检索结果-南通市图书馆

Electrochemical anodic oxidation assisted fabrication of memristors

在线全文

学校读者我要写书评

暂无评论

International Journal of Extreme Manufacturing 2024年第3期6卷 250-272页

作者： Shuai-Bin Hua Tian Jin Xin Guo School of materials Science and Engineering State Key Laboratory of Material Processing and Die&Mould TechnologyHuazhong University of Science and TechnologyWuhan 430074People’s Republic of China

Owing to the advantages of simple structure,low power consumption and high-density integration,memristors or memristive devices are attracting increasing attention in the fields such as next generation non-volatile memories,neuromorphic computation and data ***,the deposition of memristive films often requires expensive equipment,strict vacuum conditions,high energy consumption,and extended processing *** contrast,electrochemical anodizing can produce metal oxide films quickly(e.g.10 s) under ambient *** means of the anodizing technique,oxide films,oxide nanotubes,nanowires and nanodots can be fabricated to prepare *** film thickness,nanostructures,defect concentrations,etc,can be varied to regulate device performances by adjusting oxidation parameters such as voltage,current and *** memristors fabricated by the anodic oxidation technique can achieve high device consistency,low variation,and ultrahigh yield *** article provides a comprehensive review of the research progress in the field of anodic oxidation assisted fabrication of ***,the principle of anodic oxidation is introduced;then,different types of memristors produced by anodic oxidation and their applications are presented;finally,features and challenges of anodic oxidation for memristor production are elaborated.

关键词： anodic oxidation anodized aluminium oxide memristor resistive switching electrical properties

Self-Healable and Stretchable PAAc/XG/Bi2Se0.3Te2.7 Hybrid Hydrogel Thermoelectric materials

在线全文

学校读者我要写书评

暂无评论

Energy & Environmental materials 2024年第2期7卷 184-190页

作者： Jinmeng Li Tian Xu Zheng Ma Wang Li Yongxin Qian Yang Tao Yinchao Wei Qinghui Jiang Yubo Luo Junyou Yang state key laboratory of materials processing and die & mould technology School of Materials Science and Engineering Huazhong University of Science and Technology

Thermoelectric power generators have attracted increasing interest in recent years owing to their great potential in wearable electronics power *** is noted that thermoelectric power generators are easy to damage in the dynamic service process,resulting in the formation of microcracks and performance ***,we prepare a new hybrid hydrogel thermoelectric material PAAc/XG/Bi2Se0.3Te2.7by an in situ polymerization method,which shows a high stretchable and self-healable performance,as well as a good thermoelectric *** the sample with Bi2Se0.3Te2.7content of 1.5 wt%(i.e.,PAAc/XG/Bi2Se0.3Te2.7（1.5 wt%）),which has a room temperature Seebeck coefficient of-0.45 mV K-1,and exhibits an opencircuit voltage of-17.91 mV and output power of 38.1 nW at a temperature difference of 40 *** being completely cut off,the hybrid thermoelectric hydrogel automatically recovers its electrical characteristics within a response time of 2.0 s,and the healed hydrogel remains more than 99% of its initial power *** stretchable and self-healable hybrid hydrogel thermoelectric materials show promising potential for application in dynamic service conditions,such as wearable electronics.

关键词： bismuth telluride self healing thermoelectric material

Progress in preparation of AlN-reinforced magnesium matrix composites:A review

在线全文

学校读者我要写书评

暂无评论

China Foundry 2024年第1期21卷 1-10页

作者： Lu Chen Shu-lin Lü Di-jia Zhao Wei Guo Jian-yu Li Shu-sen Wu state key lab.of materials processing and die&mould technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan 430074China

As a ceramic material,AlN has very good thermophysical and mechanical *** addition,AlN is an effective refining agent for Mg alloys because it has a lattice constant similar to that of ***,AlN is an ideal reinforcement for magnesium matrix composites(MMCs),and is attracting increasing *** review addresses the development of preparation technologies for AlN-reinforced Mg matrix *** mainstream preparation techniques include stir casting,melt infiltration,powder metallurgy,and in-situ *** addition,the advantages and disadvantages of these techniques are analyzed in depth,and it is pointed out that the next direction for the preparation of high-performance AlN-reinforced MMCs is less aluminization and multiple technologies integration.

