检索结果-南通市图书馆

Journal of Energy Chemistry 2025年第1期100卷 317-326页

作者： Binglu Deng Jie Shen Jinxing Lu Chuqiang Huang Zhuoyuan Chen Feng Peng Yunpeng Liu school of Materials Science and Hydrogen Energy Foshan University school of Chemistry and Chemical engineering Guangzhou University Guangdong Key Laboratory for Hydrogen Energy technologies

Seawater electrolysis is a promising approach for sustainable energy without relying on precious ***,the large-scale seawater electrolysis is hindered by low catalytic efficiency and severe anode corrosion caused by the harmful *** contrast to the oxygen evolution reaction （OER）and chlorin ion oxidation reaction （ClOR）,glycerol oxidation reaction （GOR） is more thermodynamically and kinetically favorable ***,a Ru doping cobalt phosphide （Ru-CoP2） is proposed as a robust bifunctional electrocatalyst for seawater electrolysis and GOR,for the concurrent productions of hydrogen and value-added *** in situ and ex situ characterization analyses demonstrated that Ru doping featured in the dynamic reconstruction process from Ru-CoP2to Ru-CoOOH,accounting for the superior GOR *** coupling GOR with hydrogen evolution was realized by employing Ru-CoP2as both anode and cathode,requiring only a low voltage of 1.43 V at 100 mA cm-2,which was 250 m V lower than that in alkaline *** work guides the design of bifunctional electrocatalysts for energy-efficient seawater electrolysis coupled with biomass resource upcycling.

关键词： Glycerol electrooxidation Hydrogen evolution Ru doping Cobalt phosphide Bifunctional electrocatalysts

Metal-organic frameworks with dinuclear metal centers for synergistically boosting CO2 photoreduction

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Science China Chemistry 2025年第01期 201-208页

作者： Hui-Feng Wang Wen-Jie Shi Yu-Xin Yang Bao-Xia Dong Tong-Bu Lu Di-Chang Zhong school of Chemistry and Chemical engineering Yangzhou University Institute for New Energy Materials and Low Carbon technologies School of Materials Science and Engineering Tianjin University of Technology

Dinuclear metal synergistic catalysis （DMSC） has been proved powerful in boosting CO2reduction,while this has not been achieved in heterogeneous catalysts with long-range order *** this study,we,by introduction of metal catalytic centers into an indium-based metal-organic framework （MOF）,obtained a series of isostructural In-MOFs,including three MOFs with mononuclear metal catalytic center （M-In）,three MOFs with dinuclear homometallic catalytic centers （MM-In）,and three MOFs with dinuclear heterometallic catalytic centers (MM’-In,M/M’=Co（II）,Ni（II）,Zn（II）).It was found that all these MOFs can serve as catalysts for photochemical CO2reduction to *** with M-In,the catalytic activities of MM-In were obviously enhanced,and that of MM’-In was further significantly *** example,the CO yield of Co Zn-In reaches a record value of 12,700μmol g-1h-1,which is 4.0,8.1,9.4,and 18.6-fold higher than that of Co Co-In,Zn Zn-In,Co-In,and Zn-In,***,the catalytic activities of Co Ni-In and Ni Zn-In also show different fold increase than those of corresponding dinuclear homometallic and mononuclear metallic *** results of control experiments and theoretical calculation reveal that the higher catalytic activities of MM-In over M-In can be ascribed to the DMSC effect,and the higher catalytic activity of MM’-In over MM-In can be ascribed to the strengthened DMSC *** work reveals the relationship between DMSC effect and bimetal centers in CO2reduction,which provides new insights into the DMSC and paves a new way to design highly active catalysts for photochemical CO2reduction.

