检索结果-南通市图书馆

Energy and exergy analyses and optimizations for two-stage TEC driven by two-stage TEG with Thomson effect

Science China(Technological Sciences) 2024年第4期67卷 1077-1093页

作者： CHEN LinGen GE YanLin FENG HuiJun REN TingTing institute of Thermal Science and Power engineering Wuhan Institute of TechnologyWuhan 430205China Hubei Provincial engineering technology Research Center of Green Chemical Equipment Wuhan 430205China school of mechanical&electrical engineering Wuhan Institute of TechnologyWuhan 430205China

Based on the non-equilibrium thermodynamics and energy and exergy analyses,a thermodynamic model of two-stage thermoelectric(TE)cooler(TTEC)driven by two-stage TE generator(TTEG)(TTEG-TTEC)combined TE device is established with involving Thomson effect by fitting method of variable physical parameters of TE *** total number of TE elements as constraint,influences of number distributions of TE elements on three device performance indictors,that is,cooling load,maximum COP and maximum exergetic efficiency,are *** number distributions of TE elements are optimized with three maximum performance indictors as the objectives,*** of hot-junction temperature of TTEG and coldjunction temperature of TTEC on optimization results are analyzed,and difference between optimization results corresponding to three performance indicators are *** performance intervals and optimal variable intervals are *** of Thomson effect on three general performance indicators,three optimal performance indicators and optimal variables are comparatively *** effect reduces three general performance indicators and three optimal performance indicators of *** hot-and cold-junction temperatures of TTEG and TTEC are 450,305,325 and 295 K,respectively,Thomson effect reduced maximum cooling load,maximum COP and maximum exergetic efficiency from 9.528 W,9.043×10^(-2)and2.552%to 6.651 W,6.286×10^(-2)and 1.752%,respectively.

关键词： non-equilibrium thermodynamics cooling load COP exergetic efficiency combined thermoelectric device performance optimization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Constructal design of a rectangular porous fin considering minimization of maximum temperature difference and pumping power consumption

引用

Science China(Technological Sciences) 2024年第3期67卷 919-929页

作者： LIU XiaoYe FENG HuiJun CHEN LinGen GE YanLin institute of Thermal Science and Power engineering Wuhan Institute of TechnologyWuhan 430205China College of Power engineering Naval University of EngineeringWuhan 430033China Hubei Provincial engineering technology Research Center of Green Chemical Equipment Wuhan 430205China school of mechanical&electrical engineering Wuhan Institute of TechnologyWuhan 430205China

A heat dissipation model of a rectangular porous fin is established based on constructal theory. First, the constructal design of rectangular porous fin is conducted by selecting a complex function minimization, which composed of linear weighting sum of maximum temperature difference and pumping power consumption, as optimization objective. Effects of gap height, air inlet velocity, total porous fin volume and porosity on the optimal constructs are investigated, respectively. The findings show that the complex function can attain its double minimum at a value of 0.802 when the fin length and number are optimized, and the corresponding optimal fin length and number are 8.01 mm and 10, respectively. In comparison to original design, the complex function and maximum temperature difference after twice optimization are decreased by 19.80% and 66.31%, ***, the comprehensive performance of porous fin is improved by simultaneously optimizing the fin length and number. The artificial neural network is applied to predict the fin performances, which is used to conduct multi-objective optimization based on NSGA-II algorithm. Optimal structure of porous fin for multiple requirements is gained by LINMAP and TOPSIS decisionmaking strategies. The findings in this study can serve as theoretical guides for fin thermal designs of electronic devices.

关键词： constructal theory rectangular porous fin pumping power consumption maximum temperature difference complex function multi-objective optimization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Constructal design of a rectangular parallel phase change microchannel in a three-dimensional electronic device

引用

Science China(Technological Sciences) 2024年第5期67卷 1381-1390页

作者： ZHANG JiWen FENG HuiJun CHEN LinGen GE YanLin institute of Thermal Science and Power engineering Wuhan Institute of TechnologyWuhan430205China College of Power engineering Naval University of EngineeringWuhan430033China Hubei Provincial engineering technology Research Center of Green Chemical Equipment Wuhan430205China school of mechanical&electrical engineering Wuhan Institute of TechnologyWuhan430205China

