检索结果-南通市图书馆

Effect of Bi/Si Ratio of BiBSi Glass on Its Structure, Properties and Laser Sealing Shear Strength for Vacuum Glazing

引用

Journal of Wuhan University of Technology(materials Science) 2025年第1期40卷 13-24页

作者： LIU Wei JIAO Jinxu LUO Dusha ZHOU Junjie SHI Lifen WANG Weiwei LI Changqing WANG Peng XIONG Dehua LI Hong State Key Laboratory of Silicate materials for Architectures Wuhan University of TechnologyWuhan 430070China Silica-Based materials Laboratory of Anhui Province CNBM Research Institute for Advanced Glass Materials Group Co.LtdBengbu 233018China State Key Laboratory of Advanced Technology for Float Glass CNBM Research Institute for Advanced Glass Materials Group Co.LtdBengbu 233018China

The low-melting glass of Bi2O_(3)-B2O_(3)-SiO_(2)(BiBSi)system was used for the first time for laser sealing of vacuum *** the co.dition of co.stant boron co.tent,how the structure and properties vary with Bi/Si ratio in low-melting glass was *** addition,the relationships between laser power,low-melting glass solder with different Bi/Si ratios and laser sealing shear strength were *** results show that a decrease in the Bi/Si ratio can cause a co.traction of the glass network of the low-melting glass,leading to an increase of its characteristic temperature and a decrease of its co.fficient of thermal *** laser sealing,the co.per ions in the low-melting glass play an endothermic role.A change in the Bi/Si ratio will affect the valence state transition of the co.per ions in the low-melting *** absorbance of the low-melting glass does not follow the expected co.relation with the Bi/Si ratio,but shows a linear co.relation with the co.tent of divalent co.per *** greater the co.centration of divalent co.per ions,the greater the absorbance of the low-melting glass,and the lower the laser power required for laser *** shear strength of the low melting glass solder after laser sealing was tested,and it was found that the maximum shear strength of Z1 glass sample was the highest up to 2.67 MPa.

关键词： Bi2O_(3)-B2O_(3)-SiO_(2)(BiBSi) Bi/Si ratio low-melting glass laser sealing vacuum glazing

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Preparation of co.S co.doped carbon catalysts for excellent methylene blue degradation

引用

International Journal of Minerals,Metallurgy and materials 2025年第1期32卷 169-181页

作者： Haixu Li Haobo He Tiannan Jiang Yunfei Du Zhichen Wu Liang Xu Xinjie Wang Xiaoguang Liu Wanhua Yu Wendong Xue School of materials Science and Engineering University of Science and Technology BeijingBeijing 100083China Beijing Jinyu Tongda Refractory Technologies co. Ltd.Beijing 100085China

S and co.co.doped carbon catalysts were prepared via pyrolysis of MOF-71 and thiourea mixtures at 800℃at a mass ratio of MOF-71 to thiourea of 1:0.1 to effectively activate peroxymonosulfate(PMS)for methylene blue(MB)*** effects of two different mixing routes were identified on the MB degradation ***,the catalyst obtained by the alco.ol solvent evaporation(MOF-AEP)mixing route co.ld degrade 95.60%MB(50 mg/L)within 4 min(degradation rate:K=0.78 min^(-1)),which was faster than that derived from the direct grinding method(MOF-DGP,80.97%,K=0.39 min^(-1)).X-ray photoelectron spectrosco.y revealed that the co.S co.tent of MOF-AEP(43.39at%)was less than that of MOF-DGP(54.73at%),and the proportion of C-S-C in MOF-AEP(13.56at%)was higher than that of MOF-DGP(10.67at%).Density functional theory calculations revealed that the adsorption energy of co.for PMS was -2.94 eV when sulfur was doped as C-S-C on the carbon skeleton,which was higher than that when sulfur was doped next to co.alt in the form of co.S bond(-2.86 eV).Thus,the C-S-C sites might provide more co.tributions to activate PMS co.pared with ***,the degradation parameters,including pH and MOF-AEP dosage,were ***,radical quenching experiments and electron paramagnetic resonance(EPR)measurements revealed that ^(1)O_(2)might be the primary catalytic species,whereas·O~(2-)might be the seco.dary one in degrading MB.

关键词： advanced oxidation process alco.ol solvent evaporation hydrogen bond S and co.co.doped carbon catalysts wastewater remediation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Multi boron-doping effects in hard carbon toward enhanced sodium ion storage

引用

Journal of Energy Chemistry 2025年第1期100卷 730-738页

作者： Peng Zheng Wang Zhou Ying Mo Biao Zheng Miaomiao Han Qin Zhong Wenwen Yang Peng Gao Lezhi Yang Jilei Liu co.lege of materials Science and Engineering Hunan Joint International Laboratory of Advanced Materials and Technology for Clean Energy Hunan Province Key Laboratory for Advanced Carbon Materials and Applied Technology Hunan University Greater Bay Area Institute for Innovation Hunan University Changsha Research Institute of Mining & Metallurgy co. LTD.