关键词：

同方期刊数据库

Design of a cationic accelerator enabling ultrafast ion diffusion kinetics in aqueous zinc-ion batteries

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 377-384页

作者： Yawei Xiao Qianqian Gu Haoyu Li Mengyao Li Yude Wang National Center for International Research on Photoelectric and Energy Materials School of Materials and Energy Yunnan University Key Laboratory of Ministry of Education for Advanced Materials in Tropical Island Resources School of Chemistry and Chemical Engineering Hainan University College of Chemical engineering Fuzhou University Yunnan Key Laboratory of Carbon Neutrality and Green Low-carbon technologies Yunnan University

Aqueous zinc-ion batteries are highly favored for grid-level energy storage owing to their low cost and high safety,but their practical application is limited by slow ion *** address this,a strategy has been developed to create a cation-accelerating electric field on the surface of the cathode to achieve ultrafast Zn2+diffusion *** employing electrodeposition to coat MoS2on the surface of BaV6O16·3H2O nanowires,the directional built-in electric field generated at the heterointerface acts as a cation accelerator,continuously accelerating Zn2+diffusion into the active *** optimized Zn2+diffusion coefficient in CC@BaV-6O16·3H2O@MoS2(7.5×10～8cm2s-1) surpasses that of most reported V-based ***,MoS2serving as a cathodic armor extends the cycling life of the Zn-CC@BaV6O16·3H2O@MoS2full batteries to over 10000 *** work provides valuable insights into optimizing ion diffusion kinetics for high-performance energy storage devices.

关键词： Internal electric field Cationic accelerator Ion diffusion kinetics Cathode modification strategy Aqueous zinc ion battery

High-resolution imaging through dynamic scattering media: Iterative optimization based on polarimetric characteristics

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Science China Technological Sciences 2025年第1期 82-84页

作者： Meng XIANG Kai DENG Tianyu WANG Jinpeng LIU Xue DONG Teli XI Fei LIU Xiaopeng SHAO school of Optoelectronic engineering Xidian University Xi'an Key Laboratory of Computational Imaging National Key Laboratory of Infrared Detection technologies

High-resolution imaging through randomly dynamic scattered fields and highly scattered walls is an extensively sought-after capability with potential applications in various fields such as underwater imaging, biomedical imaging, and seeing through fog. Numerous methods have been proposed to unscramble object information from degraded scattered images, resulting in considerable improvements in image contrast in degraded scenarios [1].

关键词：

Influence of stretch and temperature on the energy density of dielectric elastomer generators

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2019年第11期40卷 1547-1560页

作者： H.KHAJEHSAEID H.BAGHSHOMAL AZAR school of engineering-emerging technologies University of Tabriz

Application of dielectric elastomers (DE) has remarkably increased in mechatronics because they are suitable candidates for energy harvesting due to their low cost,light weight,and high energy *** dielectric elastomer generators (DEGs) exhibit high performance regardless of the applications ***,functioning as a generator,a DE may lose its efficiency due to several failure modes including material rupture,loss of tension (LT),electrical breakdown (EB),and electromechanical instability (EMI).The failure modes confine the area of allowable states for generation *** constant and dielectric strength of such elastomers depend on the amount of applied deformation and also working temperature,which are often ignored in theoretical *** this paper,variations of the above-mentioned parameters are considered in mechanical and electrical modellings to investigate their effects on energy density and efficiency of *** results show that,ignoring the variations of material dielectric constant and dielectric strength leads to overestimation of the specific ***,it is shown that,for an acrylic-based generator,the specific energy sharply decreases with temperature rise.

关键词： renewable energy dielectric elastomer generator (DEG) stretch temperature

Preparation of Co/S co-doped carbon catalysts for excellent methylene blue degradation

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第1期32卷 169-181页

作者： Haixu Li Haobo He Tiannan Jiang Yunfei Du Zhichen Wu Liang Xu Xinjie Wang Xiaoguang Liu Wanhua Yu Wendong Xue school of Materials Science and engineering University of Science and Technology BeijingBeijing 100083China Beijing Jinyu Tongda Refractory technologies Co. Ltd.Beijing 100085China

