检索结果-南通市图书馆

Advanced preparation and application of bimetallic materials in lithium-sulfur batteries:A review

Journal of Energy Chemistry 2024年第1期88卷 469-512,I0011页

作者： Yongbing Jin Nanping Deng Yanan Li Hao Wang Meiling Zhang Weimin Kang Bowen Cheng State Key Laboratory of Separation Membranes and Membrane Processes/National Center for International Joint Research on Separation Membranes School of Textile Science and EngineeringTiangong UniversityTianjin 300387China

Lithium-sulfur(Li-S)batteries are considered highly promising as next-generation energy storage systems due to high theoretical capacity(2600 Wh kg^(-1))and energy density(1675 mA h g^(-1))as well as the abundant natural reserves,low cost of elemental sulfur,and environmentally friendly ***,several challenges impede its commercialization including low conductivity of sulfur itself,the severe“shuttle effect”caused by lithium polysulfides(LiPSs)during charge–discharge processes,volume expansion effects and sluggish reaction *** a solution,polar metal particles and their compounds have been introduced as the main hosts for sulfur cathode due to their robust catalytic activity and adsorption capability,effectively suppressing the“shuttle effect”of Li *** alloys and their compounds with multi-functional properties exhibit remarkable electrochemical performance more readily when compared to single-metal ***-designed bimetallic materials demonstrate larger specific surface areas and richer active sites,enabling simultaneous high adsorption capability and strong catalytic *** synergistic effect of the“adsorption-catalysis”sites accelerates the adsorptiondiffusion-conversion process of Li PSs,ultimately achieving a long-lasting Li-S ***,the latest progress and performance of bimetallic materials in cathodes,separators,and interlayers of Li-S batteries are systematically ***,the principles and challenges of Li-S batteries are briefly ***,various mechanisms for suppressing“shuttle effects”of Li PSs are emphasized at the ***,the performance parameters of various bimetallic materials are comprehensively summarized,and some improvement strategies are proposed based on these ***,the future prospects of bimetallic materials are discussed,with the hope of providing profound insights for the rational design and manufacturing of high-performance bimetallic materia

关键词： Bimetallic materials Lithium-sulfur batteries Effectively suppress shuttle effect of LiPSs Significantly improve reaction kinetics Exceptionally long lifespan

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Symmetrization of quasi-regular patterns with periodic tilting of regular polygons

引用

Computational Visual Media 2024年第3期10卷 559-576页

作者： Zhengzheng Yin Yao Jin Zhijian Fang Yun Zhang Huaxiong Zhang Jiu Zhou Lili He school of Computer Science and Technology Zhejiang Sci-Tech UniversityHangzhou 310018China Zhejiang Provincial Innovation Center of Advanced textile Technology Shaoxing 312000China school of Media Engineering Communication University of ZhejiangHangzhou 310018China

Computer-generated aesthetic patterns arewidely used as design materials in various fields. Themost common methods use fractals or dynamicalsystems as basic tools to create various patterns. Toenhance aesthetics and controllability, some researchershave introduced symmetric layouts along with thesetools. One popular strategy employs dynamical systemscompatible with symmetries that construct functionswith the desired symmetries. However, these aretypically confined to simple planar symmetries. Theother generates symmetrical patterns under theconstraints of tilings. Although it is slightly moreﬂexible, it is restricted to small ranges of tilingsand lacks textural variations. Thus, we proposed anew approach for generating aesthetic patterns bysymmetrizing quasi-regular patterns using general kuniformtilings. We adopted a unified strategy toconstruct invariant mappings for k-uniform tilings thatcan eliminate texture seams across the tiling ***, we constructed three types of symmetriesassociated with the patterns: dihedral, rotational, andreﬂection symmetries. The proposed method can beeasily implemented using GPU shaders and is highlyefficient and suitable for complicated tiling with regularpolygons. Experiments demonstrated the advantages of our method over state-of-the-art methods in terms ofﬂexibility in controlling the generation of patterns withvarious parameters as well as the diversity of texturesand styles.