Based on constructal theory,a rectangular parallel phase change microchannel model in a three-dimensional electronic device(TDED)is established with R134a as the cooling *** on the minimization of a complex function(CF)composed of linear weighting sum of maximum temperature difference and pumping power consumption,constructal design of the TDED is conducted first;and then,maximum temperature difference and pumping power consumption are minimized by non-dominated sorting genetic algorithm-II *** results reveal that there exist an optimal mass flow rate(0.0012 kg/s)and a quadratic optimal aspect ratio(AR)(0.39)of the microchannel which lead to quadratic minimum CF(0.817).Compared with the original value,the CF after optimization is reduced by 18.34%.Reducing the inlet temperature of cooling fluid and microchannel number appropriately can help to enhance the overall performance of *** using the artificial neural network and genetic algorithms in the toolboxes of Matlab software,the optimal AR gained in the Pareto solution set is located between 0.2–*** smallest deviation index among three discussed strategies is 0.346,and the corresponding optimal AR is 0.413,which is selected as the optimal design strategy of the microchannel in the TDED under multiple *** findings in this study can serve as theoretical guides for thermal designs of electronic devices.

关键词： constructal theory parallel microchannel evaporation phase change three-dimensional electronic device multi-objective optimization artificial neural network

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Minimum mass-entransy dissipation profile for one-way isothermal diffusive mass-transfer process with mass-resistance and massleakage

引用

Science China(Technological Sciences) 2024年第8期67卷 2427-2435页

作者： CHEN LinGen XIA ShaoJun institute of Thermal Science and Power engineering Wuhan Institute of TechnologyWuhan 430205China school of mechanical Electrical EngineeringWuhan Institute of TechnologyWuhan 430205China school of Power engineering Naval University of EngineeringWuhan 430033China

As a new concept,mass-entransy is one of the twins in the core of entransy *** can describe mass-transfer ability for masstransfer processes(MTPes),just as thermal-entransy for describing heat-transfer ***,mass-entransy dissipation can be utilized to evaluate the loss of mass-transfer *** mass-entransy dissipation(MMED) is utilized to optimize one-way isothermal diffusive MTPes with mass-leakage and mass-transfer law(g ∝ Δ(c),where c means concentration).For a given net amount of mass-transferred key components at the low-concentration side,optimality-condition for the MMED of isothermal diffusive MTPes is obtained by using the *** of the amount of mass-transferred and mass-leakage on optimal results are analyzed,and the obtained optimization profiles are compared with those for MTP profiles of constant-concentration-difference(c_1-c_2=const) and constant-concentration-ratio(c_1/c_2=const).The product of square of key-component-concentration(KCC) difference between high-and low-concentration sides and inert component concentration at high-concentration side for the MMED of the MTP with no mass-leakage is a constant,and the optimal relationship of the KCCs between high-and low-concentration sides with mass-leakage is significantly different from the *** mass-leakage is relatively small,the MTP with c_1-c_2=const strategy is superior to that with c_1/c_2=const strategy,and the latter is superior to the former with an increase in mass-leakage.A combination of mass-entransy concept,finite-time thermodynamics,and averaged-optimization-method is a meaningful tool for optimizing MTPes.

关键词： diffusive mass-transfer-law mass-leakage one-way isothermal mass-transfer minimum mass-entransy dissipation finite-time thermodynamics averaged-optimization-method

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Constructal design of printed circuit recuperator for S-CO_(2)cycle via multi-objective optimization algorithm

引用

Science China(Technological Sciences) 2024年第1期67卷 285-294页

作者： DAN ZhiSong FENG HuiJun CHEN LinGen LIAO NaiBing GE YanLin institute of Thermal Science and Power engineering Wuhan Institute of TechnologyWuhan 430205China College of Power engineering Naval University of EngineeringWuhan 430033China Hubei Provincial engineering technology Research Center of Green Chemical Equipment Wuhan 430205China school of mechanical&electrical engineering Wuhan Institute of TechnologyWuhan 430205China AECC Hunan Aviation Powerplant Research institute Zhuzhou 412002China

Based on a constructal theory,the structure design of a printed circuit recuperator with a semicircular heat transfer channel for supercritical CO_(2)cycle is carried ***,a complex function composed of weighted sum of the reciprocal of total heat transfer rate and total pumping power consumption is regarded as an optimization objective,and total volumes of the recuperator and heat transfer channel are regarded as *** optimal heat transfer channel radius and minimum complex function of the recuperator are *** turns out that heat transfer rate,pumping power consumption,and complex function under the optimal construct of recuperator are reduced by 15.10%,82.44%,and 32.33%,*** exists the optimal single plate channel number which results in the double minimum complex ***,for the purpose of minimizing the reciprocal of heat transfer rate and pumping power consumption,NSGA-II algorithm is used to achieve multi-objective optimization,and the minimum deviation index derived by the decision-making methods is 0.076,which can be taken as multi-objective optimal design scheme for printed circuit recuperator with semicircular heat transfer *** findings presented here can serve as theoretical recommendations for the structure design of printed circuit recuperator.

