检索结果-南通市图书馆

Enrichment of anammox biomass during mainstream wastewater treatment driven by achievement of partial denitrification through the addition of bio-carriers

引用

Journal of Environmental Sciences 2024年第3期137卷 181-194页

作者： Yuqing Ma Bo Wang Xiaodi Li Shuo Wang Wen Wang Yongzhen Peng National engineering laboratory for advanced Municipal Wastewater Treatment and Reuse Technology Engineering Research Center of BeijingBeijing University of TechnologyBeijing 100124China

Anammox is widely considered as the most cost-effective and sustainable process for nitrogen ***,how to achieve the enrichment of anammox biomass remains a challenge for its large-scale application,especially in mainstream wastewater *** this study,the feasibility of enrichment of anammox biomass was explored through the realization of partial denitrification and the addition of *** using ordinary activated sludge,a sequencing batch reactor(SBR)followed by an up-fow anaerobic sludge bed(UASB)was operated at 25±2℃ for 214 *** long-term operation was divided into five phases,in which SBR and UASB were started-up in Phases I and II,*** eliminating oxygen and adjusting the infow ratios in Phases III-V,advanced nitrogen removal was achieved with the effuent total nitrogen being 4.7 mg/L and the nitrogen removal efficiency being 90.5%in Phase *** in-situ and ex-situ activity tests demonstrated the occurrence of partial denitrification and ***,16S rRNA high-throughput sequencing analysis revealed that Candidatus Brocadia was enriched from below the detection limit to in biofilms(0.4%in SBR,2.2%in UASB)and the foc sludge(0.2%in SBR,1.3%in UASB),while Thauera was mainly detected in the foc sludge(8.1%in SBR,8.8%in UASB),which might play a key role in partial ***,this study provides a novel strategy to enrich anammox biomass driven by rapid achievement of partial denitrification through the addition of bio-carriers,which will improve large-scale application of anammox processes in mainstream wastewater treatment.

关键词： Enrichment Anammox biomass Bio-carriers Partial denitrification Mainstream wastewater

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Microstructure evolution and strengthening mechanism of high -performance powder metallurgy TA15 titanium alloy by hot rolling

引用

International Journal of Minerals,Metallurgy and Materials 2024年第6期31卷 1426-1436页

作者： Ying Gao Ce Zhang Jiazhen Zhang Xin Lu Beijing advanced Innovation Center for Materials Genome engineering State Key Laboratory for Advanced Metals and MaterialsInstitute for Advanced Ma-terials and TechnologyUniversity of Science and Technology BeijingBeijing 100083China National engineering research Center for advanced Rolling Technology National Engineering Research Center for Flat Rolling EquipmentInstitute of Engin-eering TechnologyUniversity of Science and Technology BeijingBeijing 100083China

Hot deformation of sintered billets by powder metallurgy(PM)is an effective preparation technique for titanium alloys,which is more significant for high-alloying *** this study,Ti–6.5Al–2Zr–Mo–V(TA15)titanium alloy plates were prepared by cold press-ing sintering combined with high-temperature hot *** microstructure and mechanical properties under different process paramet-ers were *** microscope,electron backscatter diffraction,and others were applied to characterize the microstructure evolution and mechanical properties strengthening *** results showed that the chemical compositions were uniformly dif-fused without segregation during sintering,and the closing of the matrix craters was accelerated by increasing the sintering *** block was hot rolled at 1200℃ with an 80%reduction under only two passes without *** strength and elongation of the plate at 20–25℃ after solution and aging were 1247 MPa and 14.0%,respectively,which were increased by 24.5%and 40.0%,respect-ively,compared with the as-sintered alloy at 1300℃.The microstructure was significantly refined by continuous dynamic recrystalliza-tion,which was completed by the rotation and dislocation absorption of the substructure surrounded by low-angle grain *** hot rolling combined with heat treatment,the strength and plasticity of PM-TA15 were significantly improved,which resulted from the dense,uniform,and fine recrystallization structure and the synergistic effect of multiple slip systems.

关键词： elemental powder powder metallurgy titanium alloy hot rolling strength and plasticity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Enhancement of liquid-liquid micromixing performance in curved capillary microreactor by generation of Dean vortices

引用

Chinese Journal of Chemical engineering 2024年第4期68卷 76-82页

作者： Shaoyun Wu Zhuang Ma Zichi Yang Suying Zhao Caijin Zhou Huidong Zheng Fujian engineering research Center of advanced Manufacturing Technology for Fine Chemicals College of Chemical EngineeringFuzhou UniversityFuzhou 350108China Qingyuan Innovation laboratory Quanzhou362114China

