检索结果-南通市图书馆

Defence Technology（防务技术） 2024年第1期31卷 288-294页

作者： Er-hai An Xiao-xia Li Cun-juan Yu Ying-xin Tan Zi-jun Fan Qing-xia Li Peng Deng Xiong Cao school of environment and safety engineering North University of ChinaTaiyuan030051PR China College of safety and Emergency Management engineering Taiyuan University of Science and TechnologyTaiyuan030024PR China

Fe/N-based biomass porous carbon composite(Fe/N-p Carbon) was prepared by a facile high-temperature carbonization method from biomass,and the effect of Fe/N-p Carbon on the thermal decomposition of energetic molecular perovskite-based material DAP-4 was *** porous carbonaceous materials was considered as the micro/nano support layers for in situ deposition of Fe/N ***/Np Carbon was prepared simply by the high-temperature carbonization *** was found that it showed the inherent catalysis properties for thermal decomposition of *** heat release of DAP-4/Fe/N-p Carbon by DSC curves tested had increased slightly,compared from DAP-4/Fe/N-p *** decomposition temperature peak of DAP-4 at the presence of Fe/N-p Carbon had reduced by 79°C from384.4°C(pure DAP-4) to 305.4°C(DAP-4/Fe/N-p Carbon-3).The apparent activation energy of DAP-4thermal decomposition also had decreased by 29.1 J/*** possible catalytic decomposition mechanism of DAP-4 with Fe/N-p Carbon was proposed.

关键词： Biomass materials Porous carbon DAP-4 Thermal decomposition Facile method

Sn-doped cobalt containing perovskite as the air electrode for highly active and durable reversible protonic ceramic electrochemical cells

在线全文

学校读者我要写书评

暂无评论

Journal of Advanced Ceramics 2024年第1期13卷 63-72页

作者： Min Fu Wenjing Hu Hua Tong Xin Ling Linggui Tan Fanglin Chen Zetian Tao school of Resources Environment and Safety EngineeringUniversity of South ChinaHengyang 421001China Department of Mechanical engineering University of South CarolinaColumbia 29208USA

One potential solution to the problems of energy storage and conversion is the use of reversible protonic ceramic electrochemical cells(R-PCEC),which are based on the solid oxide fuel cell(SOFC)technology and offer a flexible route to the generation of renewable ***,the R-PCEC development faces a range of significant challenges,including slow oxygen reaction kinetics,inadequate durability,and poor round-trip efficiency resulting from the inadequacy of an air *** address these issues,we report novel B-sites doped Pr_(0.5)Ba_(0.5)Co_(0.7)Fe_(0.3)O_(3−δ)(PBCF)with varying amounts of Sn as the air electrode for R-PCEC to further enhance electrochemical performance at lower *** 600℃,R-PCEC with an air electrode consisting of Pr_(0.5)Ba_(0.5)Co_(0.7)Fe_(0.25)Sn_(0.05)O_(3+δ)has achieved peak power density of 1.12 W∙cm^(−2) in the fuel cell mode and current density of 1.79 A∙cm^(−2) in the electrolysis mode at a voltage of 1.3 ***,R-PCECs have shown good stability in the electrolysis mode of 100 *** study presents a practical method for developing durable high-performance air electrodes for R-PCECs.

关键词： triple conducting oxide dual-element doping protonic ceramic electrochemical cells(PCECs) catalytic

Crystal phase control and ignition properties of HNS/CL-20 composite microspheres prepared by microfluidics combined with emulsification techniques

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Particuology 2024年第2期85卷 241-251页

作者： Yi Liu Yunyan Guo Rui Zhu Jinqiang Zhou Zhengxu Lin Kai Han Chongwei An Jingyu Wang Bidong Wu school of environment and safety engineering North University of ChinaTaiyuan030051China school of engineering Beijing Institute of TechnologyBeijing100081China Shanxi Province Ultrafine Powder engineering Technology Research Center Taiyuan030051China

Improved controllability and energy density of ignition agents are of great significance for the devel-opment of energetic composite *** this study,droplet microfluidics and emulsification tech-niques were combined to prepare HNS/CL-20 composite microspheres with polyglycidyl azide polymer(GAP)as the *** influence of binder content on the morphology of microspheres was investi-gated,and the microspheres were characterized and tested for particle size,crystal structure,thermal decomposition,dispersibility,mechanical sensitivity,combustion behavior and detonation *** results showed that microspheres prepared with a binder content of 3%had higher sphericity and particle size *** microspheres retained the crystal structure of both HNS and CL-20(ε-type).Compared with raw HNS,the microspheres had higher apparent activation energy,better safety per-formance,and good *** ignition experiments and detonation performance tests show that HNS/CL-20 composite microspheres have excellent ignition performance,obvious combustion flame,and significant energy release effects,which are expected to achieve high energy and high-speed response of the igniter,thus improving the ignition reliability in special environments or systems.

