检索结果-南通市图书馆

Journal of Zhejiang University-Science A(Applied Physics & Engineering) 2024年第2期25卷 161-182页

作者： Shen LIU Xieping HUANG Xiangzhen KONG Qin FANG Center for Hypergravity Experiment and Interdisciplinary Research Zhejiang UniversityHangzhou310058China Institute of Geotechnical Engineering Zhejiang UniversityHangzhou310058China state key laboratory of disaster prevention&mitigation of explosion&impact Army Engineering University of PLANanjing210007China

This paper presents a numerical study to improve the understanding of the complex subject of penetration and perforation of concrete targets impacted by low-velocity projectiles.The main focus is on the damage mechanisms and the major factors that account for the target resistance of the concrete.An improved continuous surface cap model recently proposed was employed.The model was first equipped with element erosion criteria and was adequately validated by comparisons with ballistic experiments.Comprehensive numerical simulations were carried out where the individual influence of tensile,shear,and volumetric behaviors(pore collapse)of a concrete target on its ballistic performance was investigated.Results demonstrated that cratering on the front face and scabbing on the rear face of the concrete target were mainly dominated by its tensile behavior.The major target resistance came from the second tunneling stage which was primarily governed by the shear and volumetric behaviors of the concrete.Particularly,this study captured the pore collapse-induced damage phenomenon during the high-pressure tunneling stage,which has been extensively reported in experiments but has usually been neglected in previous numerical investigations.

关键词： Penetration Perforation Damage mechanism Target resistance Projectile impact Pore collapse

Experimental investigation of engineered geopolymer composite for structural strengthening against blast loads

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第2期32卷 496-509页

作者： Shan Liu Chunyuan Liu Yifei Hao Yi Zhang Li Chen Zhan Li key laboratory of Coast Civil Structure Safety of Ministry of Education Tianjin UniversityTianjin 300072China Tianjin key laboratory of Prefabricated Buildings and Intelligent Construction Hebei University of TechnologyTianjin 300400China Institute of Defense Engineering AMSPLABeijing 100850China Engineering Research Center of Safety and Protection of explosion&impact of Ministry of Education Southeast UniversityNanjing 211189JiangsuChina state key laboratory of disaster prevention&mitigation of explosion&impact Army Engineering University of the PLANanjing 210007JiangsuChina

The recent increase in blast/bombing incidents all over the world has pushed the development of effective strengthening approaches to enhance the blast resistance of existing civil infrastructures.Engineered geopolymer composite(EGC)is a promising material featured by eco-friendly,fast-setting and strain-hardening characteristics for emergent strengthening and construction.However,the fiber optimization for preparing EGC and its protective effect on structural elements under blast scenarios are uncertain.In this study,laboratory tests were firstly conducted to evaluate the effects of fiber types on the properties of EGC in terms of workability,dry shrinkage,and mechanical properties in compression,tension and flexure.The experimental results showed that EGC containing PE fiber exhibited suitable workability,acceptable dry shrinkage and superior mechanical properties compared with other types of fibers.After that,a series of field tests were carried out to evaluate the effectiveness of EGC retrofitting layer on the enhancement of blast performance of typical elements.The tests include autoclaved aerated concrete(AAC)masonry walls subjected to vented gas explosion,reinforced AAC panels subjected to TNT explosion and plain concrete slabs subjected to contact explosion.It was found that EGC could effectively enhance the blast resistance of structural elements in different scenarios.For AAC masonry walls and panels,with the existence of EGC,the integrity of specimens could be maintained,and their deflections and damage were significantly reduced.For plain concrete slabs,the EGC overlay could reduce the diameter and depth of the crater and spallation of specimens.

关键词： Engineered geopolymer composites Fiber optimization Strengthening material Blast resistance Masonry wall Reinforced AAC panel Plain concrete slab

Layered metastructure containing freely-designed local resonators for wave attenuation

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第2期32卷 23-31页

作者： Yu Li Huguang He Jiang Feng Hailong Chen Fengnian Jin Hualin Fan state key laboratory for disaster prevention&mitigation of explosion&impact Army Engineering University of PLANanjing 210007China Rocket Force University of Engineering Xi'an 710025China Henan International Joint laboratory of Dynamics of impact and disaster of Engineering Structures Department of Civil EngineeringNanyang Institute of TechnologyNanyang 473004China Guangxi key laboratory of disaster prevention and Engineering Safety and Key Laboratory of Disaster Prevention and Structural Safety of Ministry of EducationCollege of Civil Engineering and ArchitectureGuangxi UniversityNanning 530004China Research Center of Lightweight Structures and Intelligent Manufacturing State Key Laboratory of Mechanics and Control of Mechanical StructuresNanjing University of Aeronautics and AstronauticsNanjing 210016China