Micromixing efficiency is an important parameter for evaluating the multiphase mass transfer performance and reaction efficiency of *** this work,the novel curved capillary reactor with different shapes was designed to generate Dean flow,which was used to enhance the liquid-liquid micromixing *** Villermaux-Dushman probe reaction was employed to characterize the micromixing performance in different curved capillary *** effects of experiment parameters such as liquid flow rate,inner diameter,tube length,and curve diameter on micromixing performance were systematically *** the optimal conditions,the minimum value of the segmentation factor XS was *** was worth noting that at the low Reynolds number(Re<30),the change of curved shape on the capillary microreactor can significantly improve the micromixing performance with XS reduced by 37.5%.Further,the correlations of segment index XS with dimensionless factor such as Reynolds number or Dean number were developed,which can be used to predict the liquid-liquid micromixing performance in capillary microreactors.

关键词： Microreactor Process intensification Micromixing performance Dean flow

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Tribological properties and tribomechanism of nickel nanoparticles in-situ synthesized in rapeseed oil

引用

Friction 2024年第3期12卷 474-489页

作者： Wenya XU Guangbin YANG Shengmao ZHANG Jun XU Yujuan ZHANG Tianhua SUN Ningning SONG Laigui YU Pingyu ZHANG engineering research Center for Nanomaterials Henan UniversityKaifeng 475004China State Key laboratory of Tribology in advanced Equipment Tsinghua UniversityBeijing 100084China

Nickel(Ni)nanoparticles can be enriched on the surface of iron-based frictional pairs,which provides the possibility to get rid of the competitive adsorption between the polar species of vegetable oil and the surface-active nano-additives *** this paper,nickel acetylacetonate was used as a precursor to in-situ synthesize nickel nanoparticles with an average diameter of about 12 nm in rapeseed oil(RO)as the reducing agent,surface modifier,and solvent as *** tribological properties of the as-synthesized Ni nanoparticles were evaluated with a four-ball tribometer,and their tribomechanism was investigated based on the characterizations of the tribofilm on rubbed steel surfaces by the scanning electron microscopy(SEM),transmission electron microscopy(TEM),and X-ray photoelectron spectroscopy(XPS).It was found that the Ni nanoparticles in-situ prepared in the RO with a mass fraction of 0.3%can reduce the wear scar diameter(WSD)of the steel ball by 36%.This is because,on the one hand,the Ni nanoparticles are adsorbed on the rubbed steel surfaces to repair or fill up the micro-pits and grooves *** the other hand,Ni nanoparticles participate in tribochemical reactions with atmospheric O and steel substrate to form the tribochemical reaction film on the rubbed steel surfaces with the assistance of friction-induced heat and applied normal *** addition,an amorphous carbon film is formed on the rubbed surface via the carbonization of base oil under the catalysis of Ni *** adsorbed Ni layer,the tribochemical reaction film,and the carbon layer comprise a composite tribofilm composed of amorphous carbon,polar fatty acid,metallic nickel,iron oxides,and nickel oxides on the rubbed steel surfaces,which contributes to significantly improving the antiwear ability and load-carrying capacity of the RO for the steel-steel sliding pair.

关键词： nickel(Ni)nanoparticles rapeseed oil(RO) in-situ synthesis tribological properties tribomechanism

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Precipitating thermally reinforcement phase in aluminum alloys for enhanced strength at 400℃

引用

Journal of Materials Science & Technology 2024年第5期172卷 71-82页

作者： Xiang Su Yuan Lei Yang Chen Hongjie Qu Zhixiang Qi Gong Zheng Xu Liu Henggao Xiang Guang Chen National Key laboratory of advanced Casting Technologies MIIT Key Laboratory of Advanced Metallic and Intermetallic Materials TechnologyEngineering Research Center of Materials Behavior and DesignMinistry of EducationNanjing University of Science and TechnologyNanjing 210094China School of Aviation and Mechanical engineering Changzhou Institute of TechnologyChangzhou 213032China

Heat-resistant aluminum alloys are widely used in aerospace and automotive fields for manufacturing hot components due to their advantages in lightweight design and energy ***,the high-temperature strength of existing cast aluminum alloys is always limited to about 100 MPa at 350℃due to coarsening and transformation of strengthening ***,we reveal that the yield strength and ultimate tensile strength of the T6 state Al-8.4Cu-2.3Ce-1.0Mn-0.5Ni-0.2Zr alloy at 400◦C increase by 34%and 44%after re-aging at 300℃for 100 h,and its thermal strength exhibits distinguished ad-vantage over traditional heat-resistant aluminum *** enhanced elevated-temperature strength is attributed to the reprecipitation of the Ni-bearing T-Al_(20)Cu_(2)Mn_(3)phase,whose number density increases over one *** significant segregation of Ni,Ce,and Zr elements at the interfaces helps improve the thermal stability of the T *** thermostable T phase effectively strengthens the matrix by in-hibiting dislocation ***,a highly interconnected 3D intermetallic network along the grain boundaries can still remain after long-term re-aging at 300℃,which is conducive to imposing a drag on the grain boundaries at high *** finding offers a viable route for enhancing the elevated-temperature strength of heat-resistant aluminum alloys,which could provide expanded opportunities for higher-temperature applications.

