检索结果-南通市图书馆

Petroleum Science 2024年第2期21卷 1369-1384页

作者： Chong-Zheng Sun Yu-Xing Li Hui Han Xiao-Yi Geng Xiao Lu College of Energy Storage Technology Shandong University of Science and TechnologyQingdao 266590ShandongChina College of Pipeline and Civil Engineering/shandong provincial key laboratory of oil&gas Storage and Transportation Safety China University of PetroleumQingdao 266580ShandongChina

Liquid hydrogen storage and transportation is an effective method for large-scale transportation and utilization of hydrogen energy. Revealing the flow mechanism of cryogenic working fluid is the key to optimize heat exchanger structure and hydrogen liquefaction process(LH2). The methods of cryogenic visualization experiment, theoretical analysis and numerical simulation are conducted to study the falling film flow characteristics with the effect of co-current gas flow in LH2spiral wound heat exchanger.The results show that the flow rate of mixed refrigerant has a great influence on liquid film spreading process, falling film flow pattern and heat transfer performance. The liquid film of LH2mixed refrigerant with column flow pattern can not uniformly and completely cover the tube wall surface. As liquid flow rate increases, the falling film flow pattern evolves into sheet-column flow and sheet flow, and liquid film completely covers the surface of tube wall. With the increase of shear effect of gas-phase mixed refrigerant in the same direction, the liquid film gradually becomes unstable, and the flow pattern eventually evolves into a mist flow.

关键词： Hydrogen liquefaction Spiral wound heat exchanger Flow pattern transition Falling film flow

Challenges in Li-ion battery high-voltage technology and recent advances in high-voltage electrolytes

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第4期91卷 73-98页

作者： Jianguo Liu Baohui Li Jinghang Cao Xiao Xing Gan Cui shandong key laboratory of oil&gas Storage and Transportation Safety College of Pipeline and Civil EngineeringChina University of Petroleum(East China)Qingdao 266580ShandongChina

The electrolyte directly contacts the essential parts of a lithium-ion battery,and as a result,the electrochemical properties of the electrolyte have a significant impact on the voltage platform,charge discharge capacity,energy density,service life,and rate discharge performance.By raising the voltage at the charge/discharge plateau,the energy density of the battery is increased.However,this causes transition metal dissolution,irreversible phase changes of the cathode active material,and parasitic electrolyte oxidation reactions.This article presents an overview of these concerns to provide a clear explanation of the issues involved in the development of electrolytes for high-voltage lithium-ion batteries.Additionally,solidstate electrolytes enable various applications and will likely have an impact on the development of batteries with high energy densities.It is necessary to improve the high-voltage performance of electrolytes by creating solvents with high thermal stabilities and high voltage resistance and additives with superior film forming performance,multifunctional capabilities,and stable lithium salts.To offer suggestions for the future development of high-energy lithium-ion batteries,we conclude by offering our own opinions and insights on the current development of lithium-ion batteries.

关键词： Lithium-ion battery High voltage Electrolyte additive Solid electrolyte

The occurrence characteristics of oil in shales matrix from organic geochemical screening data and pore structure properties:An experimental study Author links open overlay panel

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2024年第1期21卷 1-13页

作者： Zi-Zhi Lin Jun-Qian Li Shuang-Fang Lu Qin-Hong Hu Peng-Fei Zhang Jun-Jie Wang Qi Zhi Hong-Sheng Huang Na Yin Yue Wang Tian-Chen Ge National key laboratory of deep oil and gas China University of Petroleum(East China)Qingdao 266580ShandongChina School of Geosciences China University of Petroleum(East China)Qingdao 266580ShandongChina Sanya Offshore oil&gas Research Institute Northeast Petroleum UniversitySanya 572025HainanChina College of Earth Science and Engineering Shandong University of Science and TechnologyQingdao 266590ShandongChina