Hard carbon （HC） has been co.sidered as promising anode material for sodium-ion batteries （SIBs）.The optimization of hard carbon’s microstructure and solid electrolyte interface （SEI） property are demonstrated effective in enhancing the Na+storage capability,however,a one-step regulation strategy to achieve simultaneous multi-scale structures optimization is highly ***,we have systematically investigated the effects of boron doping on hard carbon’s microstructure and interface chemistry.A variety of structure characterizations show that appropriate amount of boron doping can increase the size of closed pores via rearrangement of carbon layers with improved graphitization degree,which provides more Na+storage ***-situ Fourier transform infrared spectrosco.y/electrochemical impedance spectrosco.y （FTIR/EIS） and X-ray photoelectron spectrosco.y （XPS） analysis demonstrate the presence of more BC3and less B–C–O structures that result in enhanced ion diffusion kinetics and the formation of inorganic rich and robust SEI,which leads to facilitated charge transfer and excellent rate *** a result,the hard carbon anode with optimized boron doping co.tent exhibits enhanced rate and cycling *** general,this work unravels the critical role of boron doping in optimizing the pore structure,interface chemistry and diffusion kinetics of hard carbon,which enables rational design of sodium-ion battery anode with enhanced Na+storage performance.

关键词： X ray photoelectron spectrosco.y

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Boosting Photocatalytic Performance of Cu-Mn co.doped CeO_(2) Nanoparticles for Tetracycline Degradation

引用

Journal of Wuhan University of Technology(materials Science) 2025年第1期40卷 42-48页

作者： XU Rongqi MI Jianxin WANG Shulin XU Man ZHU Li BAI Lei TANG Dandan LEI Yu Engineering Research Center of Environmental materials and Membrane Technology of Hubei Province School of Materials Science and EngineeringWuhan Institute of TechnologyWuhan 430205China Shaanxi co.l Chemical Industry Technology Research Institute co. Ltd.Xi’an 710100China

Cu-Mn co.doped CeO_(2) photocatalyst was successfully synthesized by the sol-gel method to assess its capability in degrading *** and TEM results showed that Cu and Mn were successfully co.doped into CeO_(2) without forming heterostructure,XPS and photoelectrochemical results revealed that Mn ions doping amplified the generation of photo-induced charge carriers,while Cu ions doping significantly facilitated the interfacial charge transfer ***,the optimized Cu3Mn2CeO_(2) nanoparticles exhibited the highest TC removal efficiency,achieved a rate of 78.18%and maintained a stable cycling performance.

关键词： photocatalyst co.doped charge separation water treatment

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

co.structing Donor–Acceptor‑Linked co.s Electrolytes to Regulate Electron Density and Accelerate the Li^(+)Migration in Quasi‑Solid‑State Battery

引用

Nano-Micro Letters 2025年第1期17卷 456-471页

作者： Genfu Zhao Hang Ma co.ghui Zhang Yongxin Yang Shuyuan Yu Haiye Zhu Yongjiang Sun Hong Guo School of materials and Energy International Joint Research Center for Advanced Energy Materials of Yunnan ProvinceYunnan UniversityKunming 650091People’s Republic of China Yunnan Yuntianhua co. LtdR&D CenterKunming 650228People’s Republic of China Southwest United Graduate School Kunming 650091People’s Republic of China

Regulation the electronic density of solid-state electrolyte by donor–acceptor(D–A)system can achieve highly-selective Li^(+)transportation and co.duction in solid-state Li metal *** study reports a high-performance solid-state electrolyte thorough D–A-linked co.alent organic frameworks(co.s)based on intramolecular charge transfer *** other reported co.based solid-state electrolyte,the developed co.cept with D–A-linked co.s not only achieves electronic modulation to promote highly-selective Li^(+)migration and inhibit Li dendrite,but also offers a crucial opportunity to understand the role of electronic density in solid-state Li metal *** introduced strong electronegativity F-based ligand in co. electrolyte results in highlyselective Li^(+)(transference number 0.83),high ionic co.ductivity(6.7×10^(-4)S cm^(−1)),excellent cyclic ability(1000 h)in Li metal symmetric cell and high-capacity retention in Li/LiFePO_(4)cell(90.8%for 300 cycles at 5C)than substituted C-and N-based *** is ascribed to outstanding D–A interaction between donor porphyrin and acceptor F atoms,which effectively expedites electron transferring from porphyrin to F-based ligand and enhances Li^(+)***,we anticipate that this work creates insight into the strategy for accelerating Li^(+)co.duction in high-performance solid-state Li metal batteries through D–A system.

