检索结果-南通市图书馆

Simultaneously enhancing the strength and ductility of as-extruded AlN/AZ91 composites via nano-precipitation and pyramidal slip

引用

Journal of Materials Science & technology 2024年第5期172卷 240-254页

作者： Bin Zhang Yunxia Sun Tuo Liang Yunzhen Li Tian Li Jingchao Wang Ruiru Cai Changlin Yang State Key Laboratory of solidification Processing Northwestern Polytechnical UniversityXi’an 710072China

Age hardening is often used to optimize the mechanical properties of as-deformed Mg-based materials in industry,whereas the improvement of strength is usually accompanied by the significant loss of ductility,which hinders the application of Mg-based materials in structural *** the present work,high strength-ductility synergy(the yield strength of 263±9 MPa,ultimate tensile strength of 398±7 MPa and elongation to fracture of 34%±1%)was realized in as-extruded AlN/AZ91 composites after optimiz-ing aging *** characterization shows that AlN particles induced a large number of geometrically necessary dislocations around the AlN/Mg interface during extrusion,which decreased the nucleation barrier and provided more heterogeneous nucleation sites forγ-Mg 17 Al 12 continuous ***,95%of residual dislocations in as-extruded AlN/AZ91 composites were annihilated dur-ing peak-aging,suppressing the growth and coarsening of continuous ***,high density of nano-sizedγ-Mg 17 Al 12 continuous precipitates was produced in as-extruded AlN/AZ91 composites af-ter *** tension,gliding dislocations bypassed sphericalγ-Mg 17 Al 12 nano-precipitates by Orowan looping rather than cutting mechanism,which induced a strong block on dislocation *** high yield strength was mainly attributed to the high density of non-shearableγ-Mg 17 Al 12 nano-precipitates with spherical morphology,which was different from other Mg-Al-based *** results of texture evolution and slip trace analysis demonstrated that the suppression of extension twinning and less basal slip was due to the enhanced activity of pyramidalc+aslip in as-extruded AlN/AZ91 com-posites after peak-aging during the room temperature tension,meanwhile,the dislocation density of as-extruded AlN/AZ91 composites was significantly decreased during peak-aging,then higher elongation to fracture was achieved.

关键词： Magnesium matrix composites Mechanical properties Precipitation Deformation mechanisms Non-basal slip

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Evolution of molecular structure of TATB under shock loading from transient Raman spectroscopic technique

引用

Defence technology（防务技术） 2024年第3期33卷 613-620页

作者： Hongliang Kang Xue Yang Wenshuo Yuan Lei Yang Xinghan Li Fusheng Liu Zhengtang Liu Qijun Liu Bond and Band Engineering Group School of Physical Science and TechnologySouthwest Jiaotong UniversityChengdu 610031China State Key Laboratory of solidification Processing Northwestern Polytechnical UniversityXi'an 710072China

By combination of the transient Raman spectroscopic measurement and the density functional theoretical calculations,the structural evolution and stability of TATB under shock compression was *** to the improvement in synchronization control between two-stage light gas gun and the transient Raman spectra acquisition,as well as the sample preparation,the Raman peak of the N-O mode of TATB was firstly observed under shock pressure up to 13.6 GPa,noticeably higher than the upper limit of 8.5 GPa reported in available *** taking into account of the continuous shift of the main peak and other observed Raman peaks,we did not distinguish any structural transition or any new ***,both the present Raman spectra and the time-resolved radiation of TATB during shock loading showed that TATB exhibits higher chemical stability than previous *** reveal the detailed structural response and evolution of TATB under compression,the density functional theoretical calculations were conducted,and it was found that the pressure make N-O bond lengths shorter,nitro bond angles larger,and intermolecular and intra-molecular hydrogen bond interactions *** observed red shift of Raman peak was ascribed to the abnormal enhancement of H-bound effect on the scissor vibration mode of the nitro group.

