检索结果-南通市图书馆

Nuclear Science and Techniques 2024年第1期35卷 45-58页

作者： Yi-Xing Lu Wen-Cheng Fang Yu-Sen Guo Zhen-Tang Zhao shanghai institute of Applied Physics Chinese Academy of Sciences Shanghai 201800China University of Chinese Academy of Sciences Beijing 101408China shanghai Advanced Research institute Chinese Academy of Sciences Shanghai 201204China shanghai Key Laboratory of Cryogenics&Superconducting RF Technology Shanghai 201800China shanghaiTech University Shanghai 201210China

Radio frequency quadrupoles(RFQs),which are crucial components of proton injectors,significantly affect the performance of proton accelerator *** RFQ with a high frequency of 714 MHz dedicated to compact proton injectors for medi-cal applications is designed in this *** RFQ is designed to accelerate proton beams from 50 keV to 4 MeV within a short length of 2 m and can be matched closely with the downstream drift tube linac to capture more particles through a preliminary *** develop an advanced RFQ,challenging techniques,including fabrication and tuning method,must be evaluated and verified using a *** aluminium prototype is derived from the conceptual design of the RFQ and then redesigned to confirm the radio frequency performance,fabrication procedure,and feasibility of the tuning ***,a new tuning algorithm based on the response matrix and least-squares method is developed,which yields favorable results based on the prototype,i.e.,the errors of the dipole and quadrupole components reduced to a low level after several tuning *** from the conceptual design and techniques obtained from the prototype,the formal mechanical design of the 2-m RFQ is ready for the next manufacturing step.

关键词： Compact proton injector RFQ IH-DTL High gradient Tuning

Tuina alleviates neuropathic pain through regulate the activation of microglia and the secretion of inflammatory cytokine in spinal cord

在线全文

学校读者我要写书评

暂无评论

Journal of Traditional Chinese Medicine 2024年第4期44卷 762-769页

作者： WU Zhiwei ZHU Qingguang KONG Lingjun SONG Pengfei ZHOU Xin GUO Guangxin ZHANG Shuaipan HE Tianxiang CHENG Yanbin FANG Min Yueyang Hospital of Integrated Traditional Chinese and Western Medicine Shanghai University of Traditional Chinese MedicineShanghai 200437China institute of Tuina Shanghai Institute of Traditional Chinese MedicineShanghai 200437China Shuguang Hospital Shanghai University of Traditional Chinese MedicineShanghai 200021China Department of Acupuncture and Tuina Shanghai University of Traditional Chinese MedicineShanghai 201203China

OBJECTIVE:To observe the analgesic effects of Tuina on neuropathic pain(NPP)and the underlying ***:Forty-eight Sprague-Dawley(SD)rats were assigned by random into three treatment groups:sham,chronic constriction injury(CCI),and *** group contained sixteen *** model was generated by ligating the right sciatic *** changes of CCI were assessed by the paw withdrawal threshold(PWT)and paw withdrawal latency(PWL).In addition,biochemical techniques such as immunofluorescence staining,enzyme-linked immunosorbent assay(ELISA)and Western blotting were used to profile levels of microglia activation and inflammatory factors in the spinal dorsal horn(SDH)of ***(clockwise pressing and rubbing)was performed at Chengshan(BL57)to observe the analgesic effects on CCI rats and the underlying ***:Rats with CCI experienced significant reduction in the PWT and PWL of the right hind paw relative to CCI group at day *** treatment rescued this situation significantly on days 10 and ***,Iba-1,microglia M1 receptor CD68,tumor necrosis factor-α(TNF-α),and interleukin-1β(IL-1β)were higher in the right SDH for CCI group compared to the sham group on day *** expected,Tuina partially downregulated the CCI-induced overexpressed Iba-1,CD68,TNF-α,and IL-1βin the SDH of CCI ***:Tuina induces a time-dependent cumulative analgesic effect in CCI rats by inhibiting the activation of microglia and the secretion of IL-1βand TNF-αin SDH.

