检索结果-南通市图书馆

Multiple damage zones around hydraulic fractures generated by high-frequency pulsating hydraulic fracturing

petroleum Science 2024年第4期21卷 2688-2702页

作者： Yan Peng Sheng-Jie Wei Guang-Qing Zhang Da-Wei Zhou Chuang-Chao Xu School of petroleum Engineering China University of Petroleum PetroChina Changqing Oilfield company

Pulsating hydraulic fracturing(PHF) is a promising fracturing method and can generate a dynamic periodic pressure. The periodic pressure can induce fatigue failure of rocks and decrease initiation pressure of fracture. If the frequency of periodic pressure exceeds 10 Hz, the distribution of pressure along the main fracture will be heterogeneous, which is much different from the one induced by the common fracturing method. In this study, the impact of this special spatial feature of pressure on hydraulic fracture is mainly investigated. A coupled numerical simulation model is first proposed and verified through experimental and theoretical solutions. The mechanism of secondary fracture initiation around the main fracture is then discovered. In addition, sensitivity studies are conducted to find out the application potential of this new method. The results show that(1) this coupled numerical simulation model is accurate. Through comparison with experimental and theoretical data, the average error of this coupled model is less than 1.01%.(2) Even if a reservoir has no natural fracture, this heterogeneous distribution pressure can also cause many secondary fractures around the main fracture.(3) The mechanism of secondary fracture initiation is that this heterogeneous distribution pressure causes tensile stress at many locations along the main fracture.(4) Through adjusting the stimulation parameters, the stimulation efficiency can be improved. The average and amplitude of pressure can increase possibility of secondary fracture initiation. The frequency of this periodic pressure can increase number of secondary fractures. Even 6 secondary fractures along a 100 m-length main fracture can be generated.(5) The influence magnitudes of stimulation parameters are larger than ones of geomechanical properties, therefore, this new fracturing method has a wide application potential.

关键词： Tight reservoir Reservoir stimulation Numerical simulation Secondary fracture Fracture initiation

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Fracture geometry and breakdown pressure of radial borehole fracturing in multiple layers

引用

petroleum Science 2024年第1期21卷 430-444页

作者： Yu-Ning Yong Zhao-Quan Guo Shou-Ceng Tian Lu-Yao Ma Tian-Yu Wang Mao Sheng National Key Laboratory of petroleum Resources and Engineering China University of Petroleum(Beijing)Beijing102249China Beijing petroleum machinery company Limited CNPC Engineering Technology R&D Company LimitedBeijing102206China Smart Energy Co. LtdChina Xiongan GroupXiong’an New Area071000HebeiChina

Radial borehole fracturing that combines radial boreholes with hydraulic fracturing is anticipated to improve the output of tight oil and gas *** paper aims to investigate fracture propagation and pressure characteristics of radial borehole fracturing in multiple layers.A series of laboratory experiments with artificial rock samples(395 mm×395 mm×395 mm)was conducted using a true triaxial fracturing *** crucial factors corresponding to the vertical distance of adjacent radial borehole layers(vertical distance),the azimuth and diameter of the radial borehole are *** results show that radial borehole fracturing in multiple layers generates diverse fracture *** types of fractures are identified based on the connectivity between hydraulic fractures and radial *** vertical distance significantly influences fracture propagation perpendicular to the radial borehole *** increase in the vertical distance impedes fracture connection across multiple radial borehole layers and reduces the fracture propagation distance along the radial borehole *** azimuth also influences fracture propagation along the radial borehole *** the azimuth reduces the guiding ability of radial boreholes,which makes the fracture quickly curve to the maximum horizontal stress *** breakdown pressure correlates with diverse fracture geometries *** the fractures connect multi-layer radial boreholes,increasing the vertical distance decreases the breakdown *** the azimuth and increasing the diameter also decrease the breakdown *** extrusion force exists between the adjacent fractures generated in radial boreholes in multiple rows,which plays a crucial role in enhancing the guiding ability of radial boreholes and results in higher breakdown *** research provides valuable theoretical insights for the field application of radial borehole fracturing technology in tight oil and g

