检索结果-南通市图书馆

维普期刊数据库

Metal nanoparticles decorated CoFe-(oxy)hydroxysulfides nanosheets fabricated by a general strategy for electrocatalytic water splitting

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 26-38页

作者： Xiaodong Yang Haochen Shen Xiaoming Xiao Zhichao Li Qi Zhou Wei Yang Bin Jiang Yongli Sun Luhong Zhang Zhenhua Yan school of Chemical engineering and Technology Tianjin University Key Laboratory of advanced Energy materials Chemistry (Ministry of Education) Nankai University

This study presents a novel method to fabricate metal-decorated,sulfur-doped layered double hydroxides （M/SLDH） through spontaneous redox and sulfurization *** developed Ag/SLDH and Pt/SLDH catalysts with abundant heterogeneous interfaces and hierarchical nanostructures demonstrated outstanding oxygen evolution reaction （OER） and hydrogen evolution reaction （HER） performance,achieving low overpotentials of 212 and 35 mV at 10 mA cm-2in 1 M KOH,*** both anode and cathode in water splitting,they required only 1.47 V to reach 10 mA cm-2and exhibited high structural robustness,maintaining stability at 1000 mA cm-2for 300 ***-situ Raman analysis revealed that the synergistic effects of metal nanoparticles and S doping significantly promote the transformation into the S-Co1-xFexOOH layer,which serves as the active phase for water ***,ultraviolet photoelectron spectroscopy （UPS） and density functional theory （DFT） analyses indicated that incorporating metal nanoparticles and S doping increase electron density near the Fermi level and reduce reaction energy barriers,thus enhancing intrinsic OER and HER *** study provides a scalable strategy for synthesizing high-performance electrocatalysts for water splitting,with promising potential for broader applications.

关键词： LDH Spontaneous reaction Metal nanoparticles Water splitting

Microstructural evolution during the progressive transformation-induced plasticity effect in a Fe-0.1C-5Mnmedium manganese steel

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and materials 2025年第2期32卷 369-379页

作者： Mei Zhang Wenhao Li Yangfei Chen Yang Jiang Xiaofei Guo Han Dong school of materials Science and engineering Shanghai UniversityShanghai 200444China State Key Laboratory of advanced Special Steel Shanghai UniversityShanghai 200444China

The microstructural evolution of a cold-rolled and intercritical annealed medium-Mn steel(Fe-0.10C-5Mn)was investigated during uniaxial tensile ***-situ observations under scanning electron microscopy,transmission electron microscopy,and X-ray diffraction analysis were conducted to characterize the progressive transformation-induced plasticity process and associated fracture initiation *** findings were discussed with the local strain measurements via digital image *** results indicated that Lüders band formation in the steel was limited to 1.5%strain,which was mainly due to the early-stage martensitic phase transformation of a very small amount of the less stable large-sized retained austenite(RA),which led to localized stress concentrations and strain hardening and further retardation of *** small-sized RA exhibited high stability and progressively transformed into martensite and contributed to a stably extended Portevin-Le Chatelier *** volume fraction of RA gradually decreased from 26.8%to 8.2%prior to *** the late deformation stage,fracture initiation primarily occurred at the austenite/martensite and ferrite/martensite interfaces and the ferrite phase.

关键词： medium-Mn steel retained austenite progressive transformation-induced plasticity effect local strain fracture initiation

维普期刊数据库

Interfacial Zn2+-solvation regulator towards reversible and stable Zn anode

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 684-692页

作者： Miao Zhou Xiongbin Luo Hang Li Shan Guo Zhuang Tong Xiaotao Zhou Xu Li Zhaohui Hou Shuquan Liang Guozhao Fang College of Mechanical engineering Key Laboratory of Hunan Province for Advanced Carbon-based Functional Materials Hunan Institute of Science and Technology school of materials Science and engineering Key Laboratory of Electronic Packaging and Advanced Functional Materials of Hunan Province Central South University College of materials and Metallurgy Guizhou University National Energy Metal Resources and New materials Key Laboratory Central South University

