检索结果-南通市图书馆

碳量子点/四(4-羧基苯基)卟啉/BiOBr S型异质结用于高效光催化降解抗生素

在线全文

学校读者我要写书评

暂无评论

Science China Materials 2024年第2期67卷 562-572页

作者：王春春戎珂刘艳萍杨方李世杰 Key Laboratory of Health Risk Factors for Seafood of Zhejiang Province National Engineering Research Center for Marine AquacultureCollege of Marine Science and TechnologyZhejiang Ocean UniversityZhoushan 316022China school of Mechanical and Automotive engineering Shanghai University of Engineering ScienceShanghai 201620China

太阳能光催化处理制药废水是缓解环境问题和能源危机的一种很有前途的方法.然而,提高其处理效率面临众多挑战,如光吸收效率低、光生载流子快速复合和光氧化还原电位低等.本文通过在BiOBr(BOB)微球上沉积碳量子点(CDs)和四(4-羧基苯基)卟... 详细信息

太阳能光催化处理制药废水是缓解环境问题和能源危机的一种很有前途的方法.然而,提高其处理效率面临众多挑战,如光吸收效率低、光生载流子快速复合和光氧化还原电位低等.本文通过在BiOBr(BOB)微球上沉积碳量子点(CDs)和四(4-羧基苯基)卟啉(TCPP),巧妙地构建了TCPP/CDs/BOB有机/无机三元S型异质结,用于在可见光下有效降解水体中的盐酸四环素(TC).研究发现,由于两者之间的费米能级差异,在形成异质结时触发了电子从TCPP传递到BOB,从而在界面处构建内部电场(IEF).这极大推动了光诱导载流子的有效分离.此外,CDs作为电子收集器进一步提高了S型异质结的载流子分离能力,因此保留了在CDs中聚集更强还原能力的光电子和在BOB价带中更强氧化能力的空穴来参与光催化反应.在这些催化剂中,TCPP/CDs/BOB-2异质结催化剂在40 min内对TC的降解能力高达83.6%.TCPP/CDs/BOB-2的反应速率常数(k)分别约为BOB、CDs/BOB和TCPP/BOB的2.3、1.8和2.0倍.这项工作为探索用于水净化的有机/无机三元S型光催化剂提供了新的视角.

关键词： carbon quantum dots organic/inorganic S-scheme heterojunction tetra(4-carboxyphenyl)porphyrin/BiOBr internal electric field photocatalysis

Strong,tough,and thermally conductive nacre-inspired boron nitride nanosheet/epoxy layered nanocomposites

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第2期17卷 820-828页

作者： Huagao Wang Rongjian Lu Lei Li Cheng Liang Jia Yan Rui Liang Guoxing Sun Lei Jiang Qunfeng Cheng school of Chemistry Key Laboratory of Bio-inspired Smart Interfacial Science and Technology of Ministry of EducationBeihang UniversityBeijing 100191China school of Chemistry and Materials Science University of Science and Technology of ChinaHefei 230026China Suzhou Institute for Advanced Research University of Science and Technology of ChinaSuzhou 215123China Department of Stomatology Fifth Medical CenterChinese PLA General HospitalBeijing 100039China Department of engineering Science Faculty of Innovation EngineeringMacao University of Science and TechnologyAvenida Wai LongTaipaMacao 999078 China Joint Key Laboratory of the Ministry of Education Institute of Applied Physics and Materials EngineeringUniversity of MacaoAvenida da UniversidadeTaipaMacao 999078China Institute of Energy Materials Science(IEMS) University of Shanghai for Science and TechnologyShanghai 200093China

Thermally conductive polymer nanocomposites integrated with lightweight,excellent flexural strength,and high fracture toughness(KIc)would be of great use in many fields.However,achieving all of these properties simultaneously remains a great challenge.Inspired by natural nacre,here we demonstrate a lightweight,strong,tough,and thermally conductive boron nitride nanosheet/epoxy layered(BNNEL)nanocomposite.Because of the layered structure and enhancing the interfacial interactions through hydrogen bonding and Si–O–B covalent bonding,the resulting nacre-inspired BNNEL nanocomposites show high fracture toughness of~4.22 MPa·m^(1/2),which is 7 folds as high as pure epoxy.Moreover,the BNNEL nanocomposites demonstrate sufficient flexural strength(~168.90 MPa,comparable to epoxy resin),while also being lightweight(~1.23 g/cm^(3)).Additionally,the BNNEL nanocomposites display a thermal conductivity(κ)of~0.47 W/(m·K)at low boron nitride nanosheet loading of 2.08 vol.%,which is 2.7 times higher than that of pure epoxy resin.The developed nacre-inspired strategy of layered structure design and interfacial enhancement provides an avenue for fabricating high mechanical properties and thermally conductive polymer nanocomposites.