关键词： Aluminum alloys Precipitation Thermally reinforcement phase Re-aging treatment High-temperature strength

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Phase-field simulation of precipitation kinetics and creep properties of Ni-Al-Cr/Ta superalloys

引用

Science China(Technological Sciences) 2024年第4期67卷 1139-1150页

作者： YANG ShuaiGe ZHANG Zan ZHUO JiCheng LONG HongLi LI YongSheng National Key laboratory of advanced Casting Technologies MIIT Key Laboratory of Advanced Metallic and Intermetallic Materials TechnologyEngineering Research Center of Materials Behavior and DesignMinistry of EducationNanjing University of Science and TechnologyNanjing 210094China

The precipitation kinetics ofγ'-Ni_(3)(Al,Ta)phase and creep properties of Ni-15Al-x Ta at.%superalloys are investigated by the crystal plasticity phase-field *** results show that the high Ta content brings a lower creep strain for the deceleration and steady creep stage,while the creep lifetime is *** large external strain intensifies the creep damage and shortens the creep life of Ni-15Al-3Ta at.%*** kinetics evolution and elements distribution are revealed in the quaternary Ni-10Al-8.5Cr-xT a(x=1.5 at.%,2.0 at.%,2.5 at.%)superalloys by the multi-component phase-field *** anti-phase boundary(APB)changes the coarsening mechanism ofγ'phase,and Ta promotes the precipitation ofγ'phase with an increasing volume fraction and particle *** composition difference betweenγ'andγphases increases with the rising of Ta content,the strong partitioning of Ta toγ'phase strengthens the partitioning of Ni and Cr toγmatrix,and Ta shows a superiority than Al in the lattice site occupation of L1_(2)-Ni_(3)(Al,X)*** an importantγ'phase forming element,the optimization of Ta content is essential for improving the mechanical properties of Ni-based superalloys.

关键词： Ni-Al-Ta alloys creep properties kinetics phase-field

来源：

维普期刊数据库

同方期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Recent advances in molecular and nanoparticle probes for fluorescent bioanalysis

引用

Nano research 2024年第7期17卷 6443-6474页

作者： Haowen Luo Lejie Tian Yaoming Zhang Yang Wu Bin Li Jianxi Liu State Key laboratory of Solidification Processing Center of Advanced Lubrication and Seal MaterialsSchool of Materials Science and EngineeringNorthwestern Polytechnical UniversityXi’an 710072China Yantai Zhongke research Institute of advanced Materials and Green Chemical engineering Shandong Laboratory of Advanced Materials and Green ManufacturingYantai 264006China State Key laboratory of Solid Lubrication Lanzhou Institute of Chemical PhysicsChinese Academy of SciencesLanzhou 730000China

With the increasing emphasis on ecological safety and physical health,the detection and treatment of harmful substances and diseases are becoming more and more ***,efficiently monitoring these biological behaviors with high accuracy and sensitivity in real-time has shown prominent research *** use of fluorescent probes to analyze organisms has gained momentum in recent years,especially in the field of organ imaging and assisted cancer therapy,where fluorescent bioanalysis demonstrates significant *** this review,we explored the latest advancements in fluorescent molecular probes(e.g.,small-molecule,macro-molecule,supramolecule)and fluorescent nanoparticle probes(e.g.,quantum dots or nanoclusters,metal-organic frameworks,polymers,complexes)used as bioanalytical tools in various assays over the last three *** also delved into their detective mechanisms,specific application areas,and characterization tools for responsive *** review aims to showcase the most recent and comprehensive research progress in fluorescent bioanalysis based on molecular and nanoparticle probes,offering guidance for future developments in the design and fabrication of fluorescent probes and their potential applications.