关键词： quasi-regular patterns(QRP) k-uniform tilings invariant mappings symmetry aesthetic patterns

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Revolutionizing digital healthcare networks with wearable strain sensors using sustainable fibers

引用

SusMat 2024年第4期4卷 104-151页

作者： Junze Zhang Bingang Xu Kaili Chen Yi Li Gang Li Zekun Liu Nanotechnology Center School of Fashion and TextilesThe Hong Kong Polytechnic UniversityKowloonHong KongChina Department of materials Imperial College LondonLondonUK Department of materials University of ManchesterManchesterUK National Engineering Laboratory for Modern Silk College of Textile and Clothing EngineeringSoochow UniversitySuzhouChina Botnar Research Center University of OxfordOxfordUK

Wearable strain sensors have attracted research interest owing to their poten-tial within digital healthcare,offering smarter tracking,efficient diagnostics,and lower *** rigid sensors,fiber-based ones compete with their flexibility,durability,adaptability to body structures as well as eco-friendliness to ***,the sustainable fiber-based wearable strain sensors for digital health are reviewed,and material,fabrication,and practical healthcare aspects are *** strain sensors predicated on various sensing modalities,be it resistive,capacitive,piezoelectric,or triboelectric,are explained and analyzed according to their strengths and weaknesses toward fabrication and *** applications in digital healthcare spanning from body area sensing networks,intelligent health management,and medical rehabilitation to mul-tifunctional healthcare systems are also ***,to create a more complete digital health network,wired and wireless methods of data collec-tion and examples of machine learning are elaborated in ***,the prevailing challenges and prospective insights into the advancement of novel fibers,enhancement of sensing precision and wearability,and the establishment of seamlessly integrated systems are critically summarized and *** endeavor not only encapsulates the present landscape but also lays the founda-tion for future breakthroughs in fiber-based wearable strain sensor technology within the domain of digital health.

关键词： advanced fibers digital health flexible electronics strain sensors wearables

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

3D core-shell nanofibers framework and functional ceramic nanoparticles synergistically reinforced composite polymer electrolytes for high-performance all-solid-state lithium metal battery

引用

Chinese Chemical Letters 2024年第8期35卷 425-432页

作者： Hengying Xiang Nanping Deng Lu Gao Wen Yu Bowen Cheng Weimin Kang State Key Laboratory of Separation Membranes and Membrane Processes Tiangong UniversityTianjin 300387China school of textile Science and Engineering Tiangong UniversityTianjin 300387China

Satisfactory ionic conductivity,excellent mechanical stability,and high-temperature resistance are the prerequisites for the safe application of solid polymer electrolytes(SPEs)in all-solid-state lithium metal batteries(ASSLMBs).In this study,a novel poly(m-phenylene isophthalamide)(PMIA)-core/poly(ethylene oxide)(PEO)-shell nanofiber membrane and the functional Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)(LLZTO)ceramic nanopar-ticle are simultaneously introduced into the PEO-based SPEs to prepare composite polymer electrolytes(CPEs).The core PMIA layer of composite nanofibers can greatly improve the mechanical strength and thermal stability of the CPEs,while the shell PEO layer can provide the 3D continuous transport channels for lithium *** addition,the introduction of functional LLZTO nanoparticle not only reduces the crys-tallinity of PEO,but also promotes the dissociation of lithium salts and releases more Li^(+)ions through its interaction with the Lewis acid-base of anions,thereby overall improving the transport of lithium ***,the optimized CPEs present high ionic conductivity of 1.38×10^(−4)S/cm at 30℃,signifi-cantly improved mechanical strength(8.5 MPa),remarkable thermal stability(without obvious shrinkage at 150℃),and conspicuous Li dendrites blocking ability(>1800 h).The CPEs also both have good com-patibility and cyclic stability with LiFePO_(4)(>2000 cycles)and high-voltage LiNi_(0.8)Mn_(0.1)Co_(0.1)O_(2)(NMC811)(>500 cycles)*** addition,even at low temperature(40℃),the assembled LiFePO4/CPEs/Li bat-tery still can cycle *** novel design can provide an effective way to exploit high-performance solid-state electrolytes.

