检索结果-南通市图书馆

Microstructure evolution and strengthening mechanism of high -performance powder metallurgy TA15 titanium alloy by hot rolling

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第6期31卷 1426-1436页

作者： Ying Gao Ce Zhang Jiazhen Zhang Xin Lu Beijing Advanced Innovation Center for Materials Genome engineering State Key Laboratory for Advanced Metals and MaterialsInstitute for Advanced Ma-terials and TechnologyUniversity of Science and Technology BeijingBeijing 100083China National engineering research Center for Advanced Rolling technology National Engineering Research Center for Flat Rolling EquipmentInstitute of Engin-eering TechnologyUniversity of Science and Technology BeijingBeijing 100083China

Hot deformation of sintered billets by powder metallurgy(PM)is an effective preparation technique for titanium alloys,which is more significant for high-alloying *** this study,Ti–6.5Al–2Zr–Mo–V(TA15)titanium alloy plates were prepared by cold press-ing sintering combined with high-temperature hot *** microstructure and mechanical properties under different process paramet-ers were *** microscope,electron backscatter diffraction,and others were applied to characterize the microstructure evolution and mechanical properties strengthening *** results showed that the chemical compositions were uniformly dif-fused without segregation during sintering,and the closing of the matrix craters was accelerated by increasing the sintering *** block was hot rolled at 1200℃ with an 80%reduction under only two passes without *** strength and elongation of the plate at 20–25℃ after solution and aging were 1247 MPa and 14.0%,respectively,which were increased by 24.5%and 40.0%,respect-ively,compared with the as-sintered alloy at 1300℃.The microstructure was significantly refined by continuous dynamic recrystalliza-tion,which was completed by the rotation and dislocation absorption of the substructure surrounded by low-angle grain *** hot rolling combined with heat treatment,the strength and plasticity of PM-TA15 were significantly improved,which resulted from the dense,uniform,and fine recrystallization structure and the synergistic effect of multiple slip systems.

关键词： elemental powder powder metallurgy titanium alloy hot rolling strength and plasticity

The principle and amelioration of lithium plating in fast-charging lithium-ion batteries

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第10期97卷 453-459,I0009页

作者： Yi Yang Xia-Lin Zhong Lei Xu Zhuo-Lin Yang Chong Yan Jia-Qi Huang School of Materials Science and engineering Beijing Institute of TechnologyBeijing 100081China Advanced research institute of Multidisciplinary Science Beijing Institute of TechnologyBeijing 100081China Beijing Key Laboratory of Green Chemical Reaction engineering and technology Department of Chemical EngineeringTsinghua UniversityBeijing 100084China Yangtze River Delta Graduate School of Beijing institute of technology Jiaxing 314003ZhejiangChina

Fast charging is restricted primarily by the risk of lithium(Li)plating,a side reaction that can lead to the rapid capacity decay and dendrite-induced thermal runaway of lithium-ion batteries(LIBs).Investigation on the intrinsic mechanism and the position of Li plating is crucial to improving the fast rechargeability and safety of ***,we investigate the Li plating behavior in porous electrodes under the restricted transport of Li^(+).Based on the theoretical model,it can be concluded that the Li plating on the anodeseparator interface(ASI)is thermodynamically feasible and kinetically ***,the prior deposition of metal Li on the ASI rather than the anode-current collector interface(ACI)is verified *** order to facilitate the transfer of Li^(+)among the electrode and improve the utilization of active materials without Li plating,a bilayer asymmetric anode composed of graphite and hard carbon(GH)is *** and simulation results suggest that the GH hybrid electrode homogenizes the lithiated-rate throughout the electrode and outperforms the pure graphite electrode in terms of the rate performance and inhibition of Li *** work provides new insights into the behavior of Li plating and the rational design of electrode structure.