关键词： fluorescent biosensing bioimaging disease diagnosis tumor detection and treatment

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Long-Lasting Filtration of Oily Water by Anti-Fouling Underwater Oleophobic Sand Particles

引用

Journal of Bionic engineering 2024年第2期21卷 913-923页

作者： Xingyu Liu Junxu Chen Rui Wang Yifan Su Zhangheng Zhou Zezhong Hou Zhuoran Li Junhao Zhao Weicai Shi Xinquan Yu Zhaopeng Yu Youfa Zhang State Key laboratory of advanced Technology for Float Glass CNBM Research Institute for Advanced Glass Materials Group Co.LtdBengbu233000China Jiangsu Key laboratory of advanced Metallic Materials School of Materials Science and EngineeringSoutheast UniversityNanjing211189China research Institute of Petroleum engineering Technology of Jiangsu Oilfield Yangzhou225009China Kunshan Industrial Technology research Institute Kunshan215300SuzhouChina School of Automotive engineering Changshu Institute of TechnologyChangshu215500SuzhouChina

The produced water from the oilfield was purified with filter material and then injected back into the *** serpentine filter material was easy to harden with the increase in filtration amount,which affected the water quality.A superhydrophilic/underwater oleophobic serpentine filter material was successfully prepared by a simple method of coating modification,which exhibited long-lasting filtration of oily water,good filtration and anti-fouling properties,and resistance to *** film-forming material of the superhydrophilic/underwater oleophobic coating was composed of SiO_(2) particles with small size,which could completely and evenly cover the filter *** weight loss was only 7.6%after mechanical stirring for 90 *** with the original filter material,the superhydrophilic/underwater oleophobic serpentine filter material showed a better anti-fouling ability and resistance to *** filtration of crude oil emulsion and oil slick sewage showed a better backwashing *** 35 cycles of continuous filtration of suspended solids in wastewater,the backwashing rate reached 78.4%.The results provided an effective method for the filtration of oily wastewater in the oilfield.

关键词： Serpentine Underwater oleophobic Water immersion resistance Anti-fouling Hardening resistance

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Combo Packet:An Encryption Traffic Classification Method Based on Contextual Information

引用

Computers, Materials & Continua 2024年第4期79卷 1223-1243页

作者： Yuancong Chai Yuefei Zhu Wei Lin Ding Li State Key laboratory of Mathematical engineering and advanced Computing Information Engineering UniversityZhengzhou450001China

With the increasing proportion of encrypted traffic in cyberspace, the classification of encrypted traffic has becomea core key technology in network supervision. In recent years, many different solutions have emerged in this *** methods identify and classify traffic by extracting spatiotemporal characteristics of data flows or byte-levelfeatures of packets. However, due to changes in data transmission mediums, such as fiber optics and satellites,temporal features can exhibit significant variations due to changes in communication links and transmissionquality. Additionally, partial spatial features can change due to reasons like data reordering and *** with these challenges, identifying encrypted traffic solely based on packet byte-level features is significantlydifficult. To address this, we propose a universal packet-level encrypted traffic identification method, ComboPacket. This method utilizes convolutional neural networks to extract deep features of the current packet andits contextual information and employs spatial and channel attention mechanisms to select and locate effectivefeatures. Experimental data shows that Combo Packet can effectively distinguish between encrypted traffic servicecategories (e.g., File Transfer Protocol, FTP, and Peer-to-Peer, P2P) and encrypted traffic application categories (e.g.,BitTorrent and Skype). Validated on the ISCX VPN-non VPN dataset, it achieves classification accuracies of 97.0%and 97.1% for service and application categories, respectively. It also provides shorter training times and higherrecognition speeds. The performance and recognition capabilities of Combo Packet are significantly superior tothe existing classification methods mentioned.

关键词： Encrypted traffic classification packet-level convolutional neural network attention mechanisms

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Exploring a new path of green and efficient utilization of sinter return fine to produce composite pellets

引用

Journal of Iron and Steel research(International) 2024年第7期31卷 1610-1622页

作者： Yan-biao Chen Wen-guo Liu Hao Guo Jing-song Wang Qing-guo Xue Hai-bin Zuo State Key laboratory of advanced Metallurgy University of Science and Technology BeijingBeijing 100083China MCC Capital engineering and research Incorporation Limited Beijing 100176China

Efficient utilization of sinter return fine is an important measure to reduce cost,increase efficiency,save energy and reduce emission.A new path of green and efficient utilization of return fine was proposed to produce composite *** metallurgical properties of composite pellets under the condition of hydrogen-rich blast furnace were *** experimental results indicate that the coated concentrate was consolidated for the composite pellets through normal Fe_(2)O_(3) *** the surface of core return fine,the liquid phase formed due to its low-melting point,assimilated the adjacent concentrate,and then consolidated with the temperature *** with regular pellets,the com-pressive strength and reduction swelling index of composite pellets were decreased,but the reducibility index and softening-melting properties were *** addition,the reduction degradation index of composite pellets was sig-nificantly higher than that of ***,adding composite pellets was conducive to indirect reduction in blast furnace,reducing fuel ratio and improving production *** to the effect of the roasting system on the metallurgical properties,the roasting temperature and time were determined as 1250℃and 30 min,*** composite pellets can be produced under the traditional pelletizing process.

关键词： Sinter Return fine Composite pellet Roasting system Metallurgical property Hydrogen-rich blast furnace

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：