关键词： Multi-layer radial boreholes Hydraulic fracturing Fracture propagation Pressure characteristic

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

New model of linkage evolution for the transtensional fault systems in the Nanpu Sag of Bohai Bay Basin: Insight from seismic interpretation and analogue modelling

引用

petroleum Science 2024年第4期21卷 2287-2310页

作者： Yu-Heng Wang Fu-Sheng Yu Bao-Yin Zhao Ling-Jian Meng College of Geosciences China University of Petroleum (Beijing) State Key Laboratory of petroleum Resources and Prospecting China University of Petroleum (Beijing) Jidong Oilfield company PetroChina Limited Company

The evolution of faults within the same stress field is frequently influenced by numerous factors,involving the reactivation of pre-existing structures, stress transmission through ductile detachment layers, and the growth, interaction, as well as linkage of new fault segments. This study analyses a complex multi-phase oblique extension fault system in the Nanpu Sag(NPS) of the Bohai Bay Basin(BBB),China. High-resolution three-dimensional(3D) seismic data and analogue modelling indicate that the oblique extensional reactivation of pre-existing structures governs the sequential arrangement of fault segments in the caprock, and they dip synthetically to the reactivated fault at depth. During the NW-SE extension in the Eocene, the predominant movement of the pre-existing fault is strike-slip. Subsequently,during the N-S extension since the Oligocene, inclined at *** the pre-existing fault, forming splay fault segments and ultimately creating large en-echelon arcuate faults linked by relay ramps. Using fault throw-distance(T-D) and laser scanning, we reconstructed the fault evolution model of oblique extension reactivation in the presence of a ductile detachment basement. Our study illustrates that the arcuate faults can be categorized into linear master fault segments controlled by pre-existing structures, bending splay faults in the termination zone, and normal fault segments responding to the regional stress *** interaction between faults occurs among normal faults and strike-slip faults, and the kinematic unification of the two fault systems is accomplished in the intersection zone. As the faults continue to evolve, the new fault segments tend to relinquish the control of pre-existing structures and concentrate more on the development of planar and continuous major faults. The ductile detachment layer significantly contributes to the uniform distribution of strain, resulting in narrow shear zones and discontinuous normal faults in its absence.

关键词： Analogue modelling Transtensional deformation Fault linkage Fault intersection zone Nanpu Sag of Bohai Bay basin

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Microscopic experiment on efficient construction of underground gas storages converted from water-invaded gas reservoirs

引用

petroleum Exploration and Development 2024年第1期51卷 203-212页

作者： JIANG Tongwen QI Huan WANG Zhengmao LI Yiqiang WANG Jinfang LIU Zheyu CAO Jinxin PetroChina company Limited Beijing 100007China National Key Laboratory of petroleum Resources and Engineering China University of Petroleum(Beijing)Beijing 102249China College of petroleum Engineering China University of Petroleum(Beijing)Beijing 102249China PetroChina petroleum&New Energies company Beijing 100007China PetroChina Research Institute of petroleum Exploration&Development Beijing 100083China

Based on the microfluidic technology,a microscopic visualization model was used to simulate the gas injection process in the initial construction stage and the bottom water invasion/gas injection process in the cyclical injection-production stage of the underground gas storage(UGS)rebuilt from water-invaded gas *** analysis of the gas-liquid contact stabilization mechanism,flow and occurrence,the optimal control method for lifecycle efficient operation of UGS was *** results show that in the initial construction stage of UGS,the action of gravity should be fully utilized by regulating the gas injection rate,so as to ensure the macroscopically stable migration of the gas-liquid contact,and greatly improve the gas sweeping capacity,providing a large pore space for gas storage in the subsequent cyclical injection-production *** the cyclical injection-production stage of UGS,a constant gas storage and production rate leads to a low pore space *** increasing the gas storage and production rate,that is,transitioning from small volume to large volume,can continuously break the hydraulic equilibrium of the remaining fluid in the porous media,which then expands the pore space and flow *** is conducive to the expansion of UGS capacity and efficiency for purpose of peak shaving and supply guarantee.

