检索结果-南通市图书馆

Fracture behavior and mechanism of highly fragmented steel cylindrical shell under explosive loading

Defence Technology（防务技术） 2024年第6期36卷 122-132页

作者： Kang Wang Peng Chen Xingyun Sun Yufeng Liu Jiayu Meng Xiaoyuan Li Xiongwei Zheng Chuan Xiao Xi'an Modern Chemistry research institute Xi'an 710065China Shanxi Jiangyang Chemical company Limited Taiyuan 030051China Central iron&steel research institute company Limited Beijing 100081China China research and Development Academy of Machinery Equipment Beijing 100089China

An in-depth understanding of the fracture behavior and mechanism of metallic shells under internal explosive loading can help develop material designs for warheads and regulate the quantity and mass distribution of the fragments *** study investigated the fragmentation performance of a new high-carbon silicon-manganese(HCSiMn)steel cylindrical shell through fragment recovery *** with the conventional 45Cr steel shell,the number of small mass fragments produced by the HCSi Mn steel shell was significantly increased with a scale parameter of 0.57 g fitted by the Weibull distribution *** fragmentation process of the HCSi Mn shell exhibited more brittle tensile fracture characteristics,with the microcrack damage zone on the outer surface being the direct cause of its high *** the one hand,the doping of alloy elements resulted in grain refinement by forming metallographic structure of tempered sorbite,so that microscopic intergranular fracture reduces the characteristic mass of the fragments;on the other hand,the distribution of alloy carbides can exert a"pinning"effect on the substrate grains,causing more initial cracks to form and propagate along the brittle carbides,further improving the shell *** the killing power radius for light armored vehicles was slightly reduced by about 6%,the dense killing radius of HCSiMn steel projectile against personnel can be significantly increased by about 26%based on theoretical *** results provided an experimental basis for high fragmentation warhead design,and to some extent,revealed the correlation mechanism between metallographic structure and shell fragmentation.

关键词： Projectile fragmentation Fragment mass distribution Fracture mode Metallographic structure Damage power

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Properties of Ultra-low Thermal Expansion LAS Transparent Glass-ceramics Prepared by Spodumene

引用

Journal of wuhan University of Technology(Materials Science) 2024年第3期39卷 541-550页

作者：何峰何子君 ZHOU Zhiqiang TIAN Yingliang ZHAO Zhiyong School of Materials Science and Engineering Beijing University of TechnologyBeijing 100124China Department of Functional Material research Central Iron and Steel Research InstituteBeijing 100081China School of Materials Science and Engineering Wuhan University of TechnologyWuhan 430070China National Engineering research Center of FPD Glass Technology Xianyang 712000China

The glass-ceramics were prepared with the spodumene mineral as the main raw material,and the effects of ZrO_(2)replacing TiO_(2)on the samples were systematically *** results show that the substitution of ZrO_(2)for TiO_(2)is not conductive to precipitate𝛽β-quartz solid solution phase,but can improve the transparency and flexural strength of *** the glass-ceramic with the highest visible light transmittance(87%)and flexural strength(231.80 MPa)exhibits an ultra-low thermal expansion of-0.028×10^(-7)K^(-1)in the region of 30-700℃.

关键词： ultra-low thermal expansion LAS transparent glass-ceramics substitution of ZrO_(2)for TiO_(2) spodumene mineral

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Coke behavior with H_(2)O in a hydrogen-enriched blast furnace:A review

引用

International Journal of Minerals,Metallurgy and Materials 2024年第5期31卷 959-976页

作者： Feng Zhou Daosheng Peng Kejiang Li Alberto N.Conejo Haotian Liao Zixin Xiong Dongtao Li Jianliang Zhang School of Metallurgical and Ecological Engineering University of Science and Technology BeijingBeijing 100083China School of Chemical Engineering The University of QueenslandSt LuciaQLD 4072Australia Baosteel Central research institute(R&D Center of wuhan iron&steel Co. Ltd.)Wuhan 430080China Shougang research institute of Technology Shougang Group Corporation Ltd.Beijing 100043China Beijing Key Laboratory of Green Recyclable Process for iron and steel Production Technology Beijing 100043China

Hydrogen-enriched blast furnace ironmaking has become an essential route to reduce CO_(2)emissions in the ironmaking ***,hydrogen-enriched reduction produces large amounts of H_(2)O,which places new demands on coke quality in a blast *** a hydrogen-rich blast furnace,the presence of H_(2)O promotes the solution loss *** result improves the reactivity of coke,which is 20%-30%higher in a pure H_(2)O atmosphere than in a pure CO_(2)*** activation energy range is 110-300 kJ/mol between coke and CO_(2)and 80-170 kJ/mol between coke and H_(2)***_(2)and H_(2)O are shown to have different effects on coke degradation *** review provides a comprehensive overview of the effect of H_(2)O on the structure and properties of *** exploring the interactions between H_(2)O and coke,several unresolved issues in the field requiring further research were *** review aims to provide valuable insights into coke behavior in hydrogen-rich environments and promote the further development of hydrogen-rich blast furnace ironmaking processes.