关键词： TATB Raman spectra Structural evolution Shock loading

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Forming process chain for manufacturing complex conical-section profiled rings:On a co-design method

引用

Chinese Journal of Aeronautics 2024年第6期37卷 485-503页

作者： Lei LIANG Chaojiang ZOU Lianggang GUO State Key Laboratory of solidification Processing School of Materials Science and EngineeringNorthwestern Polytechnical UniversityXi’an 710072China Guizhou Aviation technology Development Co.Ltd Guiyang 550081China

The final quality of complex conical-section rings depends on co-design of multiple processes in forming process *** this study,for a complex aeroengine casing ring with a large slope and a flange on its end,a co-design method of the forming process chain is put forward towards the objective of precision forming,which not only proposes a standard process route composed of multiple processes of upsetting,punching,rectangular ring rolling,loose tooling forging and profiled ring rolling,but also presents co-design methods of dies and blanks for all the *** profiled ring rolling,a design method of preformed blank that makes the blank and the target conical-section ring have the same axial volume distribution is *** the method,the axial metal redistribution during the process can be alleviated greatly thus improving the forming stability and precision of the *** on the geometric features of designed preformed blank,design methods of blanks and dies for loose tolling forging,rectangular ring rolling,punching and upsetting are proposed *** view of the key roles of loose tooling forging(manufacturing the preformed blank)and profiled ring rolling on the final quality of the conical ring parts,inherited FE simulations for these two processes are performed to verify the proposed design methods and determine appropriate design *** is demonstrated that the proposed design method has significant advantages in improving forming ***,a suggestive value 1.5 of the rolling ratio for profiled ring rolling(a key design parameter)is given based on comprehensive consideration of multiple indicators such as ring roundness,deformation uniformity and forming *** corresponding industrial experiments performed illustrate that a high forming precision of the conical-section aeroengine casing ring is achieved.

关键词： Complex conical-section ring Co-design of forming process chain Profiled ringrolling Preformed blank Loose tooling forging

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Role of inclination angle on columnar-to-equiaxed transition in the eutectic Al-5Mg-2Si alloy fabricated by laser powder bed fusion

引用

Journal of Central South University 2024年第7期31卷 2150-2166页

作者： YANG Fei-peng WEN Tao ZHANG Lei WANG Jian-ying HUANG Shi-long JI Shou-xun YANG Hai-lin State Key Laboratory of Powder Metallurgy Central South UniversityChangsha 410083China Brunel Centre for Advanced solidification technology(BCAST) Brunel University LondonUxbridgeMiddlesexUB83PHUnited Kingdom

In this study,the effect of inclination angles relative to the building direction in the additively manufactured eutectic Al-5Mg-2Si alloy was investigated through the laser powder bed fusion(LPBF).The microstructures and mechanical properties of the Al-5Mg-2Si alloy manufactured with different inclination angles(0°,30°,45°,60°and 90°)were reported and *** is found that the“semicircular”melt pool(MP)in the load bearing face of 0°sample was eventually transformed into“stripe-like”MP in the 90°sample,accompanied by an increased fraction of melt pool boundaries(MPBs).Moreover,the microstructural analysis revealed that the columnar-to-equiaxed transition(CET)of theα-Al grains and eutectic Mg2Si was completed in the 90°sample,which were significantly refined with the average size of 10.6μm and 0.44μm,*** is also found that the 90°sample exhibited good combination of strength and elongation(*** strength of 393 MPa,ultimate tensile strength of 483 MPa and elongation of 8.1%).The anisotropic mechanical properties were highly associated with the refined microstructures,thermal stress,and density of ***,the CET driven by inclination angles was attributed to the variation of thermal conditions inside the local MPs.