关键词： constructal theory supercritical CO_(2)cycle printed circuit heat exchanger heat transfer rate pumping power consumption multi-objective optimization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Multi-objective constructal design for quadrilateral heat generation body based on thermal-entransy theory and NSGA-Ⅱ

引用

Science China(Technological Sciences) 2024年第9期67卷 2777-2786页

作者： CHEN LinGen ZHU HongWei GE YanLin SHI ShuangShuang FENG HuiJun institute of Thermal Science and Power engineering Wuhan Institute of TechnologyWuhan 430205China Hubei Provincial engineering technology Research Center of Green Chemical Equipment Wuhan 430205China school of mechanical Electrical EngineeringWuhan Institute of TechnologyWuhan 430205China

Based on thermal-entransy theory, the multi-objective constructal design of quadrilateral heat generation body(HGB) with similar shapes of leaves is studied further. The relationship between the aspect ratio of quadrilateral HGB and average temperature difference based on thermal-entransy dissipation is compared with that between the aspect ratio of quadrilateral HGB and the maximum temperature difference(MTD). The relationship between a composite function, consisting of linear weighting sum of the average temperature difference and MTD, and aspect ratio is obtained, and the optimal aspect ratios under minimum composite function with different weighting coefficients are obtained. Using the NSGA-Ⅱ algorithm, the Pareto frontier containing a series of compromise results of average temperature difference and MTD is obtained, and optimization results are compared using the deviation index. There is no aspect ratio to make both MTD and average temperature difference reach the minimum, and the optimal aspect ratio under the minimum MTD is smaller than that under the minimum average temperature difference. The optimal aspect ratio is obtained by making the composite function reach the minimum, and the optimal aspect ratios obtained by minimizing the composite function with different weighting coefficients are different. Compared with the construct of the initial design, the value of the composite function with optimal construct decreases by 1.9%, and the aspect ratio of the quadrilateral HGB decreases by 9.1%. The average temperature difference with the optimal construct increases by 2.1%, and the MTD with the optimal construct decreases by 5.6%. The deviation index under multi-objective optimization is smaller than that under single-objective optimization, and the obtained construct has better comprehensive thermal conductivity. Compared with TOPSIS and LINMAP decision-making methods, the average temperature difference with composite function optimization increases by 0.5

关键词： thermal-entransy theory constructal theory heat conduction quadrilateral heat generation body composite function NSGA-Ⅱ

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Manipulator tracking technology based on FSRUKF

引用

Journal of Systems engineering and Electronics 2024年第2期35卷 473-484页

作者： SHI Guoqing ZHANG Boyan ZHANG Jiandong YANG Qiming HUANG Xiaofeng QUE Jianyao PU Junwei GENG Xiutang school of Electronics and Information Northwestern Polytechnical UniversityXi’an 710072China Northwest institute of mechanical&electrical engineering Xianyang 712000China

Aiming at the shortcoming that the traditional industrial manipulator using off-line programming cannot change along with the change of external environment,the key technologies such as machine vision and manipulator control are studied,and a complete manipulator vision tracking system is ***,Denavit-Hartenberg(D-H)parameters method is used to construct the model of the manipulator and analyze the forward and inverse kinematics equations of the *** the same time,a binocular camera is used to obtain the threedimensional position of the ***,in order to make the manipulator track the target more accurately,the fuzzy adaptive square root unscented Kalman filter(FSRUKF)is proposed to estimate the target ***,the manipulator tracking system is built by using the position-based visual *** simulation experiments show that FSRUKF converges faster and with less error than the square root unscented Kalman filter(SRUKF),which meets the application requirements of the manipulator tracking system,and basically meets the application requirements of the manipulator tracking system in the practical experiments.

