检索结果-南通市图书馆

Improving mechanical properties and high-temperature oxidation of press hardened steel by adding Cr and Si

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第8期31卷 1865-1875页

作者： Rong Zhu Yonggang Yang Baozhong Zhang Borui Zhang Lei Li Yanxin Wu Zhenli Mi National Engineering Research Center for Advanced Rolling and Intelligent Manufacturing University of Science and Technology BeijingBeijing 102206China Manufacturing Management Department Ningbo Iron&Steel Co.Ltd.Ningbo 315800China Hunan Valin Lianyuan iron and steel co. Ltd.Loudi 417009China

This work investigated the effect of Cr and Si on the mechanical properties and oxidation resistance of press hardened *** indicated that the microstructure of the Cr-Si micro-alloyed press hardened steel co.sisted of lath martensite,M_(23)C_(6)carbides,and retained *** retained austenite and carbides are responsible for the increase in elongation of the micro-alloyed *** addition,after oxidation at 930℃for 5 min,the thickness of the oxide scales on the Cr-Si micro-alloyed press hardened steel is less than 5μm,much thinner than 45.50μm-thick oxide scales on *** oxide scales of the Cr-Si micro-alloyed steel are co.posed of Fe_(2)O_(3),Fe_(3)O_(4),mixed spinel oxide(FeCr_(2)O_(4)and Fe_(2)SiO_(4)),and amorphous SiO_(2).Adding Cr and Si significantly reduces the thickness of the oxide scales and prevents the generation of the FeO *** to the increase of spinel FeCr_(2)O_(4)and Fe_(2)SiO_(4)phase in the inner oxide scale and the amorphous SiO_(2)close to the substrate,the oxidation resistance of the Cr-Si micro-alloyed press hardened steel is improved.

关键词： Cr-Si micro-alloyed press hardened steel mechanical properties oxidation resistance amorphous SiO_(2)

Effect of titanium on the sticking of pellets based on hydrogen metallurgy shaft furnace:Behavior analysis and mechanism evolution

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第2期31卷 282-291页

作者： Jinge Feng Jue Tang Zichuan Zhao Mansheng Chu Aijun Zheng Xiaobing Li Xiao’ai Wang School of Metallurgy Northeastern UniversityShenyang 110819China Institute for Frontier Technologies of Low-carbon steelmaking Northeastern UniversityShenyang 110819China Liaoning Low-carbon steelmaking Technology Engineering Research Center Northeastern UniversityShenyang 110819China Engineering Research Center of Frontier Technologies for Low-carbon steelmaking(Ministry of Education Shenyang 110819China Zhang Xuan Technology of HBIS Group co. Ltd.Shijiazhuang 050000China Xuanhua iron and steel Group co. Ltd.Shijiazhuang 050000China iron and steel Research Institute of HBIS Group co. Ltd.Shijiazhuang 050000China

Direct reduction based on hydrogen metallurgical gas-based shaft furnace is a promising technology for the efficient and low-carbon smelting of vanadium-titanium ***,in this process,the sticking of pellets occurs due to the aggregation of metal-lic iron between the co.tact surfaces of adjacent pellets and has a serious negative effect on the co.tinuous *** paper presents a detailed experimental study of the effect of TiO2 on the sticking behavior of pellets during direct reduction under different *** showed that the sticking index(SI)decreased linearly with the increasing TiO2 *** phenomenon can be attributed to the increase in unreduced FeTiO3 during reduction,leading to a decrease in the number and strength of metallic iron interco.nections at the sticking *** the TiO2 addition amount was raised from 0 to 15wt%at 1100°C,the SI also increased from 0.71%to 59.91%.The co.nection of the slag phase co.ld be attributed to the sticking at a low reduction temperature,co.responding to the low sticking ***,the interco.nection of metallic iron became the dominant factor,and the SI increased sharply with the increase in re-duction ***2 had a greater effect on SI at a high reduction temperature than at a low reduction temperature.

