检索结果-南通市图书馆

Interfacial Zn2+-solvation regulator towards reversible and stable Zn anode

Journal of Energy Chemistry 2025年第1期100卷 684-692页

作者： Miao Zhou Xiongbin Luo Hang Li Shan Guo Zhuang Tong Xiaotao Zhou Xu Li Zhaohui Hou Shuquan Liang Guozhao Fang College of Mechanical Engineering Key Laboratory of Hunan Province for Advanced Carbon-based Functional Materials Hunan Institute of Science and Technology School of materials Science and Engineering Key Laboratory of Electronic Packaging and Advanced Functional Materials of Hunan Province Central South University College of materials and Metallurgy Guizhou University National Energy Metal Resources and New materials Key Laboratory Central South University

Aqueous zinc-ion batteries （AZIBs） are fundamentally challenged by the instability of the electrode/electrolyte interface,predominantly due to irreversible zinc （Zn） deposition and hydrogen ***,the intricate mechanisms behind the electrochemical discrepancies induced by interfacial Zn2+-solvation and deposition behavior demand comprehensive *** molecules endowed with special functional groups （such as hydroxyl,carboxyl,etc.） have the potential to significantly optimize the solvation structure of Zn2+and regulate the interfacial electric double layer （EDL）.By increasing nucleation overpotential and decreasing interfacial free energy,these functional groups facilitate a lower critical nucleation radius,thereby forming an asymptotic nucleation model to promote uniform Zn ***,this study presents a pioneering approach by introducing trace amounts of n-butanol as solvation regulators to engineer the homogenized Zn （H-Zn） anode with a uniform and dense *** interfacial reaction and structure evolution are explored by in/ex-situ experimental techniques,indicating that the H-Zn anode exhibits dendrite-free growth,no by-products,and weak hydrogen evolution,in sharp contrast to the bare ***,the H-Zn anode achieves a remarkable Zn utilization rate of approximately 20% and simultaneously sustains a prolonged cycle life exceeding 500 ***,the H-Zn//NH4V4O10（NVO） full battery showcases exceptional cycle stability,retaining 95.04%capacity retention after 400 cycles at a large current density of 5 A *** study enlightens solvation-regulated additives to develop Zn anode with superior utilization efficiency and extended operational lifespan.

关键词： Aqueous zinc-ion batteries Interfacial reaction Asymptotic nucleation model Reversible and stable Zn anode

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Force and impulse multi-sensor based on flexible gate dielectric field effect transistor

引用

International Journal of Minerals,Metallurgy and materials 2025年第1期32卷 214-220页

作者： Chao Tan Junling Lü Chunchi Zhang Dong Liang Lei Yang Zegao Wang College of materials Science and Engineering Sichuan UniversityChengdu 610065China The 54th research institute of China Electronics Technology Group Corporation Shijiazhuang 050081China

Nowadays,force sensors play an important role in industrial production,electronic information,medical health,and many other ***-dimensional material-based filed effect transistor(2D-FET)sensors are competitive with nano-level size,lower power consumption,and accurate ***,few of them has the capability of impulse detection which is a path function,expressing the cumulative effect of the force on the particle over a period of *** we fabricated the flexible polymethyl methacrylate(PMMA)gate dielectric MoS_(2)-FET for force and impulse sensor *** systematically investigated the responses of the sensor to constant force and varying forces,and achieved the conversion factors of the drain current signals(I_(ds))to the detected impulse(I).The applied force was detected and recorded by I_(ds)with a low power consumption of~30 *** sensitivity of the device can reach~8000%and the 4×1 sensor array is able to detect and locate the normal force applied on ***,there was almost no performance loss for the device as left in the air for two months.

关键词： flexible gate dielectric transistor force sensor impulse sensor force sensor array

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Review of precipitation strengthening in ultrahigh-strength martensitic steel

引用

International Journal of Minerals,Metallurgy and materials 2025年第2期32卷 256-269页

作者： Zhihao Tian Chunlei Shang Chaolei Zhang Xiaoye Zhou Honghui Wu Shuize Wang Guilin Wu Junheng Gao Jiaming Zhu Xinping Mao institute for Carbon Neutrality University of Science and Technology BeijingBeijing 100083China institute of Steel Sustainable Technology Liaoning Academy of MaterialsShenyang 110004China Department of materials Science and Engineering Shenzhen MSU-BIT UniversityShenzhen 518172China institute of materials Intelligent Technology Liaoning Academy of MaterialsShenyang 110004China School of Civil Engineering Shandong UniversityJinan 250061China

