检索结果-南通市图书馆

Journal of Energy Chemistry 2025年第1期100卷 760-769页

作者： Lin Peng Yu Bai Hang Li Meixiu Qu Zhenhua Wang Kening Sun Advanced research institute of Multidisciplinary Science Beijing Institute of Technology Beijing Key Laboratory of Chemical Power Source and Green Catalysis School of Chemistry and Chemical Engineering Beijing Institute of Technology

Lithium-sulfur （Li-S） batteries have gained great attention due to the high theoretical energy density and low cost,yet their further commercialization has been obstructed by the notorious shuttle effect and sluggish redox ***,we supply a strategy to optimize the electron structure of Ni2P by concurrently introducing B-doped atoms and P vacancies in Ni2P （Vp-B-Ni2P）,thereby enhancing the bidirectional sulfur *** study indicates that the simultaneous introduction of B-doped atoms and P vacancies in Ni2P causes the redistribution of electron around Ni atoms,bringing about the upward shift of d-band center of Ni atoms and effective d-p orbital hybridization between Ni atoms and sulfur species,thus strengthening the chemical anchoring for lithium polysulfides （LiPSs） as well as expediting the bidirectional conversion kinetics of sulfur ***,theoretical calculations reveal that the incorporation of B-doped atoms and P vacancies in Ni2P selectively promotes Li2S dissolution and nucleation ***,the Li-S batteries with Vp-B-Ni2P-separators present outstanding rate ability of 777 m A h g-1at 5 C and high areal capacity of 8.03 mA h cm-2under E/S of 5μL mg-1and sulfur loading of 7.20 mg *** work elucidates that introducing heteroatom and vacancy in metal phosphide collaboratively regulates the electron structure to accelerate bidirectional sulfur conversion.

关键词： Lithium sulfur batteries

Effect of Ti Additions on Mechanical and Thermodynamic Properties of W-Ti Alloys: A First-principles Study

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Wuhan University of technology(materials Science) 2025年第1期40卷 246-257页

作者： ZHANG Jian NIE Wei HUANG Jin ZHU Ke LIU Ruxia ZHANG Ruizhi LUO Guoqiang SHEN Qiang State Key Laboratory of Advanced technology for materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China institute for Carbon Neutrality University of Science and Technology BeijingBeijing 100083China

The mechanical and thermodynamic properties of W-Ti alloys(including W_(15)Ti_(1),W_(14)Ti_(2),W_(12)Ti_(4) and W_(8)Ti_(8) alloys)were investigated by the first-principles approach based on density functional *** results indicate that W-Ti alloys except W_(8)Ti_(8) are thermodynamically *** modulus and hardness of W-Ti alloys are smaller than those of pure tungsten and gradually decrease with increasing Ti ***,their B/G ratios and Poisson's ratios exceed those of pure tungsten,suggesting that the introduction of Ti decreases the mechanical strength while enhancing the ductility of W-Ti *** thermal expansion coefficients for W-Ti alloys all surpass those of pure tungsten,indicating that the introduction of titanium exacerbates the thermal expansion behavior of W-Ti ***,elevated pressure has the capacity to suppress the thermal expansion tendencies in titanium-doped tungsten *** study offers theoretical insights for the design of nuclear materials by exploring the mechanical and thermodynamic properties of W-Ti alloys.

关键词： first-principles mechanical properties thermodynamic properties tungsten-titanium alloys

High-dense nanocrystalline W-based alloy prepared by hot isostatic pressing with uniform microstructure, ultrahigh hardness and good thermal stability

在线全文

学校读者我要写书评

暂无评论

Tungsten 2025年第1期7卷 120-136页

作者： Zao-Ming Wu Lin He Lin-Sen Ye Xiao-Feng Yang Jia-Jia Zhang Hong-Bo Lei institute of materials China Academy of Engineering Physics

High-density uniform microstructure nanocrystalline W-10wt.% Cr-5wt.% Y（W-10Cr-5Y） alloy with an average grain size of 85 nm and a relative density of 99.8% was successfully prepared.W-Cr-Y alloys with different amounts of second-phase particles were prepared by high-energy ball milling and hot isostatic pressing *** effects of composition design,ball milling parameters,and sintering parameters on the microstructure of W-Cr-Y alloys were studied.A feasible technology for controlling the synthesis of high-density nanocrystalline W-based alloys has been *** microstructure analysis of nanocrystalline W-10Cr-5Y alloy shows that there are two types of doping in the second phase:intergranular doping and intragranular *** "uniform distribution YOx-rich particles" effectively suppresses the grain growth of W and leads to the formation of nanocrystalline W-10Cr-5Y alloy.W-10Cr-5Y has an ultra-high hardness,with a Vickers hardness of 1312±12 kgf·***-temperature annealing treatment shows that W-10Cr-5Y has good thermal stability at 1000 and1100℃,as demonstrated by the comparison of Vickers hardness and grain size between annealed and unannealed alloys.