关键词： Graphite Hard carbon Fast charging Lithium plating Lithium-ion batteries

Insight into the capacity degradation and structural evolution of single-crystal Ni-rich cathodes

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第8期95卷 68-76,I0003页

作者： Xiaodong Zhang Jiao Lin Ersha Fan Qingrong Huang Su Ma Renjie Chen Feng Wu Li Li Beijing Key Laboratory of Environmental Science and engineering School of Materials Science and EngineeringBeijing Institute of TechnologyBeijing 100081China Advanced technology research institute Beijing Institute of TechnologyJinan 250300ShandongChina Collaborative Innovation Center of Electric Vehicles in Beijing Beijing 100081China

Single-crystal Ni-rich cathodes are a promising candidate for high-energy lithium-ion batteries due to their higher structural and cycling stability than polycrystalline ***,the phase evolution and capacity degradation of these single-crystal cathodes during continuous lithation/delithation cycling remains *** the mapping relationship between the macroscopic electrochemical properties and the material physicochemical properties is ***,we investigate the correlation between the physical-chemical characteristics,phase transition,and capacity decay using capacity differential curve feature identification and in-situ X-ray spectroscopic *** systematically clarify the dominant mechanism of phase evolution in aging *** high cut-off voltages can mitigate the slow kinetic and electrochemical properties of single-crystal *** also find that second-order differential capacity discharge characteristic curves can be used to identify the crystal structure disorder of Ni-rich *** findings constitute a step forward in elucidating the correlation between the electrochemical extrinsic properties and the physicochemical intrinsic properties and provide new perspectives for failure analysis of layered electrode materials.

关键词： Single-crystal cathodes Capacity decay Phase transition Differential capacity analysis

Properties of Ultra-low Thermal Expansion LAS Transparent Glass-ceramics Prepared by Spodumene

在线全文

学校读者我要写书评

暂无评论

Journal of Wuhan University of technology(Materials Science) 2024年第3期39卷 541-550页

作者：何峰何子君 ZHOU Zhiqiang TIAN Yingliang ZHAO Zhiyong School of Materials Science and engineering Beijing University of TechnologyBeijing 100124China Department of Functional Material research Central Iron and Steel Research InstituteBeijing 100081China School of Materials Science and engineering Wuhan University of TechnologyWuhan 430070China National engineering research Center of FPD Glass technology Xianyang 712000China

The glass-ceramics were prepared with the spodumene mineral as the main raw material,and the effects of ZrO_(2)replacing TiO_(2)on the samples were systematically *** results show that the substitution of ZrO_(2)for TiO_(2)is not conductive to precipitate𝛽β-quartz solid solution phase,but can improve the transparency and flexural strength of *** the glass-ceramic with the highest visible light transmittance(87%)and flexural strength(231.80 MPa)exhibits an ultra-low thermal expansion of-0.028×10^(-7)K^(-1)in the region of 30-700℃.

关键词： ultra-low thermal expansion LAS transparent glass-ceramics substitution of ZrO_(2)for TiO_(2) spodumene mineral

Removal of rubidium from brine by an integrated film of sulfonated polysulfone/graphene/potassium copper ferricyanide

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Chemical engineering 2024年第5期69卷 112-121页

作者： Huanxi Xu Peihua Lin Pei-Jun Liu Hai-Gang Liu Hui-Bin Guo Chao-Xiang Wu Ming Fang Xu Zhang Guan-Ping Jin Anhui Province engineering research Center of Flexible and Intelligent Materials School of Chemistry and Chemical EngineeringHefei University of TechnologyHefei 230009China Chemical Design and research institute Co. LTD of Qinghai ProvinceQinghai Engineering and Technology Research Center of Fine ChemicalXining 810008China

