检索结果-南通市图书馆

Optimized air-ground data fusion method for mine slope modeling

在线全文

学校读者我要写书评

暂无评论

Journal of Mountain Science 2024年第6期21卷 2130-2139页

作者： LIU Dan HUANG Man TAO Zhigang HONG Chenjie WU Yuewei FAN En YANG Fei State Key Laboratory for Tunnel Engineering China University of Mining and Technology(Beijing)Beijing 100083China Department of Civil Engineering Shaoxing UniversityShaoxing 312000China Department of Computer Science and Engineering Shaoxing UniversityShaoxing 312000China

Refined 3D modeling of mine slopes is pivotal for precise prediction of geological *** at the inadequacy of existing single modeling methods in comprehensively representing the overall and localized characteristics of mining slopes,this study introduces a new method that fuses model data from Unmanned aerial vehicles(UAV)tilt photogrammetry and 3D laser scanning through a data alignment algorithm based on control ***,the mini batch K-Medoids algorithm is utilized to cluster the point cloud data from ground 3D laser ***,the elbow rule is applied to determine the optimal cluster number(K0),and the feature points are ***,the nearest neighbor point algorithm is employed to match the feature points obtained from UAV tilt photogrammetry,and the internal point coordinates are adjusted through the distanceweighted average to construct a 3D ***,by integrating an engineering case study,the K0 value is determined to be 8,with a matching accuracy between the two model datasets ranging from 0.0669 to 1.0373 ***,compared with the modeling method utilizing K-medoids clustering algorithm,the new modeling method significantly enhances the computational efficiency,the accuracy of selecting the optimal number of feature points in 3D laser scanning,and the precision of the 3D model derived from UAV tilt *** method provides a research foundation for constructing mine slope model.

关键词： Air-ground data fusion method Mini batch K-Medoids algorithm Ebow rule Optimal cluster number 3D laser scanning UAV tilt photogrammetry

Optimizing profile line interval for enhanced accuracy in rock joint morphology and shear strength assessments

在线全文

学校读者我要写书评

暂无评论

International Journal of Mining Science and technology 2024年第5期34卷 587-608页

作者： Leibo Song Quan Jiang Shigui Du Jiamin Song Gang Wang Yanting Gu Xingkai Wang Jinzhong Wu School of Civil Engineering Shaoxing UniversityShaoxing 312000China Key Laboratory of Rock Mechanics and Geohazards of Zhejiang Province Shaoxing UniversityShaoxing 312000China State Key Laboratory of Geomechanics and Geotechnical Engineering Institute of Rock and Soil MechanicsChinese Academy of SciencesWuhan 430071China institute of Rock Mechanics Ningbo UniversityNingbo 315211China

2D profile lines play a critical role in cost-effectively evaluating rock joint properties and shear ***, the interval(ΔI_(L)) between these lines significantly impacts roughness and shear strength assessments. A detailed study of 45 joint samples using four statistical measures across 500 different ΔI_(L)values identified a clear line interval effect with two stages: stable and *** statistical analysis showed a linear relationship between the error bounds of four parameters,shear strength evaluation, and their corresponding maximum ΔI_(L)values, where the gradient k of this linear relationship was influenced by the basic friction angle and normal stress. Accounting for these factors,lower-limit linear models were employed to determine the optimal ΔI_(L)values that met error tolerances(1%–10%) for all metrics and shear strength. The study also explored the consistent size effect on joints regardless of ΔI_(L)changes, revealing three types of size effects based on morphological ***, larger joints required generally higher ΔI_(L)to maintain the predefined error limits, suggesting an increased interval for large joint analyses. Consequently, this research provides a basis for determining the optimal ΔI_(L), improving accuracy in 2D profile line assessments of joint characteristics.

关键词： Rock joint Roughness Shear strength Size effect Profile line interval effect

Quality assessment of friction-stir-welded aluminum alloy welds via three-dimensional force signals

在线全文

学校读者我要写书评

暂无评论

Advances in Manufacturing 2024年第1期12卷 61-75页

作者： Ji-Hong Dong Yi-Ming Huang Jia-Lei Zhu Wei Guan Xu-Kai Ren Huan-Wei Yu Lei Cui Beijing institute of Petrochemical technology Beijing102617People’s Republic of China Beijing Academy of Safety Engineering and technology Beijing102617People’s Republic of China AVIC Manufacturing technology institute Beijing100024People’s Republic of China Tianjin Key Laboratory of Advanced Joining technology School of Materials Science and EngineeringTianjin UniversityTianjin300350People’s Republic of China shaoxing Special Equipment Testing institute Shaoxing Key Laboratory of Special Equipment Intelligent Testing and EvaluationShaoxing312071ZhejiangPeople’s Republic of China

