检索结果-南通市图书馆

Plugging behaviors of temporary plugging particles in hydraulic fractures

Petroleum Exploration and Development 2023年第2期50卷 464-472页

作者： GUO Jianchun ZHAN Li LU Qianli QI Tianjun LIU Yuxuan WANG Xin CHEN Chi GOU Xinghao State Key Laboratory of oil and gas Reservoir Geology and Exploitation Southwest Petroleum UniversityChengdu 610500China CCDC Downhole Service company Chengdu 610052China PetroChina Research Institute of Petroleum Exploration and Development Beijing 100083China Engineering Technology Research Institute of PetroChina southwest oil&gas Field company Guanghan 618300China

Using the visualized experimental device of temporary plugging in hydraulic fractures, the plugging behaviors of temporary plugging particles with different sizes and concentrations in hydraulic fractures were experimentally analyzed under the conditions of different carrier fluid displacements and viscosities. The results show that the greater the carrier fluid viscosity and displacement, the more difficult it is to form a plugging layer, and that the larger the size and concentration of the temporary plugging particle, the less difficult it is to form a plugging layer. When the ratio of particle size to fracture width is 0.45, the formation of the plugging layer is mainly controlled by the mass concentration of the temporary plugging particle and the viscosity of the carrier fluid, and a stable plugging layer cannot form if the mass concentration of the temporary plugging particle is less than 20 kg/m^(3)or the viscosity of the carrier fluid is greater than 3 mPa·s. When the ratio of particle size to fracture width is 0.60, the formation of the plugging layer is mainly controlled by the mass concentration of the temporary plugging particle, and a stable plugging layer cannot form if the mass concentration of the temporary plugging particle is less than 10 kg/m^(3). When the ratio of particle size to fracture width is 0.75, the formation of the plugging layer is basically not affected by other parameters, and a stable plugging layer can form within the experimental conditions. The formation process of plugging layer includes two stages and four modes. The main controlling factors affecting the formation mode are the ratio of particle size to fracture width, carrier fluid displacement and carrier fluid viscosity.

关键词： hydraulic fracture temporary plugging and diversion temporary plugging particle plugging characteristics construction parameters combination

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Erosion characteristics and simulation charts of sand fracturing casing perforation

引用

Petroleum Science 2023年第6期20卷 3638-3653页

作者： Shan-Zhi Shi Si-Song Zhang Ning Cheng Gang Tian De-Zhi Zeng Hui-Yong Yu Xi Wang Xin Zhang Research Institute of Engineering Technology PetroChina Xinjiang Oilfield CompanyKaramay834000XinjiangChina State Key Laboratory of oil&gas Reservoir Geology and Exploitation Southwest Petroleum UniversityChengdu610500SichuanChina

Large-scale sand fracturing is a necessary means in the efficient exploitation of shale gas/oil.However,in the process of fracturing operation,the sand carrying fluid and proppant easily causes scouring and wear to production strings,especially the casing perforation system,which damage the wellbore integrity and deformation to affect the subsequent fracturing.For this problem,taking the actual construction conditions and perforation technology of an oilfield in western China as an example,the structural parameters of the downhole string were measured and the wall thickness reduction model of casing perforation suitable for large-displacement sand fracturing in horizontal well section was established.With software ANSYS-FLUENT,the casing perforation erosion under the conditions of different displacements,sand content and perforation sand-passing quantity in the process of sand fracturing was simulated and calculated.The influences of three parameters on perforation erosion and expansion were analyzed and the prediction chart of the influences of three main control factors on perforation erosion and expansion was established.The perforation erosion images after fracturing construction were obtained with the downhole eagle perforation logging technology.The logging chart results were compared with the downhole eagle perforation data.The error between the established numerical simulation calculation charts and the real logging data was about 5%,indicating that the simulation charts were the valuable reference.

关键词： Sanding fracturing Erosion Numerical simulation Casing perforation Solid-liquid flow

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Sequence structure, sedimentary evolution and their controlling factors of the Jurassic Lianggaoshan Formation in the East Sichuan Basin, SW China

引用

Petroleum Exploration and Development 2023年第2期50卷 293-305页

作者： CHENG Dawei ZHANG Zhijie HONG Haitao ZHANG Shaomin QIN Chunyu YUAN Xuanjun ZHANG Bin ZHOU Chuanmin DENG Qingjie PetroChina Research Institute of Petroleum Exploration&Development Beijing 100083China PetroChina Key Laboratory of oil&gas Reservoir Beijing 100083China PetroChina southwest oil and gas Field company Chengdu 610041China Research Institute of Exploration and Development PetroChina Southwest Oilfield CompanyChengdu 610041China Yangtze University Wuhan 430100China

