检索结果-南通市图书馆

Continuous flow pyrolysis of virgin and waste polyolefins:a comparative study,process optimization and product characterization

引用

Frontiers of Chemical Science and engineering 2024年第6期18卷 133-149页

作者： Ecrin Ekici Güray Yildiz Magdalena Joka Yildiz Monika Kalinowska ErolŞeker Jiawei Wang Karlsruhe institute of Technology Institute of Catalysis Research and TechnologyEggenstein-Leopoldshafen 76344Germany Izmir institute of Technology Faculty of EngineeringDepartment of Energy Systems EngineeringIzmir 35430Türkiye Department of Materials engineering and Production Faculty of Mechanical EngineeringBialystok University of TechnologyBialystok 15-351Poland Department of Agricultural and Food engineering and Environmental Development Institute of Civil Engineering and EnergeticsFaculty of Civil Engineering and Environmental SciencesBialystok University of Technology15-351 BialystokPoland Department of Chemistry Biology and BiotechnologyInstitute of Civil Engineering and EnergeticsFaculty of Civil Engineering and Environmental SciencesBialystok University of TechnologyBialystok 15-351Poland Izmir institute of Technology Faculty of EngineeringDepartment of Chemical EngineeringIzmir 35430Türkiye Energy and Bioproducts research institute(EBRI) Aston UniversityBirmingham B47ETUnited Kingdom

Under optimal process conditions,pyrolysis of polyolefins can yield ca.90 wt%of liquid product,i.e.,combination of light oil fraction and heavier *** this work,the experimental findings reported in a selected group of publications concerning the non-catalytic pyrolysis of polyolefins were collected,reviewed,and compared with the ones obtained in a continuously operated bench-scale pyrolysis *** process parameters were used for the pyrolysis of waste and virgin counterparts of high-density polyethylene,low-density polyethylene,polypropylene and a defined mixture of those(i.e.,25:25:50 wt%,respectively).To mitigate temperature drops and enhance heat transfer,an increased feed intake is employed to create a hot melt plastic *** 1.5 g·min^(-1) feed intake,1.1 L·min^(-1) nitrogen flow rate,and a moderate pyrolysis temperature of 450℃,the formation of light hydrocarbons was favored,while wax formation was limited for polypropylene-rich *** of virgin plastics yielded more liquid(maximum 73.3 wt%)than that of waste plastics(maximum 66 wt%).Blending polyethylenes with polypropylene favored the production of liquids and increased the formation of gasoline-range *** products were mainly composed of C3 hydrocarbons,and no hydrogen production was detected due to moderate pyrolysis temperature.

关键词： waste plastics polyolefins chemical recycling pyrolysis alternative fuels waste-to-energy

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Study of inter-well interference in shale gas reservoirs by a robust production data analysis method based on deconvolution

引用

Petroleum Science 2024年第4期21卷 2502-2519页

作者： Wen-Chao Liu Cheng-Cheng Qiao Ping Wang Wen-Song Huang Xiang-Wen Kong Yu-Ping Sun He-Dong Sun Yue-Peng Jia School of civil and Resource engineering University of Science and Technology Beijing PetroChina research institute of Petroleum Exploration and Development

In order to overcome the defects that the analysis of multi-well typical curves of shale gas reservoirs is rarely applied to engineering, this study proposes a robust production data analysis method based on deconvolution, which is used for multi-well inter-well interference research. In this study, a multi-well conceptual trilinear seepage model for multi-stage fractured horizontal wells was established, and its Laplace solutions under two different outer boundary conditions were obtained. Then, an improved pressure deconvolution algorithm was used to normalize the scattered production data. Furthermore, the typical curve fitting was carried out using the production data and the seepage model solution. Finally,some reservoir parameters and fracturing parameters were interpreted, and the intensity of inter-well interference was compared. The effectiveness of the method was verified by analyzing the production dynamic data of six shale gas wells in Duvernay area. The results showed that the fitting effect of typical curves was greatly improved due to the mutual restriction between deconvolution calculation parameter debugging and seepage model parameter debugging. Besides, by using the morphological characteristics of the log-log typical curves and the time corresponding to the intersection point of the log-log typical curves of two models under different outer boundary conditions, the strength of the interference between wells on the same well platform was well judged. This work can provide a reference for the optimization of well spacing and hydraulic fracturing measures for shale gas wells.