An online detection technology must be developed for realizing the real-time control of friction stir *** this study,the three-dimensional force exerted on a material during friction stir welding was collected synchronously and the relationship between the forces and welding quality was *** results indicated that the fluctuation period of the traverse force was equal to that of the lateral force during the stable welding *** phase difference between two horizontal forces wasπ/*** values of the horizontal forces increased with welding speed,whereas their amplitudes remained the *** proposed force model showed that the traverse and lateral forces conformed to an elliptical curve,and this result was consistent with the behavior of the measured *** variational mode decomposition was used to process the plunge *** intrinsic mode function that represented the real fluctuation in the plunge force varied at the same frequency as the spindle rotational *** tunnel defects occurred,the fluctuation period features were consistent with those obtained during normal welding,whereas the ratio parameter defined in this study increased significantly.

关键词： Friction stir welding(FSW) Three-dimensional force model Variational mode decomposition Tunnel defect

Heteroepitaxial growth of Au@Pd core–shell nanocrystals with intrinsic chiral surfaces for enantiomeric recognition

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第1期43卷 225-235页

作者： Feng-Xia Wu Feng-Hua Li Xia-Li Lv Qi-Xian Zhang Guo-Bao Xu Wen-Xin Niu State Key Laboratory of Electroanalytical Chemistry Changchun Institute of Applied ChemistryChinese Academy of SciencesChangchun 130022China shaoxing institute of technology Shanghai UniversityShaoxing 312000China University of Science and technology of China Hefei 230026China School of Materials Science and Engineering Shanghai UniversityShanghai 200436China Zhejiang institute of Advanced Materials Shanghai UniversityJiashan 314113China University of Chinese Academy of Sciences Beijing 100039China

Noble metal surfaces with intrinsic chirality serve as an ideal candidate for investigating enantioselective chemistry due to their superior chemical durability and high catalytic ***,significant advance has been made in synthesizing metal nanocrystals with intrinsic ***,the majority reports are limited to ***,through a heteroepitaxial growth strategy,the synthesis of metal nanocrystals with intrinsic chirality to palladium was extended for the first time and their application in enantioselective recognition was *** heteroepitaxial growth strategy allows for transferring the chirality of homochiral Au nanocrystals to Au@Pd core–shell *** employing the chiral Au@Pd nanocrystals as enantiomeric recognizing elements,a series of electrochemical sensors for chiral discrimination were *** optimal conditions,the peak potential between D-dihydroxyphenylalanine(D-DOPA)and L-dihydroxyphenylalanine(L-DOPA)is about 80 m V,and the peak current of D-DOPA is 2 times as much as that of L-DOPA,which enables the determination of the enantiomeric excess(EE,%)of ***,this report not only introduces a heteroepitaxial growth strategy to synthesize metal nanocrystals with intrinsic chirality,but also demonstrates the superior capability of integrating intrinsic chirality and catalytic properties into metal nanocrystals for chiral recognition.

关键词： Core–shell nanostructures Chirality transfer Electrochemical sensors Chiral recognition Chiroplasmonics

Inhibition of proliferation,migration,and invasiveness of bladder cancer cells through SAPCD2 knockdown

在线全文

学校读者我要写书评

暂无评论

BIOCELL 2024年第1期48卷 97-109页

作者： CHONG SHEN JIAJUN YAN YU REN ZHIRONG ZHU XIAOLONG ZHANG SHUIXIANG TAO Department of Urology Shaoxing People’s HospitalShaoxing HospitalZhejiang University School of MedicineShaoxingChina