Aqueous zinc-ion batteries （AZIBs） are fundamentally challenged by the instability of the electrode/electrolyte interface,predominantly due to irreversible zinc （Zn） deposition and hydrogen ***,the intricate mechanisms behind the electrochemical discrepancies induced by interfacial Zn2+-solvation and deposition behavior demand comprehensive *** molecules endowed with special functional groups （such as hydroxyl,carboxyl,etc.） have the potential to significantly optimize the solvation structure of Zn2+and regulate the interfacial electric double layer （EDL）.By increasing nucleation overpotential and decreasing interfacial free energy,these functional groups facilitate a lower critical nucleation radius,thereby forming an asymptotic nucleation model to promote uniform Zn ***,this study presents a pioneering approach by introducing trace amounts of n-butanol as solvation regulators to engineer the homogenized Zn （H-Zn） anode with a uniform and dense *** interfacial reaction and structure evolution are explored by in/ex-situ experimental techniques,indicating that the H-Zn anode exhibits dendrite-free growth,no by-products,and weak hydrogen evolution,in sharp contrast to the bare ***,the H-Zn anode achieves a remarkable Zn utilization rate of approximately 20% and simultaneously sustains a prolonged cycle life exceeding 500 ***,the H-Zn//NH4V4O10（NVO） full battery showcases exceptional cycle stability,retaining 95.04%capacity retention after 400 cycles at a large current density of 5 A *** study enlightens solvation-regulated additives to develop Zn anode with superior utilization efficiency and extended operational lifespan.

关键词： Aqueous zinc-ion batteries Interfacial reaction Asymptotic nucleation model Reversible and stable Zn anode

Micro-strain regulation strategy to stabilize perovskite lattice based on the categories and impact of strain on perovskite solar cells

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 578-604页

作者： Caixia Li Wenwu Liu Shiji Da Lingbin Kong Fen Ran State Key Laboratory of advanced Processing and Recycling of Nonferrous Metals Lanzhou University of Technology school of materials Science and engineering Lanzhou University of Technology

Photovoltaic metal halide perovskite solar cells(PSCs) convert light to electricity more efficiently than crystalline silicon cells, and the cost of materials used to make them is lower than that of silicon *** efficiency is not a core issue affecting the application of perovskite solar cells in special *** present, stability is the major technical encounters that hinders its further commercial development. Microstrain in PSCs is currently a significant factor responsible for the device's instability. Strain-induced ion migration is widely believed to accelerate perovskite degradation even when external stimuli are ***, it is imperative to study strain to enhance the stability of PSCs. This paper reviews recent developments to understand strain's origin and effect mechanisms on performance of PSCs, including ion migration,failure behavior, defect formation, and its effect on photoelectric properties, stability, and ***, several well-known strain management strategies are systematically introduced based on the strain effect mechanism and strain engineering on the film, providing more clues for further preparation with increased stability. The manipulation of external physical strain applied from films to entire devices has been extensively studied. Furthermore, recommendations for future research directions and chemical approaches have been provided. It is emphasized that strain engineering plays a crucial role in improving the efficiency and longevity of PSCs. Tensile strain causes rapid degradation, while moderate compressive strain and external strain control could improve properties and stability. Efforts should focus on controlling compressive strain to mitigate residual tensile strain and introducing it in a controlled manner. Future research endeavors may focus on exploring these pathways to improve the efficiency and lifespan of PSCs.