关键词： square root unscented Kalman filter(SRUKF) fuzzy inference manipulator visual servo

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Numerical simulation and parameter optimization of Coriolis force scale measurement process based on DEM

引用

Particuology 2024年第7期90卷 128-139页

作者： Haiting Liu Yong Yang Xiangliang Wang Jiewen Deng Bingbing Wang school of Energy and Power engineering Northeast Electric Power UniversityJilin132012China CNBM Hefei mechanical&electrical engineering technology Co.Ltd Hefei230051China

The Coriolis force method is a recently developed and highly regarded direct measurement technique that enables high-precision measurement of bulk *** operational parameters and variations thereof directly influence the measurement accuracy of the *** this study,a measurement correction coefficient is introduced to improve the calculation method for mass flow rate of the *** DEM is employed to simulate the motion of particle groups within the Coriolis force scale under different parameters,and the effects of various structural and operational parameters on the measurement results are *** research findings indicate that a lower rotational speed leads to more stable instantaneous measurement results,although the measurement error is relatively *** the rotational speed exceeds 300 rpm,the measurement error remains within 15%.For materials with a radius of 1–2 mm,the variation range of precision error is approximately 0.4%.Among the structural parameters,the radius of the measurement wheel has the most significant impact on the measurement results,wherein a larger measurement wheel radius corresponds to a smaller measurement *** horizontal angle of the blades follows as the next influential parameter,with a clockwise rotation and a horizontal angle of 30°resulting in a measurement error below 2%.

关键词： Parameter optimization Discrete element method Coriolis force scale Measurement error Numerical simulation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chain Rule for Extracting Resilience Procurement Costs from Locational Marginal Prices

引用

CSEE Journal of Power and Energy Systems 2024年第3期10卷 1342-1355页

作者： Yifei Wang Tong Zhu Tiancong Chen Mohammad Shahidehpour Qingshan Xu College of electrical engineering Southeast UniversityNanjing 210096China Henan mechanical&electrical Vocational College Xinzheng 451191China Illinois institute of technology ChicagoIllinois 60616USA IEEE CSEE

Power system resilience procurement costs in N-k contingencies have gained more prominence as number of extreme events continues to increase.A chain rule is presented in this paper for extracting resilience procurement costs from a fully decomposed locational marginal price(LMP)***,power transfer distribution factor(PTDF)matrices with AC power flow(i.e.,AC-PTDF)are ***-PTDF and AC-LODF(line outage distribution factor)equations are derived for N-k contingencies and a fully decomposed LMP model is developed where generation and transmission security components are established for specific ***,resilience procurement costs can be measured at different buses for the proposed security *** of N-k contingencies on resilience procurement costs at specific buses can be determined as proposed security components will gain more insight for resilience procurement in power *** modified IEEE 6-bus and 118-bus systems are adopted to verify effectiveness of the proposed resilience procurement method.

关键词： Line outage distribution factors locational marginal price power system resilience power transfer distribution factor security components

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Research of caged dynamics of clusters center atoms in Pd_(82)Si_(18) amorphous alloy

引用

Chinese Physics B 2024年第4期33卷 623-629页

作者：邓永和陈贝祁清华李兵兵高明文大东王小云彭平 school of Computational Science and Electronics Hunan Institute of EngineeringXiangtan 411104China school of Physics and mechanical&electrical engineering Jishou UniversityJishou 416000China school of Materials Science and engineering Hunan UniversityChangsha 410082China

To date,there is still a lack of a comprehensive explanation for caged dynamics which is regarded as one of the intricate dynamic behaviors in amorphous *** study focuses on Pd_(82)Si_(18)as the research object to further elucidate the underlying mechanism of caged dynamics from multiple perspectives,including the cage's lifetime,atomic local environment,and atomic potential *** results reveal that Si atoms exhibit a pronounced cage effect due to the hindrance of Pd atoms,resulting in an anomalous peak in the non-Gaussian *** in-depth investigation was conducted on the caged dynamics differences between fast and slow Si *** comparison to fast Si atoms,slow Si atoms were surrounded by more Pd atoms and occupied lower potential energy states,resulting in smaller diffusion displacements for the slow Si ***,slow Si atoms tend to be in the centers of smaller clusters with coordination numbers of 9 and *** the isothermal relaxation process,clusters with coordination numbers 9 and 10 have longer lifetimes,suggesting that the escape of slow Si atoms from their cages is more *** findings mentioned above hold significant implications for understanding the caged dynamics.

关键词： caged dynamics Pd_(82)Si_(18) amorphous alloy fast and slow atoms clusters lifetime

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：