关键词： Composite polymer electrolytes Core-shell structured nanofiber Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)ceramic nanoparticle All-solid-state lithium metal batteries Outstanding thermal stability and electrochemical performance

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Targeted regeneration and upcycling of spent graphite by defect‐driven tin nucleation

引用

Carbon Energy 2024年第4期6卷 91-103页

作者： Zhiheng Cheng Zhiling Luo Hao Zhang Wuxing Zhang Wang Gao Yang Zhang Long Qie Yonggang Yao Yunhui Huang Kun Kelvin Fu State Key Laboratory of materials Processing and Die&Mould Technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhanChina Key Laboratory of Automobile materials(Jilin University) Ministry of EducationDepartment of Materials Science and EngineeringJilin UniversityChangchunChina Electronic materials Research Laboratory(Key Lab of Education Ministry) School of Electronic and Information Engineeringand Instrumental Analysis CenterXi'an Jiaotong UniversityXi'anChina Department of Mechanical Engineering University of DelawareNewarkUSA

The recycling of spent batteries has become increasingly important owing to their wide applications,abundant raw material supply,and sustainable *** with the degraded cathode,spent anode graphite often has a relatively intact structure with few defects after long ***,most spent graphite is simply burned or discarded due to its limited value and inferior performance on using conventional recycling methods that are complex,have low efficiency,and fail in performance ***,we propose a fast,efficient,and“intelligent”strategy to regenerate and upcycle spent graphite based on defect‐driven targeted *** Sn as a nanoscale healant,we used rapid heating(~50 ms)to enable dynamic Sn droplets to automatically nucleate around the surface defects on the graphite upon cooling owing to strong binding to the defects(~5.84 eV/atom),thus simultaneously achieving Sn dispersion and graphite *** a result,the regenerated graphite showed enhanced capacity and cycle stability(458.9 mAh g^(−1) at 0.2 A g^(−1) after 100 cycles),superior to those of commercial *** from the self‐adaption of Sn dispersion,spent graphite with different degrees of defects can be regenerated to similar structures and *** analysis indicates that targeted regeneration and upcycling have significantly lower energy consumption(~99%reduction)and near‐zero CO_(2) emission,and yield much higher profit than hydrometallurgy,which opens a new avenue for direct upcycling of spend graphite in an efficient,green,and profitable manner for sustainable battery manufacture.

关键词： battery recycling spent graphite targeted regeneration upcycling graphite

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Self-cleaning SERS sensor based on flexible Ni_(3)S_(2)/MoS_(2)@Ag@PDMS composites for label-free multiplex volatile organic compounds detection

引用

Nano Research 2024年第6期17卷 5529-5539页

作者： Xinyue Song Yongzheng Zhang Xiaohui Ren Dongyan Tang Xuelin Zhang Xin Li MIIT Key Laboratory of Critical materials Technology for New Energy Conversion and Storage School of Chemistry and Chemical EngineeringState Key Lab of Urban Water Resource and EnvironmentHarbin Institute of TechnologyHarbin 150090China College of textile and Clothing Yancheng Institute of TechnologyYancheng 224051China MEMS Center Harbin Institute of TechnologyHarbin 150001China

Flexible self-cleaning surface-enhanced Raman scattering(SERS)sensors are highly desirable for the detection of various environmental pollutants,including volatile organic compounds(VOCs).However,achieving sensitive detection without labeling and ensuring efficient cyclic use remain significant ***,we introduce a direct approach to create a versatile Ni_(3)S_(2)/MoS_(2)@Ag@PDMS(PDMS=polydimethylsiloxane)composite SERS substrate using chemical vapor deposition *** produced substrate shows outstanding performance,offering extremely low detection sensitivity(1.0×10^(−12)M 4-aminobenzenethiol)and high enhancement factors(approximately 107).The interactions between the rod-shaped Ni_(3)S_(2)/MoS_(2)@Ag heterostructure and the molecules facilitate the transfer of charge,resulting in an increased electric field enhancement of the exciton *** has the dual benefit of providing a self-cleaning effect and enhancing SERS ***,the substrate enables sensitive detection of VOCs gas molecules without the need for labels,achieving a minimum detectable concentration as low as 1 ppm for o-dichlorobenzene,due to the preconcentration effect of *** calculations further explain the combined effect of electromagnetic and chemical enhancement in this composite *** utilizing the developed visual SERS barcode,quick multiple detection and analysis of mixtures can be *** flexible and versatile SERS technique has significant potential for on-site detection and analysis of environmental pollutants,opening the doors for the development of a wearable in-situ SERS sensing platform.