关键词： hydrogen ironmaking coke behavior blast furnace gasification microstructure kinetics

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of Al content in molten steel on interaction between MgO-C refractory and SPHC steel

引用

Journal of iron and steel research International 2024年第4期31卷 838-848页

作者： Fu-bin Gao Fu-ming Wang Xiang Zhang Tian-yu Du Xin-hua Wangg School of Metallurgical and Ecological Engineering University of Science and Technology BeijingBeijing 100083China Handan iron and steel company Hegang GroupHandan 056015HebeiChina The State Key Laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan 430081HubeiChina

The effect of Al content in molten steel on the interaction between SPHC steel(0.005-0.068 wt.%Al,and 19×10^(-4)-58×10^(-4)wt.%O)and MgO-C refractory(11.63 wt.%C)was ***-metallic inclusions in the steel were examined at various periods(0,5,15,30,45,and 60 min)as well as the MgO-C interface after 60 min of corrosion at 1600℃.The results show that when MgO-C refractory comes into contact with SPHC steel,the refractory interface consists of three layers arranged from the innermost to the outermost,including the original refractory layer,the dense MgO layer,and the iron infiltration *** carbon in the MgO-C refractories and the Al content in the molten steel undergo a reaction with the MgO in the refractories,resulting in an increase in Mg concentration in the *** Al content in the molten steel from 0.005 to 0.068 wt.%causes a spinel layer to appear at the interface,and the disappearance time of Al_(2)O_(3) inclusions in the steel decreases from 60 to 30 min,while the average MgO content in inclusions ***,controlling the Al content in the molten steel and the smelting duration can help regulate the formation of spinel inclusionsinthe steel.

关键词： MgO-C refractory SPHC steel Inclusion-Spinel Al-killed steel Interfacial reaction

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Electronic-scale assessment of high-temperature oxidation mechanisms in a novel Fe-based alloy

引用

Journal of iron and steel research International 2024年第4期31卷 982-997页

作者： Wei-di Luo Ting-ping Hou Xuan Liang Dong Zhang Heng-fu Lin Yu Li Tian-liang Zhao Cheng-yang Hu Serhii Yershov Kai-ming Wu The State Key Laboratory of Refractories and Metallurgy.wuhan University of Science and Technology.wuhan 430081 HubeiChina Hubei Province Key Laboratory of Systems Science in Meallurgial Process Wuhan University of Science and Technology.Wuhan 430081.Hubei.China International research institute for steel Technology Wuhan University of Science and Technology.Wuhan 430081.HubeiChina Collaborative Innovation Center for Advanced steels w uhan University of Science and Technology.Wuhan 430081.HuleiChina

The development of alloys with high antioxidation performance is limited by the ambiguous details of the oxidation ***,based on the structures of internal oxides detected by high-resolution transmission electron microscopy,a hybrid method combining first-principles calculation,climb image nudged elastic band method and quasi-harmonic Debye model has been implemented to explain the oxidation mechanism with an emphasis on the origin of delamination and *** results showed that the delamination of oxides corresponds to the acceleration of diffusion of Cr element caused by lamellar *** reduction in the cracking occurrence at high temperature mainly results from the smaller bulk modulus of ***,the stronger chemical bonds promoted by lamellar structures also correspond to the higher crackingresistance.

关键词： Oxidation Crystal structure Diffusion Cracking-First-principles calculation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Permanent lining castable with low bulk density and thermal conductivity:bauxite castable for tundish obtained by adding pearlescent sand

引用

Journal of iron and steel research International 2024年第3期31卷 634-646页

作者： Yi Wang Jian Yang Bao Wang Hai-jun Zhang Juan Han Pei-yan Pei Wen-long Lv Jian-an Zhou The State Key Laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan 430081HubeiChina Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education Wuhan University of Science and TechnologyWuhan 430081HubeiChina wuhan research institute of Metallurgical Construction MCCWuhan 430081HubeiChina

