscopy(SEM)shows that the electrodeposited coating has a compact and uniform *** the high adhesion of the MTA/Mg(OH)_(2)hybrid coating is also confirmed by the micro-scratch *** test,scanning kelvin probe(SKP),and hydrogen evolution measurement indicate that the hybrid coating effectively reduces the degradation rate of Mg *** experiment and cell culture trial detect that the composite coating is of fine ***,the preparation mechanism of MTA/Mg(OH)_(2)hybrid coatings is discussed and *** coating shows a great potential application for cardiovascular stents.

关键词： Magnesium alloy corrosion resistance Hybrid coating Endothelialization Biocompatibility

Empirical model of concrete block fragment behavior under explosion loads

在线全文

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2024年第8期67卷 2515-2529页

作者： YANG Shuai NING JianGuo REN HuiLan XU XiangZhao state key laboratory of Explosion Science and Safety protection Beijing Institute of TechnologyBeijing 100081China

Concrete structures undergo integral fragmentation under explosion loads. The fragmentation degree and particle-size distribution of concrete blocks under explosion loads must be considered during mining to ensure safety. In this study, the impulse is calculated based on the relationship between overpressure and time, and the impact energy of the explosion wave is obtained based on blast theory. Subsequently, the Mohr-Coulomb shear strength fracture criterion is introduced to determine the ultimate shear stress of the concrete materials, and an empirical model that can effectively calculate the energy consumption of concrete blocks under explosion loads is established. Furthermore, concrete fragments with different particle sizes under explosion scenarios are quantitatively predicted with the principle of energy conservation. Finally, explosion tests with different top standoff distances are conducted, and the concrete fragments after the explosion tests are recovered, sieved, weighed, and counted to obtain experimental data. The effectiveness of the fragment empirical model is verified by comparing the model calculation results with the experimental data. The proposed model can be used as a reference for civil blasting, protective engineering design, and explosion-damage assessment.

关键词： concrete structures explosion loads fragment behavior empirical model

同方期刊数据库

The risk factors and threshold level of subchronic inhalation exposure of reclaimed water

在线全文

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第3期137卷 639-650页

作者： Jiayang Kong Yun Lu Yunru Ren Menghao Chen Gang Liu Liangliang Shi state key Joint laboratory of Environment Simulation and Pollution Control State Environment Protection Key Laboratory of Microorganism Application and Risk ControlSchool of EnvironmentTsinghua UniversityBeijing 100084China

Inhalation of reclaimed water is known to cause lung infammation,and free endotoxins have been shown to be a major risk factor for acute *** exposure has also been shown to induce infammatory responses with visible tissue ***,subchronic risk factors have yet to be identified,and a threshold for the protection of occupational populations during urban reuse is *** this study,potential risk factors in reclaimed water were examined by subchronic exposure with fractionated reclaimed water,and the health risk threshold was tested with a series of diluted reclaimed ***,following a 12-week exposure,macromolecules and microorganisms were found to be two major risk factors in reclaimed water that could cause pulmonary infammation,including increased proportion of polymorphonuclear leukocytes in bronchoalveolar fuid,formation of inducible bronchus-associated lymphoid tissue,and elevation of Immunoglobulin A ***,infammation persisted after a 4-week recovery *** calculated threshold of reclaimed water exposure for mice was 31.8 Endotoxin Unit(EU)/(kg·day)under when exposed to 50%additional relative humidity from reclaimed water at 25℃ for 2 hr/***,the subchronic threshold estimate for humans under the same exposure conditions was found to be 12.2 EU/(kg·day),corresponding to endotoxin levels of 61.7 EU/mL in reclaimed *** threshold level of endotoxin was lower than that in most non-potable reclaimed *** findings of this study suggest that occupational exposure of reclaimed water can serve as a potential risk to workers.