关键词： Shale gas Inter-well interference Deconvolution Production data analysis Typical curves Multi-stage fractured horizontal well

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Effect of Y_(2)O_(3) on microstructure and properties of CoCrFeNiTiNb high entropy alloy coating on Ti-6Al-4V surface by laser cladding

引用

Journal of Rare Earths 2024年第3期42卷 586-599,I0006页

作者： Zhen Li Wei Zhao Kedong Yu Ning Guo Guangchun Xiao Zhiming Wang Hui Zhang College of mechanical engineering Qilu University of Technology(Shandong Academy of Sciences)Jinan250353China Shandong institute of mechanical Design and research Jinan250031China

The effects of Y_(2)O_(3) on the microstructure, microhardness, wear resistance, high-temperature oxidation resistance, hot corrosion resistance, and electrochemical corrosion behaviour of CoCrFeNiTiNb high entropy alloy coatings formed on Ti-6Al-4V alloy surfaces were studied. The results show that the addition of Y_(2)O_(3) changes the proportion of the phase but does not change its type. The average grain size is only 1/4.7 of that of the high entropy alloy(HEA) coating, and the fine-grained strengthening leads to increases in the microhardness and wear resistance of 21.8% and 26.9%, respectively. The addition of Y_(2)O_(3) enhances the denseness and bonding properties of the oxide and corrosion product layers, reducing the oxidation and hot corrosion rates by 60.3% and 40.3%, respectively. The addition of Y_(2)O_(3) doubles the corrosion resistance which is attributed to the refinement of the grains, the increased proportion of HCP and TiN, and the weakening of galvanic coupling corrosion.

关键词： Laser cladding High entropy alloy coatings Rare earths Wear properties High temperature properties Electrochemical corrosion

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Development of design charts to predict the dynamic response of pile supported machine foundations

引用

Frontiers of Structural and civil engineering 2024年第4期18卷 663-679页

作者： Deepthi SUDHI Sanjit BISWAS Bappaditya MANNA Department of civil engineering National Institute TechnologyWarangal 506004India Department of civil engineering Indian Institute of TechnologyDelhi 110016India

This paper proposes design charts for estimating imperative input parameters for continuum approach analysis of the nonlinear dynamic response of *** and analytical studies using continuum approach have been conducted on single and 2×2 grouped piles under coupled and vertical modes of vibration,for different dynamic forces and pile *** these design charts are derived from model piles,the charts have been validated for prototype pile foundations using scaling *** experimental responses of model piles are scaled up and these responses exhibit good agreement with analytical *** study also extends to estimation of the errors in computing frequency–amplitude responses with an increase in pile *** is found that,with an increase in pile length,the errors also *** effectiveness of the proposed design charts is also checked with data based on different field setups given in existing literature,and these charts are found to be ***,the developed design charts can be beneficial in estimating the input parameters for continuum approach analysis for determining the nonlinear responses of pile supported machine foundations.

关键词： pile foundation vertical vibration coupled vibration continuum approach soil-pile separation boundary zone parameters

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Synthesis and Thermal Characterization of Solar Salt-Based Phase Change Composites with Graphene Nanoplatelets

引用

Journal of Thermal Science 2024年第2期33卷 491-500页

作者： Pethurajan VIGNESHWARAN Saboor SHAIK Sivan SURESH Müslüm ARICI Asif AFZAL Department of Thermal and Energy engineering School of Mechanical Engineering(SMEC)Vellore Institute of TechnologyVelloreTamil NaduIndia Nanotechnology research Laboratory Department of Mechanical EngineeringNational Institute of TechnologyTiruchirappalliTamil NaduIndia mechanical engineering Department Engineering FacultyKocaeli UniversityUmuttepe CampusKocaeli41001Turkey Department of mechanical engineering P.A.College of Engineering(affiliated to Visvesvaraya Technological UniversityBelagavi)Mangaluru574153India