Martensite is an important microstructure in ultrahigh-strength steels,and enhancing the strength of martensitic steels often involves the introduction of precipitated phases within the martensitic *** considerable research efforts devoted to this area,a systematic summary of these advancements is *** review focuses on the precipitates prevalent in ultrahigh-strength martensitic steel,primarily carbides(e.g.,MC,M_(2)C,and M_(3)C)and intermetallic compounds(e.g.,Ni Al,Ni_(3)X,and Fe_(2)Mo).The precipitation-strengthening effect of these precipitates on ultrahigh-strength martensitic steel is discussed from the aspects of heat treatment processes,microstructure of precipitate-strengthened martensite matrix,and mechanical ***,a perspective on the development of precipitation-strengthened martensitic steel is presented to contribute to the advancement of ultrahigh-strength martensitic *** review highlights significant findings,ongoing challenges,and opportunities in the development of ultrahigh-strength martensitic steel.

关键词： ultrahigh-strength martensitic steel precipitation strengthening mechanical property carbide intermetallic compound

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Influence of introducing Zr,Ti,Nb and Ce elements on externally solidified crystals and mechanical properties of high-pressure die-casting Al–Si alloy

引用

International Journal of Minerals,Metallurgy and materials 2025年第1期32卷 147-153页

作者： Junjie Li Wenbo Yu Zhenyu Sun Weichen Zheng Liangwei Zhang Yanling Xue Wenning Liu Shoumei Xiong Center of materials Science and Engineering School of Mechanical and Electronic Control EngineeringBeijing Jiaotong UniversityBeijing 100044China Traffic&Transportation Engineering Central South UniversityChangsha 410075China Shanghai Synchrotron Radiation Facility Shanghai Advanced Research InstituteChinese Academy of SciencesShanghai 201204China School of materials Science and Engineering Tsinghua UniversityBeijing 100084China

High pressure die casting(HPDC)AlSi10Mn Mg alloy castings are widely used in the automobile *** can optimize the mechanical properties of castings through heat treatment,while the release of thermal stress arouses the deformation of large integrated ***,the development of non-heat treatment Al alloys is becoming the hot *** addition,HPDC contains externally solidified crystals(ESCs),which are detrimental to the mechanical properties of *** achieve high strength and toughness of non-heat treatment die-casting Al-Si alloy,we used AlSi9Mn alloy as matrix with the introduction of Zr,Ti,Nb,and *** influences on ESCs and mechanical properties were systematically investigated through three-dimensional reconstruction and thermodynamic *** results reveal that the addition of Ti increased ESCs'size and porosity,while the introduction of Nb refined ESCs and decreased ***,large-sized Al_3(Zr,Ti)phases formed and degraded the mechanical *** introduction of Ce resulted in the poisoning effect and reduced mechanical properties.

关键词： aluminium alloy high-pressure die-casting externally solidified crystals non-heat treatment

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Efficient photocatalytic reduction of CO2 to formate by a molecular noble metal-free system

引用

Science China Chemistry 2025年第1期 152-156页

作者： Lihua Zhang Lingjing Chen Huatian Shi Yue Wei Gui Chen Tai-Chu Lau School of Environment and Civil Engineering Research Center for Eco-environmental Engineering Dongguan University of Technology Department of Chemistry and institute of Molecular Functional materials City University of Hong Kong

Reducing CO2to carbon-neutral solar fuels can not only alleviate the energy demand but also mitigate the greenhouse *** present,developing an efficient non-noble metal photo/electrocatalytic system for converting CO2to a specific product beyond CO is still a big ***,we report a new cobalt complex bearing 2,2′-bi-1,10-phenanthroline ligand that can photocatalytically reduce CO2to formate （HCOO-）.Turnover number （TON） for HCOO-up to 677 with 99%selectivity can be achieved using organic dyes purpurin as photosensitizer and 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole （BIH） as sacrificial reductant in a CO2-saturated NMP/TEA （v/v,3:1） solution under visible light *** potential electrolysis at-1.41 V （***/Ag Cl） in the presence of 12 m M Et3NHBF4also produced HCOO-with Faradaic efficiency of 39%.Spectroscopic and electrochemical studies suggest that a[CoI-H]species is the key intermediate for CO2reduction.

