检索结果-南通市图书馆

Micro-strain regulation strategy to stabilize perovskite lattice based on the categories and impact of strain on perovskite solar cells

引用

Journal of Energy Chemistry 2025年第1期100卷 578-604页

作者： Caixia Li Wenwu Liu Shiji Da Lingbin Kong Fen Ran state key laboratory of Advanced processing and Recycling of nonferrous metals Lanzhou University of Technology School of Materials Science and Engineering Lanzhou University of Technology

Photovoltaic metal halide perovskite solar cells(PSCs) convert light to electricity more efficiently than crystalline silicon cells, and the cost of materials used to make them is lower than that of silicon *** efficiency is not a core issue affecting the application of perovskite solar cells in special *** present, stability is the major technical encounters that hinders its further commercial development. Microstrain in PSCs is currently a significant factor responsible for the device's instability. Strain-induced ion migration is widely believed to accelerate perovskite degradation even when external stimuli are ***, it is imperative to study strain to enhance the stability of PSCs. This paper reviews recent developments to understand strain's origin and effect mechanisms on performance of PSCs, including ion migration,failure behavior, defect formation, and its effect on photoelectric properties, stability, and ***, several well-known strain management strategies are systematically introduced based on the strain effect mechanism and strain engineering on the film, providing more clues for further preparation with increased stability. The manipulation of external physical strain applied from films to entire devices has been extensively studied. Furthermore, recommendations for future research directions and chemical approaches have been provided. It is emphasized that strain engineering plays a crucial role in improving the efficiency and longevity of PSCs. Tensile strain causes rapid degradation, while moderate compressive strain and external strain control could improve properties and stability. Efforts should focus on controlling compressive strain to mitigate residual tensile strain and introducing it in a controlled manner. Future research endeavors may focus on exploring these pathways to improve the efficiency and lifespan of PSCs.

关键词： Halide perovskite solar cells Strain origins Strain effects Strain management

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Unraveling the impacts of intermolecular interaction on morphology evolution for highly efficient organic solar cells and modules

引用

Science China Chemistry 2025年第1期68卷 264-272页

作者： Xueqing Ma Yingying Cheng Yuqiang Liu Xinming Zheng Guangliu Ran Hongxiang Li Xinyue Cui Andong Zhang Wenkai Zhang Pei Cheng Wenchao Huang Zhishan Bo Beijing key laboratory of Energy Conversion and Storage Materials College of Chemistry Beijing Normal University College of Textiles and Clothing State Key Laboratory of Bio-fibers and Eco-textiles Qingdao University key state laboratory of Advanced Technology for Materials Synthesis and processing School of Materials Science and EngineeringWuhan University of Technology Department of Physics and Applied Optics Beijing Area Major laboratory Center for Advanced Quantum Studies Beijing Normal University state key laboratory of Polymer Materials Engineering College of Polymer Science and Engineering Sichuan University

Understanding the effect of intermolecular interaction on the growth dynamic of active layers is critical for advancing organic solar cells(OSCs). However, the diverse structure of donors and acceptors makes the research challenging. Additives with customizable structures and properties could simplify this complexity. Herein, we meticulously tailor two additives of 3,4-ethylenedioxythiophene(EDOT) and 2,5-dibromo-3,4-ethylenedioxythiophene(DBEDOT), possessing distinct intermolecular interaction features to elaborate the inherent relationship. It is found that varied interaction strengths can alter film formation processes. The enhanced intermolecular interaction between the DBEDOT and non-fullerene acceptor BTP-e C9-4F results in pre-aggregation and longer crystallization duration of BTP-e C9-4F, facilitating the formation of films with compact molecular packing and decent phase separation. Thus, exciton dissociation and charge transport become more efficient. Finally, devices processed with DBEDOT exhibit a remarkable power conversion efficiency of 19.35% in small-area OSCs and 14.11% in bladecoated 5 cm × 5 cm organic solar mini-modules. Especially, OSCs can maintain 80% of their initial efficiency after continuous annealing at 85 °C for over 2,100 h.