关键词： AlN MMCs preparation thermophysical property mechanical property

Fast thermal responsive separators toward long-life and safe lithium metal batteries

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第4期17卷 2746-2754页

作者： Pingan Li Zhifang Liu Yitong Peng Shanshan Yang Tao Meng Yunhuan Hu Yingjun Jiang Hao Sun Qi Li Xianluo Hu state key laboratory of materials processing and die and mould technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan 430074China

Lithium metal batteries(LMBs)have been extensively investigated during the past decades because of their ultrahigh energy *** the increasing demand for energy density,however,the safety issue of LMBs has become a significant *** particular,localized areas of increased temperature(namely,hotspots)may be induced and even exacerbated within LMBs by uneven current distribution,internal short circuits,or inadequate heat dissipation,which significantly sacrifices battery safety and cycle ***,we report the rational design and fabrication of a fast thermal responsive separator capable of inhibiting the growth of lithium dendrites and mitigating thermal propagation,thereby reducing the risk of thermal *** as-achieved separator comprises both an electrospun membrane using a phase change material with superior thermal-storage ability and a thermally conductive modification layer of hexagonal boron nitride nanosheets with a fast heat-transfer *** is demonstrated that such a unique integration of heat conduction and heat storage enables the functional separator with attractive abilities to mitigate hotspots and inhibit the growth of lithium dendrites upon the cycling of ***,pouch cells with the thermal-responsive separator,as well as numerical simulations,verify much enhanced safety and cycle life of *** work may offer a new conceptual design of intelligent separators that acts as a functional unit encapsulated within a single cell to boost in-situ thermal management,which will help to develop high-safety and energy-dense LMBs.

关键词： lithium metal batteries separators hotspots safety thermal management

Microstructure evolution,mechanical properties and fracture behavior of Al-xSi/AZ91D bimetallic composites prepared by a compound casting

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第5期12卷 1944-1964页

作者： Guangyu Li Wenming Jiang Feng Guan Junwen Zhu Yang Yu Zitian Fan state key laboratory of materials processing and die&mould technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan 430074China

In this paper,the effect of the Si content on microstructure evolution,mechanical properties,and fracture behavior of the Al-xSi/AZ91D bimetallic composites prepared by compound casting was investigated *** obtained results showed that all the Al-xSi/AZ91D bimetallic composites had a metallurgical reaction layer(MRL),whose thickness increased with increasing Si content for the hypoeutectic Al-Si/AZ91D composites,while the hypereutectic Al-Si/AZ91D composites were *** MRL included eutectic layer(E layer),intermetallic compound layer(IMC layer)and transition region layer(T layer).In the IMC layer,the hypereutectic Al-Si/AZ91D composites contained some Si solid solution and flocculent Mg_(2)Si+Al-Mg IMCs phases not presented in the hypoeutectic Al-Si/AZ91D ***,increasing Si content,the thickness proportion of the T layer increased,forming an inconsistent preferred orientation of the *** shear strengths of the Al-xSi/AZ91D bimetallic composites enhanced with increasing Si content,and the Al-15Si/AZ91D composite obtained a maximum shear strength of 58.6 MPa,which was 73.4% higher than the Al-6Si/AZ91D *** fractures of the Al-xSi/AZ91D bimetallic composites transformed from the T layer into the E layer with the increase of the Si *** improvement of the shear strength of the Al-xSi/AZ91D bimetallic composites was attributed to the synergistic action of the Mg_(2)Si particle reinforcement,the reduction of oxidizing inclusions and the ratio of Al-Mg IMCs as well as the orientation change of the MRL.

关键词： Al/Mg bimetallic composites Si content Mg_(2)Si reinforcement Microstructure Mechanical properties Fracture behavior

Dual-salt poly(tetrahydrofuran) electrolyte enables quasi-solid-state lithium metal batteries to operate at -30 ℃

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第9期96卷 456-463页

作者： Zhiyong Li Zhuo Li Rui Yu Xin Guo School of materials Science and Engineering State Key Laboratory of Material Processing and Die&Mould TechnologyHuazhong University of Science and TechnologyWuhan 430074HubeiChina The state key laboratory of Refractories and Metallurgy and Institute of Advanced materials and Nanotechnology Wuhan University of Science and TechnologyWuhan 430081HubeiChina

The stable operation of solid-state lithium metal batteries at low temperatures is plagued by severe restrictions from inferior electrolyte-electrode interface compatibility and increased energy barrier for Li^(+)***,we prepare a dual-salt poly(tetrahydrofuran)-based electrolyte consisting of lithium hexafluorophosphate and lithium difluoro(oxalato)borate(LiDFOB).The Li-salt anions(DFOB−)not only accelerate the ring-opening polymerization of tetrahydrofuran,but also promote the formation of highly ion-conductive and sustainable interphases on Li metal anodes without sacrificing the Li^(+)conductivity of electrolytes,which is favorable for Li^(+)transport kinetics at low *** of this polymer electrolyte in Li||LiFePO_(4)cells show 82.3%capacity retention over 1000 cycles at 30℃and endow stable discharge capacity at−30℃.Remarkably,the Li||LiFePO4 cells retain 52%of their room-temperature capacity at−20℃and 0.1 *** rational design of dual-salt polymer-based electrolytes may provide a new perspective for the stable operation of quasi-solid-state batteries at low temperatures.