Based on the data of outcrops, seismic sections, thin sections, heavy mineral assemblages and detrital zircon U-Pb dating, the sedimentary characteristics, lake level fluctuation and provenance characteristics of the Middle Jurassic Lianggaoshan Formation(J_(2)l) in eastern Sichuan Basin, SW China, were investigated to reveal the control of tectonic movements of the surrounding orogenic belts on the sedimentary systems. The J_(2)lmainly developed a delta–lake sedimentary system, which contained a complete third-order sequence that was subdivided into four lake level up-down cycles(fourth-order sequence).The lake basins of cycles Ⅰ and Ⅱ were mainly distributed in eastern Sichuan Basin, while the lake basins of cycles Ⅲ and Ⅳ migrated to central Sichuan Basin, resulting in the significant difference in sedimentary characteristics between the north and the south of eastern Sichuan Basin. The provenance analysis shows that there were three types of provenances for J_(2)l. Specifically, the parent rocks of Type Ⅰ were mainly acidic igneous rocks and from the proximal northern margin of the Yangtze Plate;the parent rocks of Type Ⅱ were intermediate-acid igneous rocks and metamorphic rocks and from the central parts of the southern and northern Qinling orogenic belts;the parent rocks of Type Ⅲ were mainly metamorphic rocks followed by intermediate–acid igneous rocks, and from the North Daba Mountain area. It is recognized from the changes of sedimentary system and provenance characteristics that the sedimentary evolution of J_(2)lin eastern Sichuan Basin was controlled by the tectonic compression of the Qinling orogenic belt. In the early stage, the lake basin was restricted to the east of the study area, and Type Ⅰ provenance was dominant. With the intensifying north-south compression of the Qinling orogenic belt, the lake basin expanded rapidly and migrated northward, and the supply of Type Ⅱ provenance increased. In the middle and late stages, the uplift of the North Daba Mountain led to the lake basin migration and

关键词： Sichuan Basin Jurassic Lianggaoshan Formation heavy mineral assemblage zircon U-Pb dating lake basin migration provenance analysis basin-mountain evolution

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Study on characteristics of well-test type curves for composite reservoir with sealing faults

引用

Petroleum 2018年第3期4卷 309-317页

作者： Qiguo Liu Heng Lu Longxin Li Aiting Mu School of oil&gas Engineering Southwest Petroleum UniversityChengduSichuanPR China Exploration and Development Research Institute of PetroChina southwest oil and gas Field company PR China

The pressure response for the composite reservoirs with a sealing fault locating in inner and outer region is different,which neglected by previous researchers,would cause significant errors during well-test interpretations.Based on seepage theory,a well-test model of two-region radial composite reservoir with infinite outer boundary has been built in this study considering wellbore storage and skin effects.The solutions for this model and characteristics of the type curves have been analyzed by applying the method of mirror image,Laplace transformation and superposition principle,including a straight fault,a perpendicular fault and parallel faults cases.The study shows that the dimensionless pressure derivative curves would be obviously different in two cases:the well to fault distance is larger,and smaller than the half length of the inner-region radius.Therefore,type curves are presented with reasonable parameters to analyze the distance effect on the dynamic pressure response.The results in this study are of great significance。

关键词： Composite reservoir Sealing faults Well-test interpretation Dynamic pressure response Superposition principle

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

An Auxiliary Monitoring Method for Well Killing Based on Statistical Data

引用

Fluid Dynamics & Materials Processing 2023年第8期19卷 2109-2118页

作者： Shuang Liang Fangyu Luo Huihui Yu Jian Gao Xiaolin Shu CNPC Research Institute of Safety&Environment Technology BeijingChina Environmental Protection and Technical Supervision Research Institute PetroChina Southwest Oil&Gas Field CompanyShanghaiChina West East Pipeline company of PipeChina ShanghaiChina

In the present study,a large set of data related to well killing is considered.Through a complete exploration of the whole process leading to well-killing,various factors affecting such a process are screened and sorted,and a correlation model is built accordingly in order to introduce an auxiliary method for well-killing monitoring based on statistical information.The available data show obvious differences due to the diverse control parameters related to different well-killing methods.Nevertheless,it is shown that a precise three-fold relationship exists between the reservoir parameters,the elapsed time and the effectiveness of the considered well-killing strategy.The proposed monitoring auxiliary method is intended to support risk assessment and optimization in the context of typical well-killing applications.

