检索结果-南通市图书馆

High-Temperature Stability of Mg-1Al-12Y Alloy Containing LPSO Phase and Mechanism of Its Portevin-Le Chatelier(PLC)Effect

引用

Acta Metallurgica Sinica(English Letters) 2024年第6期37卷 982-998页

作者： Qian-Long Ren Shuai Yuan Shi-Yu Luan Jin-Hui Wang Xiao-Wei Li Xiao-Yu Liu Qinghai Provincial Key Laboratory of New light alloys Qinghai Provincial Engineering Research Center of High Performance Light Metal Alloys and FormingQinghai UniversityXining810016China School of Materials Science and Engineering Shenyang University of TechnologyShenyang110870China

In this study,the high-temperature stability and the generation mechanism of the Portevin-Le Chatelier(PLC)effect in solid-solution Mg-1Al-12Y alloy with different heat treatment processes were investigated by adjusting the content of long-period stacking ordered(LPSO)*** was found that the content of LPSO phases in the alloys differed the most after heat treatment at 530℃for 16 h and 24 h,with values of 13.56%and 3.93%***,high-temperature tensile experiments were conducted on these two alloys at temperatures of 150℃,200℃,250℃,and 300℃.The results showed that both alloys exhibited the PLC effect at temperatures ranging from 150 to 250℃.However,at a temperature 300℃,only the alloy with a greater concentration of LPSO phases exhibited the PLC effect,whereas the alloy with a lower proportion of LPSO phases did not exhibit this ***,both alloys exhibited remarkable high-temperature stability,with the alloy containing a greater percentage of LPSO phases also demonstrating superior *** underlying mechanism for this phenomenon lies in the exceptional high-temperature stability exhibited by the second phase within the ***,the LPSO phase effectively obstructs the movement of dislocations,and it also undergoing kinking to facilitate plastic deformation of the *** results indicate that the PLC effect can be suppressed by reducing dislocation pile-up at grain boundaries,which leads to a decrease in alloy plasticity but an increase in *** presence of the PLC effect in the WA121 alloy is attributed to the abundant dispersed second phase within the alloy,which initially hinders the movement of dislocations,leading to an increase in stress,and subsequently releases the dislocations,allowing them to continue their movement and thereby reducing in stress.

关键词： Magnesium alloy Long-period stacking ordered(LPSO)phase Portevin-Le Chatelier effect High temperature

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Hot Deformation Behavior and Microstructures Evolution of GNP-Reinforced Fine-Grained Mg Composites

引用

Acta Metallurgica Sinica(English Letters) 2024年第3期37卷 407-424页

作者： Hengrui Hu Jiayu Qin Yunpeng Zhu Jinhui Wang Xiaoqiang Li Peipeng Jin Qinghai Provincial Key Laboratory of New light alloys Qinghai UniversityXining 810016China Qinghai Provincial Engineering research center of High Performance light Metal alloys and Forming Qinghai UniversityXining 810016China Department of Mechanical Engineering Tsinghua UniversityBeijing 100084China School of Material Science and Engineering Lanzhou University of TechnologyLanzhou 730050China

Graphene nanoplates(GNPs)-reinforced magnesium matrix composites have been attracted great ***,knowledge is lack for the hot deformation behavior of GNP-reinforced magnesium(GNPs/Mg)*** this study,the fine-grained GNPs/Mg composite was fabricated by powder metallurgy process followed by *** hot deformation behavior,microstructure evolution and dynamic recrystallization(DRX)mechanism of fine-grained GNPs/Mg composite were investigated by hot compression test and electron back-scatter diffraction(EBSD).The hot compression tests of the composite were conducted at temperatures between 423 and 573 K with the strain rates from 0.001 to 1 s^(-1).The strain compensated power law equation was established to describe the hot deformation behavior of the *** stress exponent and activation energy of the composite are 7.76 and 83.23 kJ/mol,respectively,suggesting that the deformation mechanism is grain boundary slip controlled dislocation climb *** abnormally high stress exponent and activation energy are unattainable in the composite due to the fine grain size of the composites and the absence of Zener pinning and Orowan effects of GNPs *** grain size increases with the decrease in Zener-Hollomn(Z)parameter,which can be well fitted by power-law *** the increase in grain size and decrease in Z parameter,the geometrically necessary dislocation density decreases,which shows the approximately power-law relationship.A random and weak texture was formed after hot *** discontinuous dynamic recrystallization and continuous dynamic recrystallization mechanism dominated the DRX behavior at 473 K/0.001 s^(-1) and 573 K/0.001 s^(-1),respectively.

