检索结果-南通市图书馆

Journal of Materials science & Technology 2024年第5期172卷 202-212页

作者： Fei Huang Jiyong Hu Xiong Yan shanghai Frontier science research center for Modern Textiles Donghua UniversityShanghai 201620China

Yarn-based flexible strain sensors with advantages in wearability and integrability have attracted wide ***,it is still a big challenge to achieve yarn-based strain sensors with a wide linear strain range,low hysteresis,and durability synchronously that can be used for full range detection of human body ***,a new structure,double-threaded conductive yarn with rhythmic strain distribu-tion,is reported to markedly widen the linear strain range of microcrack-based stretchable strain sensors.A new method of winding and thermally adhering hot-melt filaments on the surface of the elastic fiber is used to achieve double-threaded yarn(DTY)with rhythmic strain *** proposed strategy,the integration of heterogeneous materials,is reported to significantly reduce the mechanical hysteresis of composite *** strain distribution of the DTY during stretching causes multi-level micro-cracks in different regions of the carbon nanotube(CNT)conductive layer deposited on the surface of the ***,the sensing performance of DTY-based strain sensor can be adjusted by designing the structural *** final prepared flexible strain sensor has the advantages of a wide linear strain range(100%),great sensitivity(GF=12.43),low hysteresis,rapid response(158 ms),high repeatability(>2000 cycles at 50%strain),and hydrophobicity,*** sensor can monitor human motion repeatedly and stably well,and shows great advantages in flexible wearable devices.

关键词： Double-threaded yarn Strain redistribution Hysteresis Human motion monitoring

Influence of syngas components and ash particles on the radiative heat transfer in a radiant syngas cooler

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第4期68卷 203-215页

作者： Chen Han Youmin Situ Huaxing Zhu Jianliang Xu Zhenghua Dai Guangsuo Yu Haifeng Liu National Energy Coal Gasification Technology research and Development center East China University of Science and TechnologyShanghai 200237China shanghai Engineering research center of Coal Gasification East China University of Science and TechnologyShanghai 200237China

Radiant syngas cooler(RSC)is widely used as a waste heat recovery equipment in industrial *** this work,an RSC with radiation screens is established and the impact of gaseous radiative property models,gas components,and ash particles on heat transfer is investigated by the numerical simulation *** the syngas components and the pressure environment of the RSC,a modified weighted-sum-of-gray-gases model was *** modified model shows high accuracy in *** computational fluid dynamics simulation,the calculated steam production is only 0.63%in error with the industrial *** with Smith's model,the temperature decay along the axial direction calculated by the modified model is *** components are of great significance to heat recovery capacity,especially when the absorbing gas fraction is less than 10%.After considering the influence of particles,the outlet temperature and the proportion of radiative heat transfer are less affected,but the difference in steam output reaches 2.7 t·h^(-1).The particle deposition on the wall greatly reduces the heat recovery performance of an RSC.

关键词： Radiant syngas cooler Weighted-sum-of-gray-gases model Numerical simulation Particle radiation

Lactobacillus plantarum AR495 improves stress-induced irritable bowel syndrome in rats by targeting gut microbiota and Mast cell-PAR2-TRPV1 signaling pathway

在线全文

学校读者我要写书评

暂无评论

Food science and Human Wellness 2024年第2期13卷 698-708页

作者： Hongyun Zhang Guangqiang Wang Zhiqiang Xiong Zhuan Liao Yangyan Qian Xin Song Li Sui Lianzhong Ai Yongjun Xia shanghai Engineering research center of Food Microbiology School of Health Science and EngineeringUniversity of Shanghai for Science and TechnologyShanghai 200093China Department of Gastroenterol Digestive Endoscopy CenterShanghai HospitalShanghai 200093China

Probiotics have great potential in regulating intestinal *** this study,the effects of Lactobacillus plantarum AR495 on the visceral sensitivity and gut microbiota of irritable bowel syndrome(IBS)rats were *** results showed that tryptase released after mast cell activation and degranulation plays a key role in visceral pain,and *** AR495 reduced the stimulation of colonic mast cells and the expression of protease-activated receptor 2(PAR2)and TRPV1 in dorsal root *** further showed that supplementation with *** AR495 increased the level of short-chain fatty acids(SCFAs)and enhanced the barrier function of the *** addition,the microbiota analysis of the colon indicated that *** AR495 promoted the proliferation of Bifidobacterium and inhibited the proliferation of Lachnospiraceae,which alleviated the imbalance of the intestinal microbiota caused by IBS to a certain *** total,*** AR495 might reduce visceral sensitivity through the Mast cell-PAR2-TRPV1 signaling pathway by maintaining the homeostasis of the intestinal barrier.