关键词： titanium sticking index hydrogen metallurgy direct reduction pellets

Solidification behaviour and hot cracking susceptibility of a novel Ni-based superalloy

在线全文

学校读者我要写书评

暂无评论

Journal of iron and steel Research International 2024年第4期31卷 956-966页

作者： Yue Chen Shao-min Lv Xing-fei Xie Xiao-can Wen Jng-long Qu Jin-hui Du High-Temperature Materials Institute China Iron and Steel Research Institute Group Co.Ltd.Beijing 100081China Beijing GAONA Materials and Technology co. Ltd.Beijing 100081China Sichuan CISRI-GAONA Forging co. Ltd.Deyang 610000SichuanChina

A novel Ni-based superalloy GH4151,with a γ′ volume fraction of about 55%and a service temperature capability up to 8oo oC,was *** to the different co.ling co.ditions of various regions during the solidification of ingots,significant co.ling rate variations may lead to the occurrence of hot *** scanning laser microsco.e was utilised to investigate the solidification process and phase precipitation behaviour of the GH4151 under wide range co.ling *** characteristics of L→γ transformation were analysed,and the growth rates of at each stage were *** segregation behaviour was predicted using the Scheil equation,and the predicted results match well with the experimental *** sensitivity co.fficient for hot cracking was modified,and cracking sensitivity co.fficient values for the alloy under different co.ling rates were co.puted,revealing that the alloy is most susceptible to hot cracking at 10℃/min co.ling ***,co.trolling the co.ling rate can reduce the possibility of hot cracking in ingot.

关键词： Ni-based superalloy Solidification behaviour In-situ observation Clyne and Davies's criterion:Hot cracking susceptibility

Effects of co.ling rate on microstructure and microhardness of directionally solidified Galvalume alloy

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

China Foundry 2024年第3期21卷 213-220页

作者： Ji-peng Li De-gao Qiao Jian Li Xiao-yang Luo Peng Peng Xian-tao Yan Xu-dong Zhang Gansu Jiu steel Group Hongxing iron and steel co. Ltd.Jiayuguan 735111GansuChina School of Materials and Energy Lanzhou UniversityLanzhou 730000China

The influences of co.ling rate on the phase co.stitution,microstructural length scale,and microhardness of directionally solidified Galvalume(Zn-55Al-1.6Si)alloy were investigated by directional solidification experiments at different withdrawal speeds(5,10,20,50,100,200,and 400μm·s^(-1)).The results show that the microstructure of directionally solidified Galvalume alloys is co.posed of primary Al dendrites,Si-rich phase and(Zn-Al-Si)ternary eutectics at the withdrawal speed ranging from 5 to 400μm·s^(-1).As the withdrawal speed increases,the segregation of Si element intensifies,resulting in an increase in the area fraction of the Si-rich *** addition,the primary Al dendrites show significant refinement with an increase in the withdrawal *** relationship between the primary dendrite arm spacing(λ_(1))and the thermal parameters of solidification is obtained:λ_(1)=127.3V^(-0.31).Moreover,as the withdrawal speed increases from 5 to 400μm·s^(-1),the microhardness of the alloy increases from 90 HV to 151 *** is a co.bined effect of grain refinement and seco.d-phase strengthening.

关键词： Galvalume alloy directional solidification microstructure length scale microhardness

Revealing effect of Al co.tent on oxidation of novel co.Cr-Nb-W carbide-strengthened superalloy

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第9期43卷 4521-4534页

作者： Chen Ling Shang-Ping Li Jie Hou He-Li Luo Central iron&steel Research Institute Beijing 100081China Beijing GAONA Materials&Technology co. Ltd.Beijing 100081China

The high-temperature oxidation behavior of novel co.Cr-Nb-W carbide-strengthened wear-resistance alloys with different Al co.tents(1wt%,2wt%and 3wt%)at 950,1000 and 1050℃was thoroughly investigated by scanning electron microsco.y,X-ray diffraction,X-ray photoelectron spectrosco.y and field emission electron probe *** porous property of NbC in-situ oxidation products(Nb_(2)O_(5),co.Nb_(2)O_(6)and co.(4)Nb_(2)O_(9))induces a multi-layered oxide scale with micropores and ***-Cr-Nb-W alloy with 1 wt%Al undergoes catastrophic oxidation and spalling above 1000℃.The outward transportation of Cr and co.is effectively restrained by a co.tinuous Al_(2)O_(3)scale formed around NbC in-situ oxidation region when Al co.tent reaches 3 wt%.The β-co.Al in co.Cr-Nb-W alloy with 3 wt%Al has an oxidation priority over eutectic carbides and the alloy matrix which are both enriched with Cr,thereby preventing the formation of Cr-depletion area and improving the self-healing ability of the oxide film.A slight change in Al co.tent has a remarkable influence on the co.perative effect of Al and Cr and multiplies the antioxidant capacity of co.Cr-Nb-W alloy above 1000℃.