关键词： GNPs Mg composite Hot deformation behavior Constitutive equations Microstructure evolution Dynamic recrystallization

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Anomalous response to creep deformation from dislocation density during electrically assisted creep aging

引用

Rare Metals 2024年第10期43卷 5268-5283页

作者： Chang Zhou Li-Hua Zhan Chun-Hui Liu Ming-Hui Huang College of Mechanical and Electrical Engineering Central South University light alloys research Institute State Key Laboratory of Precision Manufacturing for Extreme Service PerformanceCentral South University

Adding numerous dislocations into metallic materials before the forming stage significantly enhances their deformability. However, this beneficial effect of dislocation defects may not have a simple monotonic relationship with increased dislocation density during electroplastic deformation. This is due to the complex interactions among the drifting electrons, dislocations and solute atoms. This study explores the effect of diverse initial dislocation densities on creep deformation during electrically aided creep aging of an aluminum–lithium alloy. Surprisingly, we discovered a threshold value for the dislocation density that affects electroplastic creep, i.e., an enhanced effect from dislocations weakens when exceeding this density threshold(an anomalous response to creep). Microstructural data also reveal that such an anomalous response originates mainly from differences in various dislocation density-tailored configurations, which can influence the dislocation motions and precipitation kinetics of the strengthening T1precipitates under the same action of pulsed currents. This study provides important insights into the dislocation density-mediated electroplastic creep of an aluminum–lithium alloy.

关键词： Al–Cu–Li alloy Creep aging Dislocation density Pulsed currents

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Current progress of research on heat -resistant Mg alloys: A review

引用

International Journal of Minerals,Metallurgy and Materials 2024年第6期31卷 1406-1425页

作者： Hong Yang Wenlong Xie Jiangfeng Song Zhihua Dong Yuyang Gao Bin Jiang Fusheng Pan National Engineering research center for Magnesium alloys Chongqing UniversityChongqing 400044China College of Materials Science and Engineering Chongqing UniversityChongqing 400044China

With the increasing attention received by lightweight metals,numerous essential fields have increased requirements for mag-nesium(Mg)alloys with good room-temperature and high-temperature mechanical ***,the high-temperature mechanic-al properties of commonly used commercial Mg alloys,such as AZ91D,deteriorate considerably with increasing *** the past several decades,extensive efforts have been devoted to developing heat-resistant Mg *** approaches either inhibit the gen-eration of thermally unstable phases or promote the formation of thermally stable precipitates/phases in matrices through solid solution or precipitation *** this review,numerous studies are systematically introduced and *** alloy systems,includ-ing those based on Mg–Al,Mg–Zn,and Mg–rare earth,are carefully classified and compared to reveal their mechanical properties and strengthening *** emphasis,limitations,and future prospects of these heat-resistant Mg alloys are also pointed out and dis-cussed to develop heat-resistant Mg alloys and broaden their potential application areas in the future.

关键词： magnesium alloys mechanical properties heat resistance microstructures high temperatures strengthening mechanisms

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Fabrication of AZ31/Mg3Y Composites with Excellent Strength and Plasticity via Accumulated Rolling Bonding and Diffusion Annealing

引用

Acta Metallurgica Sinica(English Letters) 2024年第2期37卷 339-352页

作者： Yang Feng Wenhuan Chen Zheng Xu Weijun He Bin Jiang Fusheng Pan College of Materials Science and Engineering Chongqing UniversityChongqing400044China International Joint Laboratory for light alloys(Ministry of Education) Chongqing UniversityChongqing400044China