关键词： Tuina neuralgia microglia inflammatory cytokine spinal cord

Multi-blade rubbing characteristics of the shaft-disk-blade-casing system with large rotation

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第1期45卷 111-136页

作者： Zhiyuan WU Linchuan ZHAO Han YAN Ge YAN Ao CHEN Wenming ZHANG State Key Laboratory of Mechanical System and Vibration Shanghai Jiao Tong UniversityShanghai 200240China shanghai institute of Aerospace Systems Engineering Shanghai 201108China

Blade rubbing faults cause detrimental impact on the operation of aeroengines. Most of the existing studies on blade rubbing in the shaft-disk-blade-casing(SDBC) system have overlooked the elastic deformation of the blade, while some only consider the whirl of the rotor, neglecting its spin. To address these limitations, this paper proposes a dynamic model with large rotation for the SDBC system. The model incorporates the spin and whirl of the rotor, enabling the realistic reproduction of multiblade rubbing faults. To verify the accuracy of the SDBC model with large rotation and demonstrate its capability to effectively consider the rotational effects such as the centrifugal stiffening and gyroscopic effects, the natural characteristics and dynamic responses of the proposed model are compared with those obtained from reported research and experimental results. Furthermore, the effects of the rotating speed, contact stiffness,and blade number on the dynamic characteristics of the SDBC system with multi-blade rubbing are investigated. The results indicate that the phase angle between the rotor deflection and the unbalance excitation force increases with the increasing rotating speed,which significantly influences the rubbing penetration of each blade. The natural frequency of the SDBC system with rubbing constrain can be observed in the acceleration response of the casing and the torsional response of the shaft, and the frequency is related to the contact stiffness. Moreover, the vibration amplitude increases significantly with the product of the blade number under rubbing, and the rotating frequency approaches the natural frequency of the SDBC system. The proposed model can provide valuable insight for the fault diagnosis of rubbing in bladed rotating machinery.

关键词： shaft-disk-blade-casing(SDBC) large rotation spin and whirl multi-blade rubbing rotational effect

Space truss construction modeling based on on-orbit assembly motion feature

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第3期37卷 365-379页

作者： Changjie ZHAO Weizhong GUO Meng CHEN Jiaxing HU Youcheng HAN Rongfu LIN State Key Lab of Mechanical System and Vibration Shanghai Jiao Tong UniversityShanghai 200240China institute of Aerospace System Engineering shanghai Shanghai 201109China

More space truss construction has been planned to develop and utilize space *** trusses are designed in the way of large-scale,complex,modular,and on-orbit *** meet the upcoming challenge of large-scale space infrastructure construction,it is necessary to study space truss automation design and robotic *** paper proposes an ordinal finite screw adjacency matrix model(OFSAMM),focusing on the relationship between assembly motions,to express and compute a space truss *** this model,a space truss is abstracted as a set of ordered assembly motions,each of which is recorded as a finite screw as the basic element of the truss and its *** operation of truss transformation is also derived under this ***,the truss configuration,the assembly sequence,the truss sub-assembly,the truss components,and the on-orbit assembly task can be expressed and calculated in a unified model,which is calculated and stores the truss topology and assembly with the minimum storage *** the end of this paper,we introduce how to synthesize and optimize space truss design through two *** study will help to improve design ***,it provides a theoretical basis for the automatic construction of space truss structures,especially in the next stage.

关键词： Adjacency matrix Finite screw On-orbit construction modeling Space applications Space trusses Topology design

Operational Characteristics of Loop Heat Pipe in Microgravity and Normal Gravity Environments

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第4期33卷 1394-1408页

作者： ZHONG Siyuan XIE Rongjian LI Yunfei SUN Xiaojin shanghai Institution of Technology and Physics Shanghai200083China University of Chinese Academy of Sciences Beijing100049China shanghai institute of Satellite Engineering Shanghai200240China

The loop heat pipe(LHP)is an advanced,efficient two-phase heat transfer unit,whose operational performance may be affected by microgravity conditions in contrast to ground-based *** performance of on-orbit temperature data and ground test of a copper-propylene LHP with a condenser temperature range of 243.15 K to 303.15 K were employed to compared and *** LHP has successfully started up for more than 193 times with a good heat transfer performance and a stable start-up stabilization on-orbit under a complex orbital heating environment for more than eight *** a small heat load(10.0W),the average start-up time is 110.0 s while the start-up temperature ranges from 5.71 K-12.78 *** start-up time at large temperature differences in the high temperature zone will be higher than the time required for start-up at smaller temperature differences in the low *** the condenser temperature is 250.0 K,the stable temperature difference on orbit is 3.83 K,which is generally consistent in heat transfer compared to 2.20 K in the ground *** this paper,we can conclude that the on-orbit flight data up to now can provide a reference to the design of subsequent LHP space applications.