关键词： organic solar cell non-fullerene acceptor film growth molecular packing intermolecular interaction

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Effect of order–disorder transition on thermodynamic and electronic properties of σ and χ phases in W–Re alloy: the first-principles calculation

引用

Tungsten 2025年第1期7卷 195-213页

作者： Zhi-Peng Zhu Dian Jia William Yi Wang Jun-Lei Yin Xing-Yu Gao Shu-Feng Yang Hai-Feng Song Jin-Shan Li state key laboratory of Solidification processing Northwestern Polytechnical University laboratory of Computational Physics Institute of Applied Physics and Computational Mathematics School of metallurgical and Ecological Engineering University of Science and Technology Beijing

The Tungsten-Rhenium(W-Re) alloys,celebrated for their high melting point,strength at elevated temperatures,electrical resistivity,and radiation resistance,have been widely utilized in high-temperature components,aerospace,electronics,and nuclear *** constituents of the topologically close-packed(TCP) phases,the sigma phase(σ) and chi phase(χ) formed within W-Re alloys wield considerable influence on the mechanical properties and the stability of the *** calculations were utilized in the present work to explore the structural,thermodynamic,and electronic properties of both ordered and disordered configurations within the σ and χ phases,culminating in a systematic elucidation of the higher phase stability exhibited by the ordered *** is found that the bulk modulus of these two phases is directly proportional to the concentration of Re in the alloy,while the equilibrium volume is inversely *** thermodynamic parameters of the σ and χ phases are calculated via the mean-field potential *** similar trends observed in the isobaric heat capacity,enthalpy increment,and entropy change curves for these two phases suggest they possess comparable thermodynamic *** is noteworthy that the contribution of ionic vibrations predominantly affects the isobaric heat capacity,while the contribution of thermal electronic excitations increases linearly with *** the structure and thermodynamic properties of TCP phases in W-Re alloys at low temperatures has profound significance for optimizing material performance,microstructures features,establishing theoretical foundations,and predicting material behavior.

关键词： First-principles calculations Phase stability TCP phases Thermodynamic properties W–Re alloy

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Effect of Ti Additions on Mechanical and Thermodynamic Properties of W-Ti Alloys: A First-principles Study

引用

Journal of Wuhan University of Technology(Materials Science) 2025年第1期40卷 246-257页

作者： ZHANG Jian NIE Wei HUANG Jin ZHU Ke LIU Ruxia ZHANG Ruizhi LUO Guoqiang SHEN Qiang state key laboratory of Advanced Technology for Materials Synthesis and processing Wuhan University of TechnologyWuhan 430070China Institute for Carbon Neutrality University of Science and Technology BeijingBeijing 100083China

The mechanical and thermodynamic properties of W-Ti alloys(including W_(15)Ti_(1),W_(14)Ti_(2),W_(12)Ti_(4) and W_(8)Ti_(8) alloys)were investigated by the first-principles approach based on density functional *** results indicate that W-Ti alloys except W_(8)Ti_(8) are thermodynamically *** modulus and hardness of W-Ti alloys are smaller than those of pure tungsten and gradually decrease with increasing Ti ***,their B/G ratios and Poisson's ratios exceed those of pure tungsten,suggesting that the introduction of Ti decreases the mechanical strength while enhancing the ductility of W-Ti *** thermal expansion coefficients for W-Ti alloys all surpass those of pure tungsten,indicating that the introduction of titanium exacerbates the thermal expansion behavior of W-Ti ***,elevated pressure has the capacity to suppress the thermal expansion tendencies in titanium-doped tungsten *** study offers theoretical insights for the design of nuclear materials by exploring the mechanical and thermodynamic properties of W-Ti alloys.