The low thermal conductivity and light mass of castables for tundish permanent linings are crucial for minimizing the heat loss of molten *** consideration of the low bulk density and thermal conductivity of pearlescent sand,the thermal insulation performance of castables was attempted to be improved by adding pearlescent *** sand was modified to prevent the strength of its porous structure from *** modification mechanism of pearlescent sand and the effect of pearlescent sand on the performance of bauxite castables were *** results suggested that the addition of the modified pearlescent sand significantly raised the apparent porosity and decreased the bulk density of bauxite *** 1000℃,the bulk density of more than 60%of the modified pearlescent sand-bauxite castable was only 2.03 g/cm^(3).The mechanical properties and thermal shock resistance of the modified pearlescent sand-bauxite castable were inferior to those of conventional bauxite castable but were adequate to meet the use conditions of casta-bles for tundish permanent *** high temperatures of 200-800℃,the thermal conductivity of more than 60%of the modified pearlescent sand-bauxite castable was smaller than that of conventional bauxite *** addition of the modified pearlescent sand can greatly reduce the thermal conductivity and bulk density of bauxite castable.

关键词： Pearlescent sand-Hydrophobic modification Bauxite castable Thermal insulation performance Mechanical property

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Microstructure recognition of steels by machine learning based on visual attention mechanism

引用

Journal of iron and steel research International 2024年第4期31卷 909-923页

作者： Xing-yu Chen Lin Cheng Cheng-yang Hu Yu-peng Zhang Kai-ming Wu The State Key Laboratory of Refractories and Metallurgy Hubei Province Key Laboratory of Systems Science on Metallurgical ProcessingInternational Research Institute for Steel TechnologyCollaborative Center on Advanced SteelsWuhan University of Science and TechnologyWuhan 430081HubeiChina Metals Valley and Band(Foshan)Metallic Composite Materials Co. Ltd.Foshan 528000GuangdongChina

U-Net has achieved good performance with the small-scale datasets through skip connections to merge the features of the low-level layers and high-level layers and has been widely utilized in biomedical image segmentation as well as recent microstructure image segregation of the *** representative visual attention mechanism modules,named as squeeze-and-excitation networks,convolutional block attention module,and extended calibration algorithm,were intro-duced into the traditional U-Net architecture to further improve the prediction *** is found that compared with the original U-Net architecture,the evaluation index of the improved U-Net architecture has been significantly improved for the microstructure segmentation of the steels with the ferrite/martensite composite microstructure and pearlite/ferrite composite microstructure and the complex martensite/austenite island/bainite microstructure,which demonstrates the advantages of the utilization of the visual attention mechanism in the microstructure *** reasons for the accuracy improvement were discussed based on the feature maps analysis.

关键词： Microstructure recognition-steel Machine learning Visual attention mechanism Visualization

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Corrosion behavior of Al_(2)O_(3)-C bricks in MnO-containing mold slag

引用

Journal of iron and steel research International 2024年第6期31卷 1486-1492页

作者： Yi-jiang Zhao Guang-qiang Li Yang Wu Cheng Yuan Ze Meng Xiao-xuan Deng Yu Liu The State Key Laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan 430081HubeiChina Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education Wuhan University of Science and TechnologyWuhan 430081HubeiChina Hubei Provincial Key Laboratory for New Processes of ironmaking and steelmaking Wuhan University of Science and TechnologyWuhan 430081HubeiChina research institute of Technology Shougang Group Co.Ltd.Beijing 100043China

In order to explore the corrosion mechanism of Al_(2)O_(3)-C refractories in the mold flux bearing MnO,the immersion test of Al_(2)O_(3)-C refractories in CaO-SiO2-CaF2-MnO slag with different MnO contents was carried out at 1550℃.The results show that Mn particles were observed in the slag after experiment,due to the reduction of MnO by graphite in *** amounts of graphite were observed at the interface between refractories and slag,indicating that the oxidation of graphite is limited by the poor contact between graphite and molten ***,the oxidation of graphite is not the main cause of damage to refractories.A small quantity of CaO·2Al_(2)O_(3)(CA_(2))and CaO·6Al_(2)O_(3)(CA_(6))adjacent to Al_(2)O_(3) grain was detected at the slag/reaction layer ***_(2) and CA_(6) possess relatively high melting points,which is beneficial to hindering the further penetration of ***,the dissolution of Al_(2)O_(3) into slag is still the main cause for refractories *** increase in the MnO content of mold slag decreases the viscosity and then results in the severe corrosion of Al_(2)O_(3)-C bricks.