关键词： Droplet microfluidics Emulsification technology Energetic materials Composite microspheres Crystal phase control Ignition

Preparation and combustion properties of laminated sticks of B-CuO and B-Bi_(2)O_(3)

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第8期38卷 67-74页

作者： Haoyu Song Chenyang Li Fubing Gao Chongwei An Shijiao Li Xuan Zhan Jianchen He school of environment and safety engineering North University of ChinaTaiyuan 030051China Chongqing Military Agency of the Army Chongqing 400060China

To explore the composite process of B-CuO and B-Bi_(2)O_(3) two-component laminated sticks,obtain the corresponding sticks with good printing effect,and explore the energy release *** this study,boron,copper oxide,and bismuth trioxide powders were dispersed in the dispersed phase (DMF) using F_(2602) as a binder,and the construction of two-component B-CuO,B-Bi_(2)O_(3),three-component microcomposite,and three-component macro-composite sticks were realized with the help of double nozzle direct ink writing (DIW) technique *** resulting sticks were ignited by a nichrome wire energized with a direct current,and a high-speed camera system was used to record the combustion behavior of the sticks,mark the flame position,and calculate the rate of *** results showed that the B-CuO stick burning rate (42.11 mm·s^(-1)) was much higher than that of B-Bi_(2)O_(3)(17.84 mm·s^(-1)).The formulation with the highest CuO content (ω_(CuO)=58.7%) in the microscale composite of the sticks also had the fastest burning rate of 60.59 mm·s^(-1),as the CuO content decreased (ω_(CuO)=43.5%,29.3%),its burning rate decreased to 34.78 mm·s^(-1),37.97 mm·s^(-1).The stick with the highest copper oxide content(ω_(CuO)=60%) also possessed the highest burning rate (48.84 mm·s^(-1)) in the macro-composite sticks,and the burning rates of the macro-composite sticks with component spacing of 0.1 mm,0.2 mm,and 0.5 mm were 43.34 mm·s^(-1),48.84 mm·s^(-1),and 40.76 mm·s^(-1).

关键词： Boron-based thermite Direct ink writing Linear burning rate Multi-component composite

A robust triaxial localization method of AE source using refraction path

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Mining Science and Technology 2024年第4期34卷 521-530页

作者： Yichao Rui Jie Chen Jiongkun Chen Jiadong Qiu Zilong Zhou Wenzhong Wang Jinyang Fan State Key Laboratory of Coal Mine Disaster Dynamics and Control Chongqing UniversityChongqing 400044China school of Resources and safety engineering Chongqing UniversityChongqing 400044China school of Resources environment and safety engineering University of South ChinaHengyang 421001China school of Resources and safety engineering Central South UniversityChangsha 410083China Coal Geological Exploration Institute of Gansu Lanzhou 730030China

Acoustic emission(AE)localization algorithms based on homogeneous media or single-velocity are less accurate when applied to the triaxial localization *** the end,a robust triaxial localization method of AE source using refraction path is ***,the control equation of the refraction path is established according to the sensor coordinates and arrival ***,considering the influence of time-difference-of-arrival(TDOA)errors,the residual of the governing equation is calculated to estimate the equation ***,the refraction points in different directions are solved using Snell’s law and orthogonal ***,the source coordinates are iteratively solved by weighted correction *** feasibility and accuracy of the proposed method are verified by pencil-lead breaking *** simulation results show that the new method is almost unaffected by the refraction ratio,and always holds more stable and accurate positioning performance than the traditional method under different ratios and scales of TDOA outliers.