AZ31/Mg3Y composites with a layer thickness of 100-200μm were fabricated by accumulated rolling bonding(ARB),which was followed by diffusion annealing at 300℃ for 0-32 *** interface layer,containing numerous Al-Y precipitates,is formed in the Mg3Y layer that is adjacent to the interface as a result of Al diffusing from the AZ31 layers into the Mg3Y *** thickness of the interface layer gets increased and more precipitates are formed in the interface layer with the extension of the annealing *** microhardness of the AZ31 and Mg3Y layer decreases firstly and then reaches a stable value,while the microhardness of the interface layer increases gradually with the extension of the annealing *** AZ31/Mg3Y composites exhibit equivalent strength but increased ductility after diffusion annealing,in comparison to the as-rolled AZ31/Mg3Y *** addition,the AZ31/Mg3Y composites after annealing always present higher strength and ductility than AZ31/AZ31 composite,which was fabricated by the same process as that for the AZ31/Mg3Y ***-deformation induced strengthening also plays an important role in the excellent strength and ductility of the annealed AZ31/Mg3Y *** study can provide a direction for improving the plasticity and strength of magnesium alloys synergistically.

关键词： AZ31/Mg3Y composite Accumulated rolling bonding Diffusion annealing Precipitates Strengthening

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Segregation of Mg-6Gd alloy under natural convection:From macro solute distribution to micro dendrite growth

引用

China Foundry 2024年第5期21卷 613-624页

作者： Hong-xu Chen Ang Zhang Hao Li Yu Gao Yu-hong Cui Guang-sheng Huang Bin Jiang Fu-sheng Pan National Engineering research center for Magnesium alloys National Key Laboratory of Advanced Casting TechnologiesCollege of Materials Science and EngineeringChongqing UniversityChongqing 400044China

Segregation is a serious defect in alloy ingots which severely deteriorates materials *** segregation defect in Mg-6Gd alloy is studied by coupling macro thermal-solutal-convection transport and micro dendrite *** macroscopic fluid dynamics and mass transfer equations are resolved to forecast the segregation behavior under conditions of continuous temperature variation during the solidification *** numerical model is validated by testing double-diffusive natural convection in a closed square cavity.A phase field model is then applied to simulate the micro dendrite growth,using macro undercooling and liquid flow velocity as boundary *** show that the multiscale segregation behavior,including macro solute distribution and micro dendritic morphology,is strongly dependent on the temperature condition and the liquid convection,which provides guidance for reducing and eliminating the segregation defect.

关键词： magnesium alloy segregation numerical simulation phase-field simulation multiscale

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Degradation Behavior of Zn-Cu Stents with Different Coatings in Sodium Chloride Solution

引用

Acta Metallurgica Sinica(English Letters) 2024年第9期37卷 1564-1580页

作者： Xingpeng Liao Jialuo Huang Zhilin Liu Jingru Guo Dajiang Zheng Pengbo Chen Fuyong Cao center for Marine Materials Corrosion and Protection Fujian Key Laboratory of Surface and Interface Engineering for High Performance MaterialsCollege of MaterialsXiamen UniversityXiamen361005China light alloys research Institute College of Mechanical and Electrical EngineeringCentral South UniversityChangsha410083China First Affiliated Hospital of Xi’an Jiao Tong University Xi’an710061China

The Zn0.6Cu wires are fabricated into stents for the potential biodegradable application of nasal wound *** degradation behavior of Zn0.6Cu stents in 0.9 wt%NaCl at 36.5℃ is *** shows that the untreated Zn0.6Cu stent experiences severe crevice corrosion with acceleration and autocatalytic effects within the micro-cracks and ruptures at 4.67±1.15 d,with the average corrosion rate of 0.28 mm y^(-1).Fortunately,the anodic polarization(AP)+hydrothermal(H)conversion coating,consisting of ZnCO_(3),Zn(OH)_(2) and ZnO,could inhibit the crevice corrosion significantly by reducing the cathode/anode ratio,extending the rupture time up to 16.50±2.95 d,with the average corrosion rate of 0.14 mm y^(-1).This research indicates that the biodegradable Zn-based stent has some potential applications in nasal wound recovery area.