关键词：

来源：

同方期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Robust interface and excellent as-built mechanical properties of Ti–6Al–4V fabricated through laser-aided additive manufacturing with powder and wire

引用

International Journal of Minerals,Metallurgy and materials 2025年第1期32卷 154-168页

作者： Fei Weng Guijun Bi Youxiang Chew Shang Sui Chaolin Tan Zhenglin Du Jinlong Su Fern Lan Ng Key Laboratory for Liquid-Solid Structural Evolution and Processing of materials Ministry of EducationShandong Engineering&Technology Research Center for Superhard MaterialSchool of Materials Science and EngineeringShandong UniversityJinan 250061China institute of Intelligent Manufacturing Guangdong Academy of SciencesGuangzhou 510095China Singapore institute of Manufacturing Technology 5 Cleantech Loop636732Singapore

The feasibility of manufacturing Ti-6Al-4V samples through a combination of laser-aided additive manufacturing with powder(LAAM_(p))and wire(LAAM_(w))was explored.A process study was first conducted to successfully circumvent defects in Ti-6Al-4V deposits for LAAM_(p) and LAAM_(w),*** the optimized process parameters,robust interfaces were achieved between powder/wire deposits and the forged substrate,as well as between powder and wire *** characterization results revealed the epitaxial prior β grains in the deposited Ti-6Al-4V,wherein the powder deposit was dominated by a finerα′microstructure and the wire deposit was characterized by lamellar α *** mechanisms of microstructure formation and correlation with mechanical behavior were analyzed and *** mechanical properties of the interfacial samples can meet the requirements of the relevant Aerospace Material Specifications(AMS 6932)even without post heat *** fracture occurred within the interfacial area,further suggesting the robust *** findings of this study highlighted the feasibility of combining LAAM_(p) and LAAM_(w) in the direct manufacturing of Ti-6Al-4V parts in accordance with the required dimensional resolution and deposition rate,together with sound strength and ductility balance in the as-built condition.

关键词： laser-aided additive manufacturing powder deposition wire deposition interfacial characteristic mechanical behavior

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

High-energy-density lithium manganese iron phosphate for lithium-ion batteries: Progresses, challenges, and prospects

引用

Journal of Energy Chemistry 2025年第1期100卷 1-17页

作者： Bokun Zhang Xiaoyun Wang Shuai Wang Yan Li Libo Chen Handong Jiao Zhijing Yu Jiguo Tu State Key Laboratory of Advanced Metallurgy University of Science and Technology Beijing research institute for Intelligent Wearable Systems The Hong Kong Polytechnic University institute of Advanced Structure Technology Beijing Institute of Technology

The soaring demand for smart portable electronics and electric vehicles is propelling the advancements in high-energy–density lithium-ion *** manganese iron phosphate (LiMnxFe1-xPO4) has garnered significant attention as a promising positive electrode material for lithium-ion batteries due to its advantages of low cost,high safety,long cycle life,high voltage,good high-temperature performance,and high energy *** LiMnxFe1-xPO4has made significant breakthroughs in the past few decades,there are still facing great challenges in poor electronic conductivity and Li-ion diffusion,manganese dissolution affecting battery cycling performance,as well as low tap *** review systematically summarizes the reaction mechanisms,various synthesis methods,and electrochemical properties of LiMnxFe1-xPO4to analyze reaction processes accurately and guide material ***,the main challenges currently faced are concluded,and the corresponding various modification strategies are discussed to enhance the reaction kinetics and electrochemical performance of LiMnxFe1-xPO4,including multi-scale particle regulation,heteroatom doping,surface coating,as well as microscopic morphology ***,in view of the current research challenges faced by intrinsic reaction processes,kinetics,and energy storage applications,the promising research directions are *** importantly,it is expected to provide key insights into the development of high-performance and stable LiMnxFe1-xPO4materials,to achieve practical energy storage requirements.