关键词： water-invaded gas-reservoir underground gas storage cyclical injection-production gas-water contact gas storage and production rate UGS capacity expansion control method

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Prediction and quantification of effective gas source rocks in a lacustrine basin: Western Depression in the Liaohe Subbasin, China

引用

petroleum Science 2024年第4期21卷 2218-2239页

作者： Si-Bo Yang Mei-Jun Li Hong Xiao Fang-Zheng Wang Guo-Gang Cai Shuang-Quan Huang State Key Laboratory of petroleum Resources and Prospecting College of Geosciences China University of Petroleum China University of petroleum-Beijing at Karamay College of Petroleum Research Institute of petroleum Exploration and Development Liaohe Oilfield Company PetroChina

Due to limited data on the geochemical properties of natural gas, estimations are needed for the effective gas source rock in evaluating gas potential. However, the pronounced heterogeneity of mudstones in lacustrine successions complicates the prediction of the presence and geochemical characteristics of gas source rocks. In this paper, the Liaohe Subbasin of Northeast China is used as an example to construct a practical methodology for locating effective gas source rocks in typical lacustrine basins. Three types of gas source rocks, microbial, oil-type, and coal-type, were distinguished according to the different genetic types of their natural gas. A practical three-dimensional geological model was developed, refined, and applied to determine the spatial distribution of the mudstones in the Western Depression of the Liaohe Subbasin and to describe the geochemical characteristics(the abundance, type, and maturation levels of the organic matter). Application of the model in the subbasin indicates that the sedimentary facies have led to heterogeneity in the mudstones, particularly with respect to organic matter types. The effective gas source rock model constructed for the Western Depression shows that the upper sequence(SQ2) of the Fourth member(Mbr 4) of the Eocene Shahejie Formation(Fm) and the lower and middle sequences(SQ3 and SQ4) of the Third member(Mbr 3) form the principal gas-generating interval. The total volume of effective gas source rocks is estimated to be 586 km3. The effective microbial, oil-type, and coal-type gas source rocks are primarily found in the shallow western slope, the central sags, and the eastern slope of the Western Depression, respectively. This study provides a practical approach for more accurately identifying the occurrence and geochemical characteristics of effective natural gas source rocks, enabling a precise quantitative estimation of natural gas reserves.

关键词： Effective gas source rock 3D geological modeling Spatial distribution Geochemical characteristics Lacustrine rift basin

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Development and performance evaluation of high temperature resistant strong adsorption rigid blocking agent

引用

petroleum Science 2024年第4期21卷 2650-2662页

作者： Zhe Xu Jin-Sheng Sun Jing-Ping Liu Kai-He Lv Xiao-Dong Dong Zong-Lun Wang Tai-Feng Zhang Yuan-Wei Sun Zhi-Wen Dai School of petroleum Engineering China University of Petroleum (East China) CNPC Engineering Technology R&D company Limited

As drilling wells continue to move into deep ultra-deep layers, the requirements for temperature resistance of drilling fluid treatments are getting higher and higher. Among them, blocking agent, as one of the key treatment agents, has also become a hot spot of research. In this study, a high temperature resistant strong adsorption rigid blocking agent(QW-1) was prepared using KH570 modified silica,acrylamide(AM) and allyltrimethylammonium chloride(TMAAC). QW-1 has good thermal stability,average particle size of 1.46 μm, water contact angle of 10.5., has a strong hydrophilicity, can be well dispersed in water. The experimental results showed that when 2 wt% QW-1 was added to recipe A(4 wt% bentonite slurry+0.5 wt% DSP-1(filtration loss depressant)), the API filtration loss decreased from 7.8to 6.4 m L. After aging at 240.C, the API loss of filtration was reduced from 21 to 14 m L, which has certain performance of high temperature loss of filtration. At the same time, it is effective in sealing 80-100mesh and 100-120 mesh sand beds as well as 3 and 5 μm ceramic sand discs. Under the same conditions,the blocking performance was superior to silica(5 μm) and calcium carbonate(2.6 μm). In addition, the mechanism of action of QW-1 was further investigated. The results show that QW-1 with amide and quaternary ammonium groups on the molecular chain can be adsorbed onto the surface of clay particles through hydrogen bonding and electrostatic interaction to form a dense blocking layer, thus preventing further intrusion of drilling fluid into the formation.