关键词： Well-killing Big Data monitoring

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Anti-drilling ability of Ziliujing conglomerate formation in Western Sichuan Basin of China

引用

Petroleum 2023年第1期9卷 41-52页

作者： Nian Peng Tianshou Ma Gongsheng Zhu Qiang Su State Key Laboratory of oil and gas Reservoir Geology and Exploitation Southwest Petroleum UniversityChengdu610500China Drilling&Production Engineering Technology Research Institute CNPC Chuanqing Drilling Engineering Co.Ltd.Guanghan618300China Engineering Technology Research Institute PetroChina Southwest Oil&Gas Field CompanyChengdu610052China

The conglomerate rock is usually featured by strong heterogeneity,high abrasiveness,and poor drillability due to its complex composition and texture,which brought a huge challenge for drilling efficiency.In order to guide the drill bit selection and high-efficiency drilling,the physical,mechanical,and drillability characteristics were investigated for conglomerate rock that collected from the lower Jurassic Ziliujing formation in the Western Sichuan Basin of China.The mineral composition,SEM micro-structure,P-and S-wave velocities,uniaxial and triaxial compressive testing,drillability,abrasiveness were systematically tested and analyzed.The mechanical properties and anti-drilling ability of Ziliujing formation were proposed for a typical deep well of S-07,and the distribution characteristics were analyzed.The results indicated that the Ziliujing rock is rich-in quartz and clay minerals,due to the co-existing of strong quartz gravel and weak argillaceous cement,the Ziliujing rock shows strong heterogeneity.The relationships are roughly linear among UCS,drillability,and grinding weight loss with P-wave velocity.The Young's modulus,UCS,internal friction angle,drillability,and abrasiveness meet the Weibull distribution pattern,while only the Poisson's ratio meets the Kernel Smooth distribution pattern.Logging interpretation results reval that the Ziliujing formation has the Young's modulus of 38.61±17.08 GPa,the Poisson's ratio of 0.327±0.006,the internal friction angle of 49.21±11.00°,the drillability of 8.04±1.54,and the abrasiveness grade of 4.32±1.94.The mechanical properties and anti-drilling ability of logging interpretation are in good agreement with the experimental data.The Ziliujing formation is a kind of hard rock with strong heterogeneity,high strength,poor drillability,and medium abrasiveness.Based on the characteristics of Ziliujing formations,the SV516TAUL PDC bit with non-planar cutters was selected for the field application due to the good abrasion resistance,impact resistance,self-sharpening and the

关键词： Conglomerate rock Ziliujing formation Mechanical properties Drillability Drill bit selection

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Characteristics and Mechanism of Upper Permian Reef Reservoirs in the Eastern Longgang Area, Northeastern Sichuan Basin, China

引用

Petroleum 2020年第2期6卷 130-137页

作者： Lei Tan Hong Liu Yuzhe Tang Bing Luo Ya Zhang Yuran Yang Yisha Liao Weifeng Du Xiran Yang School of Geosciences and Technology Southwest Petroleum UniversityChengdu610500China Beijing Petroleum Machinery Co. CNPC Engineering Technology R&D Company LimitedBeijing102206China The Institute of Exploration and Development of southwest oil and gas Field Branch PetroChinaChengdu610059China Chongqing gas Field Southwest Oil&Gas Field CompanyPetroChinaChongqing400021China Bureau of Geophysical Prospecting China National Petroleum Corp Zhuozhou072750China Northwest Sichuan gas Field Southwest Oil&Gas Field CompanyPetroChinaJiangyou621709China

As a typical kind of lithologic reservoirs,reef reservoirs are generally featured by their large single-well reservoir thickness,good reservoir physical properties,and high gas well productivity.The Upper Permian Changxing Formation is an important natural gas exploration target in the Sichuan Basin,which hosts a large reef gas reservoir and is mainly distributed along the Kaijiang-Liangping Trough.Comprehensive analyses are implemented to investigate reservoir characteristics and identify controlling factors of reef reservoirs in Changxing Formation in the Eastern Longgang Area,Northeastern Sichuan Basin,including core,logging,and seismic data analyses.Changxing Formation reservoirs in the study area mainly occur in the reef-shoal complex,which are featured by wide distribution,large thickness and generally good physical properties.Reservoir rocks are dominantly composed of bioclastic dolomite and silty-fine dolomite(with grain phantom structure),while the main reservoir space consists of residual intergranular pores,intergranular dissolution pores,and karst vugs.In the seismic profiles,typical mound-shaped chaotic reflections can be clearly seen.It is suggested by the main reservoir development controlling factor analysis that the distributions of reef reservoirs are typically controlled by sedimentary facies belts,while the scale of the reef-shoal complex is determined by the pene-sedimentary micro-paleo-geomorphology.Dolomitization can not only significantly preserve the primary pores but also enhance the permeability of rocks.Moreover,karstification is the key to high-quality reef-shoal reservoirs.