关键词： nacre-inspiration nanocomposites flexural strength fracture toughness(KIc) thermal conductivity

Recent progress in co-detection of single-cell transcripts and proteins

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第1期17卷 132-150页

作者： Shanqing Huang Qian Fan Yidi Wang Zhi Huang Weixiong Shi Yanli Gong Ting Yang Jie Wang Lingling Wu Chaoyong Yang Discipline of Intelligent Instrument and Equipment College of Chemistry and Chemical EngineeringXiamen UniversityXiamen 361005China Institute of Molecular Medicine Renji HospitalShanghai Jiao Tong University School of MedicineShanghai 200127China Department of General Surgery Xiang’an Hospital of Xiamen UniversitySchool of MedicineXiamen UniversityXiamen 361101China Research Center for Analytical Sciences Department of ChemistryCollege of SciencesNortheastern UniversityShenyang 110819China

Cellular heterogeneity is a universal property of living systems,and the interrogation of single cells facilitates in-depth understanding of distinct cellular states and functions in various biological processes.Co-analysis of transcripts and proteins from the same single cells opens the way to decipher complex RNA regulatory frameworks and phenotypes,facilitating the understanding of cellular fate and function regulations,discovery of novel cell types,and construction of a high-resolution cell atlas.Herein,we review the state-of-art advances in the development of methodologies for co-analysis of single-cell transcripts and proteins.First,imaging-based methods are summarized with particular emphasis on optical and mass spectrometry imaging.Next,sequencing-based approaches for high-throughput and sensitive co-analysis of single-cell transcripts and proteins are described,including droplet-,microwell-,and split-pool-based platforms.Subsequently,combined methods with more flexibility and universality are discussed.These methods commonly employ different strategies or reactions to convert transcripts and proteins of single cells into distinct signals simultaneously,which can be detected by different instruments or platforms.Lastly,some perspectives on the future challenges and development trends in this field are presented.

关键词： single cell optical imaging mass spectrometry imaging single-cell RNA sequencing(scRNA-seq) co-detection

Your personal choices in transportation and food are important for lowering carbon emissions

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Environmental Science & engineering 2024年第6期18卷 27-32页

作者： Bruce Logan Fang Zhang Wulin Yang Le Shi Institute of Energy and the Environment The Pennsylvania State UniversityUniversity ParkPA 16802USA school of Environment Tsinghua UniversityBeijing 100084China College of Environmental Sciences and engineering Peking UniversityBeijing 100871China College of Environmental and Resource Sciences Zhejiang UniversityHangzhou 310058China

There is a global need to reduce greenhouse gas emissions to limit the extent of climate change.A better understanding of how our own activities and lifestyle influence our energy use and carbon emissions can help us enable changes in activities that can lead to reductions in carbon emissions.Here we discuss an approach based on examining carbon emissions from the perspective of the unit C,where 1 C is the CO_(2)from food a person would on average eat every day.This approach shows that total CO_(2)emissions in China,normalized by the population,is 22.5 C while carbon emissions for a person in the US is 43.9 C.A better appreciation of our own energy use can be obtained by calculating carbon emissions from our own activities in units of C,for example for driving a car gasoline or electric vehicle a certain number of kilometers,using electricity for our homes,and eating different foods.With this information,we can see how our carbon emissions compare to national averages in different countries and make decisions that could lower our personal CO_(2)emissions.