关键词： Reclaimed water Inhalation exposure Risk factor Threshold Infammation Endotoxin

Effect of bipolar-plates design on corrosion,mass and heat transfer in proton-exchange membrane fuel cells and water electrolyzers:A review

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第7期31卷 1599-1616页

作者： Jiuhong Zhang Xiejing Luo Yingyu Ding Luqi Chang Chaofang Dong key laboratory for corrosion and protection(MOE) Institute for Advanced Materials and TechnologyUniversity of Science and Technology BeijingBeijing 100083China Beijing Advanced Innovation Center for Materials Genome Engineering Beijing 100083China

Attaining a decarbonized and sustainable energy system,which is the core solution to global energy issues,is accessible through the development of hydrogen ***-exchange membrane water electrolyzers(PEMWEs)are promising devices for hydrogen production,given their high efficiency,rapid responsiveness,and *** plates account for a relatively high percentage of the total cost and weight compared with other components of ***,optimization of their design may accelerate the promotion of *** paper reviews the advances in materials and flow-field design for bipolar ***,the working conditions of proton-exchange membrane fuel cells(PEMFCs)and PEMWEs are compared,including reaction direction,operating temperature,pressure,input/output,and ***,the current research status of bipolar-plate substrates and surface coatings is summarized,and some typical channel-rib flow fields and porous flow fields are ***,the effects of materials on mass and heat transfer and the possibility of reducing corrosion by improving the flow field structure are ***,this review discusses the potential directions of the development of bipolar-plate design,including material fabrication,flow-field geometry optimization using threedimensional printing,and surface-coating composition optimization based on computational materials science.

关键词： bipolar-plates flow design mass and heat transfer corrosion water electrolyzers fuel cells

Shape optimisation of basin insulator for DC gas insulated switchgear/gas insulated transmission lines based on artificial bee colony algorithm

在线全文

学校读者我要写书评

暂无评论

High Voltage 2024年第2期9卷 275-286页

作者： Yi Luo Shiyi Mao Ju Tang Zijun Pan Cheng Pan state key laboratory of Power Grid Environmental protection School of Electrical Engineering and AutomationWuhan UniversityWuhanChina

The surface charge accumulation on the basin insulator is a particular problem in high-voltage direct current(HVDC)gas insulated switchgears(GIS)and gas insulated trans-mission lines(GIL),which restricts the development and application of extra/ultra high-voltage(EHV/UHV)*** surface charge distribution and anti-flashover performance are closely related to the insulator *** obtain the optimal basin insulator,a shape optimisation model based on artificial bee colony algorithm was established,and the minimisation objective functions based on capacitive(initial)electric field distribution and resistive(steady-state)electric field distribution were respectively *** optimisation results of the two objective functions were calculated,and the electric field and charge distribution on the surface of the insulator before and after optimisation were evaluated and compared using the simulation *** results indicated that the optimisation based on the capacitive electric field can significantly inhibit the surface charge accumulation,and the optimised insulator can significantly reduce the surface normal electric field and make the distribution of the tangential electric field more uniform,and the maximum tangential electric field can be reduced by 10%;the optimisation based on resistive electric field can achieve similar results,but requires more computational *** on the results,the‘anti-charge’basin insulator structure suitable for the DC field was given.

关键词： insulator artificial charge

Optimal mining sequence for coal faces under a bedding slope:insight from landslide prevention

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Mountain Science 2024年第5期21卷 1775-1798页

作者： LI Qingmiao ZHAO Jianjun LI Zhichao DENG Jie ZUO Jing LAI Qiyi state key laboratory of Geohazard Prevention and Geoenvironment protection Chengdu University of TechnologyChengdu 610059China

Repetitive mining beneath bedding slopes is identified as a critical factor in geomorphic disturbances, especially landslides and surface subsidence. Prior research has largely concentrated on surface deformation in plains due to multi-seam coal mining and the instability of natural bedding slopes, yet the cumulative impact of different mining sequences on bedding slopes has been less explored. This study combines drone surveys and geological data to construct a comprehensive three-dimensional model of bedding slopes. Utilizing FLAC3D and PFC2D models, derived from laboratory experiments, it simulates stress, deformation, and failure dynamics of slopes under various mining sequences. Incorporating fractal dimension analysis, the research evaluates the stability of slopes in relation to different mining sequences. The findings reveal that mining in an upslope direction minimizes disruption to overlying strata. Initiating extraction from lower segments increases tensile-shear stress in coal pillar overburdens, resulting in greater creep deformation towards the downslope than when starting from upper segments, potentially leading to localized landslides and widespread creep deformation in mined-out areas. The downslope upward mining sequence exhibits the least fractal dimensions, indicating minimal disturbance to both strata and surface. While all five mining scenarios maintain good slope stability under normal conditions, recalibrated stability assessments based on fractal dimensions suggest that downslope upward mining offers the highest stability under rainfall, contrasting with the lower stability and potential instability risks of upslope downward mining. These insights are pivotal for mining operations and geological hazard mitigation in multi-seam coal exploitation on bedding slopes.