Combining periodic layered structure with three-dimensional cylindrical local resonators,a hybrid metastructure with improved wave isolation ability was designed and investigated through theoretical and numerical approaches.The metastructure is composed of periodic rubber layers and concrete layers embedded with three-dimensional resonators,which can be freely designed with multi local resonant frequencies to attenuate vibrations at required frequencies and widen the attenuation bandgap.The metastructure can also effectively attenuate seismic responses.Compared with layered rubber-based structures,the metastructure has more excellent wave attenuation effects with greater attenuation and wider bandgap.

关键词： Layered metastructure Local resonator Wave attenuation

Ballistic performance of spaced multi-ply soft fabrics: Experimental and numerical investigation

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第4期34卷 143-155页

作者： Zhongwei Zhang Xiaoning Yang Yuan Lin Ziming Xiong Yuhang Xiang Yi Zhou Mingyang Wang state key laboratory of explosion&impact and disaster prevention&mitigation Army Engineering University of PLANanjing 210007China School of Mechanical Engineering Nanjing University of Science&TechnologyNanjing 210007China state key laboratory of New Textile Materials and Advanced Processing Technologies Wuhan Textile UniversityWuhan 430200China Postdoctoral Station of Civil Engineering Army Engineering University of PLANanjing 210007China

It has been reported that the ply gap influences the ballistic resistance of spaced multi-ply fabric systems,but its working mechanism was not well-understood. This paper reports the experimental and numerical approaches and results of an investigation on the mechanisms that enable the improved ballistic performance of spaced multi-ply systems. Penetration tests were performed over a range of impact velocities ranging from 200 m/s to 400 m/s. The results confirmed that the ply gap is beneficial to the energy absorption capability of the systems. This is because the front plies tend to absorb more energy when they are not immediately constrained by the rear plies. During a ballistic event, the gap relieves the reflection of the compressive pulse, prolonging the projectile engagement time with the front plies;on the other hand, the rear plies become increasingly less active in dissipating energy as the gap increases.When the gap is sufficiently widened to avoid any interference between the plies before the failure of the front ply, the responses of the whole system no longer vary. It was also found that the ballistic performance of the spaced systems is influenced by ply thickness, impact velocity, and the stacking order of the ply gap.

关键词： Energy absorption capability Ply gap Ballistic performance The front ply The rear ply

维普期刊数据库博看期刊

explosion resistance performance of reinforced concrete box girder coated with polyurea:Model test and numerical simulation

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第3期33卷 1-18页

作者： Guangpan Zhou Rong Wang Mingyang Wang Jianguo Ding Yuye Zhang School of Science Nanjing University of Science and TechnologyNanjing 210094JiangsuChina School of Mechanical Engineering Nanjing University of Science and TechnologyNanjing 210094JiangsuChina state key laboratory of explosion and impact and disaster prevention and mitigation Army Engineering University of PLANanjing 210007JiangsuChina

To study the anti-explosion protection effect of polyurea coating on reinforced concrete box girder,two segmental girder specimens were made at a scale of 1:3,numbered as G(without polyurea coating)and PCG(with polyurea coating).The failure characteristics and dynamic responses of the specimens were compared through conducting explosion tests.The reliability of the numerical simulation using LS-DYNA software was verified by the test results.The effects of different scaled distances,reinforcement ratios,concrete strengths,coating thicknesses and ranges of polyurea were studied.The results show that the polyurea coating can effectively enhance the anti-explosion performance of the girder.The top plate of middle chamber in specimen G forms an elliptical penetrating hole,while that in specimen PCG only shows a very slight local dent.The peak vertical displacement and residual displacement of PCG decrease by 74.8% and 73.7%,respectively,compared with those of specimen G.For the TNT explosion with small equivalent,the polyurea coating has a more significant protective effect on reducing the size of fracture.With the increase of TNT equivalent,the protective effect of polyurea on reducing girder displacement becomes more significant.The optimal reinforcement ratio,concrete strength,thickness and range of polyurea coating were also drawn.