关键词： Loop Heat Pipe(LHP) start up microgravity on-orbit experiment

An active high-static-low-dynamic-stiffness vibration isolator with adjustable buckling beams:theory and experiment

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第3期45卷 425-440页

作者： Kefan XU Muqing NIU Yewei ZHANG Liqun CHEN School of Science Harbin Institute of TechnologyShenzhen 518055Guangdong ProvinceChina College of Aerospace Engineering Shenyang Aerospace UniversityShenyang 110136China shanghai Key Laboratory of Mechanics in Energy Engineering Shanghai Frontier Science Center of MechanoinformaticsShanghai Institute of Applied Mathematics and MechanicsSchool of Mechanics and Engineering ScienceShanghai UniversityShanghai 200444China shanghai institute of Aircraft Mechanics and Control Shanghai 200092China

High-static-low-dynamic-stiffness(HSLDS)vibration isolators with buckling beams have been widely used to isolate external *** active adjustable device composed of proportion integration(PI)active controllers and piezoelectric actuators is proposed for improving the negative stiffness stroke of buckling beams.A nonlinear output frequency response function is used to analyze the effect of the vibration *** prototype of the active HSLDS device is built,and the verification experiment is *** results show that compared with the traditional HSLDS vibration isolator,the active HSLDS device can broaden the isolation frequency bandwidth,and effectively reduce the resonant amplitude by adjusting the active control *** maximum vibration reduction rate of the active HSLDS vibration isolator can attain 89.9%,and the resonant frequency can be reduced from 31.08 Hz to 13.28 ***,this paper devotes to providing a new design scheme for enhanced HSLDS vibration isolators.

关键词： active control high-static-low-dynamic-stiffness(HSLDS) vibration isola-tor dynamic analysis

A viscoelastic metamaterial beam for integrated vibration isolation and energy harvesting

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第7期45卷 1243-1260页

作者： Long ZHAO Zeqi LU Hu DING Liqun CHEN shanghai institute of Applied Mathematics and Mechanics Shanghai Key Laboratory of Mechanics in Energy EngineeringShanghai Frontier Science Center of MechanoinformaticsSchool of Mechanics and Engineering ScienceShanghai UniversityShanghai200072China School of Microelectronics Shanghai UniversityShanghai201800China

Locally resonant metamaterials have low-frequency band gaps and the capability of converging vibratory energy in the band gaps at resonant *** has been demonstrated by several researchers that the dissipatioin of vibratory energy within the band gap can be improved by using viscoelastic *** paper designs an integrated viscoelastic metamaterial for energy harvesting and vibration *** viscoelastic metamaterial is achieved by a viscoelastic beam periodically arrayed with spatial ball-pendulum nonlinear energy *** nonlinear resonator with an energy harvesting function is achieved by placing a free-rolling magnetic ball in a spherical cavity with an additional induction *** dynamic equations of viscoelastic metamaterials under transverse excitation are established,and the energy harvesting and vibration isolation characteristics within the dispersion relation of viscoelastic metamaterials are *** results show that the vibrations of the main body of the viscoelastic metamaterial beam are significantly suppressed in the frequency range of the local resonance band *** the same time,the elastic waves are limited in the nonlinear resonator with an energy harvesting function,which improves the energy ***,an experimental platform of viscoelastic metamaterial vibration is established for validation purposes.

关键词： viscoelastic metamaterial nonlinear vibration vibration isolation energy harvesting

Cone-beam computed tomography noise reduction method based on U-Net with convolutional block attention module in proton therapy

在线全文

学校读者我要写书评

暂无评论

Nuclear Science and Techniques 2024年第7期35卷 89-100页

作者： Xing-Yue Ruan Xiu-Fang Li Meng-Ya Guo Mei Chen Ming Lv Rui Li Zhi-Ling Chen shanghai institute of Applied Physics Chinese Academy of SciencesShanghai201800China University of Chinese Academy of Sciences Beijing100049China shanghai Advanced Research institute Chinese Academy of SciencesShanghai201210China Department of Radiation Oncology Ruijin HospitalShanghai Jiao Tong University School of MedicineShanghai200025China shanghai Key Laboratory of Proton therapy Shanghai201801China

Cone-beam computed tomography(CBCT) is mostly used for position verification during the treatment process. However,severe image artifacts in CBCT hinder its direct use in dose calculation and adaptive radiation therapy re-planning for proton therapy. In this study, an improved U-Net neural network named CBAM-U-Net was proposed for CBCT noise reduction in proton therapy, which is a CBCT denoised U-Net network with convolutional block attention modules. The datasets contained 20 groups of head and neck images. The CT images were registered to CBCT images as ground truth. The original CBCT denoised U-Net network, sCTU-Net, was trained for model performance comparison. The synthetic CT(SCT) images generated by CBAM-U-Net and the original sCTU-Net are called CBAM-SCT and U-Net-SCT images, respectively. The HU accuracies of the CT, CBCT, and SCT images were compared using four metrics: mean absolute error(MAE), root mean square error(RMSE), peak signal-to-noise ratio(PSNR), and structure similarity index measure(SSIM). The mean values of the MAE, RMSE, PSNR, and SSIM of CBAM-SCT images were 23.80 HU, 64.63 HU, 52.27 dB, and 0.9919, respectively,which were superior to those of the U-Net-SCT images. To evaluate dosimetric accuracy, the range accuracy was compared for a single-energy proton beam. The γ-index pass rates of a 4 cm × 4 cm scanned field and simple plan were calculated to compare the effects of the noise reduction capabilities of the original U-Net and CBAM-U-Net on the dose calculation results. CBAM-U-Net reduced noise more effectively than sCTU-Net, particularly in high-density tissues. We proposed a CBAM-U-Net model for CBCT noise reduction in proton therapy. Owing to the excellent noise reduction capabilities of CBAM-U-Net, the proposed model provided relatively explicit information regarding patient tissues. Moreover, it maybe be used in dose calculation and adaptive treatment planning in the future.