关键词： High adsorption Rigid microsphere High temperature resistance Blocking performance

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Auto-tuning PVT data using multi-objective optimization: Application of NSGA-Ⅱ algorithm

引用

petroleum 2024年第1期10卷 135-149页

作者： Abdolhadi Zarifi Mohammad Madani Mohammad Jafarzadegan Reservoir Engineering Systems Petroleum Engineering Department Main Office Building of National Iranian South Oil Company (NISOC) Combined Planning Management National Iranian Oil Company (NIOC) Reservoir Engineering Division Petroleum Engineering Department Petroleum Engineering and Development Company (PEDEC)

Reservoir simulation is known as perhaps the most widely used, accurate, and reliable method for field development in the petroleum industry. An integral part of a reliable reservoir simulation process is to consider robust and rigorous tuned EOS models. Traditionally, EOS models are tuned iteratively through arduous workflows against experimental PVT data. However, this comes with a number of drawbacks such as forcingly using weight factors, which upon alteration adversely affects the optimization *** objective of the current work is thus to introduce an auto-tune PVT matching tool using NSGA-II multi-objective optimization. In order to illustrate the robustness of the presented technique, three different PVT samples are used, including two black-oil and one gas condensate sample. We utilize PengRobinson EOS during all the manual and auto-tuning processes. Comparison of auto-tuned EOS-generated results with those of experimental and computed statistical error values for these samples clearly show that the proposed method is robust. In addition, the proposed method, contrary to the manual matching process, provides the engineer with several matched solutions, which allows them to select a match based on the engineering background to be best amenable to the problem at hand. In addition, the proposed technique is fast, and can output several solutions within less time compared to the traditional manual matching method.

关键词： Auto-tuning PVT Equation of state NSGA-II Multi-objective optimization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Natural rubber latex as a potential additive for water-based drilling fluids

引用

petroleum Science 2024年第4期21卷 2677-2687页

作者： Jun Yang Guan-Cheng Jiang Jing-Tian Yi Yin-Bo He Li-Li Yang Teng-Fei Dong Guo-Shuai Wang College of petroleum Engineering China University of Petroleum (Beijing) National Engineering Research Center of Oil & Gas Drilling and Completion Technology Changqing Drilling General company CNPC Chuanqing Drilling Engineering Company Limited

The environmental hazards and "carbon footprint" of oil and gas drilling can be significantly reduced by replacing traditional petroleum-based chemical additives with natural materials derived from plants and animals. This paper explored for the first time the interaction mechanism between natural rubber latex(NRL) and bentonite suspensions(BTs) through a series of characterization experiments, as well as the potential applications in water-based drilling fluids(WBDF). The gel viscoelasticity experiments showed that NRL could decrease the consistency coefficient(k) and flow index(n) of BTs, and enhance the shear thinning performance of BTs as pseudo-plastic fluids. In addition, 0.5 w/v% NRL not only increased the critical yield stress and strengthened the structural strength between the bentonite particles, but also facilitated the compatibility of pressure loss and flow efficiency. The evaluation of colloidal stability and WBDF performance indicated that NRL particles could promote the hydration and charge stability on the surface of BTs particles, and optimize the particle size distribution and flow resistance of WBDF under the "intercalation-exfoliation-encapsulation" synergistic interaction. Moreover, NRL can improve the rheological properties of WBDF at high temperatures(<150.C), and form a dense blocking layer by bridging and sealing the pores and cracks of the filter cake, which ultimately reduces the permeability of the cake and the filtration loss of WBDF.