S and Co co-doped carbon catalysts were prepared via pyrolysis of MOF-71 and thiourea mixtures at 800℃at a mass ratio of MOF-71 to thiourea of 1:0.1 to effectively activate peroxymonosulfate(PMS)for methylene blue(MB)*** effects of two different mixing routes were identified on the MB degradation ***,the catalyst obtained by the alcohol solvent evaporation(MOF-AEP)mixing route could degrade 95.60%MB(50 mg/L)within 4 min(degradation rate:K=0.78 min^(-1)),which was faster than that derived from the direct grinding method(MOF-DGP,80.97%,K=0.39 min^(-1)).X-ray photoelectron spectroscopy revealed that the Co-S content of MOF-AEP(43.39at%)was less than that of MOF-DGP(54.73at%),and the proportion of C-S-C in MOF-AEP(13.56at%)was higher than that of MOF-DGP(10.67at%).Density functional theory calculations revealed that the adsorption energy of Co for PMS was -2.94 eV when sulfur was doped as C-S-C on the carbon skeleton,which was higher than that when sulfur was doped next to cobalt in the form of Co-S bond(-2.86 eV).Thus,the C-S-C sites might provide more contributions to activate PMS compared with ***,the degradation parameters,including pH and MOF-AEP dosage,were ***,radical quenching experiments and electron paramagnetic resonance(EPR)measurements revealed that ^(1)O_(2)might be the primary catalytic species,whereas·O~(2-)might be the secondary one in degrading MB.

关键词： advanced oxidation process alcohol solvent evaporation hydrogen bond S and Co co-doped carbon catalysts wastewater remediation

Prediction and optimization of flue pressure in sintering process based on SHAP

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 346-359页

作者： Mingyu Wang Jue Tang Mansheng Chu Quan Shi Zhen Zhang school of Metallurgy Northeastern UniversityShenyang 110819China Liaoning Low-Carbon Steelmaking Technology engineering Research Center Northeastern UniversityShenyang 110819China engineering Research Center of Frontier technologies for Low-Carbon Steelmaking(Ministry of Education) Shenyang 110819China

Sinter is the core raw material for blast *** pressure,which is an important state parameter,affects sinter *** this paper,flue pressure prediction and optimization were studied based on the shapley additive explanation(SHAP)to predict the flue pressure and take targeted adjustment ***,the sintering process data were collected and processed.A flue pressure prediction model was then constructed after comparing different feature selection methods and model algorithms using SHAP+extremely random-ized trees(ET).The prediction accuracy of the model within the error range of±0.25 kPa was 92.63%.SHAP analysis was employed to improve the interpretability of the prediction *** effects of various sintering operation parameters on flue pressure,the relation-ship between the numerical range of key operation parameters and flue pressure,the effect of operation parameter combinations on flue pressure,and the prediction process of the flue pressure prediction model on a single sample were analyzed.A flue pressure optimization module was also constructed and analyzed when the prediction satisfied the judgment *** operating parameter combination was then *** flue pressure was increased by 5.87%during the verification process,achieving a good optimization effect.

关键词： sintering process flue pressure shapley additive explanation prediction optimization

Transforming waste particles into valuable adsorbents via amyloid-mediated molecular engineering

在线全文

学校读者我要写书评

暂无评论

Science China Chemistry 2025年第01期 317-328页

作者： Qingmin Yang Jian Zhao Yujia Zhang Xingyu Zhou Hao Ren Bowen Hu Zhongli Lei Lixin Chen Peng Yang school of Material and Chemical engineering Bengbu University Anhui Provincial engineering Laboratory of Silicon-Based Materials school of Chemistry and Chemical engineering Northwestern Polytechnical University Key Laboratory of Applied Surface and Colloid Chemistry Ministry of Education School of Chemistry and Chemical EngineeringShaanxi Normal University Xi'an Key Laboratory of Polymeric Soft Matter School of Chemistry and Chemical Engineering Shaanxi Normal University International Joint Research Center on Functional Fiber and Soft Smart Textile School of Chemistry and Chemical EngineeringShaanxi Normal University

The high-value utilization of industrial solid waste using a facile and eco-friendly process is of great interest and significance in reducing environmental pollution and developing a green circular economy. Herein, we propose an amyloid-mediated molecular engineering strategy to transform particulate waste into valuable adsorbents for metal ions. Our method has the advantage of aqueous solution fabrication under mild conditions without the use of high-temperature hydrothermal methods and toxic chemical reagents. Amyloid-mediated molecular engineering manipulates the phase transition of bovine serum albumin(BSA)on particulate waste surfaces, resulting in a remarkable ～3.1 times improvement in the adsorption capacity of fly ash, a typical industrial solid waste for gold ions after modification with the phase-transitioned BSA(PTB). The resultant adsorption ability was 69–1,980 times higher than those of conventional and emerging adsorbent materials such as ion exchange resins, activated carbon(AC), covalent organic frameworks(COFs), and metal-organic frameworks(MOFs). We further demonstrated the application of our PTB-modified materials in the recovery of precious metals from low-grade gold ore and electronic waste leachates. Consequently, this strategy could increase the value of waste materials nearly 27 times. In addition, this method is generally extendable to other conventional industrial adsorbents such as resin, clay, and Al2O3, and enhances their adsorption capabilities at least twofold. Overall, this work provides a simple and green approach for improving the adsorption performance of solid particles, and is expected to develop into a universal strategy for transforming waste particles into high-value-added products.

