检索结果-南通市图书馆

Chinese Journal of aeronautics 2025年第1期38卷 115-130页

作者： Yang LIU Ningsong QU Hansong LI Zhaoyang ZHANG school of Mechanical Engineering Jiangsu UniversityZhenjiang 212013China National Key Laboratory of Science and technology on Helicopter Transmission Nanjing University of Aeronautics and AstronauticsNanjing 210016China

Large size titanium alloy parts are widely used in ***,they are difficult to manufacture using mechanical cutting technology because of severe tool *** jet machining is a promising technology to achieve high efficiency,because it has high machining flexibility and no machining tool ***,reports on the macro electrochemical jet machining of large size titanium alloy parts are very scarce,because it is difficult to achieve effective constraint of the flow field in macro electrochemical jet *** addition,titanium alloy is very sensitive to fluctuation of the flow field,and a turbulent flow field would lead to serious stray *** paper reports a series of investigations of the electrochemical jet machining of titanium alloy *** on the flow analysis and experiments,the machining flow field was effectively ***6 titanium alloy part with a perimeter of one meter was *** machined surface was smooth with no obvious machining *** machining process was particularly stable with no obvious spark *** research provides a reference for the application of electrochemical jet machining technology to achieve large allowance material removal in the machining of large titanium alloy parts.

关键词： Electrochemical jet machining Titanium alloys Large size parts Flow simulation Turbulent flow

Dynamic modeling of a three-dimensional braided composite thin plate considering braiding directions

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2025年第1期46卷 123-138页

作者： Chentong GAO Huiyu SUN Jianping GU W.M.HUANG College of Aerospace Engineering Nanjing University of Aeronautics and Astronautics school of Mechanical and Aerospace Engineering Nanyang Technological University Jiangsu Key Laboratory of Advanced Structural Materials and Application technology School of Materials Science and EngineeringNanjing Institute of Technology

Currently, there are a limited number of dynamic models available for braided composite plates with large overall motions, despite the incorporation of three-dimensional(3D) braided composites into rotating blade components. In this paper, a dynamic model of 3D 4-directional braided composite thin plates considering braiding directions is established. Based on Kirchhoff's plate assumptions, the displacement variables of the plate are expressed. By incorporating the braiding directions into the constitutive equation of the braided composites, the dynamic model of the plate considering braiding directions is obtained. The effects of the speeds, braiding directions, and braided angles on the responses of the plate with fixed-axis rotation and translational motion, respectively, are investigated. This paper presents a dynamic theory for calculating the deformation of 3D braided composite structures undergoing both translational and rotational motions. It also provides a simulation method for investigating the dynamic behavior of non-isotropic material plates in various applications.

关键词： braiding direction composite thin plate dynamic model large overall motion O313.7 three-dimensional (3D) braided composite

Prediction of microstructure evolution of ZK61 alloy during hot spinning by internal state variable model

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Transactions of Nonferrous Metals Society of China 2025年第1期35卷 126-142页

作者： Jin-qi PAN Wen-cong ZHANG Jian-lei YANG Song-hui WANG Yong WU Huan LI school of Materials Science and Engineering Harbin Institute of Technology WeihaiWeihai 264209China College of Mechanical and Electrical Engineering Nanjing University of Aeronautics and AstronauticsNanjing 210016China

An internal state variable(ISV)model was established according to the experimental results of hot plane strain compression(PSC)to predict the microstructure evolution during hot spinning of ZK61 *** effects of the internal variables were considered in this ISV model,and the parameters were optimized by genetic *** validation,the ISV model was used to simulate the evolution of grain size(GS)and dynamic recrystallization(DRX)fraction during hot spinning via Abaqus and its subroutine *** comparing the simulated results with the experimental results,the application of the ISV model was proven to be ***,the strength of the thin-walled spun ZK61 tube increased from 303 to 334 MPa due to grain refinement by DRX and texture ***,some ultrafine grains(0.5μm)that played an important role in mechanical properties were formed due to the proliferation,movement,and entanglement of dislocations during the spinning process.