The occurrence characteristics of shale oil are of great significance to the movability of shale oil.In this study,the occurrence characteristics of oil in the shale matrix at Funing Formation shale in Subei Basin were quantitatively evaluated by organic geochemistry and microscopic pore structure characterization experiments.The Multiple Isothermal Stages Pyrolysis(MIS)experiment results show that the content of total oil,adsorbed oil,and free oil in the shales are 3.15-11.25 mg/g,1.41-4.95 mg/g,and 1.74-6.51 mg/g,respectively.among which the silicon-rich shale has the best oil-bearing.The relative content of free oil shows an increasing trend in pores with pore diameters greater than 3 nm.When the relative content of free oil reaches 100%,the pore size of silicon-rich shale is about 200 nm,while that of calcium-rich shale,clay-rich shale,and siliceous mixed shale is about 10 nm.The occurrence law of adsorbed oil is opposite to that of free oil,which indicates that shale oil will occur in the pores and fractures in a free state in a more extensive pore size range(>200 nm).This study also enables us to further understand the occurrence characteristics of shale oil under the interaction of occurrence state and occurrence space.

关键词： Shale oil Occurrence characteristics Sequential solvent extraction Low-temperature nitrogen adsorption Funing Formation Dongtai Depression

Differences and identification on multi-time hydrocarbon generation of carboniferous-permian coaly source rocks in the Huanghua Depression,Bohai Bay Basin

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2024年第2期21卷 765-776页

作者： Jin-Jun Xu Xian-Gang Cheng Shu-Nan Peng Jun-Cai Jiang Qi-Long Wu Da Lou Fu-Qi Cheng La-Mei Lin National key laboratory of deep oil and gas China University of Petroleum(East China)Qingdao 266580ShandongChina PetroChina Dagang oilfield Company Tianjin300280China

Coal is a solid combustible mineral,and coal-bearing strata have important hydrocarbon generation potential and contribute to more than 12%of the global hydrocarbon resources.However,the deposition and hydrocarbon evolution process of ancient coal-bearing strata is characterized by multiple geological times,leading to obvious distinctions in their hydrocarbon generation potential,geological processes,and production,which affect the evaluation and exploration of hydrocarbon resources derived from coaly source rocks worldwide.This study aimed to identify the differences on oil-generated parent macerals and the production of oil generated from different coaly source rocks and through different oil generation processes.Integrating with the analysis of previous tectonic burial history and hydrocarbon generation history,high-temperature and high-pressure thermal simulation experiments,organic geochemistry,and organic petrology were performed on the Carboniferous-Permian(C-P)coaly source rocks in the Huanghua Depression,Bohai Bay Basin.The oil-generated parent macerals of coal's secondary oil generation process(SOGP)were mainly hydrogen-rich collotelinite,collodetrinite,sporinite,and cutinite,while the oil-generated parent macerals of tertiary oil generation process(TOGP)were the remaining small amount of hydrogen-rich collotelinite,sporinite,and cutinite,as well as dispersed soluble organic matter and unexhausted residual hydrocarbons.Compared with coal,the oil-generated parent macerals of coaly shale SOGP were mostly sporinite and cutinite.And part of hydrogen-poor vitrinite,lacking hydrocarbon-rich macerals,and macerals of the TOGP,in addition to some remaining cutinite and a small amount of crude oil and bitumen from SOGP contributed to the oil yield.The results indicated that the changes in oil yield had a good junction between SOGP and TOGP,both coal and coaly shale had higher SOGP aborted oil yield than TOGP starting yield,and coaly shale TOGP peak oil yield was lower than SOGP peak oil yield.There were significa

关键词： Thermal simulation Multi-time oil generation processes Coaly source rock Carboniferous-permian Huanghua Depression

Phase behavior of gas condensate in porous media using real-time computed tomography scanning

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2024年第2期21卷 1032-1043页

作者： Wen-Long Jing Lei Zhang Ai-Fen Li Jun-Jie Zhong Hai Sun Yong-Fei Yang Yu-Long Cheng Jun Yao Institute of Petroleum Engineering China University of Petroleum(East China)Qingdao266580ShandongChina National key laboratory of deep oil and gas China University of Petroleum(East China)Qingdao266580ShandongChina