关键词：

同方期刊数据库

Co/Co_(7)Fe_(3)heterostructures with controllable alloying degree on carbon spheres as bifunctional electrocatalyst forrechargeable zinc-air batteries

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 476-487页

作者： Junkang Chen Yongyue Zhuang Yanxin Qiao Yu Zhang Aihua Yuan Hu Zhou school of Materials Science and engineering Jiangsu University of Science and TechnologyZhenjiang 212003China school of Environmental and Chemical engineering Jiangsu University of Science and TechnologyZhenjiang 212003China

Exploring efficient and nonprecious metal electrocatalysts of oxygen reduction reaction(ORR)and oxygen evolution reaction(OER)is crucial for developing rechargeable zinc-air batteries(ZABs).Herein,an alloying-degree control strategy was employed to fabricate nitrogen-doped carbon sphere(NCS)decorated with dual-phase Co/Co_(7)Fe_(3)heterojunctions(CoFe@NCS).The phase composition of materials has been adjusted by controlling the alloying *** optimal CoFe_(0.08)@NCS electrocatalyst displays a half-wave potential of 0.80 V for ORR and an overpotential of 283 mV at 10 mA·cm^(-2)for OER in an alkaline *** intriguing bifunctional electrocatalytic activity and durability is attributed to the hierarchically porous structure and interfacial electron coupling of highly-active Co_(7)Fe_(3)alloy and metallic Co *** the CoFe_(0.08)@NCS material is used as air-cathode catalyst of rechargeable liquid-state zinc-air battery(ZAB),the device shows a high peak power-density(157 mW·cm^(-2))and maintains a stable voltage gap over 150 h,outperforming those of the benchmark(Pt/C+RuO_(2))-based *** particular,the as-fabricated solid-state flexible ZAB delivers a reliable compatibility under different bending *** work provides a promising strategy to develop metal/alloy-based electrocatalysts for the application in renewable energy conversion technologies.

关键词： bifunctional electrocatalysts oxygen reduction reaction oxygen evolution reaction zinc-air battery metal/alloy carbon sphere

Defect engineering:Can it Mitigate Strong Coulomb Effect of Mg^(2+)in Cathode Materials for Rechargeable Magnesium Batteries?

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第1期17卷 135-159页

作者： Zhengqing Fan Ruimin Li Xin Zhang Wanyu Zhao Zhenghui Pan Xiaowei Yang school of Chemistry and Chemical engineering Shanghai Jiao Tong UniversityShanghai 200240People’s Republic of China school of Chemistry and Chemical engineering Taiyuan University of TechnologyTaiyuan 030024People’s Republic of China school of Materials Science and engineering Tongji UniversityShanghai 201804People’s Republic of China

Rechargeable magnesium batteries(RMBs)have been considered a promising“post lithium-ion battery”system to meet the rapidly increasing demand of the emerging electric vehicle and grid energy storage ***,the sluggish diffusion kinetics of bivalent Mg^(2+)in the host material,related to the strong Coulomb effect between Mg^(2+)and host anion lattices,hinders their further development toward practical *** engineering,regarded as an effective strategy to break through the slow migration puzzle,has been validated in various cathode materials for *** this review,we first thoroughly understand the intrinsic mechanism of Mg^(2+)diffusion in cathode materials,from which the key factors affecting ion diffusion are further ***,the positive effects of purposely introduced defects,including vacancy and doping,and the corresponding strategies for introducing various defects are *** applications of defect engineering in cathode materials for RMBs with advanced electrochemical properties are also ***,the existing challenges and future perspectives of defect engineering in cathode materials for the overall high-performance RMBs are described.

关键词： Rechargeable magnesium battery Sluggish diffusion kinetic Defect engineering Cathode materials Ion migration