检索结果-南通市图书馆

International Journal of Minerals,Metallurgy and materials 2025年第1期32卷 147-153页

作者： Junjie Li Wenbo Yu Zhenyu Sun Weichen Zheng Liangwei Zhang Yanling Xue Wenning Liu Shoumei Xiong Center of materials science and engineering School of Mechanical and Electronic Control EngineeringBeijing Jiaotong UniversityBeijing 100044China Traffic&Transportation engineering Central South UniversityChangsha 410075China Shanghai Synchrotron Radiation Facility Shanghai Advanced Research InstituteChinese Academy of SciencesShanghai 201204China school of materials science and engineering Tsinghua UniversityBeijing 100084China

High pressure die casting(HPDC)AlSi10Mn Mg alloy castings are widely used in the automobile *** can optimize the mechanical properties of castings through heat treatment,while the release of thermal stress arouses the deformation of large integrated ***,the development of non-heat treatment Al alloys is becoming the hot *** addition,HPDC contains externally solidified crystals(ESCs),which are detrimental to the mechanical properties of *** achieve high strength and toughness of non-heat treatment die-casting Al-Si alloy,we used AlSi9Mn alloy as matrix with the introduction of Zr,Ti,Nb,and *** influences on ESCs and mechanical properties were systematically investigated through three-dimensional reconstruction and thermodynamic *** results reveal that the addition of Ti increased ESCs'size and porosity,while the introduction of Nb refined ESCs and decreased ***,large-sized Al_3(Zr,Ti)phases formed and degraded the mechanical *** introduction of Ce resulted in the poisoning effect and reduced mechanical properties.

关键词： aluminium alloy high-pressure die-casting externally solidified crystals non-heat treatment

Research status and prospects of the fractal analysis of metal material surfaces and interfaces

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and materials 2025年第1期32卷 20-38页

作者： Qinjin Dai Xuefeng Liu Xin Ma Shaojie Tian Qinghe Cui Beijing Advanced Innovation Center for materials Genome engineering University of Science and Technology BeijingBeijing 100083China Beijing Laboratory of Metallic materials and Processing for Modern Transportation University of Science and Technology BeijingBeijing 100083China Laboratory for Advanced materials Processing of Ministry of Education University of Science and Technology BeijingBeijing 100083China school of Mechanical and Electrical engineering Xinjiang Institute of EngineeringUrumqi 830023China

As a mathematical analysis method,fractal analysis can be used to quantitatively describe irregular shapes with self-similar or self-affine *** analysis has been used to characterize the shapes of metal materials at various scales and *** methods make it difficult to quantitatively describe the relationship between the regular characteristics and properties of metal material surfaces and ***,fractal analysis can be used to quantitatively describe the shape characteristics of metal materials and to establish the quantitative relationships between the shape characteristics and various properties of metal *** the perspective of two-dimensional planes and three-dimensional curved surfaces,this paper reviews the current research status of the fractal analysis of metal precipitate interfaces,metal grain boundary interfaces,metal-deposited film surfaces,metal fracture surfaces,metal machined surfaces,and metal wear *** relationship between the fractal dimensions and properties of metal material surfaces and interfaces is *** from three perspectives of fractal analysis,namely,research scope,image acquisition methods,and calculation methods,this paper identifies the direction of research on fractal analysis of metal material surfaces and interfaces that need to be *** is believed that revealing the deep influence mechanism between the fractal dimensions and properties of metal material surfaces and interfaces will be the key research direction of the fractal analysis of metal materials in the future.