关键词： Hot isostatic pressing Microstructure Nanocrystalline tungsten Thermal stability Vickers hardness

Sequence-activated chemiluminescence probes: programmable illumination for high-contrast in vivo sensing and imaging

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Science China Chemistry 2025年第1期68卷 26-34页

作者： Yutao Zhang Juan Li Wei-Hong Zhu Zhiqian Guo Shanghai Key Laboratory of Functional materials Chemistry Joint International Research Laboratory of Precision Chemistry and Molecular Engineering Institute of Fine Chemicals School of Chemistry and Molecular Engineering East China University of Science and Technology State Key Laboratory of Bioreactor Engineering Shanghai Frontier Science Research Base of Optogenetic Techniques for Cell MetabolismEast China University of Science & Technology

Sequence-activated chemiluminescence(CL) technique offers a unique approach to detecting specific biomolecules or cellular events with high sensitivity and spatial resolution. The fundamental principle behind sequence-activated CL probes involves tailoring highly-controllable CL signals in response to specific sequences or events of interest, thus enabling high-contrast signals under complex physiological conditions. This sequential activation could be triggered by enzymes, reactive oxygen species(ROS), biothiols or changes in the microenvironment. These unique sequence-activated CL probes bestow several advantages, including minimal background, deep-tissue penetration, and the ability of non-invasive or minimally invasive detection. The sequence-activated CL techniques represent a significant advancement in molecular imaging and diagnostics. In this mini-review, we focus on the latest developments in sequential CL probes, addressing the technical challenges and discussing the future trajectory by harnessing CL signaling and molecular recognition.

关键词： chemiluminescnece sequence-activation in-vivo bioimaging cyclic peroxide

Multifunctional Nacre‑Like Nanocomposite Papers for Electromagnetic Interference Shielding via Heterocyclic Aramid/MXene Template‑Assisted In‑Situ Polypyrrole Assembly

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第3期17卷 37-54页

作者： Jinhua Xiong Xu Zhao Zonglin Liu He Chen Qian Yan Huanxin Lian Yunxiang Chen Qingyu Peng Xiaodong He National Key Laboratory of Science and technology On Advanced Composites in Special Environments Center for Composite Materials and StructuresHarbin Institute of TechnologyHarbin 150080People’s Republic of China

Robust, ultra-flexible, and multifunctional MXene-basedelectromagnetic interference (EMI) shielding nanocomposite filmsexhibit enormous potential for applications in artificial intelligence,wireless telecommunication, and portable/wearable electronic *** this work, a nacre-inspired multifunctional heterocyclic aramid(HA)/MXene@polypyrrole (PPy) (HMP) nanocomposite paper withlarge-scale, high strength, super toughness, and excellent tolerance tocomplex conditions is fabricated through the strategy of HA/MXenehydrogel template-assisted in-situ assembly of PPy. Benefiting from the"brick-and-mortar" layered structure and the strong hydrogen-bondinginteractions among MXene, HA, and PPy, the paper exhibits remarkable mechanical performances, including high tensile strength (309.7 MPa),outstanding toughness (57.6 MJ m−3), exceptional foldability, and structural stability against ultrasonication. By using the template effect ofHA/MXene to guide the assembly of conductive polymers, the synthesized paper obtains excellent electronic conductivity. More importantly,the highly continuous conductive path enables the nanocomposite paper to achieve a splendid EMI shielding effectiveness (EMI SE) of 54.1 dBat an ultra-thin thickness (25.4 μm) and a high specific EMI SE of 17,204.7 dB cm2g−1. In addition, the papers also have excellent applicationsin electromagnetic protection, electro-/photothermal de-icing, thermal therapy, and fire safety. These findings broaden the ideas for developinghigh-performance and multifunctional MXene-based films with enormous application potential in EMI shielding and thermal management.

