检索结果-南通市图书馆

Chinese Journal of Electronics 2024年第4期33卷 1093-1103页

作者： Yangzhe LIAO Lin LIU Yuanyan SONG Ning XU school of Information engineering Wuhan University of Technology

Joint communication-caching-computing resource allocation in wireless inland waterway communications enables resource-constrained unmanned surface vehicles(USVs) to provision computation-intensive and latencysensitive tasks forward beyond fifth-generation(B5G) and sixth-generation(6G) era. The power of such resource allocation cannot be fully studied unless bidirectional data computation is properly managed. A novel intelligent reflecting surface(IRS)-assisted hybrid UAV-terrestrial network architecture is proposed with bidirectional tasks. The sum of uplink and downlink bandwidth minimization problem is formulated by jointly considering link quality, task execution mode selection, UAVs trajectory, and task execution latency constraints. A heuristic algorithm is proposed to solve the formulated challenging problem. We divide the original challenging problem into two subproblems, i.e., the joint optimization problem of USVs offloading decision, caching decision and task execution mode selection, and the joint optimization problem of UAVs trajectory and IRS phase shift-vector design. The Karush–Kuhn–Tucker conditions are utilized to solve the first subproblem and the enhanced differential evolution algorithm is proposed to solve the latter one. The results show that the proposed solution can significantly decrease bandwidth consumption in comparison with the selected advanced algorithms. The results also prove that the sum of bandwidth can be remarkably decreased by implementing a higher number of IRS elements.

关键词： Wireless communication Heuristic algorithms Bandwidth Network architecture Downlink Trajectory Resource management

Large eddy simulation of boundary layer combustion of hydrogen and hydrocarbon fuel films in a modeled scramjet combustor

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第7期37卷 109-133页

作者： Jianfei WEI Silong ZHANG Jingying ZUO Xin LI Jiang QIN Wen BAO school of Energy Science and engineering Harbin Institute of TechnologyHarbin 150001China

Supersonic fuel film cooling is a promising way to simultaneously reduce the severe wall heat and friction load of the internal passage in a scramjet engine when operating at hypersonic *** eddy simulations were performed to investigate the cooling and wall friction characteristics of hydrogen and hydrocarbon films under inert and reactive *** results show that the essential difference of the turbulent state in the mixing layer contributes to the totally different behaviors of the cooling and wall friction reduction performances of the two fuel *** turbulent transport processes between the hydrogen film and the mainstream are much weaker as compared to the case of hydrocarbon film,making inert hydrogen rather superior in cooling and friction reduction ***,the increase of wall temperature for hydrogen film under the inert case is mainly driven by the loss of hydrogen with high heat capacity instead of by direct heat ***,the film cooling performance severely deteriorates when the hydrogen film burns due to presence of severe heat release sources near the *** the other hand,combustion of hydrocarbon film in the boundary layer can remarkably improve its originally barely-satisfactory cooling and friction reduction performance to the level comparable to that of hydrogen film,due to the suppression of turbulent transport processes in the mixing layer and presence of heat absorption sources near the ***,the hydrogen film is more advantageous in friction reduction,while the hydrocarbon film is more suitable for cooling.

关键词： Supersonic film cooling Hydrogen Hydrocarbon Boundary layer combustion Large eddy simulation

A self-powered solar-blind UV-enhanced Bi_(2)Se_(3)/a-Ga_(2)O_(3)/p-Si heterojunction photodetector for full spectral photoresponse and imaging

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第4期17卷 2960-2970页

作者： Yajie Han Shujie Jiao Jiangcheng Jing Lei Chen Ping Rong Shuai Ren Dongbo Wang Shiyong Gao Jinzhong Wang school of Materials Science and engineering Harbin Institute of TechnologyHarbin 150001China

Self-powered full-spectrum photodetectors(PDs)offer numerous advantages,such as broad application fields,high precision,efficiency,and multi-functionality,which represent a highly promising and potentially valuable class of detectors for future ***,insensitive response to solar-blind ultraviolet(UV)and complex and expensive preparation processes greatly limit their performance and practical *** this study,a self-powered full-spectrum Bi_(2)Se_(3)/a-Ga_(2)O_(3)/p-Si heterojunction PD with high sensitivity for solar-blind UV band prepared by a simple and low-cost two-step synthesis method is *** results reveal that the developed PD has an excellent performance,such as high sensitivity from 200 to 850 nm,and a responsivity of 1.38 mA/W as well as a detectivity of 3.22×10^(10) Jones under 254 nm light at zero ***,the unencapsulated device displays exceptional stability and imaging *** is expected that Bi_(2)Se_(3)/a-Ga_(2)O_(3)/p-Si heterojunction PD with a simple and low-cost synthesis method has great potential for self-powered full-spectrum photodetectors.