关键词： High-temperature oxidation behavior Oxidation kinetics Superalloy Wear-resistant alloy Microstructure

Effect of Al co.tent on modification behavior of non-metallic inclusions in high-strength steel treated with rare earth

在线全文

学校读者我要写书评

暂无评论

Journal of iron and steel Research International 2024年第8期31卷 1886-1899页

作者： Zhan-peng Tie Xue-yuan Jiang Hai-yan Tang ·Gen Li Yu-hang Wang Jia-quan Zhang School of Metallurgical and Eco.ogical Engineering University of Science and Technology BeijingBeijing 100083China co.tinuous Casting Business Section CISDI Engineering Co.Ltd.Chongqing 401122China Special steel Institute Central Iron and Steel Research Institute Co.Ltd.Beijing 100081China

The influence of Al co.tent(0.0053,0.0171,and 0.0578 wt.%)on the modification behavior of non-metallic inclusions in 20CrMoVTiB steel treated with rare earth elements was studied through high-temperature experiments and thermodynamic *** results showed that the modification products varied with the Al co.tent in steel under 0.01 wt.%of Ce *** formation sequence of typical rare earth inclusions in steel with the increase in Al co.tent was Ce_(2)O_(3)→CeAlO_(3)→CeAl_(11)O_(18),and the final stable products were highly Al co.tent *** the Al co.tent was 0.0053 wt.%,the stable phase in steel was Ce2O3;while the[Al]reached 0.0171 wt.%,the stable phase became CeA1O_(3).As the A1 co.tent reached 0.0578 wt.%,CeAl_(11)O_(18) became the stable *** a result,increasing the Al co.tent co.ld inhibit the precipitation of Ce_(2)O_(3) inclusions in steel while promote the formation of CeAIO3 and CeAl_(11)O_(18) *** addition,both Ca treatment and Ce treatment co.ld effectively refine the size of inclusions in steel by changing their ***,the feeding amount of Ca wire into molten steel should be appropriately reduced under the co.dition of adding Ce simultaneously,which is expected to be beneficial for an improved Ce treatment effect.

关键词： Rare earth Al co.tent steel Inclusion Thermodynamics Ca treatment

The effects of deformation parameters and co.ling rates on the aging behavior of AZ80+0.4%Ce

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第2期12卷 639-658页

作者： Yongbiao Yang Jinxuan Guo Cuiying Wang Ting Yan Zhang Wenxuan Jiang Zhimin Zhang Qiang Wang Guojun Li Jun Wang co.lege of Materials Science and Engineering North University of ChinaLane 3Xueyuan RoadTaiyuanShanxiChina030051 State Key Laboratory of Advanced Stainless steel Materials Taiyuan Iron Steel(Group)Co.Ltd.Taiyuan 030003China Technology Center Shanxi Taigang Stainless Steel Co.Ltd.Taiyuan 030003China

The extruded AZ80+0.4%Ce magnesium alloy was twisted in the temperature range of 300-380℃by using a Gleeble 3500 thermal simulation test machine with a torsion *** deformed cylindrical specimens were co.led at a co.ling rate of 10℃/s or 0.1℃/s,respectively,and aged at 170℃.The microstructure analysis results showed that the grain size decreased with increasing specimen radial position from center(SRPC),and that the strong initial basal texture of the extruded magnesium alloy was *** co.tinuous and disco.tinuous dynamic recrystallization mechanisms were involved in co.tributing to the grain refinement for all specimens *** a novel extension twinning induced dynamic recrystallization mechanism was proposed for specimen deformed at 300℃.For the specimens deformed at 300℃and 340℃followed by a slow co.ling rate(0.1℃/s),precipitates of various shapes(β-Mg_(17)Al_(12)),with the dominant precipitates being on the grains boundaries,appeared on the surface *** specimen deformed at 380℃,lamellar precipitates(LPS)in the interiors of the grains were *** aging,the LPS still dominated for specimens twisted at 380℃;however,the LPS gradually decreased with decreasing deformation temperatures from 380℃to 300℃.Dynamically precipitatedβ,especially those deco.ating the grain boundaries,changed the co.petition pictures for the LPS and precipitates of other shapes after ***,LPS dominated the areas for the center section of the specimens after aging regardless of deformation *** temperature deformation with high SRPC followed by rapid co.ling rate increased the micro hardness of the alloy after aging due to refined grain,reduced precipitates size,decreased lamellar spacing as well as strain hardening.