关键词： internal state variable model hot spinning ZK61 alloy finite element simulation texture evolution

Axial emission characteristics of an ionic liquid electrospray thruster with a circular emitter

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of aeronautics 2025年第1期38卷 297-305页

作者： Cheng YANG Jiawei LUO Xiangbei WU Yan SHEN school of aeronautics and astronautics Sun Yat-sen UniversityShenzhen 518107China Shenzhen Key Laboratory of Intelligent Microsatellite Constellation Shenzhen 518107China

Ionic Liquid Electrospray Thrusters(ILETs)are well suited for micro-nano satellite applications due to their small size,low power consumption,and high specific ***,the limited thrust of a single-emitter ILET restricts its use in space *** optimize the performance of ILETs and make them suitable for a wider range of space missions,we designed a Circular-emitter ILET(CILET)to convert a one-dimensional(point)emission into a twodimensional(line)*** CILET can self-organize multiple Taylor cones *** cones were photographed and the axial emission currents were measured under different voltage and pressure difference conditions with a CILET experimental *** emission can be divided into two stable states and one unstable state based on the flow and current *** current in Stable state Ⅰ increases non-linearly with the voltage,while that in Stable state Ⅱ is nearly linear with respect to the *** number of cones increases with the voltage in stable states,while the cones become short and crowded under high-voltage *** variation law of the number of cones can be explained with the self-organization *** variation in the current exhibits a good correlation with the number of *** study demonstrates the feasibility of circular emitters and experimentally indicates that the emission current is improved by approximately two orders of magnitude compared to that of a single capillary.

关键词： Electrospray Ionic liquid thruster Self-organize Emitter Taylor cone

Experimental verification of a PIV-based pressure field reconstruction technology in supersonic flows

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China Technological Sciences 2025年第3期68卷 243-261页

作者： Jie TIAN Jinglei XU Shun LIU Le CAI College of Energy and Power Engineering Nanjing University of Aeronautics and Astronautics State Key Laboratory of Mechanics and Control of aeronautics and astronautics Structures Nanjing University of Aeronautics and Astronautics school of Energy and Power Engineering Jiangsu University

This study proposes a novel approach that involves applying the flux vector splitting(FVS) technique to discretize and approximate conservative Navier-Stokes equations and thus reconstruct pressure fields from planar velocimetry data in compressible flows, especially for supersonic flows with strong shocks. Data are typically resolved by using the particle image velocimetry(PIV) technique. Two supersonic experiments under Mach 2.9–3.0 conditions were conducted to generate strong shocks and investigate the performance of the FVS method, including oblique shock flow and shock wave/boundary layer interaction(SWBLI) coupled with flow separation. Reconstructed pressure fields were comprehensively evaluated. The shock polar results indicated that FVS method possessed higher accuracy in post-shock regions with a pressure ratio error of less than2%, especially for the areas downstream of the shock-shock intersection point and the shock-boundary intersection point, where the conventional Poisson method was ineffective and larger errors accumulated. Wall pressure in SWBLI flow also had better agreement. Furthermore, the performances of different methods were discussed from the perspective of the physical characteristics in supersonic flows, which explained the superiority of the FVS method because the pressure information was delivered along the characteristic direction of physical waves.

关键词： particle image velocimetry supersonic flow pressure reconstruction flux vector splitting technique

A high maneuvering motion strategy and stable control method for tandem twin-rotor aerial-aquatic vehicles near the water surface

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Defence technology(防务技术) 2025年第2期44卷 206-220页

作者： Sifan Wu Maosen Shao Sihuan Wu Zhilin He Hui Wang Jinxiu Zhang Yuan Liu school of aeronautics and astronautics Sun Yat-sen UniversityShenzhen518107China Southern Marine Science and Engineering Guangdong Laboratory Zhuhai519000China

The maneuverability and stealth of aerial-aquatic vehicles(AAVs)is of significant importance for future integrated air-sea combat *** improve the maneuverability and stealth of AAVs near the water surface,this paper proposed a high-maneuverability skipping motion strategy for the tandem twin-rotor AAV,inspired by the motion behavior of the flying fish to avoid aquatic and aerial predators near the water *** novel tandem twin-rotor AAV was employed as the research subject and a strategybased ADRC control method for validation,comparing it with a strategy-based PID control *** results indicate that both control methods enable the designed AAV to achieve high stealth and maneuverability near the water surface with robust control *** strategy-based ADRC control method exhibits a certain advantage in controlling height,pitch angle,and reducing impact *** motion strategy will offer an inspiring approach for the practical application of AAVs to some extent.