关键词： Bi_(2)Se_(3)/a-Ga_(2)O_(3)/p-Si self-powered photodetector full spectral photoresponse imaging

Multiscale microstructural consideration of enhanced shear strength in TiAl intermetallic/K4169 alloy composite joints prepared by vacuum brazing with(Ti,Zr)-Ni-based amorphous filler metal

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & technology 2024年第5期172卷 51-70页

作者： Liangliang Zhang Honggang Dong Peng Li Baosheng Wu Yueting Ma Libing Huang Chao Li Jiachen Li school of Materials Science and engineering Dalian University of TechnologyDalian 116024China

TiAl intermetallic could be used to replace Ni-based alloy in assemblies to generate excellent specific strength.A(Ti,Zr)-Ni-based amorphous filler metal Ti_(21.25)Zr_(25)Ni_(25)Cu_(18.75)(at.%)was designed using a cluster-plus-glue-atom model to successfully vacuum braze K4169 and TiAl bimetallic *** various brazing temperatures and holding time,the quantitative relationships between lattice distortion,grain boundary,dislocation density,and hardness,elastic modulus,shear strength of the joints were ***,the fracture mechanism of the joints was *** brazed seam mainly consisted of solid diffusion reaction layers(ZonesⅠandⅢ)and filler metal residue zone(ZoneⅡ).When the brazing temperature increased to 1030℃,grain refinement occurred in the brazed ***Ⅰwas primarily composed of(Ni)ss[0-11]+TiNi[011]/(Cr,Fe,Ni)ss[0-11]/(Ti,Zr)Ni[0-1-1]+(Cr,Fe,Ni)ss[0-11].The(Ti,Zr)(Ni,Cu)[001]and(Ti,Zr)(Ni,Cu)[101]intermetallic compound-based solid solutions were formed in ZoneⅡ.And the lattice distortion of(Ti,Zr)(Ni,Cu)[101]and(Ti,Zr)(Ni,Cu)[001]was 32.05%and 14.82%,*** a result,the proportion of low angle grain boundaries(LAGBs)and deformed grains in ZoneⅡrose to 38.6%and 38.7%.In ZonesⅠandⅢ,the proportion of LAGBs reduced to 8%and 3.4%,*** the holding time increased,the long-range diffusion of Al in ZoneⅡcaused the(Ti,Zr)(Ni,Cu)[001]with cubic structure to transform into(Ti,Zr)(Ni,Cu,Al)[00-1]with hexagonal crystal system structure,where the lattice distortion was 4.42%and 10.49%for a and *** 1030℃/10 min,the average geometrically nec-essary dislocation densities(GNDs)in ZonesⅠ,ⅡandⅢwere 9.87×10^(14)m^(-2),8.55×10^(14)m^(-2)and 11.4×10^(14)m^(-2),***,the shear strength of joints reached 322 MPa due to the lattice distortion,dislocation strengthening and fine grain ***,the plastic and brittle hard phases were generated in ZoneⅡand displayed a mechanical interlocking structure tha

关键词： K4169/Ti_(21.25)Zr_(25)Ni_(25)Cu_(18.75)/TiAl composite joints Intermetallic compound-based solid solution Lattice distortion Elastic modulus

Lift-Off Effect of Koch and Circular Differential Pickup Eddy Current Probes

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Mechanical engineering 2024年第2期37卷 283-293页

作者： Guolong Chen Zheng Cao Shuaishuai Zhang Ji Wei Wei Gao Wuyin Jin school of Mechanical and Electrical engineering Lanzhou University of TechnologyLanzhou 730050China