关键词： Explosive load explosion resistance performance Model test Polyurea Concrete box girder Numerical simulation

Simplified quantitative analysis method and its application in the insitu synthesized copper-based azide chips

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第2期32卷 309-316页

作者： Jie Ren Yunfeng Li Mingyu Li Xingyu Wu Jiabao Wang Qingxuan Zeng state key laboratory of explosion and Technology Beijing Institute of TechnologyBeijing 100081China

Copper-based azide(Cu(N_(3))2 or CuN_(3),CA)chips synthesized by in-situ azide reaction and utilized in miniaturized explosive systems has become a hot research topic in recent years.However,the advantages of in-situ synthesis method,including small size and low dosage,bring about difficulties in quantitative analysis and differences in ignition capabilities of CA chips.The aim of present work is to develop a simplified quantitative analysis method for accurate and safe analysis of components in CA chips to evaluate and investigate the corresponding ignition ability.In this work,Cu(N_(3))2 and CuN_(3)components in CA chips were separated through dissolution and distillation by utilizing the difference in solubility and corresponding content was obtained by measuring N_(3)-concentration through spectrophotometry.The spectrophotometry method was optimized by studying influencing factors and the recovery rate of different separation methods was studied,ensuring the accuracy and reproducibility of test results.The optimized method is linear in range from 1.0-25.0 mg/L,with a correlation coefficient R^(2)=0.9998,which meets the requirements of CA chips with a milligram-level content test.Compared with the existing ICP method,component analysis results of CA chips obtained by spectrophotometry are closer to real component content in samples and have satisfactory accuracy.Moreover,as its application in miniaturized explosive systems,the ignition ability of CA chips with different component contents for direct ink writing CL-20 and the corresponding mechanism was studied.This study provided a basis and idea for the design and performance evaluation of CA chips in miniaturized explosive systems.

关键词： Copper-based azide chips Spectrophotometry Separation method Quantitative analysis Ignition ability

Reactive molecular dynamics insight into the thermal decomposition mechanism of 2,6-Bis(picrylamino)-3,5-dinitropyridine

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第3期33卷 134-146页

作者： Jianbo Fu Hui Ren Xinzhou Wu Yongjin Chen Mi Zhang Yazhi Cheng state key laboratory of explosion Science and Technology Beijing Institute of TechnologyBeijing 100081China

2,6-bis(picrylamino)-3,5-dinitropyridine(PYX)has excellent thermostability,which makes its thermal decomposition mechanism receive much attention.In this paper,the mechanism of PYX thermal decomposition was investigated thoroughly by the ReaxFF-lg force field combined with DFT-B3LYP(6-311++G)method.The detailed decomposition mechanism,small-molecule product evolution,and cluster evolution of PYX were mainly analyzed.In the initial stage of decomposition,the intramolecular hydrogen transfer reaction and the formation of dimerized clusters are earlier than the denitration reaction.With the progress of the reaction,one side of the bitter amino group is removed from the pyridine ring,and then the pyridine ring is cleaved.The final products produced in the thermal decomposition process are CO_(2),H_(2)O,N_(2),and H_(2).Among them,H_(2)O has the earliest generation time,and the reaction rate constant(k_(3))is the largest.Many clusters are formed during the decomposition of PYX,and the formation,aggregation,and decomposition of these clusters are strongly affected by temperature.At low temperatures(2500 K-2750 K),many clusters are formed.At high temperatures(2750 K-3250 K),the clusters aggregate to form larger clusters.At 3500 K,the large clusters decompose and become small.In the late stage of the reaction,H and N in the clusters escaped almost entirely,but more O was trapped in the clusters,which affected the auto-oxidation process of PYX.PYX's initial decomposition activation energy(E_(a))was calculated to be 126.58 kJ/mol.This work contributes to a theoretical understanding of PYX's entire thermal decomposition process.