关键词： Proton therapy Cone-beam CT CBAM-U-Net γ-index

Al-doped ZnO/WO_(3) heterostructure films prepared by magnetron sputtering for isopropanol sensors

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第1期43卷 247-256页

作者： Wei-Xiang Gao Xue-Ting Chang Xiao-Jie Zhu Jun-Feng Li Ying-Chang Jiang Dong-Sheng Wang Chuan-Xiao Yang Shi-Bin Sun College of Logistics Engineering Shanghai Maritime UniversityShanghai 201306China College of Ocean Science and Engineering Shanghai Maritime UniversityShanghai 201306China institute of Logistics Science and Engineering Shanghai Maritime UniversityShanghai 201306China

Metal oxide semiconductors(MOSs) are ideal sensing materials for detecting volatile organic compounds due to their low cost, diversity, high stability, and ease of production. However, it remains a grand challenge to develop the MOSs-based gas sensors for sensing isopropanol with desired performance via a simple, effective,and controllable method. Herein, we reported the preparation of the Al-doped Zn O(AZO)/WO_(3) heterostructure films by directly depositing the AZO coating onto the WO_(3) coating using a strategy of magnetron sputtering. The AZO/WO_(3) heterostructure films were constructed by numbers of irregular nanoparticles that were interconnected with each other. The AZO/WO_(3) heterostructure films-based gas sensors exhibited excellent isopropanolsensing performance with high response, promising selectivity, low detection limit, fast response rate, wide detection range, and ideal reproducibility. The promising isopropanol-sensing performance of the AZO/WO_(3) heterostructure films arises mainly from their high uniformity, unique microstructures with high surface roughness,and the construction of the heterostructure between the AZO and WO_(3) coatings. This work provides a versatile approach to prepare the MOSs-based heterostructure films for assembling the gas sensors.

关键词： Metal oxide semiconductors Gas sensors Aldoped ZnO/WO_(3) Heterostructure films Isopropanol Magnetron sputtering

Amplified internal electric field of Cs_(2)CuBr_(4)@WO_(3-x)S-scheme heterojunction for efficient CO_(2)photoreduction

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第5期92卷 521-533页

作者： Zhijie Zhang Xuesheng Wang Junyi Qian Jiayue Xu School of Materials Science and Engineering Shanghai Institute of TechnologyShanghai 201418China

Heterojunction construction,especially S-scheme heterojunction,represents an efficient universal strategy to achieve high-performance photocatalytic *** further performance stimulation of these well-designed heterojunctions,modulating the interfacial internal electric field(IEF)to steer dynamic charge transfer represents a promising ***,we realized the precise regulation of Fermi level(E_(F))of the oxidation semiconductor(mesoporous WO_(3-x))by tailoring the concentration of oxygen vacancies(V_(O)),maximizing the IEF intensity in Cs_(2)CuBr_(4)@WO_(3-x)(CCB@WO_(3-x))S-scheme *** augmented IEF affords a robust driving force for directional electron delivery,leading to boosted charge ***,the developed CCB@WO_(3-x)S-scheme heterojunction demonstrated outstanding photocatalytic CO_(2)reduction performance,with the electron consumption rate(Relectron)up to 390.34μmol g^(-1)h^(-1),which is 3.28 folds higher than that of pure *** in-depth analysis of the S-scheme electron transfer mode was presented via theoretical investigations,electron spin resonance(ESR),photo-irradiated Kelvin probe force microscopy(KPFM),and in-situ X-ray photoelectron spectroscopy(XPS).Finally,the CO_(2)photoconversion route was explored in detail using in-situ diffuse reflectance infrared Fourier transform spectroscopy(DRIFTS)and DFT theoretical calculations.

关键词： Cs_(2)CuBr_(4) WO_(3-x) Oxygen vacancy S-scheme heterojunction Internal electricfield