关键词： Carbon dioxide Climate change Daily energy Greenhouse gas

Hybrid assembly of conducting nanofiber network for ultra-stretchable and highly sensitive conductive hydrogels

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第2期169卷 1-10页

作者： Yalei Wang Shulong Zeng Shaohong Shi Yuheng Jiang Zhiwei Du Bingzhen Wang Xiurong Li State Key Laboratory of Featured Metal Materials and Life-cycle Safety for Composite Structures School of ResourcesEnvironment and MaterialsGuangxi UniversityNanning 530004China State Key Laboratory of Polymer Materials engineering Polymer Research Institute of Sichuan UniversitySichuan UniversityChengdu 610065China

Conductive hydrogels have attracted extensive attention owing to their promising application prospects in flexible and wearable electronics.However,achieving both high sensitivity and mechanical robustness remains challenging.Herein,a novel and versatile conductive hydrogel based on the hybrid assem-bly of conductive cellulose nanofiber(CNF)networks has been designed and fabricated.Assisted by the templating effect of CNFs and stabilizing effect of negatively charged poly(styrene sulfonate)(PSS),conducting polymer poly(3,4-ethylenedioxythiophene)(PEDOT)was self-organized into three-dimensional nanostructures which constructed a robust conductive network after in-situ oxidative polymerization.The unique structure derived from CNF bio-template endowed polyacrylamide(PAM)hydrogels with improved electrical conductivity and excellent mechanical performance.As a result,the as-fabricated CNF/PEDOT:PSS/PAM hydrogel exhibited an ultimate tensile strain of 1881%and toughness of 3.72 MJ/m^(3),which were 4.07 and 8.27 times higher than the CNF-free hydrogel,respectively.More significantly,the resultant hydrogel sensor showed highly desirable sensing properties,including remarkable sensing range(1100%),high gauge factor(GF=5.16),fast response time(185 ms),and commendable durability,as well as good adhesiveness.Moreover,the hydrogel sensor was able to distinguish subtle physiological activities including phonation and facial expression,and monitor large human body motions such as finger flexion and elbow blending.Besides,it was feasible to integrate the strain sensor on the joints of robots to recognize complicated machine motion signals,showing potential in advanced human-machine interactions.

关键词： Strain sensor Cellulose nanofibers PEDOT:PSS Conductive hydrogel Templating method

Recent advances in two-dimensional photovoltaic devices

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Semiconductors 2024年第5期45卷 26-40页

作者： Haoyun Wang Xingyu Song Zexin Li Dongyan Li Xiang Xu Yunxin Chen Pengbin Liu Xing Zhou Tianyou Zhai State Key Laboratory of Materials Processing and Die&Mould Technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan 430074China Research Institute of Huazhong University of Science and Technology in Shenzhen Shenzhen 518057China Optics Valley Laboratory Wuhan 430074China

Two-dimensional(2D)materials have attracted tremendous interest in view of the outstanding optoelectronic properties,showing new possibilities for future photovoltaic devices toward high performance,high specific power and flexibility.In recent years,substantial works have focused on 2D photovoltaic devices,and great progress has been achieved.Here,we present the review of recent advances in 2D photovoltaic devices,focusing on 2D-material-based Schottky junctions,homojunctions,2D−2D heterojunctions,2D−3D heterojunctions,and bulk photovoltaic effect devices.Furthermore,advanced strategies for improving the photovoltaic performances are demonstrated in detail.Finally,conclusions and outlooks are delivered,providing a guideline for the further development of 2D photovoltaic devices.

关键词： two-dimensional materials photovoltaic devices photodetectors solar cells heterostructures

Accelerated Primal-Dual Projection Neurodynamic Approach With Time Scaling for Linear and Set Constrained Convex Optimization Problems

在线全文

学校读者我要写书评

暂无评论

IEEE/CAA Journal of Automatica Sinica 2024年第6期11卷 1485-1498页

作者： You Zhao Xing He Mingliang Zhou Tingwen Huang Chongqing Key Laboratory of Nonlinear Circuits and Intelligent Information Processing College of Electronic and Information EngineeringSouthwest UniversityChongqing 400715China school of Computer Science Chongqing UniversityChongqing 400044China Department of Mathematics Texas A&M University at QatarDoha 23874Qatar IEEE

The Nesterov accelerated dynamical approach serves as an essential tool for addressing convex optimization problems with accelerated convergence rates.Most previous studies in this field have primarily concentrated on unconstrained smooth con-vex optimization problems.In this paper,on the basis of primal-dual dynamical approach,Nesterov accelerated dynamical approach,projection operator and directional gradient,we present two accelerated primal-dual projection neurodynamic approaches with time scaling to address convex optimization problems with smooth and nonsmooth objective functions subject to linear and set constraints,which consist of a second-order ODE(ordinary differential equation)or differential conclusion system for the primal variables and a first-order ODE for the dual vari-ables.By satisfying specific conditions for time scaling,we demonstrate that the proposed approaches have a faster conver-gence rate.This only requires assuming convexity of the objective function.We validate the effectiveness of our proposed two accel-erated primal-dual projection neurodynamic approaches through numerical experiments.