Thermal energy storage(TES) systems use solar energy despite its irregular availability and day-night temperature *** work reports the thermal characterizations of solar salt-based phase change composites in the presence of graphene nanoplatelets(GNP).Solar salt(60:40 of NaNO_(3):KNO_(3)) possessing phase transition temperature and melting enthalpy of 221.01℃ and 134.58 kJ/kg is proposed as a phase change material(PCM) for high-temperature solar-based energy storage *** conductivity must be improved to make them suitable for widespread applications and to close the gap between the system needs where they are *** is added at weight concentrations of 0.1%,0.3%,and 0.5% with solar salt using the ball milling method to boost its thermal *** studies indicated the formation of a uniform surface of GNP on solar *** spectrum peaks identified the physical interaction between salt and *** characterization of the composites,such as thermal conductivity,DSC and TGA was carried out for the samples earlier and later 300 thermal cycles.0.5% of GNP has improved the thermal conductivity of salt by 129.67% and after thermal cycling,the enhancement reduced to 125.21% indicating that thermal cycling has a minor impact on thermal *** change temperature decreased by around 2.32% in the presence of0.5% GNP and the latent heat reduced by 4.34% after thermal *** thermograms depicted the composites initiated the weight loss at around 550℃ after which it was *** thermal cycling,the weight loss initiated at ~40℃ lower compared to pure salt,which was found to be a minor *** characterization of solar salt and GNP-based solar salt composites revealed that the composites can be used for enhanced heat transfer in high-temperature solar-based heat transfer and energy storage applications.

关键词： thermal energy storage high temperature solar salt graphene nanoplatelets thermal characterization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Reinforcement Learning-Based Energy Management for Hybrid Power Systems:State-of-the-Art Survey,Review,and Perspectives

引用

Chinese Journal of mechanical engineering 2024年第3期37卷 1-25页

作者： Xiaolin Tang Jiaxin Chen Yechen Qin Teng Liu Kai Yang Amir Khajepour Shen Li College of mechanical and Vehicle engineering Chongqing UniversityChongqing 400044China School of mechanical engineering Beijing Institute of TechnologyBeijing 100081China Department of mechanical and Mechatronics engineering University of WaterlooWaterlooON N2L 3G1Canada School of civil engineering Tsinghua UniversityBeijing 100084China

The new energy vehicle plays a crucial role in green transportation,and the energy management strategy of hybrid power systems is essential for ensuring energy-efficient *** paper presents a state-of-the-art survey and review of reinforcement learning-based energy management strategies for hybrid power ***,it envisions the outlook for autonomous intelligent hybrid electric vehicles,with reinforcement learning as the foundational *** of all,to provide a macro view of historical development,the brief history of deep learning,reinforcement learning,and deep reinforcement learning is presented in the form of a ***,the comprehensive survey and review are conducted by collecting papers from mainstream academic *** most of the contributions based on three main directions—algorithm innovation,powertrain innovation,and environment innovation—provides an objective review of the research ***,to advance the application of reinforcement learning in autonomous intelligent hybrid electric vehicles,future research plans positioned as“Alpha HEV”are envisioned,integrating Autopilot and energy-saving control.

关键词： New energy vehicle Hybrid power system Reinforcement learning Energy management strategy

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Seismic control of multi-degrees-of-freedom structures by vertical mass isolation method using MR dampers

引用

Earthquake engineering and engineering Vibration 2024年第2期23卷 503-510页

作者： Mohamad Shahrokh Abdi Masoud Nekooei Mohammad-Ali Jafari Department of civil engineering Marivan BranchIslamic Azad UniversityMarivan ***Iran Department of civil engineering Science and Research BranchIslamic Azad UniversityTehran ***Iran Structural Department of Transmission and Distribution research Center Niroo Research Institute(NRI)Tehran ***Iran

Vertical mass isolation(VMI)is one of the novel methods for the seismic control of *** this method,the entire structure is assumed to consist of two mass and stiffness subsystems,and an isolated layer is located among *** this study,the magnetorheological damper in three modes:passive-off,passive-on,and semi-active mode with variable voltage between zero and 9 volts was used as an isolated layer between two ***-degrees-of-freedom structures with 5,10,and 15 floors in two dimensions were examined under 11 pairs of near field *** each level,the displacement of MR dampers was taken into *** responses of maximum displacement,maximum inter-story drift,and maximum base shear in controlled and uncontrolled buildings were compared to assess the suggested approach for seismic control of the *** to the results,the semi-active control method can reduce the response by more than 12%compared to the uncontrolled mode in terms of maximum displacement of the mass subsystem of the *** method can reduce more than 16%and 20%of the responses compared to the uncontrolled mode in terms of maximum inter-story drift and base shear of the structure,respectively.