关键词： metal material surfaces and interfaces fractal analysis fractal dimension homogeneity

Preparation of Co/S co-doped carbon catalysts for excellent methylene blue degradation

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and materials 2025年第1期32卷 169-181页

作者： Haixu Li Haobo He Tiannan Jiang Yunfei Du Zhichen Wu Liang Xu Xinjie Wang Xiaoguang Liu Wanhua Yu Wendong Xue school of materials science and engineering University of Science and Technology BeijingBeijing 100083China Beijing Jinyu Tongda Refractory Technologies Co. Ltd.Beijing 100085China

S and Co co-doped carbon catalysts were prepared via pyrolysis of MOF-71 and thiourea mixtures at 800℃at a mass ratio of MOF-71 to thiourea of 1:0.1 to effectively activate peroxymonosulfate(PMS)for methylene blue(MB)*** effects of two different mixing routes were identified on the MB degradation ***,the catalyst obtained by the alcohol solvent evaporation(MOF-AEP)mixing route could degrade 95.60%MB(50 mg/L)within 4 min(degradation rate:K=0.78 min^(-1)),which was faster than that derived from the direct grinding method(MOF-DGP,80.97%,K=0.39 min^(-1)).X-ray photoelectron spectroscopy revealed that the Co-S content of MOF-AEP(43.39at%)was less than that of MOF-DGP(54.73at%),and the proportion of C-S-C in MOF-AEP(13.56at%)was higher than that of MOF-DGP(10.67at%).Density functional theory calculations revealed that the adsorption energy of Co for PMS was -2.94 eV when sulfur was doped as C-S-C on the carbon skeleton,which was higher than that when sulfur was doped next to cobalt in the form of Co-S bond(-2.86 eV).Thus,the C-S-C sites might provide more contributions to activate PMS compared with ***,the degradation parameters,including pH and MOF-AEP dosage,were ***,radical quenching experiments and electron paramagnetic resonance(EPR)measurements revealed that ^(1)O_(2)might be the primary catalytic species,whereas·O~(2-)might be the secondary one in degrading MB.

关键词： advanced oxidation process alcohol solvent evaporation hydrogen bond S and Co co-doped carbon catalysts wastewater remediation

Aligned Ion Conduction Pathway of Polyrotaxane‑Based Electrolyte with Dispersed Hydrophobic Chains for Solid‑State Lithium–Oxygen Batteries

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第2期17卷 169-186页

作者： Bitgaram Kim Myeong‑Chang Sung Gwang‑Hee Lee Byoungjoon Hwang Sojung Seo Ji‑Hun Seo Dong‑Wan Kim Department of materials science and engineering Korea University145 Anam‑RoSeongbuk‑GuSeoul 02841Republic of Korea school of Civil Environmental and Architectural EngineeringKorea University145 Anam‑RoSeongbuk‑GuSeoul 02841Republic of Korea materials science and Chemical engineering Center Institute for Advanced Engineering(IAE)Yongin 17180Republic of Korea

A critical challenge hindering the practical application of lithium–oxygen batteries(LOBs)is the inevitable problems associated with liquid electrolytes,such as evaporation and safety *** study addresses these problems by proposing a modified polyrotaxane(mPR)-based solid polymer electrolyte(SPE)design that simultaneously mitigates solvent-related problems and improves ***-SPE exhibits high ion conductivity(2.8×10^(−3)S cm^(−1)at 25℃)through aligned ion conduction pathways and provides electrode protection ability through hydrophobic chain *** this mPR-SPE into solid-state LOBs resulted in stable potentials over 300 *** situ Raman spectroscopy reveals the presence of an LiO_(2)intermediate alongside Li_(2)O_(2)during oxygen *** situ X-ray diffraction confirm the ability of the SPE to hinder the permeation of oxygen and moisture,as demonstrated by the air permeability *** present study suggests that maintaining a low residual solvent while achieving high ionic conductivity is crucial for restricting the sub-reactions of solid-state LOBs.