关键词： Accelerated projection neurodynamic approach lin-ear and set constraints projection operators smooth and nonsmooth convex optimization time scaling.

Strong-coupling superconductivity with Tc above 70 K in Be-decorated monolayer T-graphene

同方期刊数据库博看期刊评论

在线全文

学校读者我要写书评

暂无评论

Science China(Physics,Mechanics & Astronomy) 2024年第1期67卷 99-105页

作者： Liu Yang Peng-Fei Liu Hao-Dong Liu Ya-Ping Li Na Jiao Hong-Yan Lu Bao-Tian Wang Ping Zhang school of Physics and Physical engineering Qufu Normal UniversityQufu 273165China Institute of High Energy Physics Chinese Academy of SciencesBeijing 100049China Spallation Neutron Source Science Center Dongguan 523803China Institute of Applied Physics and Computational Mathematics Beijing 100088China

Using first-principles calculations,we predict a new type of two-dimensional(2D)beryllium(Be)-decorated T-graphene named BeC_(2),where Be atoms are inserted into C–C bonds linking the carbon tetrarings of T-graphene.The band structure shows that BeC_(2)is metallic,thus,the possible phonon-mediated superconductivity is explored based on the Eliashberg equation.The calculated electron-phonon coupling(EPC)constantλis up to 4.07,and the corresponding superconducting critical temperature(Tc)is 72.1 K,approaching the liquid nitrogen temperature.The reason for the high Tc is the strong EPC.And it is proved to be an anisotropic single-gap superconductor by analyzing the superconducting gap?kof BeC_(2).The electronic susceptibility calculation shows strong nesting effect in BeC_(2).Since rare 2D superconductors show such a strong EPC constantλwhich originates from the coupling between electrons in C-pzorbital and in-plane vibrations of Be and C atoms,the predicted BeC_(2)provides a new platform for investigating strong EPC 2D superconductor.

关键词： two-dimensional carbon-based superconductor electron-phonon coupling strong coupling high superconducting critical temperature

Green carbonization of waste coffee grounds into porous C/Fe hybrids for broadband and high-efficiency microwave absorption

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第3期170卷 1-10页

作者： Xin Wen Cui Li Hui Liu Guohua Fan Yanan Tang Chuncheng Hao Lili Ma Pingan Song Institute of Advanced Electrical Materials College of Materials Science and EngineeringQingdao University of Science and TechnologyQingdao 266042China Center for Future Materials University of Southern QueenslandSpringfieldQLD 4300Australia school of Agriculture and Environmental Science University of Southern QueenslandSpringfieldQLD 4300Australia

Recently great effort s have been focused on designing high-performance microwave absorbers using sustainable biomass resources,but there remains a lack of green and efficient fabrication methods.Herein,inspired by natural porous character of biomass waste,we demonstrated a green one-step route to convert waste coffee grounds into porous C/Fe hybrids,and further explored their potential applications for broadband and high-efficiency microwave absorption.In this design,the WCG-20-750(incorporated 20 wt%Fe(C_(5)H_(7)O_(2))_(3)catalyst and carbonized at 750℃)exhibited porous microstructure with the highest char yield of 55.45 wt%.Furthermore,the as-prepared C/Fe hybrids from WCG-20-750 displayed excellent microwave absorption performances.Typically,the minimum reflection loss(RL_(min))reached to-52.86 dB and the widest effective absorption bandwidth(EAB)was 6.40 GHz at the thickness of 3.0 mm.This work provides an economically viable and environmentally friendly strategy to convert biomass wastes into value-added microwave absorbers,ultimately making contributions to the upcycling of renewable biomass resources and the fostering of sustainable environment.

关键词： Waste recycling Microwave absorption Green carbonization Porous carbon Biomass