关键词： first-principles mechanical properties thermodynamic properties tungsten-titanium alloys

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Efficient and Stable Photoassisted Lithium‑Ion Battery Enabled by Photocathode with Synergistically Boosted Carriers Dynamics

引用

Nano-Micro Letters 2025年第3期17卷 440-454页

作者： Zelin Ma Shiyao Wang Zhuangzhuang Ma Juan Li Luomeng Zhao Zhihuan Li Shiyuan Wang Yazhou Shuang Jiulong Wang Fang Wang Weiwei Xia Jie Jian Yibo He Junjie Wang Pengfei Guo Hongqiang Wang state key laboratory of Solidification processing Center for Nano Energy MaterialsSchool of Materials Science and EngineeringNorthwestern Polytechnical University and Shaanxi Joint Laboratory of Graphene(NPU)Xi’an 710072People’s Republic of China state key laboratory of Solidification processing School of Materials Science and Engineering DepartmentNorthwestern Polytechnical UniversityXi’an 710072People’s Republic of China state key laboratory of Solidification processing Center of Advanced Lubrication and Seal MaterialsSchool of Materials Science and EngineeringNorthwestern Polytechnical UniversityXi’an 710072People’s Republic of China Research and Development Institute of Northwestern Polytechnical University in Shenzhen Shenzhen 518063People’s Republic of China key laboratory of Applied Surface and Colloid Chemistry Shaanxi Key Laboratory for Advanced Energy DevicesShaanxi Engineering Lab for Advanced Energy TechnologySchool of Materials Science and EngineeringNational Ministry of EducationShaanxi Normal UniversityXi’an 710119People’s Republic of China

Efficient and stable photocathodes with versatility are of significance in photoassisted lithium-ion batteries(PLIBs),while there is always a request on fast carrier transport in electrochemical active *** work proposes a general approach of creating bulk heterojunction to boost the carrier mobility of photocathodes by simply laser assisted embedding of plasmonic *** employed in PLIBs,it was found effective for synchronously enhanced photocharge separation and transport in light charging ***,experimental photon spectroscopy,finite difference time domain method simulation and theoretical analyses demonstrate that the improved carrier dynamics are driven by the plasmonic-induced hot electron injection from metal to TiO_(2),as well as the enhanced conductivity in TiO2 matrix due to the formation of oxygen vacancies after Schottky *** from these merits,several benchmark values in performance of TiO2-based photocathode applied in PLIBs are set,including the capacity of 276 mAh g^(−1)at 0.2 A g^(−1)under illumination,photoconversion efficiency of 1.276%at 3 A g^(−1),less capacity and Columbic efficiency loss even through 200 *** results exemplify the potential of the bulk heterojunction strategy in developing highly efficient and stable photoassisted energy storage systems.

关键词： Photoassisted lithium-ion batteries Bulk heterojunction Carrier dynamics TiO2 nanofiber Plasmonic metal nanocrystals

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Enhanced rate capability and cycle stability of Ti2C MXene for sodium storage through an aniline molecules welding strategy

引用

Tungsten 2025年第1期7卷 161-171页

作者： Hao Chen Ya-Qin Wang Dong-Ting Zhang Bei Zhao Min-Peng Li Chen-Yang Li Tian-Peng Xu Mao-Cheng Liu state key laboratory of Advanced processing and Recycling of Non-Ferrous metals Lanzhou University of Technology School of Materials Science and Engineering Lanzhou University of Technology School of Computer and Communication Technology Lanzhou University of Technology

MXenes obtained significant attention in the field of energy storage devices due to their characteristic layered structure,modifiable surface functional groups,large electrochemically active surface,and regulable interlayer ***,the self-restacking and sluggish ions diffusion kinetics performance of MXenes during the alkali metal ions insertion/extraction process severely impedes their cycle stability and rate *** paper proposes an aniline molecule welding strategy for welding p-phenylenediamine（PPDA） into the interlayers of Ti2C through a dehydration condensation *** welded PPDA molecules can contribute pillar effect to the layered structure of *** pillar effect effectively maintains the structural stability during the sodium ions insertion/extraction process and effectively expands the interlayer spacing of Ti2C from 1.16 to 1.38 nm,thereby enhancing ions diffusion kinetics performance and improving the long-term cycle *** Ti2C-PPDA demonstrates outstanding Na+storage capability,exhibiting a specific capacity of 100.2 mAh·g-1at a current density of 0.1 A·g-1over 960 cycles and delivering a remarkable rate capability 81.2 mAh·g-1at a current density of 5 A·*** study demonstrates that expanding interlayer spacing is a promising strategy to enhance the Na+storage capacity and improve long-term cycling stability,which provides significant guidance for the design of two-dimensional Na+storage materials with high-rate capability and cycle stability.