The phase behavior of gas condensate in reservoir formations differs from that in pressure-volume-temperature(PVT)cells because it is influenced by porous media in the reservoir formations.Sandstone was used as a sample to investigate the influence of porous media on the phase behavior of the gas condensate.The pore structure was first analyzed using computed tomography(CT)scanning,digital core technology,and a pore network model.The sandstone core sample was then saturated with gas condensate for the pressure depletion experiment.After each pressure-depletion state was stable,realtime CT scanning was performed on the sample.The scanning results of the sample were reconstructed into three-dimensional grayscale images,and the gas condensate and condensate liquid were segmented based on gray value discrepancy to dynamically characterize the phase behavior of the gas condensate in porous media.Pore network models of the condensate liquid ganglia under different pressures were built to calculate the characteristic parameters,including the average radius,coordination number,and tortuosity,and to analyze the changing mechanism caused by the phase behavior change of the gas condensate.Four types of condensate liquid(clustered,branched,membranous,and droplet ganglia)were then classified by shape factor and Euler number to investigate their morphological changes dynamically and elaborately.The results show that the dew point pressure of the gas condensate in porous media is 12.7 MPa,which is 0.7 MPa higher than 12.0 MPa in PVT cells.The average radius,volume,and coordination number of the condensate liquid ganglia increased when the system pressure was between the dew point pressure(12.7 MPa)and the pressure for the maximum liquid dropout,Pmax(10.0 MPa),and decreased when it was below Pmax.The volume proportion of clustered ganglia was the highest,followed by branched,membranous,and droplet ganglia.This study provides crucial experimental evidence for the phase behavior changing process of gas condensate in porous media d

关键词： gas condensate Pressure depletion Real-time micro-computed tomography scanning Distribution of condensate liquid

Probabilistic seismic inversion based on physics-guided deep mixture density network

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2024年第3期21卷 1611-1631页

作者： Qian-Hao Sun Zhao-Yun Zong Xin Li National key laboratory of deep oil and gas China University of Petroleum(East China) Laoshan laboratory CNOOC Research Institute Ltd.

Deterministic inversion based on deep learning has been widely utilized in model parameters estimation.Constrained by logging data, seismic data, wavelet and modeling operator, deterministic inversion based on deep learning can establish nonlinear relationships between seismic data and model parameters.However, seismic data lacks low-frequency and contains noise, which increases the non-uniqueness of the solutions. The conventional inversion method based on deep learning can only establish the deterministic relationship between seismic data and parameters, and cannot quantify the uncertainty of inversion. In order to quickly quantify the uncertainty, a physics-guided deep mixture density network(PG-DMDN) is established by combining the mixture density network(MDN) with the deep neural network(DNN). Compared with Bayesian neural network(BNN) and network dropout, PG-DMDN has lower computing cost and shorter training time. A low-frequency model is introduced in the training process of the network to help the network learn the nonlinear relationship between narrowband seismic data and low-frequency impedance. In addition, the block constraints are added to the PG-DMDN framework to improve the horizontal continuity of the inversion results. To illustrate the benefits of proposed method, the PG-DMDN is compared with existing semi-supervised inversion method. Four synthetic data examples of Marmousi II model are utilized to quantify the influence of forward modeling part, low-frequency model, noise and the pseudo-wells number on inversion results, and prove the feasibility and stability of the proposed method. In addition, the robustness and generality of the proposed method are verified by the field seismic data.