Introduction:Bladder cancer(BC)has a high incidence and mortality rate *** anaphasepromoting complex domain containing 2(SAPCDC2)is over-expressed in a variety of ***:This study investigated the effects of SAPCD2 knockdown on BC ***:T24 and UMUC3 cell models and the xenografted BC tumor model with SAPCD2 knockdown were established to observe the malignant phenotype of BC cells by cell counting kit-8 assay,colony formation test,wound healing,and Transwell assay,mRNA and proteins expressions were measured with quantitative real-time polymerase chain reaction,western blotting,and tissue *** chloride agonist on the Wnt/β-catenin pathway was used to clarify the molecular mechanism of SAPCD2 ***:SAPCD2 expression was significantly higher in BC cell lines than in SVHUC-1 ***2 knockdown inhibited viability and cloning,hindered the G0/G1 phase of the cell cycle in UMUC3 and T24 cells,and decreased the migration and invasiveness of BC ***2 knockdown inhibited expression levels of cyclin D1,cyclin B1,N-cadherin,vimentin,Snail,β-catenin,c-Myc,and cyclin-dependent kinase 4,while the P21 and E-cadherin were raised by SAPCD2 ***,lithium chloride reversed the effects of SAPCD2 knockdown on the expression levels of the above proteins in UMUC3 and T24 *** vivo,SAPCD2 knockdown inhibited the volume,weight,and expression of Ki-67 andβ-catenin in tumors and increased the E-cadherin ***:SAPCD2 knockdown inhibits the malignant phenotype of BC via a pathway involvingβ-catenin.

关键词： Bladder cancer SAPCD2 β-catenin c-Myc CDK4 Lithium chloride

Influence of stearic acid surface modification on flowability and agglomeration of battery grade Li_(2)CO_(3)powder

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Particuology 2024年第9期92卷 263-277页

作者： Ming Zhou Lithium Industry Center Zhejiang New Era Zhongneng Technology Co.Ltd.Shaoxing312000China

This work investigates the flow and agglomeration behaviors of battery grade Li_(2)CO_(3)powder and the influence of stearic acid surface *** degree of agglomeration is directly related to the uniformity of Li_(2)CO_(3)and its powder *** to the Chinese National Nonferrous Metal Industry Standard,battery grade Li_(2)CO_(3)powder has D50 equal to 3–8μm which belongs to a micron-sized superfine ***,with the extension of storage time,the serious agglomeration phenomenon occurs due to the large specific surface area and rough and irregular powder *** Hausner ratio(HR)of the unmodified sample increases from 1.14 to 1.41,and the corresponding flowability is classified as good to ***,among samples with doping stearic acid,the optimum amount of it is 0.10 wt%which exhibits an extremely stable HR value from 1.14 to ***,after 156 days,the repose angle(AR)obtained for samples without surface modification and using 0.10 wt%stearic acid are calculated to be 49°and 28°,*** on the values of HR and AR,the flowability of the unmodified sample is poor while the sample modified with 0.10 wt%of stearic acid still maintain excellent powder flow ***,The LiMn_(2)O_(4)cathode material synthesized from modified Li_(2)CO_(3)powder with a stearic acid content of 0.10 wt%exhibits good crystallinity and comparable electrochemical performance to that prepared by commercial Li_(2)CO_(3).These results indicate that stearic acid has the potential to be an ideal modifier for battery grade Li_(2)CO_(3)powder that needs to be kept for a long time.

关键词： Battery grade Li_(2)CO_(3)powder Flowability Surface modification Stearic acid

Chalcogen-dependent catalytic properties of RuX2 (X = S/Se/Te) nanoparticles decorated carbon nanofibers for hydrogen evolution in acidic and alkaline media

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第4期17卷 2528-2537页

作者： Chengkai He Yue Wei Jia Xu Yujie Wei Tao Wang Rongfei Liu Lvlv Ji Zhun Liu Sheng Wang School of Materials Science and Engineering Zhejiang Sci-Tech UniversityHangzhou 310018China Department of Physics Shaoxing UniversityShaoxing 312000China Zhejiang Kangjiesi New Material technology Co. LTDZhuji 311800China

Transition metal dichalcogenides(TMDs),with the general formula MX_(2)(M=Mo/W/Fe/Co/Ni,etc.;X=S/Se/Te),have attracted extensive research interests for hydrogen evolution reaction(HER).Compared with numerous studies on noble-metal-free TMDs,the chalcogen-dependent HER catalytic properties of noble-metal-based TMDs are lack of sufficient research ***,a facile electrospinning-assisted synthetic strategy is proposed to synthesize ruthenium dichalcogenides(RuX_(2),X=S/Se/Te)nanoparticles decorated carbon nanofibers(CNFs).Benefiting from the identical nanofibrous morphology and exposed crystal planes of RuX_(2)(111),the catalytic activities of RuX_(2)@CNFs samples were investigated and compared in a fair and direct *** electrochemical measurements coupled with density functional theory calculations were carried out to probe their intrinsic HER catalytic activities,resulting in the catalytic activity order of RuS_(2)@CNFs>RuSe_(2)@CNFs>RuTe_(2)@CNFs in acidic media and that of RuS_(2)@CNFs>RuTe_(2)@CNFs>RuSe_(2)@CNFs in alkaline *** superior catalytic performance of RuS_(2)@CNFs mainly stems from the relative lower HER energy barriers and thereby the higher intrinsic catalytic activity of RuS_(2)(111),leading to ultralow overpotentials of 44 and 9 mV at 10 mA·cm^(-2) in acidic and alkaline media,***_(2)(111)is endowed with the more optimized Gibbs free energy of hydrogen adsorption(ΔGH*)than RuTe_(2)(111),but RuTe_(2)(111)shows enhanced catalytic property for H_(2)O dissociation and OH-desorption than RuSe_(2)(111),therefore,resulting in the altered catalytic activity sequences for RuSe_(2) and RuTe_(2) in acidic and alkaline media.