关键词： surface-enhanced Raman scattering(SERS) quantitative detection recyclable detection volatile organic compounds(VOCs) chemical vapor deposition(CVD)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nanostructured ZnO/ZnS with Type-II Hetero-junction for Efficient CO_(2) Photoreduction

引用

Chemical Research in Chinese Universities 2024年第3期40卷 484-489页

作者： XIAO Qi LIU Ting ZHOU Qianhe LI Liangyu CHANG Chuntao GAO Dawei LI Danyang YOU Feifei school of textile Garment and Design Changshu Institute of TechnologyChangshu 215500P.R.China school of Civil and Environmental Engineering The University of New South WalesAustralia College of textile and Clothing Yancheng Institute of Technology.Yancheng 224051P.R.China Jiangsu Yueda Cotton Spinning Co. Ltd.Yancheng 224051P.R.China

Photocatalytic CO_(2) reduction driven by solar light is a green approach that can decrease the greenhouse effect induced by high CO_(2) concentration in the atmosphere and generate carbon-based chemicals/fuels as *** this paper,non-metal co-catalysts ZnO/ZnS type-II hetero-junction nanoparticles with a rough surface were prepared through a hydrothermal *** used as a photocatalyst for CO_(2) reduction,the optimal one showed good cycle stability and a higher yield rate of 27.8µmol·g^(−1)·h^(−1) for CO_(2) conversion into *** outstanding catalytic activity originated from i)the rich interfaces between ZnO and ZnS in the nanoscale could significantly reduce the delivery path of carriers and improve the utilization efficiency of photo-excited electron/hole pairs and ii)enriched surface oxygen defects could supply much more reaction active sites for CO_(2) adsorption.

关键词： ZnO/ZnS Photocatalytic CO_(2)reduction Oxygen defect

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Solvent-Resistant Wearable Triboelectric Nanogenerator for Energy-Harvesting and Self-Powered Sensors

引用

Energy & Environmental materials 2024年第5期7卷 380-390页

作者： Yongtao Yu Yuelin Yu Hongyi Wu Tianshuo Gao Yi Zhang Jiajia Wu Jiawei Yan Jian Shi Hideaki Morikawa Chunhong Zhu Graduate school of Medicine Science and Technology Shinshu University Institute for Fiber Engineering (IFES) Interdisciplinary Cluster for Cutting Edge Research (ICCER) Shinshu University Faculty of textile Science and Technology Shinshu University

Wearable triboelectric nanogenerators （TENGs） have attracted attention owing to their ability to harvest energy from the surrounding environment without maintenance. Herein, polyetherimide–Al2O3（PAl） and polyvinylidene fluoride-co-hexafluoropropylene （PVDF-HFP, PH） nanofiber membranes were used as tribo-positive and tribo-negative materials, respectively. Phytic aciddoped polyaniline （PANI）/cotton fabric （PPCF） and ethylenediamine （EDA）-crosslinked PAl （EPAl） nanofiber membranes were used as triboelectrode and triboencapsulation materials, respectively. The result showed that when the PAl–PH-based TENG was shaped as a circle with a radius of 1 cm, under the pressure of 50 N, and the frequency of 0.5 Hz, the open-circuit voltage (Voc)and short-circuit current (Isc) reached the highest value of 66.6 V and-93.4to 110.1 nA, respectively. Moreover, the PH-based TENG could be used as a fabric sensor to detect fabric composition and as a sensor-inductive switch for light bulbs or beeping warning devices. When the PAl–PH-based TENG was shaped as a 5×5 cm2rectangle, a 33μF capacitor could be charged to15 V in 28 s. Interestingly, compared to PAl nanofiber membranes, EPAl nanofiber membranes exhibited good dyeing properties and excellent solvent resistance. The PPCF exhibited <5%resistance change after washing,bending, and stretching.