关键词： Acoustic emission(AE) Source localization Robust method Refraction paths Weight estimations

Effects of counter-current driven by electron cyclotron waves on neoclassical tearing mode suppression

在线全文

学校读者我要写书评

暂无评论

Chinese Physics B 2024年第5期33卷 501-509页

作者：高钦郑平卫 school of Resource environment and safety engineering University of South ChinaHengyang 421001China Demonstration Base for International Science and Technology Cooperation on Nuclear Energy and Nuclear safety University of South ChinaHengyang 421001China

Through theoretical analysis,we construct a physical model that includes the influence of counter-external driven current opposite to the plasma current direction in the neoclassical tearing mode(NTM).The equation is used with this model to obtain the modified Rutherford equation with co-current and counter-current *** with the reported experimental results,numerical simulations have shown that the localized counter external current can only partially suppress NTM when it is far from the resonant magnetic *** some circumstances,the Ohkawa mechanism dominated current drive(OKCD)by electron cyclotron waves can concurrently create both co-current and *** this instance,the minimal electron cyclotron wave power that suppresses a particular NTM was calculated by the Rutherford *** result is marginally less than when taking co-current alone into *** a result,to suppress NTM using OKCD,one only needs to align the co-current with a greater OKCD peak well with the resonant magnetic *** effect of its lower counter-current does not need to be considered because the location of the counter-current deviates greatly from the resonant magnetic surface.

关键词： driven current neoclassical tearing mode modified Rutherford equation electron cyclotron waves

Controllable fabrication of FeCoS_(4) nanoparticles/S-doped bowl-shaped hollow carbon as efficient lithium storage anode

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Chemical engineering 2024年第3期67卷 78-88页

作者： Ming Zhou Mengrong Wu Haiwei Yu Xiangjun Zheng Kuan Shen Xingmei Guo Yuanjun Liu Fu Cao Hongxing Gu Qinghong Kong Junhao Zhang school of environmental and Chemical engineering Jiangsu University of Science and TechnologyZhenjiang 212003China Jiangsu Hengshen Co. LtdZhenjiang 212314China school of the environment and safety engineering Jiangsu UniversityZhenjiang 212013China

To address the low conductivity and easy agglomeration of transition metal sulfide nanoparticles,FeCoS_(4) nanoparticles embedded in S-doped hollow carbon(FeCoS_(4)@S-HC)composites were successfully fabricated through a combination of hydrothermal processes and sulfidation *** unique bowlshaped FeCoS_(4)/S-HC composites exhibit excellent structural stability with a high specific surface area of 303.7 m^(2)·g^(-1) and a pore volume of 0.93 cm^(3)·g^(-1).When applied as anode material for lithium-ion batteries,the FeCoS_(4)@S-HC anode exhibits efficient lithium storage with high reversible specific capacity(970.2 mA·h·g^(-1) at 100 mA·g^(-1))and enhanced cycling stability(574 mA·h·g^(-1) at 0.2 A·g^(-1) after 350 cycles,a capacity retention of 84%).The excellent lithium storage is attributed to the fact that the bimetallic FeCoS_(4) nanoparticles with abundant active sites can accelerate the electrochemical reaction kinetics,and the bowl-shaped S-HC structure can provide a stable mechanical structure to suppress volume expansion.

关键词： Bimetallic sulfides Bowl-shaped hollow carbon S doping Buffering volume expand Lithium-ion batteries

Manipulating Nb-doped SrFeO_(3−δ)with excellent performance for proton-conducting solid oxide fuel cells

在线全文

学校读者我要写书评

暂无评论

Journal of Advanced Ceramics 2024年第5期13卷 579-589页

作者： Hailu Dai Hongzhe Du Samir Boulfrad Shoufu Yu Lei Bi Qinfang Zhang school of Materials Science and engineering Yancheng Institute of TechnologyYancheng 224051China College of Science&engineering Hamad Bin Khalifa UniversityDoha 34110Qatar school of Resource environment and safety engineering University of South ChinaHengyang 421001China

Nb-doped SrFeO_(3−δ)(SFO)is used as a cathode in proton-conducting solid oxide fuel cells(H-SOFCs).First-principles calculations show that the SrFe0.9Nb0.1O_(3−δ)(SFNO)cathode has a lower energy barrier in the cathode reaction for H-SOFCs than the Nb-free SrFeO_(3−δ)*** experimental studies show that Nb doping substantially enhances the performance of the SrFeO_(3−δ)***,oxygen vacancies(VO)were introduced into SFNO using the microwave sintering method,further improving the performance of the SFNO *** mechanism behind the performance improvement owing to VO was revealed using first-principles calculations,with further optimization of the SFNO cathode achieved by developing a suitable wet chemical synthesis route to prepare nanosized SFNO *** method significantly reduces the grain size of SFNO compared with the conventional solid-state reaction method,although the solid-state reaction method is generally used for preparing Nb-containing *** a result of defect engineering and synthesis approaches,the SFNO cathode achieved an attractive fuel cell performance,attaining an output of 1764 mW·cm−2 at 700℃ and operating for more than 200 *** manipulation of Nb-doped SrFeO_(3−δ)can be seen as a“one stone,two birds”strategy,enhancing cathode performance while retaining good stability,thus providing an interesting approach for constructing high-performance cathodes for H-SOFCs.