关键词： MXene Remarkable mechanical properties Heterocyclic aramid Electromagnetic interference shielding Polypyrrole Multifunctionality

Structure and electrochemical performance of delafossite AgFeO_(2)nanoparticles for supercapacitor electrodes

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and materials 2025年第1期32卷 201-213页

作者： Choulong Veann Thongsuk Sichumsaeng Ornuma Kalawa Narong Chanlek Pinit Kidkhunthod Santi Maensiri School of Physics Institute of ScienceSuranaree University of TechnologyNakhon Ratchasima 30000Thailand SUT Center of Excellence on Advanced Functional materials Suranaree University of TechnologyNakhon Ratchasima 30000Thailand Synchrotron Light research institute Nakhon Ratchasima 30000Thailand Department of Physics Universitas Negeri MalangMalang 65145Indonesia

Delafossite AgFeO_(2)nanoparticles with a mixture of 2H and 3R phases were successfully fabricated by using a simple co-precipitation *** resulting precursor was calcined at temperatures of 100,200,300,400,and 500℃to obtain the delafossite AgFe0_(2)*** morphology and microstructure of the prepared AgFeO_(2)samples were characterized by using field emission scanning electron microscopy(FESEM),transmission electron microscopy(TEM),N_(2) adsorption/desorption,X-ray absorption spectroscopy(XAS),and Xray photoelectron spectroscopy(XPS)techniques.A three-electrode system was employed to investigate the electrochemical properties of the delafossite AgFeO_(2)nanoparticles in a 3 M KOH *** delafossite AgFeO_(2)nanoparticles calcined at 100℃(AFO100)exhibited the highest surface area of 28.02 m^(2)·g^(-1)and outstanding electrochemical performance with specific capacitances of 229.71 F·g^(-1)at a current density of 1 A·g^(-1)and 358.32 F·g^(-1)at a scan rate of 2 mV·s^(-1).This sample also demonstrated the capacitance retention of 82.99% after 1000 charge/discharge cycles,along with superior specific power and specific energy values of 797.46 W·kg^(-1)and 72.74Wh·kg^(-1),*** findings indicate that delafossite AgFeO_(2)has great potential as an electrode material for supercapacitor applications.

关键词： nanoparticles delafossite electrochemical properties X-ray absorption spectroscopy co-precipitation supercapacitor

An SPH Framework for Earthquake-Induced Liquefaction Hazard Assessment of Geotechnical Structures

在线全文

学校读者我要写书评

暂无评论

Computer Modeling in Engineering & Sciences 2025年第1期142卷 251-277页

作者： Sourabh Mhaski G.V.Ramana Department of Civil Engineering Indian Institute of Technology DelhiNew Delhi110016India

Earthquake-induced soil liquefaction poses significant risks to the stability of geotechnical structures *** understanding of the liquefaction triggering,and the post-failure large deformation behaviour is essential for designing resilient *** present study develops a Smoothed Particle Hydrodynamics(SPH)framework for earthquake-induced liquefaction hazard assessment of geotechnical *** coupled flowdeformation behaviour of soils subjected to cyclic loading is described using the PM4Sand model implemented in a three-phase,single-layer SPH framework.A staggered discretisation scheme based on the stress particle SPH approach is adopted to minimise numerical inaccuracies caused by zero-energy modes and tensile ***,non-reflecting boundary conditions for seismic analysis of semi-infinite soil domains using the SPH method are *** numerical framework is employed for the analysis of cyclic direct simple shear test,seismic analysis of a level ground site,and liquefaction-induced failure of the Lower San Fernando *** agreement for liquefaction triggering and post-failure behaviour demonstrates that the SPH framework can be utilised to assess the effect of seismic loading on field-scale geotechnical *** present study also serves as the basis for future advancements of the SPH method for applications related to earthquake geotechnical engineering.

关键词： Earthquake seismic liquefaction stress particle PM4Sand smoothed particle hydrodynamics(SPH)

A surface engineering strategy for the stabilization of zinc metal anodes with montmorillonite layers toward long-life rechargeable aqueous zinc ion batteries

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 94-105页

作者： Wenbo Wang Ruifeng Xu Xu Zhang Peiyu Wang Bao Yang Bingjun Yang Juan Yang Kailimai Su Pengjun Ma Yanan Deng Xianfeng Fan Wanjun Chen Key Laboratory for Electronic materials College of Electrical Engineering Northwest Minzu University Resource Chemistry and Energy materials research Center State Key Laboratory of Solid Lubrication Lanzhou Institute of Chemical Physics Chinese Academy of Sciences University of Chinese Academy of Sciences institute for materials and Processes School of Engineering University of Edinburgh