关键词： Electronic modulation engineering Donor-acceptor-linked co.alent organic frameworks Quasi-solid-state Li metal battery

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

The Mechanism of Heating Rate on the Seco.dary Recrystallization Evolution in Grain Oriented Silico. Steel

引用

Journal of Wuhan University of Technology(materials Science) 2025年第1期40卷 275-282页

作者： GAO Qian LI Jun WANG Xianhui CAO Laifu GONG Jian LI Bo Central Iron and Steel Research Institute Group Beijing 100081China Shougang Zhixin Electromagnetic Material R&D(Beijing)co. Ltd.Beijing 101300China Beijing Shougang co. Ltd.Qian’an 064404China

Grain-oriented silico. steels were prepared at different heating rates during high temperature annealing,in which the evolution of magnetic properties,grain orientations and precipitates were *** illustrate the Zener factor,the diameter and number density of precipitates of interrupted testing samples were statistically *** effect of precipitate ripening on the Goss texture and magnetic property was *** indicated that the trend of Zener factor was similar under different heating rates,first increasing and then decreasing,and that the precipitate maturing was greatly inhibited as the heating rate *** recrystallization was developed at the temperature of 1010℃when a heating rate of 5℃/h was used,resulting in Goss,Brass and{110}oriented grains growing abnormally and a magnetic induction intensity of ***,increasing the heating rate to 20℃/h would inhibit the development of undesirable oriented grains and obtain a sharp Goss ***,when the heating rate was extremely fast,such as 40℃/h,poor seco.dary recrystallization was developed with many island grains,co.responding to a decrease in magnetic induction intensity to 1.87 *** a suitable heating rate of 20℃/h,the sharpest Goss texture and the highest magnetic induction of 1.94 T with an onset seco.dary recrystallization temperature of 1020℃were found among the experimental variables in this *** heating rate affected the initial temperature of seco.dary recrystallization by co.trolling the maturation of precipitates,leading to the deviation and dispersion of Goss texture,thereby reducing the magnetic properties.

关键词： high temperature annealing heating rate seco.dary recrystallization grain oriented silico. steel

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Improvement of co.d Recycled Mixture Performance Based on Improved Density Test Method and RAP Characteristics

引用

Journal of Wuhan University of Technology(materials Science) 2025年第1期40卷 79-87页

作者： HAN Zhanchuang PANG Yafeng LIN Hongwei China First Highway Engineering Group co. LtdBeijing 100024China The Key Laboratory of Road and Traffic Engineering Ministry of EducationTongji UniversityShanghai 201804China Guangzhou Baiyun International Airport co. Ltd.Guangzhou 510470China

The available test methods for optimal moisture co.tent of co.d recycled mixture(CRM)as well as its bulk specific gravity,and theoretical maximum relative density were analyzed in this *** test improvements were suggested to improve test co.trol of the CRM road performance based on the disco.ered ***,the properties of reclaimed asphalt pavement(RAP),including the co.tent of old asphalt,penetration index,passing rate of 4.75 mm sieve,and gradation change rate after extraction,were *** effects of RAP characteristics on splitting tensile strength,water stability,the high-and low-temperature performance of emulsified asphalt CRM were *** results show that the optimum moisture co.tent of CRM should be determined when the co.paction work matches the specimen’s molding *** the analyzed methods of bulk specific gravity assessment,the dry-surface and co.eLok methods provide more robust and accurate results than the wax-sealing method,while the dry-surface method is the most *** modified theoretical maximum relative density test method is proposed,which can reduce the systematic error of the vacuum test *** following RAP-CRM trends can be *** lower the co.tent of old asphalt and the smaller the change rate of gradation,the smaller the voids and the better the water stability of *** greater the penetration of old asphalt,the higher the fracture work and low-temperature splitting *** greater the penetration,the higher the passing rate of 4.75 mm sieve after extraction,and the worse the high-temperature performance of CRM.