关键词： additive manufacturing aluminium alloys columnar-to-equiaxed transition anisotropy mechanical property

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Microstructure and mechanical properties of Co-28Cr-6Mo-0.22C investment castings by current solution treatment

引用

China Foundry 2024年第4期21卷 369-378页

作者： Ze-yu Dan Jun Liu Jian-lei Zhang Yan-hua Li Yuan-xin Deng Yun-hu Zhang Chang-jiang Song Center for Advanced solidification technology School of Materials Science and EngineeringShanghai UniversityShanghai 200444China Wuxi CastPro Precision Co. Ltd.Wuxi 214105JiangsuChina

This study examined the impact of current solution treatment on the microstructure and mechanical properties of the Co-28Cr-6Mo-0.22C alloy investment *** findings reveal that the current solution treatment significantly promotes the dissolution of carbides at a lower *** optimal conditions for solution treatment are determined as a solution temperature of 1,125°C and a holding time of 5.0 *** these parameters,the size and volume fraction of precipitated phases in the investment castings are measured as6.2μm and 1.1vol.%.The yield strength,ultimate tensile strength,and total elongation of the Co-28Cr-6Mo-0.22C investment castings are 535 MPa,760 MPa,and 12.6%,*** values exceed those obtained with the conventional solution treatment at 1,200°C for 4.0 *** findings suggest a phase transformation of M_(23)C_(6)→σ+C following the current solution treatment at 1,125°C for 5.0 *** comparison,the traditional solution treatment at 1,200°C for 4.0 h leads to the formation of M_(23)C_(6)and M_(6)C *** is noteworthy that the non-thermal effect of the current during the solution treatment modifies the free energy of both the matrix and precipitation *** modification lowers the phase transition temperature of the M_(23)C_(6)→σ+C reaction,thereby facilitating the dissolution of *** a result,the current solution treatment approach achieves carbide dissolution at a lower temperature and within a significantly shorter time when compared to the traditional solution treatment methods.

关键词： CoCrMo alloy investment castings current solution treatment microstructure mechanical property carbide

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

EBSD analysis of grain boundary evolution and dynamic recrystallization of Inconel 625 superalloy at various hot spinning feed rates

引用

Progress in Natural Science:Materials International 2024年第1期34卷 56-65页

作者： Zhanjie Jing Jiangkun Fan Xudong Liu Yuelin Song Zixiao Wang Kai Cao Yuetan Chen Heng Fu Jianing Zhang Jinshan Li State Key Laboratory of solidification Processing Northwestern Polytechnical University Chongqing Innovation Center Northwestern Polytechnical University National&Local Joint Engineering Research Center for Precision Thermoforming technology of Advanced Metal Materials

Hot spinning can make the material withstand shear stress, so that the shape of the material has a great change,which is one of the main processing methods of nickel-based alloy plate members. Inconel 625 alloy, which has excellent high temperature mechanical properties and can be used as the main candidate material for aerospace applications, needs further study on its hot spinning deformation behavior and deformation mechanism. In this paper, the effect of feed rate on the microstructure evolution of Inconel 625 superalloy was studied by the electron backscattered diffraction technology. The microstructure with necklace-like structures composed of dynamic recrystallization(DRX) grains was observed after hot spinning. It was found that at the low feed rate, the promotion of DRX degree and grain refinement happened, where the grain size reached the trough of 10.99 μm under a feed rate of 300 mm/min. However, with the further feed rate rising, the degree of DRX was suppressed to a certain extent and grain size increased to 14.26 μm. On balance, the feed rate of 300 mm/min was the most efficient condition for grain refinement. Besides, it was revealed that both discontinuous dynamic recrystallization(DDRX) and continuous dynamic recrystallization(CDRX) occurred during hot spinning. DDRX includes the initial grain boundary nucleation by bulging and the annealing twin boundary assisted nucleation, while the CDRX mechanism is related to the continuous subgrain rotation within the deformed grain. DDRX is the main DRX mechanism.