关键词： deep learning Probabilistic inversion Physics-guided deep mixture density network

Analytical solution for the effective elastic properties of rocks with the tilted penny-shaped cracks in the transversely isotropic background

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第1期21卷 221-243页

作者： Zheng-Qian Ma Xing-Yao Yin Zhao-Yun Zong Yuan-Yuan Tan Ya-Ming Yang National key laboratory of deep oil and gas China University of Petroleum(East China)Qingdao266580ShandongChina School of Geosciences China University of Petroleum(East China)Qingdao 266580ShandongChina Pilot National laboratory for Marine Science and Technology(Qingdao) Qingdao266200ShandongChina

Seismic prediction of cracks is of great significance in many disciplines,for which the rock physics model is indispensable.However,up to now,multitudinous analytical models focus primarily on the cracked rock with the isotropic background,while the explicit model for the cracked rock with the anisotropic background is rarely investigated in spite of such case being often encountered in the earth.Hence,we first studied dependences of the crack opening displacement tensors on the crack dip angle in the coordinate systems formed by symmetry planes of the crack and the background anisotropy,respectively,by forty groups of numerical experiments.Based on the conclusion from the experiments,the analytical solution was derived for the effective elastic properties of the rock with the inclined penny-shaped cracks in the transversely isotropic background.Further,we comprehensively analyzed,according to the developed model,effects of the crack dip angle,background anisotropy,filling fluid and crack density on the effective elastic properties of the cracked rock.The analysis results indicate that the dip angle and background anisotropy can significantly either enhance or weaken the anisotropy degrees of the P-and SH-wave velocities,whereas they have relatively small effects on the SV-wave velocity anisotropy.Moreover,the filling fluid can increase the stiffness coefficients related to the compressional modulus by reducing crack compliance parameters,while its effects on shear coefficients depend on the crack dip angle.The increasing crack density reduces velocities of the dry rock,and decreasing rates of the velocities are affected by the crack dip angle.By comparing with exact numerical results and experimental data,it was demonstrated that the proposed model can achieve high-precision estimations of stiffness coefficients.Moreover,the assumption of the weakly anisotropic background results in the consistency between the proposed model and Hudson's published theory for the orthorhombic rock.

关键词： Effective elastic property Tilted crack Transverse isotropy Analytical solution Crack opening displacement

A novel algorithm for evaluating cement azimuthal density based on perturbation theory in horizontal well

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2024年第1期21卷 244-251页

作者： Ji-Lin Fan Feng Zhang Qian Chen Hao-Chen Song Lu-Yu Zhong Yue-Xiang Dai National key laboratory of deep oil and gas School of GeosciencesChina University of Petroleum(East China)Qingdao 266580ShandongChina China National Logging Corporation Xi'an 710076ShaanxiChina Sinopec Matrix Corporation Qingdao 266001ShandongChina

Cement density monitoring plays a vital role in evaluating the quality of cementing projects,which is of great significance to the development of oil and gas.However,the presence of inhomogeneous cement distribution and casing eccentricity in horizontal wells often complicates the accurate evaluation of cement azimuthal density.In this regard,this paper proposes an algorithm to calculate the cement azimuthal density in horizontal wells using a multi-detector gamma-ray detection system.The spatial dynamic response functions are simulated to obtain the influence of cement density on gamma-ray counts by the perturbation theory,and the contribution of cement density in six sectors to the gamma-ray recorded by different detectors is obtained by integrating the spatial dynamic response functions.Combined with the relationship between gamma-ray counts and cement density,a multi-parameter calculation equation system is established,and the regularized Newton iteration method is employed to invert casing eccentricity and cement azimuthal density.This approach ensures the stability of the inversion process while simultaneously achieving an accuracy of 0.05 g/cm^(3) for the cement azimuthal density.This accuracy level is ten times higher compared to density accuracy calculated using calibration equations.Overall,this algorithm enhances the accuracy of cement azimuthal density evaluation,provides valuable technical support for the monitoring of cement azimuthal density in the oil and gas industry.