关键词： Halide perovskite solar cells Strain origins Strain effects Strain management

Fluorinated poly(p-triphenylene isatin) anion exchange membranes based on hydrophilic hydroxyl side chain modulation for fuel cells

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 702-709页

作者： Yiman Gu Yanchao Zhang Zhanyu Li Yijia Lei Baozeng Sun Xiaoyu Yu Zhe Wang College of Chemistry and Life Science Changchun University of Technology College of Chemical engineering Changchun University of Technology school of materials Science and engineering Changchun University of Technology Key Laboratory of advanced Functional Polymer Membrane materials of Jilin Province

The development of alkaline fuel cells is moving forward at an accelerated pace,and the application of ether-free bonded polymers to anion exchange membranes （AEMs） has been widely ***,the question of the“trade-off”between AEM ionic conductivity and dimensional stability remains *** strategy of inducing microphase separation to improve the performance of AEM has attracted much attention recently,but the design of optimal molecular structures is still being ***,this work introduced different ratios of 3-bromo-1,1,1-trifluoroacetone （x=40,50,and 60） into the main chain of poly（p-terphenylene isatin）.Because fluorinated groups have excellent hydrophobicity,hydrophilic hydroxyl-containing side chains are introduced to jointly adjust the formation of phase separation *** results show that PTI-PTF50-NOH AEM with the appropriate fluorinated group ratio has the best ionic conductivity and alkali stability under the combined effect of *** has an ionic conductivity of 133.83 mS cm-1at 80°*** addition,the OH-conductivity remains at 89%of the initial value at 80°C and 3 M KOH for 1056 h of *** cell polarization curve based on PTI-PTF50-NOH shows a power density of 734.76 mW cm-2at a current density of 1807.7 mA cm-2.

关键词： Anion exchange membranes Poly(p-terphenylene isatin) Hydrophilic-hydrophobic phase separation Fluorinated group

Design of a cationic accelerator enabling ultrafast ion diffusion kinetics in aqueous zinc-ion batteries

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 377-384页

作者： Yawei Xiao Qianqian Gu Haoyu Li Mengyao Li Yude Wang National Center for International Research on Photoelectric and Energy materials School of Materials and Energy Yunnan University Key Laboratory of Ministry of Education for advanced materials in Tropical Island Resources School of Chemistry and Chemical Engineering Hainan University College of Chemical engineering Fuzhou University Yunnan Key Laboratory of Carbon Neutrality and Green Low-carbon Technologies Yunnan University

Aqueous zinc-ion batteries are highly favored for grid-level energy storage owing to their low cost and high safety,but their practical application is limited by slow ion *** address this,a strategy has been developed to create a cation-accelerating electric field on the surface of the cathode to achieve ultrafast Zn2+diffusion *** employing electrodeposition to coat MoS2on the surface of BaV6O16·3H2O nanowires,the directional built-in electric field generated at the heterointerface acts as a cation accelerator,continuously accelerating Zn2+diffusion into the active *** optimized Zn2+diffusion coefficient in CC@BaV-6O16·3H2O@MoS2(7.5×10～8cm2s-1) surpasses that of most reported V-based ***,MoS2serving as a cathodic armor extends the cycling life of the Zn-CC@BaV6O16·3H2O@MoS2full batteries to over 10000 *** work provides valuable insights into optimizing ion diffusion kinetics for high-performance energy storage devices.

关键词： Internal electric field Cationic accelerator Ion diffusion kinetics Cathode modification strategy Aqueous zinc ion battery

Influence of introducing Zr,Ti,Nb and Ce elements on externally solidified crystals and mechanical properties of high-pressure die-casting Al–Si alloy

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and materials 2025年第1期32卷 147-153页

作者： Junjie Li Wenbo Yu Zhenyu Sun Weichen Zheng Liangwei Zhang Yanling Xue Wenning Liu Shoumei Xiong Center of materials Science and engineering School of Mechanical and Electronic Control EngineeringBeijing Jiaotong UniversityBeijing 100044China Traffic&Transportation engineering Central South UniversityChangsha 410075China Shanghai Synchrotron Radiation Facility Shanghai Advanced Research InstituteChinese Academy of SciencesShanghai 201204China school of materials Science and engineering Tsinghua UniversityBeijing 100084China