关键词： Bedding rock landslides Mining-induced deformation Bedding slope stability Underground mining sequences Fractal-based strength reduction method

Challenges and perspectives of air pollution control in China

在线全文

学校读者我要写书评

暂无评论

Frontiers of Environmental Science & Engineering 2024年第6期18卷 9-16页

作者： Bin Zhao Shuxiao Wang Jiming Hao state key Joint laboratory of Environmental Simulation and Pollution Control School of EnvironmentTsinghua UniversityBeijing 100084China state Environmental protection key laboratory of Sources and Control of Air Pollution Complex Beijing 100084China

Air pollution is one of the most challenging environmental issues in the *** has achieved remarkable success in improving air quality in last decade as a result of aggressive air pollution control ***,the average fine particulate matter(PM2.5)concentration in China is still about six times of the World Health Organization(WHO)Global Air Quality Guidelines(AQG)and causing significant human health *** emission reductions of multiple air pollutants are required for China to achieve the *** we identify the major challenges in future air quality improvement and propose corresponding control *** main challenges include the persistently high health risk attributed to PM2.5 pollution,the excessively loose air quality standards,and coordinated control of air pollution,greenhouse gases(GHGs)emissions and emerging *** further improve air quality and protect human health,a health-oriented air pollution control strategy shall be implemented by tightening the air quality standards as well as optimizing emission reduction pathways based on the health risks of various *** the meantime,an“oneatmosphere”concept shall be adopted to strengthen the synergistic control of air pollutants and GHGs and the control of non-combustion sources and emerging pollutants shall be enhanced.

关键词： Air pollution China Health impact Air quality standards GHGs Emerging pollutants

LPCS Ni-Zn-Al_(2)O_(3) Intermediate Layer Enhanced SPS NiCr-Cr_(3)C_(2) Coating with Higher corrosion and Wear Resistances

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2024年第1期39卷 188-195页

作者：白杨 LI Yan XING Lukuo LI Xiangbo WANG Zhenhua state key laboratory of Marine Coatings Marine Chemical Research Institute Co.Ltd.Qingdao 266071China College of Mechanical and Electrical Engineering University of China Petroleum(East China)Qingdao 266580China Science and Technology on Marine corrosion and protection laboratory Luoyang Ship Materials Research InstituteQingdao 266101China

The double-layer NiCr-Cr_(3)C_(2)/Ni-Zn-Al_(2)O_(3) coatings with sufficient corrosion and wear resistance were prepared on low carbon steel *** intermediate layers Ni-Zn-Al_(2)O_(3) were fabricated by using low-pressure cold spray (LPCS) method to improve the salt fog corrosion resistance properties of the supersonic plasma spray (SPS) NiCr-Cr_(3)C_(2) *** friction and wear performance for the double-layer and single-layer NiCr-Cr_(3)C_(2) coatings were carried out by line-contact reciprocating sliding,*** with the coating surface analysis techniques,the effect of the salt fog corrosion on the tribological properties of the double-layer coatings was *** results showed that the double-layer coatings exhibited better wear resistance than that of the single-layer coatings,due to the better corrosion resistance of the intermediate layer;the wear mass losses of the double-layer coatings was reduced by 70%than that of the single layer coatings and the wear mechanism of coatings after salt fog corrosion conditions is mainly corrosion wear.

关键词： low-pressure cold spray NiCr-Cr_(3)C_(2)coating wear behavior salt fog corrosion