Rechargeable aqueous zinc-ion batteries （AZIBs） exhibit appreciable potential in the domain of electrochemical energy ***,there are serious challenges for AZIBs,for instance zinc dendrite growth,hydrogen evolution reaction （HER）,and corrosion side ***,we propose a surface engineering modification strategy for coating the montmorillonite （MMT） layer onto the surface of the Zn anode to tackle these issues,thereby achieving high cycling stability for rechargeable *** results reveal that the MMT layer on the surface of the Zn anode is able to provide ordered zincophilic channels for zinc ions migration,facilitating the reaction kinetics of zinc *** functional theory（DFT） calculations and water contact angle （CA） tests prove that MMT@Zn anode exhibits superior adsorption capacity for Zn2+and better hydrophobicity than the bare Zn anode,thereby achieving excellent cycling ***,the MMT@Zn||MMT@Zn symmetric cell holds the stable cycling over 5600 h at 0.5 mA cm-2and 0.125 m A h cm-2,even exceeding 1800 h long cycling under harsh conditions of 5 m A cm-2and 1.25 m A h *** MMT@Zn||V2O5full cell reaches over 3000 cycles at 2 A g-1with excellent rate ***,this surface engineering modification strategy for enhancing the electrochemical performance of AZIBs represents a promising application.

关键词： Hydrogen evolution reaction

Homologous CoS2 interface with directed electron transfer and strong chloridion repulsion for efficient seawater oxidation

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Science China Chemistry 2025年

作者： Yuan Tian Jiang-Bo Chen Jie Ying Ge Tian Yu-Xuan Xiao Yi Lu Si-Ming Wu Wei Geng Ling Shen Xiao-Yu Yang State Key Laboratory of Advanced technology for materials Synthesis and Processing and School of Materials Science and Engineering and Shenzhen Research Institute & Laoshan Laboratory Wuhan University of Technology School of Chemical Engineering and technology Sun Yat-Sen University National Energy Key Laboratory for new Hydrogen-Ammonia Energy Technologies Foshan Xianhu Laboratory

Seawater electrolysis is a highly promising method to produce high energy density hydrogen,especially in dry areas that have scarce freshwater ***,application of seawater electrolysis is confronted by two major problems associated with catalysts employed for the anodic oxygen evolution reaction （OER） including the competitive hypochlorite evolution reaction（HCER） and strong chloridion （Cl–） triggered *** studies aimed at overcoming these problems,a facile method has been developed to synthesize a homologous CoS2heterojunction as an OER *** to a difference in work functions at the interface and increased electron density,this material has directed electron transfer and strong chloridion repulsion properties,*** have shown that CoS2achieves low overpotentials of 289 and 322 mV at 10 mA cm-2current density in respective alkaline （1 M KOH） and alkaline simulated seawater ***,the outstanding stability of CoS2is reflected in a negligible decline in activity during promotion of the OER for 100 *** of density functional theory calculations reveal that the homologous CoS2heterojunction promotes directed electron transport for optimizing adsorption/desorption of reactive species and heightens the Cl-adsorption energy for strongly repulsing Cl-,phenomena that enhance OER performance in alkaline simulated seawater.

关键词：

Direct Photolithography of WO_(x)Nanoparticles for High‑Resolution Non‑Emissive Displays

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第3期17卷 297-309页

作者： Chang Gu Guojian Yang Wenxuan Wang Aiyan Shi Wenjuan Fang Lei Qian Xiaofei Hu Ting Zhang Chaoyu Xiang Yu‑Mo Zhang Laboratory of Optoelectronic Information technology and Devices Ningbo Institute of Materials Technology and EngineeringChinese Academy of SciencesNingbo 315201People’s Republic of China Hangzhou Bay Laboratory of Advanced Nano‑Optoelectronic materials and Devices Qianwan Institute of CNITECHNingbo 315336People’s Republic of China Smart materials for Architecture research Lab Innovation Center of Yangtze River DeltaZhejiang UniversityJiaxing 314100People’s Republic of China University of Science and technology of China Hefei 230026People’s Republic of China State Key Lab of Supramolecular Structure and materials College of ChemistryJilin UniversityChangchun 130012People’s Republic of China

High-resolution non-emissive displays based on electrochromic tungsten oxides(WOx)are crucial for future near-eye virtual/augmented reality interactions,given their impressive attributes such as high environmental stability,ideal outdoor readability,and low energy ***,the limited intrinsic structure of inorganic materials has presented a significant challenge in achieving precise patterning/pixelation at the micron ***,we successfully developed the direct photolithography for WOx nanoparticles based on in situ photo-induced ligand *** strategy enabled us to achieve ultra-high resolution efficiently(line widthmaterials).Additionally,the resulting device exhibited impressive electrochromic performance,such as fast response(3600 cycles),as well as promising applications in electronic logos,pixelated displays,flexible electronics,*** success and advancements presented here are expected to inspire and accelerate research and development(R&D)in high-resolution non-emissive displays and other ultra-fine micro-electronics.

关键词： Electrochromic Direct photolithography WOx nanoparticles In situ photo-induced ligand exchange High-resolution displays