关键词： PYX Thermal decomposition ReaxFF-lg MD simulations Excellent thermostable explosives

Enhanced structural damage behavior of liquid-filled tank by reactive material projectile impact

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第1期31卷 211-229页

作者： Jianwen Xie Yuanfeng Zheng Zhenyang Liu Chengzhe Liu Aoxin Liu Pengwan Chen Haifu Wang state key laboratory of explosion Science and Technology Beijing Institute of TechnologyBeijing 100081China

A series of ballistic experiments were performed to investigate the damage behavior of high velocity reactive material projectiles(RMPs) impacting liquid-filled tanks,and the corresponding hydrodynamic ram(HRAM) was studied in detail.PTFE/Al/W RMPs with steel-like and aluminum-like densities were prepared by a pressing/sintering process.The projectiles impacted a liquid-filled steel tank with front aluminum panel at approximately 1250 m/s.The corresponding cavity evolution characteristics and HRAM pressure were recorded by high-speed camera and pressure acquisition system,and further compared to those of steel and aluminum projectiles.Significantly different from the conical cavity formed by the inert metal projectile,the cavity formed by the RMP appeared as an ellipsoid with a conical front.The RMPs were demonstrated to enhance the radial growth velocity of cavity,the global HRAM pressure amplitude and the front panel damage,indicating the enhanced HRAM and structural damage behavior.Furthermore,combining the impact-induced fragmentation and deflagration characteristics,the cavity evolution of RMPs under the combined effect of kinetic energy impact and chemical energy release was analyzed.The mechanism of enhanced HRAM pressure induced by the RMPs was further revealed based on the theoretical model of the initial impact wave and the impulse analysis.Finally,the linear correlation between the deformation-thickness ratio and the non-dimensional impulse for the front panel was obtained and analyzed.It was determined that the enhanced near-field impulse induced by the RMPs was the dominant reason for the enhanced structural damage behavior.

关键词： Reactive material projectile Hydrodynamic ram Enhanced structural damage Liquid-filled tank impact

Assessing the energy release characteristics during the middle detonation reaction stage of aluminized explosives

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第3期33卷 270-277页

作者： Kun Yang Lang Chen Danyang Liu Bin Zhang Jianying Lu Junying Wu state key laboratory of explosion Science and Technology Beijing Institute of TechnologyBeijing 100081China

Afterburning behind the detonation front of an aluminized explosive releases energy on the millisecond timescale,which prolong the release of detonation energy and the energy release at different stages also shows significant differences.However,at present,there are few effective methods for evaluating the energy release characteristics of the middle reaction stage of such explosives,which can have a duration of tens to hundreds of microseconds.The present work demonstrates an approach to assessing the midstage of an aluminized explosive detonation based on a water push test employing a high degree of confinement.In this method,the explosive is contained in a steel cylinder having one end closed that is installed at the bottom of a transparent water tank.Upon detonation,the gaseous products expand in one direction while forcing water ahead of them.The resulting underwater shock wave and the interface between the gas phase products and the water are tracked using an ultra-high-speed framing and streak camera.The shock wave velocity in water and the expansion work performed by the gaseous detonation products were calculated to assess the energy release characteristics of aluminized explosives such as CL-20 and RDX in the middle stage of the detonation reaction.During the middle stage of the detonation process of these aluminized explosives,the aluminum reaction reduced the attenuation of shock waves and increased the work performed by gas phase products.A higher aluminum content increased the energy output while the presence of oxidants slowed the energy release rate.This work demonstrates an effective means of evaluating the performance of aluminized explosives.

关键词： Aluminized explosive Non-ideal detonation Water push test Energy release

Propagation Properties of Shock Waves in Polyurethane Foam based on Atomistic Simulations

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第1期31卷 117-129页

作者： Zhiqiang Hu Jianli Shao Shiyu Jia Weidong Song Cheng Wang state key laboratory of explosion Science and Technology Beijing Institute of TechnologyBeijing 100081China

Porous materials are widely used in the field of protection because of their excellent energy absorption characteristics.In this work,a series of polyurethane microscopic models are established and the effect of porosity on the shock waves is studied with classical molecular dynamics simulations.Firstly,shock Hugoniot relations for different porosities are obtained,which compare well with the experimental data.The pores collapse and form local stress wave,which results in the complex multi-wave structure of the shock wave.The microstructure analysis shows that the local stress increases and the local velocity decreases gradually during the process of pore collapse to complete compaction.Finally,it leads to stress relaxation and velocity homogenization.The shock stress peaks can be fitted with two exponential functions,and the amplitude of attenuation coefficient decreases with the increase of density.Besides,the pore collapse under shock or non-shock are discussed by the entropy increase rate of the system.The energy is dissipated mainly through the multiple interactions of the waves under shock.The energy is dissipated mainly by the friction between atoms under non-shock.

关键词： Polyurethane foam Shock wave Attenuation Atomistic simulation