A novel integrated film of sulfonated polysulfone/graphene/potassium copper ferricyanide(KCuFC/SPSG)was used for selectively extracting rubidium ion(Rb^(+))from *** form KCuFC/SPSG,the precursor film of sulfonated polysulfone/graphene(SPSG)was synthesized by phase conversion process,which was alternately immersed in 0.1 mol·L^(-1)CuSO_(4)/K_(4)[Fe(CN)_(6)]by in-situ adsorption coupled co-precipitation *** data such as nuclear magnetic resonance spectrometer,Fourier transform infrared spectroscope,X-ray photoelectron spectroscope,X-ray diffraction,scanning electron microscope,and energy dispersive spectroscopy all verified that abundant KCuFC were uniformly located on the *** resulting KCuFC/SPSG was used in film separation *** the solution was fed into the system,the Rb^(+)could be selectively adsorption by KCuFC/*** the saturation adsorption,0.5 mol·L^(-1)NH_(4)Cl/HCl was fed into the film cell,Rb^(+)could be quickly desorbed by ion-exchange between Rb^(+)and NH_(4)^(+)in the lattice of *** purpose of separating and recovering Rb^(+)from the brine can be achieved after the repeated *** effects of pH,adsorption time,and interferential ions on the adsorption capacity of Rb^(+)were investigated by batch *** adsorption behavior fits the pseudo-second order kinetic process,while KCuFC has a higher adsorption capacity(Langmuir maximum sorption 165.4 mg·g^(-1)).In addition,KCuFC/SPSG shows excellent selectivity for Rb^(+)even in complex brine ***/SPSG could maintain 93.5%extraction efficiency after five adsorption/desorption cycles.

关键词： Rubidium extraction Potassium copper ferricyanide Sulfonated polysulfone Graphene oxide Adsorption

On-demand engineerable visible spectrum by fine control of electrochemical reactions

在线全文

学校读者我要写书评

暂无评论

National Science Review 2024年第3期11卷 239-249页

作者： Qirong Liu Lei Liu Yongping Zheng Min Li Baofu Ding Xungang Diao Hui-Ming Cheng Yongbing Tang Advanced Energy Storage technology research Center Shenzhen Institute of Advanced TechnologyChinese Academy of Sciences institute of technology for Carbon Neutrality Shenzhen Institute of Advanced Technology Chinese Academy of Sciences School of Energy and Power engineering North University of China School of Resource Environment and Safety EngineeringHunan University of Science and Technology School of Energy and Power engineering Beihang University Shenzhen Key Laboratory of Energy Materials for Carbon Neutrality Shenzhen Institute of Advanced Technology Chinese Academy of Sciences Shenyang National Laboratory for Materials Science Institute of Metal Research Chinese Academy of Sciences

Tunability of optical performance is one of the key technologies for adaptive optoelectronic applications,such as camouflage clothing, displays, and infrared shielding. High-precision spectral tunability is of great importance for some special applications with on-demand adaptability but remains challenging. Here we demonstrate a galvanostatic control strategy to achieve this goal, relying on the finding of the quantitative correlation between optical properties and electrochemical reactions within materials. An electrochromic electro-optical efficiency index is established to optically fingerprint and precisely identify electrochemical redox reactions in the electrochromic device. Consequently, the charge-transfer process during galvanostatic electrochemical reaction can be quantitatively regulated, permitting precise control over the final optical performance and on-demand adaptability of electrochromic devices as evidenced by an ultralow deviation of research in a wide range of spectroelectrochemistry, electrochemical energy storage, electrocatalysis, and material chemistry.

关键词： electrochromics fine control spectral tunability high precision galvanostatic control

Correlation between hydration properties and electrochemical performances on Ln cation size effect in layered perovskite for protonic ceramic fuel cells

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第1期88卷 1-9,I0001页

作者： Inhyeok Cho Jiwon Yun Boseok Seong Junseok Kim Sun Hee Choi Ho-Il Ji Sihyuk Choi Department of Mechanical engineering Kumoh National Institute of TechnologyGumi 39177GyeongbukRepublic of Korea Department of Aeronautics Mechanical and Electronic Convergence EngineeringKumoh National Institute of TechnologyGumi 39177GyeongbukRepublic of Korea Center for Energy Materials research Korea Institute of Science and Technology(KIST)Seoul 02792Republic of Korea Center for Hydrogen and Fuel Cell research Clean Technology Research DivisionKorea Institute of Science and Technology(KIST)Seoul 02792Republic of Korea Department of Energy and Environmental engineering University of Science and TechnologySeoul 02792Republic of Korea Nanomaterials Science and engineering Korea University of Science and Technology(UST)KIST CampusSeoul 02792Republic of Korea