关键词： SrFeO_(3−δ)-(SFO) cathode proton conductor solid oxide fuel cells(SOFCs)

Process and performance of DAAF microspheres prepared by continuous integration from synthesis to spherical coating based on microfluidic system

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第2期32卷 629-643页

作者： Bidong Wu Jiahui Shi Mengsen Wei Rui Zhu Yi Liu Jinqiang Zhou Chongwei An Jingyu Wang school of environment and safety engineering North University of ChinaTaiyuan 030051China Shanxi engineering Technology Research Centre for Ultrafine Powder North University of ChinaTaiyuan 030051China school of Mechatronical engineering Beijing Institute of TechnologyBeijing 100081China

In order to improve the energy output consistency of 3, 3’-diamino-4, 4’-azoxyfurazan(DAAF) in the new insensitive booster and the safety and efficiency in the preparation process, a continuous preparation system of DAAF from synthesis to spherical coating was designed and established in this paper, which combined ultrasonic micromixing reaction with microdroplet globular template. In the rapid micromixing stage, the microfluidic mixing technology with ultrasonic was used to synergistically strengthen the uniform and rapid mass transfer mixing reaction between raw materials to ensure the uniformity of DAAF particle nucleation-growth, and to prepare high-quality DAAF crystals with uniform structure and morphology and concentrated particle size distribution. In the microdroplet globular template stage, the microfluidic droplet technology was used to form a droplet globular template with uniform size under the shear action of the continuous phase of the dispersed phase solution containing DAAF particles and binder. The size of the droplet template was controlled by adjusting the flow rate ratio between the continuous phase and the dispersed phase. In the droplet globular template, with the diffusion of the solvent in the dispersed phase droplets, the binder precipitates to coat the DAAF into a ball, forming a DAAF microsphere with high sphericity, narrow particle size distribution and good monodispersity. The problem of discontinuity and DAAF particle suspension in the process was solved, and the coating theory under this process was studied. DAAF was coated with different binder formulations of fluororubber(F2604), nitrocellulose(NC) and NC/glycidyl azide polymer(GAP), and the process verification and evaluation of the system were carried out. The balling effects of large, medium and small droplet templates under different binder formulations were studied. The scanning electron microscope(SEM) results show that the three droplet templates under the three binder formul

关键词： DAAF Micromixing technology Microdroplet technology Synthesis Spherical coating Continuousization

Strong metal-support interaction between AuPd nanoparticles and oxygen-rich defect ZrO_(2) for enhanced catalytic 5-hydroxymethylfurfural oxidation

在线全文

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2024年第2期35卷 507-511页

作者： Yunlei Zhang Yiran Liu Wen Guan Mengxue Cao Yao Chen Pengwei Huo Institute of Green Chemistry and Chemical Technology School of Chemistry and Chemical EngineeringJiangsu UniversityZhenjiang 212013China school of the environment and safety Jiangsu UniversityZhenjiang 212013China

The unique properties of metal oxide surfaces,crystal surfaces and defects play vital roles in biomass upgrading *** this work,hierarchical porous bowl-shaped ZrO_(2)(HB-ZrO_(2))with mixed crystal phase was designed and employed as the support for loading AuPd bimetal with different proportions to synthesize AuPd/HB-ZrO_(2) *** effects of surface chemistry,oxygen defects,bimetal interaction and metal-support interaction of AuPd/HB-ZrO_(2) on catalytic performance for the selective oxidation of 5-hydroxymethylfurfural(HMF)to 2,5-furandicarboxylic acid(FDCA)were systematically *** Au 2 Pd1/HB-ZrO_(2) catalyst afforded a satisfactory FDCA yield of 99.9%from HMF oxidation using O_(2) as the oxidant in water,accompanied with an excellent FDCA productivity at 97.6 mmol g^(−1) h^(−1).This work offers fresh insights into rationally designing efficient catalysts with oxygen-rich defects for the catalytic upgrading of biomass platform chemicals.

关键词： 5-Hydroxymethylfurfural oxidation 2,5-Furandicarboxylic acid Oxygen-rich defect ZrO_(2) AuPd bimetal Bowl-shaped structure