关键词： Inconel 625 superalloy Hot spinning Grain boundary evolution DRX mechanism

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Microstructure evolution and shape memory behaviors of Ni_(47)Ti_(44)Nb_(9)alloy subjected to multistep thermomechanical loading with different prestrain levels

引用

Journal of Materials Science & technology 2024年第4期171卷 80-93页

作者： Y.H.Zhang H.Li Z.W.Yang X.Liu Q.F.Gu State Key Laboratory of solidification Processing School of Materials Science and EngineeringNorthwestern Polytechnical UniversityXi’an 710072China Shaanxi Key Laboratory of High-Performance Precision Forming technology and Equipment Northwestern Polytechnical UniversityXi’an 710072China

Ni_(47)Ti_(44)Nb_(9)shape memory alloy(SMA)is a promising material in the aerospace field due to its wide transformation *** application of shape memory effect depends on multistep thermomechan-ical loading,viz.,low-temperature deformation and subsequent heating to ***-temperature deformation prestrain plays a pivotal role in shape memory properties tailoring of SMA ***,microstructure evolution and deformation mechanisms of Ni_(47)Ti_(44)Nb_(9)SMA subjected to vari-ous prestrain levels are still *** this end,microstructure evolution and shape memory behaviors of Ni_(47)Ti_(44)Nb_(9)alloy subjected to multistep thermomechanical loading with prestrain levels of 8%-16%at-28℃(M_(s)+30℃)were *** results demonstrate that the stress-strain curve of the specimen exhibits four distinct stages at a maximal prestrain of 16%.Whereas stageⅡand stageⅢend at prestrains of∼8%and∼12%,*** stageⅡ,the stress-induced martensitic transformation is accompanied by the dislocation slip of the NiTi matrix andβ-Nb *** stageⅢ,in addition to the higher density of dislocations and further growth of stress-induced martensite variants(SIMVs),(001)compound twins are introduced as a result of the(001)deformation twinning in stress-induced ***{20-1}martensite twins are gradually introduced in stageⅣ.Correspondingly,after subsequent unloading and heating,a higher density of{114}austenite twins form in the specimen with a larger prestrain of 16%.With increasing prestrain from 8%to 16%,the recoverable strainε_(re)^(T)upon heating increases first and then ***ε_(re)^(T)obtains a maximum of 7.03%at 10%prestrain and de-creases to 6.17%at 16%*** increase ofε_(re)^(T)can be attributed to the formation of new SIMVs,the further growth of existing SIMVs,and the recoverable(001)compound *** the decrease ofε_(re)^(T)is mainly associated with the irrecoverable strain by{20−1}martensite *** effe

关键词： Ni_(47)Ti_(44)Nb_(9)shape memory alloy Wide transformation hysteresis Thermomechanical loading Microstructure evolution Shape memory behaviors Stress-induced martensitic transformation Deformation twinning

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Top priority current path between SiC particles during ultra-high temperature flash sintering: Presence of PyC “bridges”

引用

Journal of Advanced Ceramics 2024年第2期13卷 255-262页

作者： Le Lu Tianlong Liu Zhaofeng Chen Fei Wang Mengmeng Yang Qiong Wu Lixia Yang Huanyong Li International Laboratory for Insulation and Energy Efficiency Materials College of Materials Science and TechnologyNanjing University of Aeronautics and AstronauticsNanjing 211106China State Key Laboratory of solidification Processing School of Materials and EngineeringNorthwestern Polytechnical UniversityXi’an 710072China

Flash sintering(FS)is a novel technique for rapidly densifying silicon carbide(SiC)*** work achieved a rapid sintering of SiC ceramics by the utilization of ultra-high temperature flash sintering within 60 *** carbon(PyC)“bridges”were constructed between SiC particles through the carbonisation of phenolic resin,providing a large number of current *** incubation time of the flash sintering process was significantly reduced,and the sintering difference between the centre and the edge regions of the ceramics was minimized,with an average particle size of the centre region and edge region being 12.31 and 9.02μm,*** results showed that the porosity of the SiC ceramics after the flash sintering was reduced to 14.79% with PyC“bridges”introduced,and the Vickers hardness reached 19.62 ***“bridges”gradually evolved from amorphous eddy current carbon to oriented graphite carbon,indicating that the ultra-high temperature environment in which the sample was located during the flash sintering was successfully ***-high temperature flash sintering of SiC is expected to be applied to the local repair of matrix damage in SiC ceramic matrix composites.