关键词： Natural materials Water-based drilling fluids Natural rubber latex Bentonite suspensions Filtration loss

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Application status and prospect of ionic liquids in oilfield chemistry

引用

petroleum 2024年第1期10卷 11-18页

作者： Jinsheng Sun Zhuoyang Xiu Li Li Kaihe Lv Xianfa Zhang Zonglun Wang Zhiwen Dai Zhe Xu Ning Huang Jingping Liu School of petroleum Engineering China University of Petroleum (East China) CNPC Engineering Technology R&D company Limited Oil & Gas Technology Research Institute of Changqing Oilfield company

The ionic liquid, as a new treatment agent, has been increasingly applied in oil fields due to its strong temperature resistance, good solubility and high surface activity. In this paper, we systematically discuss the action mechanism and application effect of ionic liquids in oilfield chemistry. Ionic liquids can inhibit shale hydration expansion and reduce fluid loss through adsorption and intercalation, inhibit the formation of natural gas hydrate through imidazole five-membered ring structure as a space barrier, reduce viscosity of heavy oil by breaking chemical bonds of heavy oil macromolecules and charge transfer,improve oil displacement efficiency by forming ions pairs with carboxyl groups in crude oil, demulsify by forming channels between dispersed water droplets, acidify the formation by reacting with water to produce acid, interacts with organic material through weak hydrogen bonds and extracts it from oilfield wastewater, desulphurize by inserting sulfide molecules into the “stack” structure and form liquid inclusion complex, inhibit corrosion by forming a protective film on the metal surface. Based on the above aspects, the development direction of ionic liquids is proposed. The application of ionic liquids in oilfield chemistry is still in its infancy. It is urgent to fully explore the application performance of ionic liquids in oilfield chemistry, which also provides theoretical and technical supports for efficient reservoir development.

关键词： Ionic liquids Oilfield chemistry Shale inhibitor Drilling fluid

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

An adaptive physics-informed deep learning method for pore pressure prediction using seismic data

引用

petroleum Science 2024年第2期21卷 885-902页

作者： Xin Zhang Yun-Hu Lu Yan Jin Mian Chen Bo Zhou State Key Laboratory of petroleum Resources and Prospecting China University of Petroleum(Beijing)Beijing102249China College of petroleum Engineering China University of Petroleum(Beijing)Beijing102249China College of Artificial Intelligence China University of Petroleum(Beijing)Beijing102249China PetroChina Tarim Oilfield company KorlaXinjiang841000China

Accurate prediction of formation pore pressure is essential to predict fluid flow and manage hydrocarbon production in petroleum *** deep learning technique has been receiving more interest due to the great potential to deal with pore pressure ***,most of the traditional deep learning models are less efficient to address generalization *** fill this technical gap,in this work,we developed a new adaptive physics-informed deep learning model with high generalization capability to predict pore pressure values directly from seismic ***,the new model,named CGP-NN,consists of a novel parametric features extraction approach(1DCPP),a stacked multilayer gated recurrent model(multilayer GRU),and an adaptive physics-informed loss *** machine training,the developed model can automatically select the optimal physical model to constrain the results for each pore pressure *** CGP-NN model has the best generalization when the physicsrelated metricλ=0.5.A hybrid approach combining Eaton and Bowers methods is also proposed to build machine-learnable labels for solving the problem of few *** validate the developed model and methodology,a case study on a complex reservoir in Tarim Basin was further performed to demonstrate the high accuracy on the pore pressure prediction of new wells along with the strong generalization *** adaptive physics-informed deep learning approach presented here has potential application in the prediction of pore pressures coupled with multiple genesis mechanisms using seismic data.

关键词： Pore pressure prediction Seismic data 1D convolution pyramid pooling Adaptive physics-informed loss function High generalization capability

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：