关键词： AZ80+0.4%Ce magnesium alloy Hot torsion Deformation parameters co.ling rate Aging Micro hardness

Modeling of LF refining process:a review

在线全文

学校读者我要写书评

暂无评论

Journal of iron and steel Research International 2024年第2期31卷 289-317页

作者： Zi-cheng Xin Jiang-shan Zhang Kai-xiang Peng Jun-guo Zhang Chun-hui Zhang Qing Liu State Key Laboratory of Advanced Metallurgy University of Science and Technology BeijingBeijing100083China School of Automation and Electrical Engineering University of Science and Technology BeijingBeijing100083China Tangshan Branch Hebei Iron and Steel Co.Ltd.Tangshan063000HebeiChina Xinjiang Bayi iron and steel co. Ltd.Baosteel GroupWulumuqi830022XinjiangChina

With the increasing demand for energy co.servation and emission reduction,more attentions have been paid to the intelligentization,greenization and low carbonization during the transformation and upgrading of steelmaking *** furnace(LF)refining is one of the key procedures in steelmaking process and has been widely used in steelmaking plants for its high equipment matching degree,low equipment investment and outstanding refining *** to the main tasks of LF refining process,the modeling methods of temperature prediction model,slag-making model,alloying model,argon blowing model and model of inclusions behavior were systematically reviewed,and the advantages and disadvantages of each modeling method were *** addition,the technical framework for the future has also been proposed based on existing works,including classification of raw materials,graphic representation of knowledge,introduction,upgradation and management of device/equipment,customization of steelmaking,modeling of refining process,synergy of models,intelligentization of decision-making,automation of co.trol,and digitization of processes and operations,aiming to provide a reference for the modeling and intelligent development of LF refining process.

关键词： LF refining Temperature prediction Slag-making Alloying Argon blowing Inclusion behavior Modeling method

High cerium co.tent(Nd-Pr-Ce)_(2)Fe_(14)B melt-spun ribbons with high co.rcivity

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第4期42卷 690-695页

作者： Yujiang Zhong Junming Wang Zikai Yuan Ruijin Liu Minggang Zhu Zhe Liu Xin Chen Wei Li Zhaohui Guo Division of Functional Materials Central Iron and Steel Research InstituteBeijing100081China Ningbo Jinji Strong Magnetic Material co. Ltd.Ningbo315172China Jiangxi Jiangwu Rare Metal New Material co. Ltd.Nanchang330013China

The effects of wheel speeds on the magnetic properties and microstructures of[(Nd,Pr)_(1-x)Ce_(x)]-Fe-B meltspun ribbons were *** to melt-spun ribbons with low cerium(Ce)co.tent(x=0.2),amorphous formation can be suppressed at high wheel speed in the ribbons with a relatively high Ce co.tent(x=0.8),and with the increase of the wheel speed,the magnetic properties of the ribbons with high Ce co.tent raise *** high wheel speed,the co.rcivity mechanism of melt-spun ribbons is mainly pinning field,and the high wheel speed introduces a large number of defects into the matrix as pinning ***,ribbons with high Ce co.tent form a fine and uniform grain structure,so the grain boundary area enlarges,which further hinders the movement of domain *** co.bined effects of the above factors enable ribbons with high Ce co.tent to have excellent magnetic properties(Hcj=0.977 T,Mr=64 m^(2) A/kg)at the wheel speed of 35 m/s.

关键词： Wheel speed Ceco.tent Microstructure Magnetic properties Rare earths