关键词： Changxing formation Reef Reservoir characteristics Essential factors Eastern longgang

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Optimizing the Diameter of Plugging Balls in Deep Shale gas Wells

引用

Fluid Dynamics & Materials Processing 2024年第3期20卷 609-624页

作者： Yi Song Zheyu Hu Cheng Shen Lan Ren Xingwu Guo Ran Lin Kun Wang Zhiyong Zhao Shale gas Research Institute PetroChina Southwest Oil&Gasfield CompanyChengdu610056China State Key Laboratory of oil&gas Reservoir Geology and Exploitation Southwest Petroleum UniversityChengdu610500China National Pipe Network Group Sichuan East Natural gas Transmission Pipeline Co. Ltd.Wuhan430205China Fracturing Acidizing company Downhole Operation Company of Chuanqing Drilling Engineering Co.Ltd.Chengdu610213China

Deep shale gas reserves that have been fractured typically have many relatively close perforation holes. Due to theproximity of each fracture during the formation of the fracture network, there is significant stress interference,which results in uneven fracture propagation. It is common practice to use “balls” to temporarily plug fractureopenings in order to lessen liquid intake and achieve uniform propagation in each cluster. In this study, a diameteroptimization model is introduced for these plugging balls based on a multi-cluster fracture propagationmodel and a perforation dynamic abrasion model. This approach relies on proper consideration of the multiphasenature of the considered problem and the interaction force between the involved fluid and solid phases. Accordingly,it can take into account the behavior of the gradually changing hole diameter due to proppant continuousperforation erosion. Moreover, it can provide useful information about the fluid-dynamic behavior of the consideredsystem before and after plugging. It is shown that when the diameter of the temporary plugging ball is1.2 times that of the perforation hole, the perforation holes of each cluster can be effectively blocked.

关键词： Deep shale gas fracture propagation fluid mechanics fluid-solid coupling perforation hole abrasion

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Analysis of Wellbore Flow in Shale gas Horizontal Wells

引用

Fluid Dynamics & Materials Processing 2023年第11期19卷 2813-2825页

作者： Linjuan Zeng Daogang Cai Yunhai Zhao Changqing Ye Chengcheng Luo Engineering Technology Research Institute of southwest oil&gas Field company PetroChinaChengdu610000China School of Petroleum and Natural gas Engineering Southwest Petroleum UniversityChengdu610500China

Theflow behavior of shale gas horizontal wells is relatively complex,and this should be regarded as the main reason for which conventional pipeflow models are not suitable to describe the related dynamics.In this study,numerical simulations have been conducted to determine the gas-liquid distribution in these wells.In particular,using the measuredflow pressure data related to 97 groups of shale gas wells as a basis,9 distinct pipeflow models have been assessed,and the models displaying a high calculation accuracy for different water-gas ratio(WGR)ranges have been identified.The results show that:(1)The variation law of WGR in gas well satisfies a power function relation.(2)The well structure is the main factor affecting the gas-liquid distribution in the wellbore.(3)The Beggs&Brill,Hagedorn&Brown and Gray models exhibit a high calculation accuracy.

关键词： Shale gas horizontal well production characteristics wellbore gas-liquid distribution pipeflow model

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A Dynamic Plunger Lift Model for Shale gas Wells

引用

Fluid Dynamics & Materials Processing 2023年第7期19卷 1735-1751页

作者： Shiyu Miao Xiao Liu Xiaoya Feng Haowen Shi Wei Luo Peng Liu Petroleum Engineering Institute of Yangtze University Wuhan430100China Laboratory of Multiphase Pipe Flow Gas Lift Innovation CenterChina National Petroleum Corp.Yangtze UniversityWuhan430100China Key Laboratory of Drilling and Production Engineering for oil and gas Wuhan430100China Sichuan Shale gas Exploration and Development Limited Liability company Chengdu640000China Sichuan Changning gas Development company PetroChina Southwest Oil&Gas Field CompanyChengdu610051China oil and gas Technology Research Institute of Changqing oilfield company PetroChinaXi’an710018China

At present,the optimization of the plunger mechanism is shale gas wells is mostly based on empirical methods,which lack a relevant rationale and often are not able to deal with the quick variations experienced by the production parameters of shale gas wells in comparison to conventional gas wells.In order to mitigate this issue,in the present work,a model is proposed to loosely couple the dynamics of gas inflow into shale gas wells with the dynamics of the liquid inflow.Starting from the flow law that accounts for the four stages of movement of the plunger,a dynamic model of the plunger lift based on the real wellbore trajectory is introduced.The model is then tested against 5 example wells,and it is shown that the accuracy level is higher than 90%.The well‘switch’,optimized on the basis of simulations based on such a model,is tested through on-site experiments.It is shown that,compared with the original switch configuration,the average production of the sample well can be increased by about 15%.

关键词： Shale gas well complex and more complex well bore structure plunger lift loose coupling simulation model

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：