High pressure die casting(HPDC)AlSi10Mn Mg alloy castings are widely used in the automobile *** can optimize the mechanical properties of castings through heat treatment,while the release of thermal stress arouses the deformation of large integrated ***,the development of non-heat treatment Al alloys is becoming the hot *** addition,HPDC contains externally solidified crystals(ESCs),which are detrimental to the mechanical properties of *** achieve high strength and toughness of non-heat treatment die-casting Al-Si alloy,we used AlSi9Mn alloy as matrix with the introduction of Zr,Ti,Nb,and *** influences on ESCs and mechanical properties were systematically investigated through three-dimensional reconstruction and thermodynamic *** results reveal that the addition of Ti increased ESCs'size and porosity,while the introduction of Nb refined ESCs and decreased ***,large-sized Al_3(Zr,Ti)phases formed and degraded the mechanical *** introduction of Ce resulted in the poisoning effect and reduced mechanical properties.

关键词： aluminium alloy high-pressure die-casting externally solidified crystals non-heat treatment

维普期刊数据库

Dynamic modeling of a three-dimensional braided composite thin plate considering braiding directions

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2025年第1期46卷 123-138页

作者： Chentong GAO Huiyu SUN Jianping GU W.M.HUANG College of Aerospace engineering Nanjing University of Aeronautics and Astronautics school of Mechanical and Aerospace engineering Nanyang Technological University Jiangsu Key Laboratory of advanced Structural materials and Application Technology School of Materials Science and EngineeringNanjing Institute of Technology

Currently, there are a limited number of dynamic models available for braided composite plates with large overall motions, despite the incorporation of three-dimensional(3D) braided composites into rotating blade components. In this paper, a dynamic model of 3D 4-directional braided composite thin plates considering braiding directions is established. Based on Kirchhoff's plate assumptions, the displacement variables of the plate are expressed. By incorporating the braiding directions into the constitutive equation of the braided composites, the dynamic model of the plate considering braiding directions is obtained. The effects of the speeds, braiding directions, and braided angles on the responses of the plate with fixed-axis rotation and translational motion, respectively, are investigated. This paper presents a dynamic theory for calculating the deformation of 3D braided composite structures undergoing both translational and rotational motions. It also provides a simulation method for investigating the dynamic behavior of non-isotropic material plates in various applications.

关键词：

Unlocking the stable interface in aqueous zinc-ion battery with multifunctional xylose-based electrolyte additives

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 770-778页

作者： Xiaoqin Li Jian Xiang Lu Qiu Xiaohan Chen Yinkun Zhao Yujue Wang Qu Yue Taotao Gao Wenlong Liu Dan Xiao Zhaoyu Jin Panpan Li Institute for advanced Study Chengdu University school of Mechanical engineering Chengdu University College of Food and Biological engineering Chengdu University Institute of Fundamental and Frontier Sciences University of Electronic Science and Technology of China College of materials Science and engineering Sichuan University

The growth of dendrites and the side reactions occurring at the Zn anode pose significant challenges to the commercialization of aqueous Zn-ion batteries（AZIBs）. These challenges arise from the inherent conflict between mass transfer and electrochemical kinetics. In this study, we propose the use of a multifunctional electrolyte additive based on the xylose（Xylo） molecule to address these issues by modulating the solvation structure and electrode/electrolyte interface, thereby stabilizing the Zn anode. The introduction of the additive alters the solvation structure, creating steric hindrance that impedes charge transfer and then reduces electrochemical kinetics. Furthermore, in-situ analyses demonstrate that the reconstructed electrode/electrolyte interface facilitates stable and rapid Zn2+ion migration and suppresses corrosion and hydrogen evolution reactions. As a result, symmetric cells incorporating the Xylo additive exhibit significantly enhanced reversibility during the Zn plating/stripping process, with an impressively long lifespan of up to 1986 h, compared to cells using pure ZnSO4electrolyte. When combined with a polyaniline cathode, the full cells demonstrate improved capacity and long-term cyclic stability. This work offers an effective direction for improving the stability of Zn anode via electrolyte design, as well as highperformance AZIBs.

关键词： Solvation