关键词： Solid polymer electrolyte Lithium-oxygen batteries Polyrotaxane ion conductivity Hydrophobic chain

通过受控晶体应变揭示PtCo双金属固体溶液中增强的氧还原活性（英文）

在线全文

学校读者我要写书评

暂无评论

science China materials 2025年第01期 180-188页

作者：贺宁吴胜强俞文松金方润谢文俊鲁欣欣赵晓续陈仲欣涂文广唐叔贤 school of science and engineering The Chinese University of Hong Kong school of materials science and engineering Peking University school of materials science and engineering Huaqiao University Petro China Shenzhen New Energy Research Institute Institute of materials science and Devices Suzhou University of Science and Technology

开发用于氧还原反应（ORR）的低成本、高活性铂（Pt）基电催化剂对于燃料电池的广泛应用至关重要.一种有效的方法在于将Pt与非贵过渡金属合金化,以调节Pt表面的物理化学状态.然而,由于合金化过程中成分、晶体类型和表面结构的复杂性,在...

开发用于氧还原反应（ORR）的低成本、高活性铂（Pt）基电催化剂对于燃料电池的广泛应用至关重要.一种有效的方法在于将Pt与非贵过渡金属合金化,以调节Pt表面的物理化学状态.然而,由于合金化过程中成分、晶体类型和表面结构的复杂性,在理解结构-性能关系方面仍然存在巨大挑战.在本研究中,我们使用液相合成方法合成了一系列不同比例的PtCo双金属固溶体.通过利用固溶体的特性,所得的PtCo双金属合金保持了面心立方晶体结构,最大限度地减少了合金化过程中引入的复杂性,有利于活性机理分析.此外,在受控合金成分和晶体结构下,我们研究了氧还原反应的电催化活性对铂催化剂表面应变的依赖性.据此设计的S-PtCo-SNPs阴极赋予了质子交换膜燃料电池（PEMFC）(2.08 W cm-2,4 A cm-2)和锌-空气电池（ZAB）(143.1m W cm-2,214.5m A cm-2)出色的性能.

关键词：

Multiple Tin Compounds Modified Carbon Fibers to Construct Heterogeneous Interfaces for Corrosion Prevention and Electromagnetic Wave Absorption

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第1期17卷 507-527页

作者： Zhiqiang Guo Di Lan Zirui Jia Zhenguo Gao Xuetao Shi Mukun He Hua Guo Guanglei Wu Pengfei Yin College of science Sichuan Agricultural UniversityYa’an 625014People’s Republic of China school of materials science and engineering Hubei University of Automotive TechnologyShiyan 442002People’s Republic of China Institute of materials for Energy and Environment State Key Laboratory of Bio‑Fibers and Eco‑TextilesCollege of Materials Science and EngineeringQingdao UniversityQingdao 266071People’s Republic of China Shaanxi Key Laboratory of Macromolecular science and Technology School of Chemistry and Chemical EngineeringNorthwestern Polytechnical UniversityXi’anShaanxi 710072People’s Republic of China

Currently,the demand for electromagnetic wave(EMW)absorbing materials with specific functions and capable of withstanding harsh environments is becoming increasingly ***-component interface engineering is considered an effective means to achieve high-efficiency EMW ***,interface modulation engineering has not been fully discussed and has great potential in the field of EMW *** this study,multi-component tin compound fiber composites based on carbon fiber(CF)substrate were prepared by electrospinning,hydrothermal synthesis,and high-temperature thermal *** utilizing the different properties of different substances,rich heterogeneous interfaces are *** effectively promotes charge transfer and enhances interfacial polarization and conduction *** prepared SnS/SnS_(2)/SnO_(2)/CF composites with abundant heterogeneous interfaces have and exhibit excellent EMW absorption properties at a loading of 50 wt%in epoxy *** minimum reflection loss(RL)is−46.74 dB and the maximum effective absorption bandwidth is 5.28 ***,SnS/SnS_(2)/SnO_(2)/CF epoxy composite coatings exhibited long-term corrosion resistance on Q235 steel ***,this study provides an effective strategy for the design of high-efficiency EMW absorbing materials in complex and harsh environments.