关键词： Poly(tetrahydrofuran) Dual-salt electrolyte Solidel ectrolyte interphase Low-temperature operation Quasi-solid-state battery

Accelerated water harvesting from vapor via a bio-inspired hydrogel pattern

在线全文

学校读者我要写书评

暂无评论

National Science Review 2024年第3期11卷 48-49页

作者： Lianbin Zhang Peng Wang state key laboratory of material processing and die&mould technology Key Laboratory of Materials Chemistry for Energy Conversion and Storage of Ministry of Education School of Chemistry and Chemical Engineering Huazhong University of Science and Technology(HUST) School of Environmental Science and Engineering Sun Yat-sen University

Water and energy sustainability are integral parts of resource sustainability of the world. Due to water molecules' superior capability of serving as both hydrogenbond donor and acceptor, phase change of water, especially between liquid and vapor, underpins global water cycles,facilitates energy transformation and transfer, and thus helps shape the unique local weather and global climate patterns.

关键词：

Arc additive manufacturing of gradient hot forging die with shaped waterways

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

China Welding 2024年第1期33卷 27-39页

作者：余圣甫林海涛邱源 state key laboratory of materials processing and die&mould technology Huazhong University of Science and TechnologyWuhan 430074China

Under the working environment of high temperature and strong load impact,hot forging die is prone to failure which reduces the service life of *** arc additive manufacturing in the die cavity,a gradient material hot forging die with high precision,superior per-formance,and conformal cooling channels is *** improves the toughness of the die cavity and reduces the working temperature,thereby forming an isothermal field,which is an effective method to enhance the lifespan of the hot forging *** kinds of gradient flux-cored wires are designed for the surface of 5CrNiMo steel,and the microstructure and mechanical properties between gradient interfaces were *** on the spatial curved structure of shaped waterways in the hot forging die cavity,a study was conducted on the strategy of partitioned forming for the manufacturing of the die with shaped *** order to avoid interference with the arc gun,the hot for-ging die is divided into four regions,namely the transition region,upper,middle,and lower region,based on a combination of cavity depth and internal U-shaped and quadrilateral *** results show that the developed flux-cored wires have good moldability with straight sides of deposited metal under different process parameters and flat surface without cracks,pores and other *** the same working conditions,the life of hot forging die formed by the gradient materials is more than multiple times that of the single material hot forging die,and the temperature gradient field of the shaped waterway die is 7℃/cm smaller than that of traditional straight waterway.

关键词： gradient materials shaped waterways arc additive manufacturing mechanical property

Holographic Polymer Nanocomposites with High Refractive Index Modulation by Doping Liquid Crystal E6M

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第7期42卷 926-935,I0006页

作者： Meng-Yun Wang Yue Zhang Dan Wang Ming Yao Yi-Xuan Wang Xing-Ping Zhou Hai-Yan Peng Xiao-Lin Xie key laboratory of material Chemistry for Energy Conversion and Storage Ministry of EducationSchool of Chemistry and Chemical EngineeringHuazhong University of Science and TechnologyWuhan430074China state key laboratory of materials processing and die&mould technology Huazhong University of Science and TechnologyWuhan430074China National Anti-counterfeit Engineering Research Center Huazhong University of Science and TechnologyWuhan430074China

Holographic optical elements(HOEs)based on polymer composites have become a research hot spot in recent years for augmented reality(AR)due to the significant improvement of optical performance,dynamic range,ease of processing and high yield ***,it remains a formidable challenge to obtain a large field of view(FOV)and brightness due to the limited refractive index ***,we report an effective method to tackle the challenge by doping an epoxy liquid crystal termed E6M,which enables a large refractive index modulation of 0.050@633 nm and low haze of 5.0%at a doping concentration of 5 wt%.This achievement may be ascribed to the improved molecular ordering of liquid crystals within the holographic polymer *** high refractive index modulation can endow transmission-type holographic polymer composites with a high diffraction efficiency of 96.2%at a small thickness of 5μm,which would promise the design of thin and lightweight AR devices.

关键词： Polymer nanocomposites Holography AR/VR Refractive index modulation Liquid crystal