关键词： Lithium manganese iron phosphate High energy density Lithium-ion batteries Reaction mechanism Tap density

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

A Novel Method for Modification of SMPU by Micro-phase Separation Promoters

引用

Chinese Chemical Letters 2005年第9期16卷 1241-1244页

作者： Shao Jun CHEN Jing Cang SU Peng Sheng LIU research institute of polymeric materials Xiangtan University Xiangtan 411105

A novel method of controlling the shape memory properties of shape memory polyurethane （SMPU） by addition of micro-phase separation promoters including 1-octadecanol （ODO） and liquid paraffin （LP） is reported. The results indicate that the strain recovery temperature and the strain modulus rate （Eg/Er） were increased significantly with addition of small amount of micro-phase separation promoters. Thus it can increase the shape memory fixity rate and other shape memory behaviors of SMPU.

关键词： Shape memory polyurethane modification micro-phase separation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Maximizing biomass utilization: An integrated strategy for coproducing multiple chemicals

引用

Journal of Energy Chemistry 2025年第1期100卷 180-191页

作者： Byeongchan Ahn Sua Jo Jonggeol Na J.Jay Liu Young-Ju Kim Wangyun Won Department of Chemical and Biological Engineering Korea University Department of Chemical Engineering (Integrated process) Kyung Hee University Department of Chemical Engineering and materials Science Ewha Womans University Department of Chemical Engineering Pukyong National University Resources Engineering Plant research Department Korea Institute of Geoscience and Mineral Resources

Lignocellulosic biomass is one of the viable solutions to alleviate the global warming. However, the limited utilization of biomass majorly focused on cellulose and hemicellulose restricts the economic and environmental feasibilities. To cope with this issue, we proposed an integrated process of co-producing 1,6-hexanediol（1,6-HDO） with tetrahydrofuran and adipic acid from biomass, referred to as Strategy A. To compare the impacts of lignin upgrading and feedstock, Strategy B, which co-produces tetrahydrofuran alone, and Strategy C, which is the traditional route to produce 1,6-HDO from fossil fuels, were used. Heat networks are also designed to reduce operating costs and indirect carbon emissions due to energy consumption, saving 87% and 83% of the heat and cooling requirements, respectively, in Strategy A. The market competitiveness of Strategy A was evaluated by determining the minimum selling price through techno-economic analysis, and sustainability was thoroughly investigated by quantifying the environmental impacts through both midpoint and endpoint life-cycle assessments（LCAs）.Strategy A was found to be the most favorable both economically（USRDSCHARDOLLAR3,402/ton） and environmentally（-26.9 kg CO2eq.）. This indicates that lignin valorization is not only economically but also environmentally preferred. Finally, changes in economic and environmental feasibilities depending on economic, process, and environmental parameters were investigated using sensitivity and uncertainty analyses. The results of these analyses provide valuable insight into bio-based chemical production.

关键词： Biorefinery Carbon mitigation Climate change Global warming Lignin utilization Bioeconomy

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Effects of carbon content on the microstructure and tensile properties of a low-density steel

引用

International Journal of Minerals,Metallurgy and materials 2025年第2期32卷 391-401页

作者： Yongxuan Shang Mingyu Fan Shuyong Jiang Zhongwu Zhang Key Laboratory of Superlight materials and Surface Technology Ministry of EducationCollege of Materials Science and Chemical EngineeringHarbin Engineering UniversityHarbin 150001China State Key Laboratory of Metal Material for Marine Equipment and Application Iron&Steel Research Institute of Ansteel Group CorporationAnshan 114009China

Carbon can change the phase components of low-density steels and influence the mechanical *** this study,a new method to control the carbon content and avoid the formation ofδ-ferrite by decarburization treatment was *** microstructural changes and mechanical characteristics with carbon content induced by decarburization were systematically ***-Jaoul(C-J)analysis was employed to examine the work hardening characteristics during the tensile *** decarburization by heat treatments,the carbon content within the austenite phase decreased,while Mn and Al were almost unchanged;this made the steel with full austenite transform into the austenite and ferrite dual ***,(Ti,V)C carbides existed in both matrix phase and the mole fraction almost the *** addition,the formation of other carbides *** loss induced a decrease in strength due to the weakening of the carbon solid *** the steel with the single austinite,the deformation mode of austenite was the dislocation planar glide,resulting in the formation of *** the dual-phase steel,the deformation occurred by the dislocation planar glide of austenite first,with the increase in strain,the cross slip of ferrite took place,forming dislocation cells in *** the late stage of deformation,the work hardening of austinite increased rapidly,while that of ferrite increased slightly.

关键词： low-density steels carbon content decarburization strengthening mechanisms work hardening behavior

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：