关键词： Lactobacillus plantarum Irritable bowel syndrome Visceral sensitivity Dorsal root ganglia Tryptase Microbiota

3D nano-printed geometric phase metasurfaces for generating accelerating beams with complex amplitude manipulation

在线全文

学校读者我要写书评

暂无评论

science China(Physics,Mechanics & Astronomy) 2024年第6期67卷 86-95页

作者： Tianchen Tang Saima Kanwal Yongzheng Lu Yuelong Li Shuangbao Wu Lei Chen Ziheng Qian Zhouyu Xie Jing Wen Dawei Zhang research center of Optical Instrument and System Ministry of Education and Shanghai Key Lab of Modern Optical SystemUniversity of Shanghai for Science and TechnologyShanghai 200093China

Metasurface,a forefront in emerging optical devices,has demonstrated remarkable potential for complex amplitude manipulation of light ***,prevailing approaches face challenges in spatial resolution and complexities associated with integrating dynamic phases,impeding the simplified design and reproducible fabrication of ***,we introduce an innovative approach for complex amplitude modulation within 3D nano-printed geometric phase *** approach enables the generation of self-accelerating beams by encoding amplitude through phase-only manipulation,achieving high spatial ***,this method circumvents the conventional need to adjust the geometric parameters of metasurface unit structures for amplitude manipulation,offering a streamlined and efficient route for design and fabrication *** novel methodology holds promise for expedited and low-cost manufacturing of complex amplitude manipulation metasurfaces.

关键词： metasurface complex amplitude manipulation geometric phase 3D nano-printing Airy beam accelerating parabolic beam

同方期刊数据库

Diphylleia Grayi-Inspired Intelligent Temperature-Responsive Transparent Nanofiber Membranes

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第4期16卷 67-78页

作者： Cengceng Zhao Gaohui Liu Yanyan Lin Xueqin Li Na Meng Xianfeng Wang Shaoju Fu Jianyong Yu Bin Ding shanghai Frontier science research center of Advanced Textiles College of TextilesDonghua UniversityShanghai 201620People’s Republic of China

Nanofiber membranes(NFMs) have become attractive candidates for next-generation flexible transparent materials due to their exceptional flexibility and breathability. However, improving the transmittance of NFMs is a great challenge due to the enormous reflection and incredibly poor transmission generated by the nanofiber-air interface. In this research, we report a general strategy for the preparation of flexible temperature-responsive transparent(TRT) membranes,which achieves a rapid transformation of NFMs from opaque to highly transparent under a narrow temperature window. In this process, the phase change material eicosane is coated on the surface of the polyurethane nanofibers by electrospray technology. When the temperature rises to 37 ℃, eicosane rapidly completes the phase transition and establishes the light transmission path between the nanofibers, preventing light loss from reflection at the nanofiber-air interface. The resulting TRT membrane exhibits high transmittance(> 90%), and fast response(5 s). This study achieves the first TRT transition of NFMs, offering a general strategy for building highly transparent nanofiber materials, shaping the future of next-generation intelligent temperature monitoring, anti-counterfeiting measures, and other high-performance devices.

关键词： Biomimetic Transparent Nanofibrous membrane Temperature response Phase change materials

A multifunctional electrolyte additive for zinc-ion capacitors with low temperature resistant and long lifespan

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第7期94卷 477-485页

作者： Ming Sun Zekai Zhang Shuqing Fu Yifan Zhang Ruoyu Wang Hongchun Mu Cheng Lian Wenqiang Wang Gengchao Wang shanghai Engineering research center of Hierarchical Nanomaterials Shanghai Key Laboratory of Advanced Polymeric MaterialsSchool of Materials Science and EngineeringEast China University of Science and TechnologyShanghai 200237China State Key Laboratory of Chemical Engineering Shanghai Engineering Research Center of Hierarchical NanomaterialsFrontiers Science Center for Materiobiology and Dynamic Chemistryand School of Chemistry and Molecular EngineeringEast China University of Science and TechnologyShanghai 200237China State Key Laboratory of Molecular Engineering of Polymers Department of Macromolecular ScienceFudan UniversityShanghai 200438China