关键词： seismic control vertical mass isolation base shear magnetorheological damper semi-active control

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of cooling media on bead geometry,microstructure,and mechanical properties of wire arc additive manufactured IN718 alloy

引用

Advances in Manufacturing 2024年第1期12卷 124-149页

作者： Parveen Kumar Satish Kumar Sharma Ratnesh Kumar Raj Singh Department of mechanical engineering Thapar Institute of Engineering and TechnologyPatialaPunjab147004India

This work aims to present and explore thermal management techniques for the wire arc additive manufacturing(WAAM)of IN718 *** heat can be mitigated via air or water *** this study,the material was deposited under four different heat-input conditions with air or water *** air cooling,the layer is deposited in a normal atmospheric air environment,whereas with water cooling,the material is deposited inside a water tank by varying the water *** validate the air and water cooling thermal management techniques,IN718 single-pass and multilayer linear walls were deposited using the bidirectional gas metal arc welding based WAAM setup under four different heat input *** the deposition of single layers,the temperature profiles were recorded,and the geometric and microstructural features were *** multilayer wall structures,the mechanical properties(hardness,tensile strength,and elongation)were determined and assessed using the corresponding microstructural features explored through scanning electron microscopy(SEM),energy dispersive spectroscopy(EDS),and electron backscatter diffraction(EBSD)*** microstructure observed through SEM analysis in the building direction was found to be nonhomogenous compared with that in the deposition ***,water cooling was found to govern bead characteristics,such as wall width and *** grain size and anisotropy of the mechanical properties also decreased in the water-cooled ***,water cooling is an economical and efficient method to mitigate excessive heat accumulation in WAAM-deposited IN718.

关键词： Air cooling Water cooling IN718 Bead characteristics Microstructure Electron backscatter diffraction(EBSD)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

research on concrete structure defect repair based on three-dimensional printing

引用

Frontiers of Structural and civil engineering 2024年第5期18卷 731-742页

作者： Yang GU Wei LI Xupeng YAO Guangjun LIU School of mechanical engineering Tongji UniversityShanghai 201804China College of civil engineering Tongji UniversityShanghai 200092China Shanghai engineering research Center for Safety Intelligent Control of Building Machinery Shanghai 200032China

Quality assurance and maintenance play a crucial role in engineering construction,as they have a significant impact on project *** common issue in concrete structures is the presence of *** enhance the automation level of concrete defect repairs,this study proposes a computer vision-based robotic system,which is based on three-dimensional(3D)printing technology to repair *** system integrates multiple sensors such as light detection and ranging(LiDAR)and *** is utilized to model concrete pipelines and obtain geometric parameters regarding their ***,a convolutional neural network(CNN)is employed with a depth camera to locate defects in concrete ***,a method for coordinate transformation is presented to convert the obtained coordinates into executable ones for a robotic ***,the feasibility of this concrete defect repair method is validated through simulation and experiments.

关键词： concrete defect detection 3D printing deep learning point cloud data

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Local environment regulation of transition metal dichalcogenide-based single-atom catalysts

引用

Rare Metals 2024年第9期43卷 4019-4037页

作者： Ming-Hui Li Jing Li Xiao-Yu Zheng Yao Zhou Advanced research institute of Multidisciplinary Science andSchool of Chemistry and Chemical engineering Beijing Institute of Technology Laser Micro/Nano Fabrication Laboratory School of Mechanical Engineering Beijing Institute of Technology

Single-atom catalysts have risen significant attention in the realm of green electrocatalytic energy conversion to address energy and environmental sustainability challenges. Transition metal dichalcogenide（TMD）-based single-atom catalysts are considered highly effective in electrocatalysis due to the TMDs' notable specific surface area, tunable elemental species and efficient utilization of single atoms. In order to enhance electrocatalytic performance, it is imperative to elaborately engineer the local environment surrounding the active sites of single atoms within TMDs. In this review, we initially explore the effects of synthesis methods on single-atom active sites and the influence of loading of single atoms on catalytic performance for TMDs. The modulation strategies of the local environment surrounding single-atom sites in TMDs are elaborated, including substitution engineering,surface adsorption, vacancies, spatial confinement and dual-atom site strategies. For each modulation strategy, the effects of diverse local environments on various electrocatalytic applications are presented, such as the oxygen evolution reaction, oxygen reduction reaction, nitrogen reduction reaction, CO2reduction reaction and CO oxidation. Ultimately, this study presents a comprehensive overview of the challenges encountered and the potential directions for the advancement of single-atom catalysts based on TMDs in the realm of electrocatalysis.

关键词： Electrocatalysis

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：