关键词： Al_(2)O_(3)-C refractory MnO-containing slag Graphite Corrosion

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

3D bioprinting of in vitro porous hepatoma models:establishment,evaluation,and anticancer drug testing

引用

Bio-Design and Manufacturing 2024年第2期7卷 137-152页

作者： Xiaoyuan Wang Zixian Liu Qianqian Duan Boye Zhang Yanyan Cao Zhizhong Shen Meng Li Yanfeng Xi Jianming Wang Shengbo Sang Shanxi Key Laboratory of Micro Nano Sensors and Artificial Intelligence Perception College of Electronic Information and Optical EngineeringTaiyuan University of TechnologyTaiyuan 030024China Key Lab of Advanced Transducers and Intelligent Control System of the Ministry of Education Taiyuan University of TechnologyTaiyuan 030024China Shanxi institute of 6D Artificial Intelligence Biomedical Science Taiyuan 030031China Shanxi-Zheda institute of Advanced Materials and Chemical Engineering Taiyuan 030024China Department of Pathology Shanxi Provincial Cancer HospitalTaiyuan 030024China General Hospital of Taiyuan iron and steel company Taiyuan 030809China

Traditional tumor models do not tend to accurately simulate tumor growth in vitro or enable personalized treatment and are particularly unable to discover more beneficial targeted *** address this,this study describes the use of threedimensional(3D)bioprinting technology to construct a 3D model with human hepatocarcinoma SMMC-7721 cells(3DP-7721)by combining gelatin methacrylate(GelMA)and poly(ethylene oxide)(PEO)as two immiscible aqueous phases to form a bioink and innovatively applying fluorescent carbon quantum dots for long-term tracking of *** GelMA(10%,mass fraction)and PEO(1.6%,mass fraction)hydrogel with 3:1 volume ratio offered distinct pore-forming characteristics,satisfactorymechanical properties,and biocompatibility for the creation of the 3DP-7721 *** analysis and quantitative real-time fluorescence polymerase chain reaction(PCR)were used to evaluate the biological properties of the *** with the two-dimensional culture cell model(2D-7721)and the 3D mixed culture cell model(3DM-7721),3DP-7721 significantly improved the proliferation of cells and expression of tumor-related proteins and ***,we evaluated the differences between the three culture models and the effectiveness of antitumor drugs in the three models and discovered that the efficacy of antitumor drugs varied because of significant differences in resistance proteins and genes between the three *** addition,the comparison of tumor formation in the three models found that the cells cultured by the 3DP-7721 model had strong tumorigenicity in nude *** evaluation of the levels of biochemical indicators related to the formation of solid tumors showed that the 3DP-7721 model group exhibited pathological characteristics of malignant tumors,the generated solid tumors were similar to actual tumors,and the deterioration was *** research therefore acts as a foundation for the application of 3DP-7721 models in drug devel

关键词： 3D bioprinting Hepatoma tumor models Drug screening Antitumor drug development

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of micro-Al_(2)O_(3) powders on oxidation and corrosion behaviors of low-carbon MgO-C refractories

引用

Journal of iron and steel research International 2024年第6期31卷 1522-1534页

作者： Yang Chen Zeng-yi Li Hao-bo Tan Yu-ran Fu Jun Ding Cheng-ji Deng Chao Yu School of Materials Science and Engineering Hunan Institute of TechnologyHengyang 421002HunanChina The State Key Laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan 430081HubeiChina

To solve the problem of poor high-temperature service performance caused by low carbonization of MgO-C refractories,low-carbon MgO–C refractories with excellent thermal shock,oxidation and corrosion resistances were successfully designed by using SiC whiskers as reinforcing phases and introducing micro-Al_(2)O_(3) powders as *** results indicated that the addition of micro-Al_(2)O_(3) powders optimized the internal structure of the material,like the columnar β-Si_(3)N_(4) with a stepped distribution and the mosaic structure formed between granular and flaky Mg_(2)SiO_(4),which synergistically strengthened and toughened the material and gave the material excellent mechanical properties and thermal shock ***,the cold modulus of rupture and cold crushing strength after thermal shock were increased by 4.1 and 20.3 MPa,***,the addition of micro-Al_(2)O_(3) powders promoted the formation of fine particles of Mg_(2)SiO_(4),MgAl_(2)O_(4) and MgO,as well as a dense protective layer of Mg_(2)SiO_(4) in the material under high-temperature ***,spinel and high-temperature solid solution were formed in the corrosion *** oxidation and corrosion resistances were greatly improved by 41%and 15%,respectively.

关键词： Low-carbon MgO-C refractory Oxidation resistance Corrosion resistance Thermal shock resistance Micro-Al_(2)O_(3)powder

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：