Aqueous zinc-ion capacitors (ZICs) are considered as potential candidates for next generation electrochemical energy storage devices due to their high safety and low ***,the existing aqueous ZICs usually have the problems of zinc dendrite growth and unsatisfactory performance at low ***,an erythritol (Eryt) additive with inhibition of zinc dendrites and anti-freezing capability was introduced into the *** experimental characterization and theoretical calculation confirm that the Eryt adsorbed on the surface of zinc anodes regulates the deposition orientation of Zn^(2+) and inhibits the formation of *** also reconstructs the solvation structure in the electrolyte to reduce water activity,enabling the electrolyte to have a lower freezing point for operation at low *** the assistance of Eryt,the Zn||Zn symmetric cell exhibits a long cycle life of 2000 h,while the ZIC assembled with activated carbon (AC) cathode and zinc anode (Zn||AC) maintains a capacity retention of 98.2% after 30,000 cycles at a current density of 10 A g^(-1)(even after 10,000 cycles at-20°C,the capacity retention rate reached 94.8%.).This work provides a highly scalable,low-cost and effective strategy for the protection of the anodes of low-temperature aqueous ZICs.

关键词： Zinc-ioncapacitors Electrolyte additive Dendrite-free Freeze-resistant electrolyte

Buckling Properties of Water-Drop-Shaped Pressure Hulls with Various Shape Indices Under Hydrostatic External Pressure

在线全文

学校读者我要写书评

暂无评论

China Ocean Engineering 2024年第1期38卷 1-17页

作者： DING Xiao-de ZHANG Jian WANG Fang JIAO Hui-feng WANG Ming-lu School of Mechanical Engineering Jiangsu University of Science and TechnologyZhenjiang 212003China shanghai Engineering research center of Marine Renewable Energy College of Engineering Science and Technol-ogyShanghai Ocean UniversityShanghai 201306China China Ship Scientific research center Wuxi 214082China

The water-drop-shaped pressure hull has a good streamline,which has good application prospect in the underwater ***,this study conducted analytical,experimental and numerical investigation of the buckling properties of water-drop-shaped pressure hulls under hydrostatic pressure.A water-drop experiment was conducted to design water-drop-shaped pressure hulls with various shape *** critical loads for the water-drop-shaped pressure hulls were resolved by using Mushtari’s *** numerical simulations including linear buckling analysis and nonlinear buckling analysis including eigenmode imperfections were *** results indicated that the critical loads resolved by Mushtari's formula were in good agreement with the linear buckling loads from the numerical *** formula can be extended to estimate the buckling capacity of water-drop-shaped pressure *** addition,three groups of pressure hulls were fabricated by using stereolithography,a rapid prototyping ***,three groups of the pressure hulls were subjected to ultrasonic measurements,optical scanning,hydrostatic testing and numerical *** experimental results were consistent with the numerical *** results indicate that the sharp end of the water-drop-shaped pressure hulls exhibited instability compared with the blunt *** paper provides a new solution to the limitations of experimental studies on the water-drop-shaped pressure hulls as well as a new configuration and evaluation method for underwater observatories.

关键词： buckling pressure hull water drop underwater observatory

Synchronous deprotonation–protonation for mechanically robust chitin/aramid nanofibers conductive aerogel with excellent pressure sensing, thermal management, and electromagnetic interference shielding

在线全文

学校读者我要写书评

暂无评论

Nano research 2024年第3期17卷 2038-2049页

作者： Xinxin Zhang Kunpeng Qian Jianhui Fang Sineenat Thaiboonrod Miao Miao Xin Feng Department of Chemistry College of SciencesShanghai UniversityShanghai 200444China research center of Nano science and Technology College of SciencesShanghai UniversityShanghai 200444China School of Materials sciences and Engineering Shanghai UniversityShanghai 200444China National Nanotechnology center(NANOTEC) National Science and Technology Development Agency(NSTDA)Thailand Science ParkPathum Thani 12120Thailand

Aerogels with regularly porous structure and uniformly distributed conductive networks have received extensive attention in wearable electronic sensors,electromagnetic shielding,and so ***,the poor mechanical properties of the emerging nanofibers-based aerogels are limited in practical *** this work,we developed a synchronous deprotonation–protonation method in the KOH/dimethyl sulfoxide(DMSO)system at room temperature for achieving chitin cross-linked aramid nanofibers(CANFs)rather than chitin nanofibers(ChNFs)and aramid nanofibers(ANFs)separately by using chitin and aramid pulp as raw *** freeze-drying process,the cross-linked chitin/aramid nanofibers(CA)aerogel exhibited the synergetic properties of ChNF and ANF by the dual-nanofiber compensation *** mechanical stress of CA aerogel was 170 kPa at 80%compressive strain,increased by 750%compared with pure ChNF ***,the compressibility of CA aerogel was somewhat improved compared to ANF *** enhancement verified that the crosslinking reaction between ANF and ChNF during the synchronous deprotonation process was ***,the conductive aerogels with uniform porous structure(CA-M)were successfully obtained by vacuum impregnating CA aerogels in Ti_(3)C_(2)T_(x) MXene solution,displaying low thermal conductivity(0.01 W/(m·K)),high electromagnetic interference(EMI)shielding effectiveness(SE)(75 dB),flame retardant,and heat ***,the as-obtained CA-M aerogels were also applied as a pressure sensor with excellent compression cycle stability and superior human motion monitoring *** a result,the dual-nanofiber based conductive aerogels have great potentials in flexible/wearable electronics,EMI shielding,flame retardant,and heat insulation.