关键词： Electrostatic spinning Component regulation Heterogeneous interfaces Electromagnetic wave absorption Corrosion protection

Magneto‑Dielectric Synergy and Multiscale Hierarchical Structure Design Enable Flexible Multipurpose Microwave Absorption and Infrared Stealth Compatibility

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第2期17卷 401-416页

作者： Chen Li Leilei Liang Baoshan Zhang Yi Yang Guangbin Ji school of Electronic science and engineering Nanjing UniversityNanjing 210093People’s Republic of China College of materials science and Technology Nanjing University of Aeronautics and AstronauticsNanjing 210016People’s Republic of China

Developing advanced stealth devices to cope with radar-infrared(IR)fusion detection and diverse application scenarios is increasingly demanded,which faces significant challenges due to conflicting microwave and IR cloaking mechanisms and functional integration ***,we propose a multiscale hierarchical structure design,integrating wrinkled MXene IR shielding layer and flexible Fe_(3)O_(4)@C/PDMS microwave absorption *** top wrinkled MXene layer induces the intensive diffuse reflection effect,shielding IR radiation signals while allowing microwave to pass ***,the permeable microwaves are assimilated into the bottom Fe_(3)O_(4)@C/PDMS layer via strong magneto-electric *** theoretical and experimental optimization,the assembled stealth devices realize a near-perfect stealth capability in both X-band(8–12 GHz)and long-wave infrared(8–14μm)wavelength ***,it delivers a radar cross-section reduction of−20 dB m^(2),a large apparent temperature modulation range(ΔT=70℃),and a low average IR emissivity of ***,the optimal device demonstrates exceptional curved surface conformability,self-cleaning capability(contact angle≈129°),and abrasion resistance(recovery time≈5 s).This design strategy promotes the development of multispectral stealth technology and reinforces its applicability and durability in complex and hostile environments.

关键词： Microwave absorption Radar-infrared compatible stealth Wrinkled MXene Magneto-dielectric synergy Multifunction

In situ polymerization of poly(3,4-ethylenedioxythiophene)protective layer towards stable zinc anode

在线全文

学校读者我要写书评

暂无评论

Nano Research 2025年第1期18卷 382-394页

作者： Debin Luo Peng Zhou Xiaowei Lv Panpan Sun Xiaohua Sun Hewei Zhao College of materials and Chemical engineering Key Laboratory of Inorganic Nonmetallic Crystalline and Energy Conversion MaterialsChina Three Gorges UniversityYichang 443002China Hubei Three Gorges Laboratory Yichang 443007China school of Chemistry Beihang UniversityBeijing 100191China

Aqueous zinc-ion devices are considered promising candidates for energy storage due to their high safety,low cost and relatively high energy ***,the dendrite growth,hydrogen evolution reaction(HER)and corrosion of the zinc anode significantly limit the development of Zn-ion ***,an inexpensive poly(3,4-ethylenedioxythiophene)(PEDOT)protective layer was constructed in situ on the Zn surface using electropolymerization to suppress dendrite growth and side reactions,thereby enhancing the reversibility of *** and theoretical calculations revealed that this hydrophilic protective layer promotes the desolvation process of hydrated Zn^(2+)and facilitates the transport of zinc ions,thus improving the thermodynamic and kinetic properties of Zn^(2+)deposition and inhibiting interfacial side ***,the optimized PEDOT@Zn symmetric battery exhibited a cycling stability exceeding 1250 h at 0.5 mA·cm^(-2)and 0.25 mAh·cm^(-2),with a significantly reduced overpotential(from 91.8 to 35 mV).With the assistance of the PEDOT protective layer,the PEDOT@Zn//Cu battery maintained approximately 99.5%Coulombic efficiency after 450 ***-situ scanning electron microscopy(SEM)and in situ optical microscopy characterizations further confirmed that the PEDOT protective layer can effectively suppress the growth of zinc ***,the Zn-ion capacitors assembled by the PEDOT@Zn and activated carbon also demonstrated outstanding cycling stability.