关键词： Diffusion kinetics Expanding interlayer spacing Rate capability Sodium ions storage Ti2C

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Boosting Oxygen Evolution Reaction Performance on NiFe‑Based Catalysts Through d‑Orbital Hybridization

引用

Nano-Micro Letters 2025年第1期17卷 281-292页

作者： Xing Wang Wei Pi Sheng Hu Haifeng Bao Na Yao Wei Luo state key laboratory of New Textile Materials and Advanced processing Technology Key Laboratory of New Textile Materials and Applications of Hubei ProvinceSchool of Materials Science and EngineeringWuhan Textile UniversityWuhan 430200People’s Republic of China College of Chemistry and Molecular Sciences Wuhan UniversityWuhan 430072People’s Republic of China

Anion-exchange membrane water electrolyzers(AEMWEs)for green hydrogen production have received intensive attention due to their feasibility of using earth-abundant NiFe-based *** introducing a third metal into NiFe-based catalysts to construct asymmetrical M-NiFe units,the d-orbital and electronic structures can be adjusted,which is an important strategy to achieve sufficient oxygen evolution reaction(OER)performance in ***,the ternary NiFeM(M:La,Mo)catalysts featured with distinct M-NiFe units and varying d-orbitals are reported in this *** and theoretical calculation results reveal that the doping of La leads to optimized hybridization between d orbital in NiFeM and 2p in oxygen,resulting in enhanced adsorption strength of oxygen intermediates,and reduced rate-determining step energy barrier,which is responsible for the enhanced OER *** critically,the obtained NiFeLa catalyst only requires 1.58 V to reach 1 A cm^(−2) in an anion exchange membrane electrolyzer and demonstrates excellent long-term stability of up to 600 h.

关键词： NiFe-based catalysts d-orbital coupling Oxygen evolution reaction Anion exchange membrane electrolyzer

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Crystallization Modulation and Holistic Passivation Enables Efficient Two‑Terminal Perovskite/CuIn(Ga)Se_(2)Tandem Solar Cells

引用

Nano-Micro Letters 2025年第1期17卷 205-215页

作者： Cong Geng Kuanxiang Zhang Changhua Wang Chung Hsien Wu Jiwen Jiang Fei Long Liyuan Han Qifeng Han Yi‑Bing Cheng Yong Peng state key laboratory of Advanced Technology for Materials Synthesis and processing Wuhan University of TechnologyWuhan 430070People’s Republic of China Triumph Photovoltaic Materials Co. Ltd.No.1001 Yannan AvenueHigh‑Tech Development DistrictBengbuAnhui 233000People’s Republic of China College of Materials Science and Engineering Guilin University of TechnologyGuilin 541004People’s Republic of China state key laboratory of metal Matrix Composites Shanghai Jiao Tong UniversityShanghai 200240People’s Republic of China

Two-terminal(2-T)perovskite(PVK)/CuIn(Ga)Se_(2)(CIGS)tandem solar cells(TSCs)have been considered as an ideal tandem cell because of their best bandgap matching regarding to Shockley–Queisser(S–Q)***,the nature of the irregular rough morphology of commercial CIGS prevents people from improving tandem device *** this paper,D-homoserine lactone hydrochloride is proven to improve coverage of PVK materials on irregular rough CIGS surfaces and also passivate bulk defects by modulating the growth of PVK *** addition,the minority carriers near the PVK/C60 interface and the incompletely passivated trap states caused interface recombination.A surface reconstruction with 2-thiopheneethylammonium iodide and N,N-dimethylformamide assisted passivates the defect sites located at the surface and grain ***,LiF is used to create this field effect,repelling hole carriers away from the PVK and C60 interface and thus reducing *** a result,a 2-T PVK/CIGS tandem yielded a power conversion efficiency of 24.6%(0.16 cm^(2)),one of the highest results for 2-T PVK/CIGS TSCs to our *** validation underscores the potential of our methodology in achieving superior performance in PVK/CIGS tandem solar cells.