关键词： Cement azimuthal density Perturbation theory Casing eccentricity Spatial dynamic response function Regularized Newton iteration

Combined use of fly ash and silica to prevent the long-term strength retrogression of oil well cement set and cured at HPHT conditions

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2024年第2期21卷 1122-1134页

作者： Guo-Dong Cheng Xue-Yu Pang Jin-Sheng Sun Zheng-Song Qiu Chuang-Chuang Wang Jian-Kun Qin Ning Li School of Petroleum Engineering China University of Petroleum(East China)Qingdao266580ShandongChina National key laboratory of deep oil and gas China University of Petroleum(East China)Qingdao266580ShandongChina oil and gas Engineering Research Institute(Tarim oilfield Company) China National Petroleum CorporationTarim841000XinjiangChina

The long-term strength retrogression of silica-enriched oil well cement poses a significant threat to wellbore integrity in deep and ultra-deep wells, which is a major obstacle for deep petroleum and geothermal energy development. Previous attempts to address this problem has been unsatisfactory because they can only reduce the strength decline rate. This study presents a new solution to this problem by incorporating fly ash to the traditional silica-cement systems. The influences of fly ash and silica on the strength retrogression behavior of oil well cement systems directly set and cured under the condition of 200°C and 50 MPa are investigated. Test results indicate that the slurries containing only silica or fly ash experience severe strength retrogression from 2 to 30 d curing, while the slurries containing both fly ash and silica experience strength enhancement from 2 to 90 d. The strength test results are corroborated by further evidences from permeability tests as well as microstructure analysis of set cement. Composition of set cement evaluated by quantitative X-ray diffraction analyses with partial or no known crystal structure(PONKCS) method and thermogravimetry analyses revealed that the conversion of amorphous C-(A)-S-H to crystalline phases is the primary cause of long-term strength retrogression.The addition of fly ash can reduce the initial amount of C-(A)-S-H in the set cement, and its combined use with silica can prevent the crystallization of C-(A)-S-H, which is believed to be the working mechanism of this new admixture in improving long-term strength stability of oil well cement systems.

关键词： Fly ash Long-term strength retrogression High temperature Quantitative X-ray diffraction(QXRD) Partial or no known crystal structure(PONKCS)

Solid particle size characterization by a high-frequency collision response in pneumatic particulate flow

在线全文

学校读者我要写书评

暂无评论

Particuology 2024年第3期86卷 39-54页

作者： Kai Wang Yichen Li Ziang Chang Min Qin Guangming Fu Bangtang Yin Gang Wang jiaqi Tian School of Petroleum Engineering China University of Petroleum(East China)Qingdao266580China key laboratory of Unconventional oil&gas Development China University of Petroleum(East China)Ministry of EducationQingdao266580China National Engineering Research Center of oil&gas Drilling and Completion Technology Qingdao266580China Shock and Vibration of Engineering Materials and Structures key Lab ofSichuan Province Southwest University of Science and TechnologyMianyang621000China

A novel triaxial vibration method is developed for the real-time characterization of the solid particle size distribution(PsD)in pneumatic particulate flow,which is critical for chemical industry.In this work,the particle-wall collision and friction behaviours were analysed by the time-domain statistical and timefrequency joint methods to narrow the high-frequency response range by the initial experiment of free fall for a single particle,interparticle,and multiple particles.Subsequently,verification experiments of PSD characterization in pneumatic flow were performed.First,the quantitative triaxial energy response model that considers the particle size,shape,and mass factors were established.Second,a good agreement of the particle number identification was found between the triaxial vibration energy and mean particle size of 150-550μm.Moreover,the performance with the best accuracy was focused on a range of 42-43 kHz in the x-axis and z-axis and 36.8-38.8 kHz in the y-axis.Finally,the individual particle energy was inversely analysed by the triaxial vibration response within the optimized frequency bands,and the PSD was characterized in real-time by a low error rate,that is,5.2% from the XZ-axis direction of sand(42-43 kHz)and 5.6% from the XYZ-axis of glass(30.9-33.9 kHz,46.2-47.2 kHz,38.3-41.3 kHz for each axis response).Therefore,this research complements the existing approaches for PsD characterization in particulate multiphase flow.

关键词： Solid particulate flow Triaxial vibration High-frequency response Particle wall Particle size distribution