关键词： zinc-ion devices zinc anode poly(3 4-ethylenedioxythiophene)(PEDOT) dendrite desolvation process

Defect engineering:Can it Mitigate Strong Coulomb Effect of Mg^(2+)in Cathode materials for Rechargeable Magnesium Batteries?

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第1期17卷 135-159页

作者： Zhengqing Fan Ruimin Li Xin Zhang Wanyu Zhao Zhenghui Pan Xiaowei Yang school of Chemistry and Chemical engineering Shanghai Jiao Tong UniversityShanghai 200240People’s Republic of China school of Chemistry and Chemical engineering Taiyuan University of TechnologyTaiyuan 030024People’s Republic of China school of materials science and engineering Tongji UniversityShanghai 201804People’s Republic of China

Rechargeable magnesium batteries(RMBs)have been considered a promising“post lithium-ion battery”system to meet the rapidly increasing demand of the emerging electric vehicle and grid energy storage ***,the sluggish diffusion kinetics of bivalent Mg^(2+)in the host material,related to the strong Coulomb effect between Mg^(2+)and host anion lattices,hinders their further development toward practical *** engineering,regarded as an effective strategy to break through the slow migration puzzle,has been validated in various cathode materials for *** this review,we first thoroughly understand the intrinsic mechanism of Mg^(2+)diffusion in cathode materials,from which the key factors affecting ion diffusion are further ***,the positive effects of purposely introduced defects,including vacancy and doping,and the corresponding strategies for introducing various defects are *** applications of defect engineering in cathode materials for RMBs with advanced electrochemical properties are also ***,the existing challenges and future perspectives of defect engineering in cathode materials for the overall high-performance RMBs are described.

关键词： Rechargeable magnesium battery Sluggish diffusion kinetic Defect engineering Cathode materials Ion migration

Molecular Structure Tailoring of Organic Spacers for High‑Performance Ruddlesden–Popper Perovskite Solar Cells

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第2期17卷 314-357页

作者： Pengyun Liu Xuejin Li Tonghui Cai Wei Xing Naitao Yang Hamidreza Arandiyan Zongping Shao Shaobin Wang Shaomin Liu school of materials science and engineering State Key Laboratory of Heavy Oil ProcessingChina University of Petroleum(East China)Qingdao 266580People’s Republic of China school of Chemistry and Chemical engineering Shandong University of TechnologyZibo 255049People’s Republic of China Centre for Applied materials and Industrial Chemistry(CAMIC) School of ScienceRMIT UniversityMelbourneVic 3000Australia WA school of Mines:Minerals Energy and Chemical Engineering(WASM‑MECE)Curtin UniversityPerthWA 6102Australia school of Chemical engineering The University of AdelaideAdelaideSA 5005Australia school of engineering Great Bay UniversityDongguan 523000People’s Republic of China

Layer-structured Ruddlesden–Popper(RP)perovskites(RPPs)with decent stability have captured the imagination of the photovoltaic research community and bring hope for boosting the development of perovskite solar cell(PSC)***,two-dimensional(2D)or quasi-2D RP PSCs are encountered with some challenges of the large exciton binding energy,blocked charge transport and poor film quality,which restrict their photovoltaic ***,these issues can be readily resolved by rationally designing spacer cations of *** review mainly focuses on how to design the molecular structures of organic spacers and aims to endow RPPs with outstanding photovoltaic *** firstly elucidated the important roles of organic spacers in impacting crystallization kinetics,charge transporting ability and stability of *** we brought three aspects to attention for designing organic ***,we presented the specific molecular structure design strategies for organic spacers of RPPs aiming to improve photovoltaic performance of RP *** proposed strategies in this review will provide new avenues to develop novel organic spacers for RPPs and advance the development of RPP photovoltaic technology for future applications.

关键词： Ruddlesden-Popper perovskites Low-dimensional perovskite solar cells Organic spacers Molecular structure Design strategies