关键词： hydrogen evolution reaction transition metal dichalcogenides carbon nanofibers electrocatalysis catalytic activity

Controllable synthesis of one-dimensional silicon nanostructures based on the dual effects of electro-deoxidation and the Kirkendall effect

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第9期17卷 7814-7823页

作者： Jianxin Tu Shuo Yu Kui Hao Le Sun Ruicheng Bai Fangzhou Zhang Aijun Li Hong Liu institute of Materials School of Materials Science and EngineeringShanghai UniversityShanghai 200444China Department of Applied Physics The Hong Kong Polytechnic UniversityKowloon 999077Hong KongChina shaoxing institute of technology Shanghai UniversityShanghai 200444China

In this study,we successfully synthesized silicon nanotubes(Si-NTs)and silicon nanowires(Si-NWs)in a controllable manner using a catalyst-and template-free method through the direct electrolysis of SiO_(2)in a molten CaCl_(2)-CaO system,while also proposing a novel formation mechanism for ***-NWs are formed through electro-deoxidation when the cell voltage is within the range of CaO decomposition voltage and SiO_(2)decomposition *** subsequently adjusting the voltage to a value between the decomposition potentials of CaCl_(2)and CaO,in-situ electro-deoxidation of CaO takes place on the surface of the synthesized Si-NWs,leading to the formation of a Ca *** formation of Ca-Si diffusion couple leads to the creation of vacancies within the Si-NWs,as the outward diffusion rate of Si exceeds the inward diffusion rate of *** differential diffusion rates between Si and Ca in a diffusion couple exhibit an analogy to the Kirkendall *** vacancies gradually accumulate and merge,forming large voids,which ultimately result in the formation of hollow *** a subsequent dealloying process,the removal of the embedded calcium leads to the formation of *** the application of a carbon coating,the Si-NTs@C composite showcases a high initial discharge capacity of 3211 mAh·g^(-1)at 1.5 A·g^(-1)and exhibits exceptional long-term cycling stability,maintaining a capacity of 977 mAh·g^(-1)after 2000 cycles at 3.0 A·g^(-1).

关键词： silicon nanotubes silicon nanowires lithium-ion battery Kirkendall effect

Coupled CFD-DEM Numerical Simulation of the Interaction of a Flow-Transported Rag with a Solid Cylinder

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Fluid Dynamics & Materials Processing 2024年第7期20卷 1593-1609页

作者： Yun Ren Lianzheng Zhao Xiaofan Mo Shuihua Zheng Youdong Yang Zhijiang College Zhejiang University of TechnologyShaoxing312030China College of Mechanical Engineering Zhejiang University of TechnologyHangzhou310032China

A coupled Computational Fluid Dynamics-Discrete Element Method(CFD-DEM)approach is used to calculate the interaction of a flexible rag transported by a fluid current with a fixed solid *** specifically a hybrid Eulerian-Lagrangian approach is used with the rag being modeled as a set of interconnected *** influence of various parameters is considered,namely the inlet velocity(1.5,2.0,and 2.5 m/s,respectively),the angle formed by the initially straight rag with the flow direction(45°,60°and 90°,respectively),and the inlet position(90,100,and 110 mm,respectively).The results show that the flow rate has a significant impact on the permeability of the *** higher the flow rate,the higher the permeability and the rag speed *** angle has a minor effect on rag permeability,with 45°being the most favorable angle for *** inlet position has a small impact on rag permeability,while reducing the initial distance between the rag an the cylinder makes it easier for rags to pass through.

关键词： Rag flow around cylinder flow characteristics numerical simulation