关键词： Tandem twin-rotor Aerial-aquatic vehicle High maneuvering motion strategy Active disturbance rejection controller Skipping on water surface

维普期刊数据库

Recent developments in MQL machining of aeronautical materials:A comparative review

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of aeronautics 2025年第1期38卷 43-69页

作者： Syed Hammad ALI Yu YAO Bangfu WU Biao ZHAO Wenfeng DING Muhammad JAMIL Ahmar KHAN Asra BAIG Qi LIU Dongdong XU National Key Laboratory of Science and technology on Helicopter Transmission Nanjing University of Aeronautics and AstronauticsNanjing 210016China Department of Mechanical Engineering NED University of Engineering and TechnologyKarachi 75270Pakistan Centre for Precision Manufacturing University of StrathclydeGlasgow G11XQUK school of Mechanical Engineering Tongji UniversityShanghai 200092China

Minimum quantity lubrication(MQL),as a new sustainable and eco-friendly alternative cooling/lubrication technology that addresses the limitations of dry and wet machining,utilizes a small amount of lubricant or coolant to reduce friction,tool wear,and heat during cutting *** technique has witnessed significant developments in recent years,such as combining MQL with other sustainable techniques to achieve optimum results,using biodegradable lubricants,and innovations in nozzle designs and delivery *** review presents an in-depth analysis of machining characteristics(e.g.,cutting forces,temperature,tool wear,chip morphology and surface integrity,etc.)and sustainability characteristics(e.g.,energy consumption,carbon emissions,processing time,machining cost,etc.)of conventional MQL and hybrid MQL techniques like cryogenic MQL,Ranque-Hilsch vortex tube MQL,nanofluids MQL,hybrid nanofluid MQL and ultrasonic vibration assisted MQL in machining of aeronautical ***,the latest research and developments are analyzed and summarized in the field of MQL,and provide a detailed comparison between each technique,considering advantages,challenges,and limitations in practical *** addition,this review serves as a valuable source for researchers and engineers to optimize machining processes while minimizing environmental impact and operational ***,the potential future aspects of MQL for research and industrial execution are discussed.

关键词： Aerospace materials Minimum Quantity Lubrication(MQL) Cryogenic Nanofluid Grinding Milling Sustainability

A single-pixel elemental imaging method using neutron-induced gamma-ray activation

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nuclear Science and Techniques 2025年第1期36卷 1-12页

作者： Can Cheng Yong-Ji Xie Xun-Rong Xia Jia-Yu Gu Dong Zhao Yi-Ze Chen Ai-Yun Sun Xu-Wen Liang Wen-Bao Jia Da-Qian Hei Department of Ionizing Radiation and Medical Engineering Jiangsu Institute of MetrologyNanjing 210023China Institute of Nuclear Analytical technology Nanjing University of Aeronautics and AstronauticsNanjing 211106China China Nuclear Power Engineering Co. LtdBeijing 100840China school of Nuclear Science and technology Lanzhou UniversityLanzhou 730000China

Neutron-induced gamma-ray imaging is a spectroscopic technique that uses characteristic gamma rays to infer the elemental distribution of an ***,this technique requires the use of large facilities to supply a high neutron flux and a time-consuming detection procedure involving direct collimating *** this study,a new method based on low neutron flux was proposed.A single-pixel gamma-ray detector combined with random pattern gamma-ray masks was used to measure the characteristic gamma rays emitted from the *** of the elemental distribution in the sample,comprising 30×30 pixels,were reconstructed using the maximum-likelihood expectation-maximization *** results demonstrate that the elemental imaging of the sample can be accurately determined using this *** proposed approach,which eliminates the need for high neutron flux and scanning measurements,can be used for in-field imaging applications.