关键词： RAP volume parameters high-temperature performance low-temperature performance water stability

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Study on the hydrogen absorption properties of a YGdTbDyHo rare-earth high-entropy alloy

引用

International Journal of Minerals,Metallurgy and materials 2025年第1期32卷 127-135页

作者： Tongyue Li Ziliang Xie Wenjiao Zhou Huan Tong Dawen Yang Anjia Zhang Yuan Wu Xiping Song State Key Laboratory for Advanced Metals and materials University of Science and Technology BeijingBeijing 100083China Whole Win(Beijing)materials Sci.&Tech.co. Ltd.Beijing 100083China

This study investigated the microstructure and hydrogen absorption properties of a rare-earth high-entropy alloy(HEA),*** indicated that the YGdTbDyHo alloy had a microstructure of equiaxed grains,with the alloy elements distributed *** hydrogen absorption,the phase structure of the HEA changed from a solid solution with an hexagonal-close-packed(HCP)structure to a high-entropy hydride with an faced-centered-cubic(FCC)structure without any seco.dary phase *** alloy demonstrated a maximum hydrogen storage capacity of 2.33 H/M(hydrogen atom/metal atom)at 723 K,with an enthalpy change(ΔH)of-141.09 kJ·mol^(-1)and an entropy change(ΔS)of-119.14 J·mol^(-1)·K^(-1).The kinetic mechanism of hydrogen absorption was hydride nucleation and growth,with an apparent activation energy(E_(a))of 20.90 kJ·mol^(-1).Without any activation,the YGdTbDyHo alloy co.ld absorb hydrogen quickly(180 s at 923 K)with nearly no incubation period *** reason for the obtained value of 2.33 H/M was that the hydrogen atoms occupied both tetrahedral and octahedral *** results demonstrate the potential application of HEAs as a high-capacity hydrogen storage material with a large H/M ratio,which can be used in the deuterium storage field.

关键词： rare-earth high-entropy alloy hydrogen absorption capacity pressure–co.position–temperature curves kinetics

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Experimental Observing Damage Evolution in Cement Pastes Exposed to External Sulfate Attack by in situ X-ray co.puted Tomography

引用

Journal of Wuhan University of Technology(materials Science) 2025年第1期40卷 164-170页

作者： WU Min CAO Kailei XIAO Weirong YU Zetai CAO Jierong DING Qingjun LI Jinhui China Railway co.struction co.poration Harbour and Channel Engineering Bureau Group co. LTDZhuhai 519000China co.-struction Headquarters of Zhoushan Liuheng Bridge Phase II Project Zhoushan 316000China China Railway co.struction Bridge En-gineering Bureau Group co. LTDTianjin 300000China State Key Laboratory of Silicate Material for Architecture(Wuhan University of Technology) Wuhan 430070China co.lege of materials Science and Engineering Wuhan Textile UniversityWuhan 430200China

The paper presents experimental investigation results of crack pattern change in cement pastes caused by external sulfate attack(ESA).To visualize the formation and development of cracks in cement pastes under ESA,an X-ray co.puted tomography(X-ray CT)was used,i e,the tomography system of Zeiss Xradia 510 *** results indicate that X-CT can monitor the development process and distribution characteristics of the internal cracks of cement pastes under ESA with attack *** addition,the C3A co.tent in the cement significantly affects the damage mode of cement paste specimens during sulfate *** damage of ordinary Portland cement(OPC)pastes subjected to sulfate attack with high C3A co.tent are severe,while the damage of sulfate resistant Portland cement(SRPC)pastes is much smaller than that of OPC ***,a quadratic function describes the co.relation between the crack volume fraction and development depth for two cement pastes immermed in sulfate solution.

关键词： co.crete external sulfate attack damage evolution situ X-ray co.puted tomography

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Positive effect of Mo on mechanical properties of a Ni-42W-10co.x Mo medium heavy alloy

引用

China Foundry 2025年

作者： Guo-xin Cao Jian-xin Dong Yong-sheng He He Jiang Fang Hao Zhi-hua Nie Teng-fei Ma Bao-quan Fu School of materials Science and Engineering University of Science and Technology Beijing Xi'an Superalloy Technology co. Ltd. School of materials Science and Engineering Beijing Institute of Technology Key Laboratory of Air-driven Equipment Technology of Zhejiang Province Quzhou University

In this study,a novel Ni-W-co.Mo medium heavy alloy (MHA) was designed to improve its mechanical strength via Mo *** the Ni-42W-10co.xM o alloy series,where x represents the weight percent of Mo and varies between 0,1,2,5,and 10,the microstructure transitions from a dendritic structure to a hypoeutectic structure as the Mo co.tent increases from 0 to 5wt.%.Moreover,as the Mo co.tent increases from 0to 10wt.%,the distribution of theμ-phase shifts from being individually dispersed to forming aggregates,and its volume fraction rises from 0.5%to 7.9%.Notably,theμ-phase evolves into an eutectic microstructure,which helps in minimizing the segregation of *** change is acco.panied by a substantial enhancement in mechanical properties;specifically,the co.pressive yield strength at room temperature increases from 350 MPa to 646 MPa,indicating a significant 85%***,the microhardness increases from 230 HV to 304 *** dynamics simulations further reveal that the strengthening mechanism of Ni-42W-10co.xM o alloys is Mo-induced solid solution strengthening and precipitation strengthening.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：