PrBa_(0.5)Sr_(0.5)Co_(1.5)Fe_(0.5)O_(5+δ)(PrBSCF) has attracted much research interest as a potential triple ionic and electronic conductor(TIEC) electrode for protonic ceramic fuel cells(PCFCs). The chemical formula for Pr BSCF is AA'B_(2)O_(5+δ), with Pr(A-site) and Ba/Sr(A'-site) alternately stacked along the c-axis. Due to these structural features, the bulk oxygen ion diffusivity is significantly enhanced through the disorder-free channels in the PrO layer;thus, the A site cations(lanthanide ions) play a pivotal role in determining the overall electrochemical properties of layered perovskites. Consequently, previous research has predominantly focused on the electrical properties and oxygen bulk/surface kinetics of Ln cation effects,whereas the hydration properties for PCFC systems remain unidentified. Here, we thoroughly examined the proton uptake behavior and thermodynamic parameters for the hydration reaction to conclusively determine the changes in the electrochemical performances depending on LnBa_(0.5)Sr_(0.5)Co_(1.5)Fe_(0.5)O_(5+δ)(LnBSCF,Ln=Pr, Nd, and Gd) cathodes. At 500 ℃, the quantitative proton concentration of PrBSCF was 2.04 mol% and progressively decreased as the Ln cation size decreased. Similarly, the Gibbs free energy indicated that less energy was required for the formation of protonic defects in the order of Pr BSCF < Nd BSCF < Gd BSCF. To elucidate the close relationship between hydration properties and electrochemical performances in LnBSCF cathodes, PCFC single cell measurements and analysis of the distribution of relaxation time were further investigated.

关键词： Protonic ceramic fuel cell Cathode Triple ionic and electronic conductor Hydration property Proton uptake Gibbs free energy

Fault diagnosis of HVAC system with imbalanced data using multi-scale convolution composite neural network

在线全文

学校读者我要写书评

暂无评论

Building Simulation 2024年第3期17卷 371-386页

作者： Rouhui Wu Yizhu Ren Mengying Tan Lei Nie School of Mechanical engineering Hubei University of TechnologyWuhan430068China Industrial research institute of Xiangyang Hubei University of technology Xiangyang441100China

Accurate fault diagnosis of heating,ventilation,and air conditioning(HVAC)systems is of significant importance for maintaining normal operation,reducing energy consumption,and minimizing maintenance ***,in practical applications,it is challenging to obtain sufficient fault data for HVAC systems,leading to imbalanced data,where the number of fault samples is much smaller than that of normal ***,most existing HVAC system fault diagnosis methods heavily rely on balanced training sets to achieve high fault diagnosis ***,to address this issue,a composite neural network fault diagnosis model is proposed,which combines SMOTETomek,multi-scale one-dimensional convolutional neural networks(M1DCNN),and support vector machine(SVM).This method first utilizes SMOTETomek to augment the minority class samples in the imbalanced dataset,achieving a balanced number of faulty and normal ***,it employs the M1DCNN model to extract feature information from the augmented ***,it replaces the original Softmax classifier with an SVM classifier for classification,thus enhancing the fault diagnosis *** the SMOTETomek-M1DCNN-SVM method,we conducted fault diagnosis validation on both the ASHRAE RP-1043 dataset and experimental dataset with an imbalance ratio of 1:*** results demonstrate the superiority of this approach,providing a novel and promising solution for intelligent building management,with accuracy and F1 scores of 98.45%and 100%for the RP-1043 dataset and experimental dataset,respectively.

关键词： fault diagnosis chiller imbalanced data SMOTETomek multi-scale neural networks

Structure and dynamical properties during solidification of liquid aluminum induced by cooling and compression

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Physics B 2024年第7期33卷 476-481页

作者：吴旻杨永琪王垚 College of Materials Science and engineering Zhejiang University of TechnologyHangzhou 310014China Shaoxing research institute Zhejiang University of TechnologyShaoxing 312000China

The structural transformation from a liquid into a crystalline solid is an important subject in condensed matter physics and materials science. In the present study, first-principles molecular dynamics calculations are performed to investigate the structure and properties of aluminum during the solidification which is induced by cooling and compression. In the cooling process and compression process, it is found that the icosahedral short-range order is initially enhanced and then begin to decay, the face-centered cubic short-range order eventually becomes dominant before it transforms into a crystalline solid.

关键词： first-principles method molecular dynamics short-range order liquid aluminum