关键词： Elemental imaging Neutron-induced gamma-ray activation Single-pixel imaging

维普期刊数据库

Utilizing electronic assisted enhancement:An innovative approach for studying the thermal decomposition and combustion of ionic liquids

在线全文

学校读者我要写书评

暂无评论

Defence technology(防务技术) 2025年第2期44卷 179-189页

作者： Cailing Zhang Yutao Wang Baiquan Chen Zhenguo Pang Hongqi Nie Quan Zhu Peijin Liu Wei He College of Chemical Engineering Sichuan UniversityChengdu 610065China school of aeronautics and astronautics Sichuan UniversityChengdu 610065China school of Environmental and Safety Engineering North University of ChinaTaiyuan 030051China Science and technology on Combustion Internal Flow and Thermostructure LaboratoryNorthwestern Polytechnical UniversityXi'an 710072China

Flammable ionic liquids exhibit high conductivity and a broad electrochemical window,enabling the generation of combustible gases for combustion via electrochemical decomposition and thermal *** characteristic holds significant implications in the realm of novel satellite *** a fraction of the electrical energy into energetic ionic liquid fuels,the thermal decomposition process is facilitated by reducing the apparent activation energy required,and electrical energy can trigger the electrochemical decomposition of ionic liquids,presenting a promising approach to enhance combustion efficiency and energy *** study applied an external voltage during the thermal decomposition of 1-ethyl-3-methylimidazole nitrate([EMIm]NO_(3)),revealing the effective alteration of the activation energy of[EMIm]NO_(3).The pyrolysis,electrochemical decomposition,and electron assisted enhancement products were identified through Thermogravimetry-Differential scanning calorimetry-Fourier transform infrared-Mass spectrometry(TG-DSC-FTIR-MS)and gas chromatography(GC)analyses,elucidating the degradation mechanism of[EMIm]NO_(3).Furthermore,an external voltage was introduced during the combustion of[EMIm]NO_(3),demonstrating the impact of voltage on the combustion process.

关键词： Flammable ionic liquids Kinetic methods Electron assisted enhanced thermal decomposition Electron assisted enhanced combustion

维普期刊数据库

Ultrasonic vibration-assisted cutting of titanium alloys:A state-of-the-art review

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of aeronautics 2025年第1期38卷 3-42页

作者： Ahmar KHAN Xin WANG Biao ZHAO Wenfeng DING Muhammad JAMIL Aqib Mashood KHAN Syed Hammad ALI Sadam HUSSAIN Jiong ZHANG Raj DAS National Key Laboratory of Science and technology on Helicopter Transmission Nanjing University of Aeronautics and AstronauticsNanjing 210016China Department of Mechanical Engineering College of EngineeringCity University of Hong KongHong Kong 999077China Centre for Additive Manufacturing School of EngineeringAerospace Engineering and AviationRMIT UniversityVictoria 3083Australia

The remarkable ability of titanium alloys to preserve their superior physical and chemical characteristics when subjected to extreme conditions significantly enhances their importance in the aerospace,military,and medical ***,conventional machining of titanium alloys leads to elevated tool wear,development of surface defects,and reduced machining efficiency due to their low heat conductivity,and chemical *** issues can be somewhat counteracted by integrating ultrasonic vibration in the conventional machining of titanium alloys and also enhance *** review article offers a holistic evaluation of the influence of ultrasonic vibration-assisted milling and turning on cutting forces,temperature,tool wear,and surface integrity,encompassing surface morphology,surface roughness,surface residual stress,surface hardness,and surface tribological properties during titanium alloys ***,it investigates the sustainability aspect that has not been previously *** on the performance of ultrasonic-assisted cutting revealed several advantages,including decreased cutting forces and cutting temperature,improved tool life,and a better-machined surface during ***,the sustainability factor is improved due to minimized energy consumption and residual *** conclusion,the key challenges and future prospects in the ultrasonic-assisted cutting of titanium alloys are also *** review article provides beneficial knowledge for manufactur-ers and researchers regarding ultrasonic vibration-assisted cutting of titanium alloy and will play an important role in achieving sustainability in the industry.

关键词： Ultrasonic vibration-assisted cutting Titanium alloys Material removal mechanism Machinability Sustainability