A flexible or planar eddy current probe with a differential structure can suppress the lift-off noise during the inspection of ***,the extent of the lift-off effect on differential probes,including different coil structures,*** this study,two planar eddy current probes with differential pickup structures and the same size,Koch and circular probes,were used to compare lift-off *** eddy current distributions of the probes perturbed by 0°and 90°cracks were obtained by finite element *** analysis results show that the 90°crack can impede the eddy current induced by the Koch probe even further at relatively low lift-off *** peak-to-peak values of the signal output from the two probes were compared at different lift-off distances using finite element analysis and experimental *** addition,the effects of different frequencies on the lift-off were studied *** results show that the signal peak-to-peak value of the Koch probe for the inspection of cracks in 90°orientation is larger than that of the circular probe when the lift-off distance is smaller than 1.2 *** addition,the influence of the lift-off distance on the peak-to-peak signal value of the two probes was studied via *** indicates that the influence becomes more evident with an increase in excitation *** research discloses the lift-off effect of differential planar eddy current probes with different coil shapes and proves the detection merit of the Koch probe for 90°cracks at low lift-off distances.

关键词： Eddy current testing Differential pickup probe Fractal Koch curve Flexible eddy current probe

Crystal phase control and ignition properties of HNS/CL-20 composite microspheres prepared by microfluidics combined with emulsification techniques

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Particuology 2024年第2期85卷 241-251页

作者： Yi Liu Yunyan Guo Rui Zhu Jinqiang Zhou Zhengxu Lin Kai Han Chongwei An Jingyu Wang Bidong Wu school of Environment and Safety engineering North University of ChinaTaiyuan030051China school of engineering Beijing Institute of TechnologyBeijing100081China Shanxi Province Ultrafine Powder engineering technology Research Center Taiyuan030051China

Improved controllability and energy density of ignition agents are of great significance for the devel-opment of energetic composite *** this study,droplet microfluidics and emulsification tech-niques were combined to prepare HNS/CL-20 composite microspheres with polyglycidyl azide polymer(GAP)as the *** influence of binder content on the morphology of microspheres was investi-gated,and the microspheres were characterized and tested for particle size,crystal structure,thermal decomposition,dispersibility,mechanical sensitivity,combustion behavior and detonation *** results showed that microspheres prepared with a binder content of 3%had higher sphericity and particle size *** microspheres retained the crystal structure of both HNS and CL-20(ε-type).Compared with raw HNS,the microspheres had higher apparent activation energy,better safety per-formance,and good *** ignition experiments and detonation performance tests show that HNS/CL-20 composite microspheres have excellent ignition performance,obvious combustion flame,and significant energy release effects,which are expected to achieve high energy and high-speed response of the igniter,thus improving the ignition reliability in special environments or systems.

关键词： Droplet microfluidics Emulsification technology Energetic materials Composite microspheres Crystal phase control Ignition

Real-time UWOC miniaturized system based on FPGA and LED arrays and its application in MIMO

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Optics Letters 2024年第2期22卷 70-75页

作者：黄安殷洪玺梁彦军王建英沈众卫 school of Information and Communication engineering Dalian University of TechnologyDalian 116024China

In order to alleviate the impact of turbulence on the performance of underwater wireless optical communication(UWOC)in real time,and achieve high-speed real-time transmission and low cost and miniaturization of equipment,a 2×2 real-time multiple-input and multiple-output(MIMO)high-speed miniaturized UWOC system based on a field-programmable gate array(FPGA)and a high-power light-emitting diode(LED)array is designed in this *** terms of multiplexing gain,the imaging MIMO spatial multiplexing and high-order modulation for the first time are combined and the real-time high-speed transmission of PAM-4 signal based on the LED array light source in 12 m underwater channel at 100 Mbps rate is implemented,which effectively improves the throughput of the UWOC system with a high-power commercial LED light *** light of diversity gain,the system employs the diversity of repeated coding scheme to receive two identical non-return-to-zero on-off keying(NRZ-OOK)signals,which can compensate the fading or flickering sublinks in real time under the bubble-like simulated turbulence condition,and has high *** our knowledge,this is the first instance of a high rate and long-distance implementation of a turbulence-resistant real-time MIMO miniaturized UWOC system based on FPGA and high-power LED *** spatial diversity or spatial multiplexing capabilities,its low cost,integrity,and high robustness provide the system with important practical prospects.