关键词： Zn alloys wires Corrosion behavior Biodegradable stents Coating Degradation characterization

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effects of processing parameters on fabrication defects,microstructure and mechanical properties of additive manufactured Mg–Nd–Zn–Zr alloy by selective laser melting process

引用

Journal of Magnesium and alloys 2024年第6期12卷 2249-2266页

作者： Wenyu Xu Penghuai Fu Nanqing Wang Lei Yang Liming Peng Juan Chen Wenjiang Ding National Engineering research center of light Alloy Net Forming and State Key Laboratory of Metal Matrix Composite School of Materials Science and EngineeringShanghai Jiao Tong University800 Dongchuan RoadShanghai 200240China Shanghai light Alloy Net Forming National Engineering research center Co. LtdShanghai 201615China

Mg–3Nd–0.2Zn–0.4Zr(NZ30K,wt.%)alloy is a new kind of high-performance metallic *** combination of the NZ30K Magnesium(Mg)alloy and selective laser melting(SLM)process seems to be an ideal solution to produce porous Mg degradable ***,the microstructure evolution and mechanical properties of the SLMed NZ30K Mg alloy were not yet studied ***,the fabrication defects,microstructure,and mechanical properties of the SLMed NZ30K alloy under different processing parameters were *** results show that there are two types of fabrication defects in the SLMed NZ30K alloy,gas pores and unfused *** the increase of the laser energy density,the porosity sharply decreases to the minimum first and then slightly *** minimum porosity is 0.49±0.18%.While the microstructure varies from the large grains with lamellar structure inside under low laser energy density,to the large grains with lamellar structure inside&the equiaxed grains&the columnar grains under middle laser energy density,and further to the fine equiaxed grains&the columnar grains under high laser energy *** lamellar structure in the large grain is a newly observed microstructure for the NZ30K Mg *** laser energy density leads to finer grains,which enhance all the yield strength(YS),ultimate tensile strength(UTS)and elongation,and the best comprehensive mechanical properties obtained are YS of 266±2.1 MPa,UTS of 296±5.2 MPa,with an elongation of 4.9±0.68%.The SLMed NZ30K Mg alloy with a bimodal-grained structure consisting of fine equiaxed grains and coarser columnar grains has better elongation and a yield drop phenomenon.

关键词： Selective laser melting Mg alloy Processing parameter Lamellar structure Bimodal-grained structure

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A Special Editor’s Issue on Magnesium Matrix Composites

引用

Acta Metallurgica Sinica(English Letters) 2024年第3期37卷 389-390页

作者： Xianhua Chen Hong Yang College of Materials Science and Engineering Chongqing UniversityChongqing 400045China National Engineering research center for Mg alloys Chongqing UniversityChongqing 400045China

Magnesium(Mg)alloys offer distinct advantages as one of the lightest structural *** remarkable weight advantages,being 35%lighter than aluminum alloy and a striking 78%lighter than steel,make them a focal point for research in automotive and aerospace *** emphasis stems from the overarching goal of reducing energy costs and enhancing overall performance[1,2].

关键词： alloy steel alloys

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Regulating Anderson localization with structural defect disorder

引用

Chinese Physics B 2024年第10期33卷 102-107页

作者： Mouyang Cheng Haoxiang Chen Ji Chen School of Physics Peking UniversityBeijing 100871China Interdisciplinary Institute of light-Element Quantum Materials and research center for light-Element Advanced Materials Peking UniversityBeijing 100871China Frontiers Science center for Nano-Optoelectronics Peking UniversityBeijing 100871China Collaborative Innovation center of Quantum Matter Beijing 100871China

Localization due to disorder has been one of the most intriguing theoretical concepts that evolved in condensed matter ***,we expand the theory of localization by considering two types of disorders at the same time,namely,the original Anderson’s disorder and the structural defect disorder,which has been suggested to be a key component in recently discovered two-dimensional amorphous *** increasing the degree of both disorders could induce localization of wavefunction in real space,we find that a small degree of structural defect disorder can significantly enhance the *** the degree of structural defect disorder increases,localized states quickly appear within the extended phase to enter a broad crossover region with mixed *** establish two-dimensional diagrams for the wavefunction localization and conductivity to highlight the interplay between the two types of *** theoretical model provides a comprehensive understanding of localization in two-dimensional amorphous materials and highlights the promising tunability of their transport properties.

关键词： Anderson localization structural defect disorder electronic transport properties

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：