关键词： synchronous deprotonation–protonation electromagnetic interference(EMI)shielding flame retardant heat insulation pressure sensing

Advances of high-performance LiNi_(1-x-y)Co_(x)M_(y)O_(2) cathode materials and their precursor particles via co-precipitation process

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Particuology 2024年第3期86卷 67-85页

作者： Wenbiao Liang Yin Zhao Liyi Shi Zhuyi Wang Yi Wang Meihong Zhang Shuai Yuan School of Materials science and Engineering Shanghai UniversityShanghai200444China research center of Nanoscience and Nanotechnology Shanghai UniversityShanghai200444China Emerging Industries Institute Shanghai UniversityJiaxingZhejiang314006China

Layered LiNi_(1-x-y)Co_(x)M_(y)O_(2)(M=Mn or Al)is a promising cathode material for lithium-ion batteries due to its high specific capacity and acceptable manufacturing ***,the polycrystalline LiNi_(1-x-y)Co_(x)M_(y)O_(2) cathode material suffers from disordered orientation of primary particles and poor geometric symmetry of secondary particles,which severely hampers the migration of Lit ***,the resulting anisotropy accelerates the disintegration of the secondary particle structure,significantly affecting the electrochemical performance of the polycrystalline *** spite of less grain boundary,the single-crystal LiNi_(1-x-y)Co_(x)M_(y)O_(2) cathodes still suffer from severe microcracks generated by repeated planar gliding during cycling,which poses a great challenge to the cycling stability of single-crystal ***'s worth noting that the microstructure of the cathode material is mainly inherited from its ***,it is necessary to deeply understand the influence of the microstructure of Ni_(1-x-y)Co_(x)M_(y)(OH)2 on the electrochemical properties of LiNi_(1-x-y)Co_(x)M_(y)O_(2) cathode materials,so as to optimize the production process of preparing high-performance cathode *** this review,we summarize recent advances in the research and development of Ni-rich cathode precursor ***,the challenges faced by the Ni-rich hydroxide precursor materials are presented,including the effect of primary particle morphology and arrangement on the electrochemical performance of cathode materials,the influence of secondary particle morphology on lithium insertion reactions in cathode,and the effect of particle size on the microcracking of single-crystal ***,the presentation of the conventional co-precipitation reactor,the mechanism of precursor particle growth,and the influence of coprecipitation parameters are described in ***,the strategies are systematically discussed to solve the cha

关键词： Lithium-ion batteries Cathode materials Co-precipitation Ni-rich layered oxides Single crystal Precursor particles

A vertical track nonlinear energy sink

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第6期45卷 931-946页

作者： Meng LI Hu DING shanghai Key Laboratory of Mechanics in Energy Engineering School of Mechanics and Engineering ScienceShanghai Frontier Science Center of MechanoinformaticsShanghai UniversityShanghai 200444China

Eliminating the effects of gravity and designing nonlinear energy sinks(NESs)that suppress vibration in the vertical direction is a challenging task with numerous damping *** this paper,the dynamic design of a vertical track nonlinear energy sink(VTNES)with zero linear stiffness in the vertical direction is proposed and realized for the first *** motion differential equations of the VTNES coupled with a linear oscillator(LO)are *** the strong nonlinearity considered of the VTNES,the steady-state response of the system is analyzed with the harmonic balance method(HBM),and the accuracy of the HBM is verified *** this basis,the VTNES prototype is manufactured,and its nonlinear stiffness is *** damping effect and dynamic characteristics of the VTNES are studied theoretically and *** results show that the VTNES has better damping effects when strong modulation responses(SMRs)***,even for small-amplitude vibration,the VTNES also has a good vibration suppression *** sum up,in order to suppress the vertical vibration,an NES is designed and developed,which can suppress the vertical vibration within certain ranges of the resonance frequency and the vibration intensity.

关键词： track nonlinear energy sink(TNES) vertical direction gravity nonlinear stiffness harmonic balance method(HBM) vibration control