关键词： underwater wireless optical communication MIMO spatial diversity spatial multiplexing

Effects of Number of Bleed Holes on Shock-Wave/Boundary-Layer Interactions in a Transonic Compressor Stator

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第2期33卷 611-624页

作者： LI Bai ZHOU Xun LUO Lei DU Wei school of Energy Science and engineering Harbin Institute of TechnologyHarbin150001China

An extensive numerical investigation is conducted to characterize the flow separation control in a transonic compressor cascade with a porous *** bleed holes are arranged on the suction surface in a single row,two staggered rows and three staggered *** each bleed scheme,five bleed pressure ratios are examined at an inlet Mach number of *** results indicate that the aerodynamic performance of the cascade is significantly improved by the porous *** the single-row scheme,the maximum reduction in total pressure losses is 57%.For the two-staggered-row and three-staggered-row schemes,there is an optimal bleed pressure ratio of 1.0,and the maximum reductions in total pressure loss are 68% and 75%,*** low loss in the cascade is due to the well-controlled boundary *** new local supersonic region created by the bleed hole is the key reason for the improved boundary *** vortex induced by side bleeding provides another mechanism for delaying flow *** the bleed holes could create multiple local supersonic regions,which reduce the range of the adverse pressure gradient that the boundary layer needs to *** is the reason why cascades with more bleed holes perform better.

关键词： transonic compressor stator shock wave/boundary layer interaction porous bleed number of bleed holes

An automatic Q-factor matching method for eliminating 77%of the ZRO of a MEMS vibratory gyroscope in rate mode

在线全文

学校读者我要写书评

暂无评论

Microsystems & Nanoengineering 2024年第3期10卷 35-48页

作者： Jingbo Ren Tong Zhou Yi Zhou Yixuan Li Yan Su school of Mechanical engineering Nanjing University of Science and TechnologyNanjing 210000China

Mismatching quality factors(Q-factors)is one of the main factors causing zero-rate output(ZRO)in degenerate(DE)Micro-Electro-Mechanical Systems(MEMS)vibratory *** eliminate the ZRO of the DE MEMS gyroscope,this study introduces a method for real-time identification and automatic matching of Q-factors in rate *** leveraging the vibration characteristics of the DE MEMS vibratory gyroscope in rate mode,dedicated online test methods are designed to determine the Q-factors for both the drive and sense modes,enabling online identification of the Q-factor ***,an automatic Q-factor matching system is designed utilizing the mechanical-thermal dissipation mechanism of the resistive *** effectiveness of this proposed method is validated through simulations and experiments conducted on a MEMS disk resonator gyroscope(DRG).The results show a measurement error within 4%for Q-factor identification,and automatic Q-factor matching effectively reduces the ZRO by 77%.Employing this automatic Q-factor matching method successfully reduces the ZRO that is caused by the mismatching of Q-factors in the MEMS DRG from 0.11°/s to 0.025°/s and improves the bias instability(BI)from 0.40°/s to 0.19°/s.

关键词： matching mode method

Nonlinear robust adaptive control for bidirectional stabilization system of all-electric tank with unknown actuator backlash compensation and disturbance estimation

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Defence technology（防务技术） 2024年第2期32卷 144-158页

作者： Shusen Yuan Wenxiang Deng Jianyong Yao Guolai Yang school of Mechanical engineering Nanjing University of Science and TechnologyNanjing210094China

Since backlash nonlinearity is inevitably existing in actuators for bidirectional stabilization system of allelectric tank,it behaves more drastically in high maneuvering *** this work,the accurate tracking control for bidirectional stabilization system of moving all-electric tank with actuator backlash and unmodeled disturbance is *** utilizing the smooth adaptive backlash inverse model,a nonlinear robust adaptive feedback control scheme is *** unknown parameters and unmodelled disturbance are addressed separately through the derived parametric adaptive function and the continuous nonlinear robust *** the unknown backlash parameters are updated via adaptive function and the backlash effect can be suppressed successfully by inverse operation,which ensures the system ***,the system disturbance in the high maneuverable environment can be estimated with the constructed adaptive law online improving the engineering ***,Lyapunov-based analysis proves that the developed controller can ensure the tracking error asymptotically converges to zero even with unmodeled disturbance and unknown actuator *** co-simulations and experiments illustrate the advantages of the proposed approach.

关键词： Bidirectional stabilization system Robust control Adaptive control Backlash inverse Disturbance estimation