关键词： energy-harvesting power supply sensors solvent-resistant wearable triboelectric nanogenerator

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Carbon coated LaFe_(0.92)Pd_(0.08)O_(3) composites for catalytic transfer hydrogenation:Balance in the ability of substrates adsorption and conversion

引用

Nano Research 2024年第5期17卷 3724-3732页

作者： Bowen Wang Nan Zhang Ping Xiao Jian Zhang Sónia A.C.Carabineiro Junjiang Zhu Hubei Key Laboratory of Biomass Fibers and Eco-dyeing&Finishing College of Chemistry and Chemical EngineeringWuhan Textile UniversityWuhan 430200China College of Chemistry and materials Engineering Wenzhou UniversityWenzhou 325035China LAQV-REQUIMTE Department of ChemistryNOVA School of Science and TechnologyUniversidade NOVA de LisboaLargo da Torre2829-516 CaparicaPortugal

Catalytic transfer hydrogenation(CTH)is a green and efficient pathway for selective hydrogenation of unsaturated aldehydes and ***,managing the abilities of solid catalysts to adsorb substrates and to convert them into desired products is a challenging ***,we report the synthesis of carbon coated LaFe_(0.92)Pd_(0.08)O_(3) composites(LFPO-8@C)for CTH of benzaldehyde(BzH)into benzyl alcohol(BzOH),using isopropanol(IPA)as hydrogen *** coating with carbon improves the ability to adsorb/transfer reactants from solution to active sites,and the doping of Pd2+at Fe3+site strengthens the ability of LaFeO_(3) to convert BzH into BzOH.A balanced point between them(i.e.,abilities to adsorb BzH and to convert BzH into BzOH)is obtained at LFPO-8@C,which exhibits a BzOH formation rate of 3.88 mmol·gcat^(-1)·h^(-1) at 180℃ for 3 h,which is 1.50 and 2.72 times faster than those of LFPO-8 and LaFeO_(3)@C.A reaction mechanism is proposed,in which the acidic sites(e.g.,Fe^(4+),oxygen vacancy)are used for the activation of C=O bond of BzH and O-H bond of IPA,and the basic sites(e.g.,lattice oxygen)for the activation ofα-H(O-H)bond of IPA.

关键词： LaFe_(0.92)Pd_(0.08)O_(3) porous carbon catalytic transfer hydrogenation isopropanol reaction mechanism

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Intelligent 3D garment system of the human body based on deep spiking neural network

引用

虚拟现实与智能硬件（中英文） 2024年第1期6卷 43-55页

作者： Minghua JIANG Zhangyuan TIAN Chenyu YU Yankang SHI Li LIU Tao PENG Xinrong HU Feng YU school of Computer and Artificial Intelligence Wuhan Textile UniversityWuhan 430200China Engineering Research Center of Hubei Province for Clothing Information Wuhan 430200China

Background Intelligent garments,a burgeoning class of wearable devices,have extensive applications in domains such as sports training and medical ***,existing research in the smart wearables domain predominantly emphasizes sensor functionality and quantity,often skipping crucial aspects related to user experience and *** To address this gap,this study introduces a novel real-time 3D interactive system based on intelligent *** system utilizes lightweight sensor modules to collect human motion data and introduces a dual-stream fusion network based on pulsed neural units to classify and recognize human movements,thereby achieving real-time interaction between users and ***,the system incorporates 3D human visualization functionality,which visualizes sensor data and recognizes human actions as 3D models in real time,providing accurate and comprehensive visual feedback to help users better understand and analyze the details and features of human *** system has significant potential for applications in motion detection,medical monitoring,virtual reality,and other *** accurate classification of human actions contributes to the development of personalized training plans and injury prevention *** This study has substantial implications in the domains of intelligent garments,human motion monitoring,and digital twin *** advancement of this system is expected to propel the progress of wearable technology and foster a deeper comprehension of human motion.

关键词： Intelligent garment system Internet of things Human action recognition Deep learning 3D visualization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：