关键词： silicon carbide(SiC) flash sintering(FS) pyrolytic carbon(PyC)"bridges" current path instantaneous

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Microstructure and texture evolution of Cu–Cr–Co–Ti alloys during the two-stage cryorolling

引用

Rare Metals 2024年第9期43卷 4535-4547页

作者： Jia-Jun Zhang Long-Jian Li Zhi-Feng Liu Zong-Ning Chen En-Yu Guo Hui-Jun Kang Ren-Geng Li Tong-Min Wang Key Laboratory of solidification Control and Digital Preparation technology (Liaoning Province) School of Materials Science and EngineeringDalian University of Technology Center of Hyper-Gravity Experimental and Interdisciplinary Research Zhejiang University Ningbo Institute of Dalian University of technology！Ningbo315000 China Key Laboratory for Light-Weight Materials Nanjing Tech University

This study entailed an investigation of the mechanical properties, microstructural and texture orientation evolutions of CuDCrDCoDTi alloys prepared via twostage cryorolling and intermediate aging treatment. To this end, X-ray diffraction and electron backscatter diffraction were employed. The results indicate that the two-stage cryorolling and intermediate aging treatments led to the development of profuse twin bundles and significantly enhanced the mechanical properties. The initial cryorolling led to coplanar slip and developed a strong Y({111} ) orientation, accelerating the formation of Goss({011} ) orientation and a Brass-type *** intermediate aging treatment relieved the restriction on dislocation slip and reoriented the grains toward the Copper({112} ) and Z({111} ) *** Z orientation, with a relatively high volume fraction,dominated the macrotexture. Secondary cryorolling intensified twinning and shear banding, transforming the Copper-type shear bands into Brass-type shear bands with rhomboidal prism morphology. The areas inside the Brasstype shear bands exhibited a Y orientation, and the areas outside the shear bands exhibited a stable Brass-type texture. The evident decrease in the weighted Schmid factors demonstrated that the two-stage cryorolling and intermediate aging treatment can modify the texture evolution and aid the design of high-performance Cu alloys.

关键词： Copper alloys Electron backscatter diffraction Macrotexture evolution Schmid factor Two-stage cryorolling

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

High-areal-capacity/power lithium metal microbattery configuration based on the mechanically flexible,ultra-lightweight,nanocellulose framework

引用

Nano Research 2024年第9期17卷 8155-8162页

作者： Shaowen Li Ting Zhao Helin Wang Zhiqiao Wang Min Zhang Ahu Shao Jiacheng Liu Zhaohui Wang Yue Ma State Key Laboratory of solidification Processing Centre for Nano Energy MaterialsSchool of Materials Science and EngineeringNorthwestern Polytechnical UniversityXi'an 710072China College of Materials Science and Engineering Hunan UniversityChangsha 410082China The Faculty of Printing Packaging Engineering and Digital Media TechnologyXi'an University of TechnologyXi'an 710048China

The ubiquitous implementation of integrated microelectronics requires the on-chip power sources featured with the lightweight configuration design,high areal-capacity-loadings as well as facile reaction kinetics that beyond the current available microbattery ***,this study constructs a mechanically flexible,nanocellulose fiber(NCF)reinforced microbattery configuration,which consists of metal-organic frameworks(ZIF-8)modified NCF as the separator(MOF@NCF),the carbonized MOF@NCF as the metallic deposition substrate(c-MOF@NCF)as well as gradient-structured LiFePO4 particles infiltrated in the NCF matrix(LFP@NCF)as the *** film-stacked,integrated NCF-based microbattery prototype not only achieves the facile reaction kinetics with homogenized,dendrite-free Li metal deposition at high-capacity-loadings(2 mAh·cm^(-2)),but also eliminates the necessary use of metallic current collector to maximize the electroactive mass ratio,which therefore enables the high energy density of 6.8 mWh·cm^(-2)at the power output of 1.36 mW·cm^(-2)as well as the robust cyclability upon various geometric flexing *** study presents a quantum leap towards the facile reaction kinetics and multi-scale interfacial stability for the flexible microbattery construction that based on the sustainable utilization of bio-scaffolds.

关键词： nanocellulose microbattery mechanical flexible ultra-lightweight high-areal-capacity

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：