关键词： PVK/CIGS TSCs Irregular rough surfaces Modulating the growth PVK/C60 interface recombination

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effects of the extrusion parameters on microstructure,texture and room temperature mechanical properties of extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy

引用

International Journal of Minerals,metallurgy and Materials 2025年第1期32卷 136-146页

作者： Chenjin Zhang Guangyu Yang Lei Xiao Zhiyong Kan Jing Guo Qiang Li Wanqi Jie state key laboratory of Solidification processing Northwestern Polytechnical UniversityXi’an 710072China College of Materials Science and Engineering Fuzhou UniversityFuzhou 350108China College of Chemistry and Environmental Science Qujing Normal UniversityQujing 655011China

Microstructure,texture,and mechanical properties of the extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy were investigated at different extrusion temperatures(260 and 320℃),extrusion ratios(10:1,15:1,and 30:1),and extrusion speeds(3 and 6 mm/s).The experimental results exhibited that the grain sizes after extrusion were much finer than that of the homogenized alloy,and the second phase showed streamline distribution along the extrusion direction(ED).With extrusion temperature increased from 260 to 320℃,the microstructure,texture,and mechanical properties of alloys changed *** dynamic recrystallization(DRX)degree and grain sizes enhanced as the extrusion ratio increased from 10:1 to 30:1,and the strength gradually decreased but elongation(EL)*** the extrusion speed increased from 3 to 6 mm/s,the grain sizes and DRX degree increased significantly,and the samples presented the typical-rare-earth(RE)*** alloy extruded at 260℃ with extrusion ratio of 10:1 and extrusion speed of 3 mm/s showed the tensile yield strength(TYS)of 213 MPa and EL of 30.6%.After quantitatively analyzing the contribution of strengthening mechanisms,it was found that the grain boundary strengthening and dislocation strengthening played major roles among strengthening *** results provide some guidelines for enlarging the industrial application of extruded Mg-RE alloy.

关键词： Mg-rare earth alloys extrusion temperature extrusion ratio extrusion speed strengthening mechanisms

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A self-adaptive inorganic in-situ separator by particle crosslinking for nonflammable lithium-ion batteries

引用

Journal of Energy Chemistry 2025年第1期100卷 469-480页

作者： Jiarui Yang Jiuzhou Liu Wenrui Cai Ziyu Zhao Shan Wang Lu He Shanshan Lv Zhiwei Zhu Zhongfeng Ji Guojiang Wen Hua Li Yuanming Zhai Xuewei Fu Wei Yang Yu Wang College of Polymer Science and Engineering State Key Laboratory of Polymer Materials Engineering Sichuan University

All-safe liquid-state lithium-ion batteries(ASLS-LIBs) is of great interest as they can potentially combine the safety of all-solid-state batteries with the high performance and low manufacturing cost of traditional liquid-state LIBs. However, the practical success of ASLS-LIBs is bottlenecked by the lack of advanced separator technology that can simultaneously realize high performances in puncturing-tolerability,fire-resistance, and importantly, wetting-capability with non-flammable liquid-electrolytes. Here, we propose a concept of inorganic in-situ separator(IISS) by hybrid-sol physical crosslinking directly onto the electrode surface to address the above challenges. Particularly, the hybrid-sol is designed with silica nanoparticles as the building block and poly(vinylidene difluoride) nanoparticles as the crosslinking agent. The critical factors for controlling the IISS microstructures and properties have been systematically investigated. The advantages of the IISS have been confirmed by its fast wetting with various fireresistant liquid-electrolytes, customizable thickness and porous structures, robust interface with planar or three-dimensional(3D)-structured electrodes, and importantly, unexpected self-adaptability against puncturing. Enabled by the above merits, a fire-resistant ASLS-LIB is successfully assembled and demonstrated with stable electrochemical performance. This sol-crosslinked IISS may open an avenue for the studies on the next-generation separator technology, cell assembling, solid electrolyte processing as well as non-flammable secondary batteries.

关键词： Silica nanoparticles

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：