检索结果-南通市图书馆

Journal of Energy Chemistry 2024年第10期97卷 486-497页

作者： Puqiang He Yi Yang Hui Huang Jing Huang Hongbiao Wang Yapeng He Zhongcheng Guo Faculty of metallurgical and Energy Engineering Kunming University of Science and Technology metallurgical Electrode Material Engineering Technology research center of Yunnan Province Kunming Hendera Technology Co.LTD.

The mitigation of sulphation and parasitic hydrogen evolution is considered as prominent research emphasis for the development of lead-carbon batteries（LCBs） in large-scale energy storage ***,cooperative Pb-C composites consisting of single atom Pb and carbon-encapsulated PbO nanoparticles were prepared by freeze-drying technique and pyrolytic reduction to address above *** innovative use of Pb2+to cross-link sodium alginate enabled a uniform distribution of Pb in the composites,generating Pb-C-PbO three-phase *** analysis and theoretical calculations revealed the synergistic interactions between single-atom Pb and PbO nanoparticles in suppressing parasitic hydrogen evolution and promoting the adsorption of Pb *** presence of monatomic Pb and PbO enhanced the affinity of the composites for the negative active materials and facilitated the transformation of the active materials from bulk into spherical shapes to enhance the specific surface area,thereby counteracting *** the coordinated integration of various functionalities offered by Pb@C-x,the cycle life of the battery at HRPSoC reaches 7025 cycles,which is two times for LCB with pure carbon ***,the discharge capacity increased from 3.52 to 3.79 *** study provides substantial insights into the construction of Pb-C composites for LCBs to inhibit negative sulphation and hydrogen evolution.

关键词： Hydrogen evolution Lead carbon composites Lead-carbon battery Negative sulphation Single-atom

Application of electromagnetic metallurgy in continuous casting: A review

在线全文

学校读者我要写书评

暂无评论

Progress in Natural Science:Materials International 2024年第1期34卷 1-11页

作者： Jiale Li Yi Nian Xiang Liu Youcheng Zong Xinyu Tang Chaojie Zhang Liqiang Zhang The Intelligent Metallurgy research Institute School of Metallurgical Engineering Anhui University of Technology

The standards within the global steel industry are constantly advancing, necessitating increasingly rigorous quality control protocols during the continuous casting process. Central to the challenges faced in this domain are persistent defects such as central segregation, V-shaped segregation, and center porosity, which significantly impede the production of high-caliber steel products. The discipline of electromagnetic metallurgy has emerged as a critical solution in reducing these defects, thereby enhancing the efficiency and stability of continuous casting operations. Its demonstrated effectiveness has led to its widespread implementation across global and domestic steel production industries. This paper aims to deliver a comprehensive examination of electromagnetic metallurgy's impact on the final stages of solidification in continuous casting, along with its contributions to the heating and purification processes within the tundish. Additionally, it will explore the potential advancements and applications of this technology in the evolving sphere of continuous casting.

关键词： continuous casting Quality control Final electromagnetic stirring Induction heating Electromagnetic purification

Microstructural evolution and deformation behavior of friction stir welded twin-induced plasticity steel

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第2期169卷 68-81页

作者： Ke Qiao Kuaishe Wang Jia Wang Zhengyang Hao Yating Xiang Peng Han Jun Cai Qi Yang Wen Wang School of metallurgical Engineering National and Local Joint Engineering Research Center for Functional Materials ProcessingXi’an University of Architecture and TechnologyXi’an 710055China Shanghai research Institute of Materials Shanghai 200437China

The weldability of twin-induced plasticity(TWIP)steel with ultra-high strength via friction stir welding(FSW)technique was investigated,and microstructural evolution and deformation behavior of whole and micro-zones of FSW TWIP joint were studied for the first *** results showed that the content of recrystallized grains in the stir zone(SZ)increased from 10.5%of basal material(BM)to 14.2%,and that of heat affected zone(HAZ)increased to 78.6%.The percentage of annealing twins decreased from 26.8%in BM to 11%in SZ,while increased to 35%in *** with the BM,the ultimate tensile strength and yield strength of the FSW joint increased to 1036 and 550 MPa,respectively,reaching 106.7%and 110.9%of BM,*** elongation of the entire joint was 50.5%,which was lower than that of BM due to the nonuniform deformation during the tensile *** engineering strain was mainly concentrated in BM and SZ and transferred to each other during the tensile test,while the engineering strain in HAZ was always the ***,the tensile fracture occurred in the *** order of ultimate tensile strength of micro-zones in the FSW joint was as follows:HAZ>BM≈*** order of yield strength was as follows:HAZ>BM>SZ.

关键词： Twin-induced plasticity steel Friction stir welding Microstructure Mechanical property Deformation behavior

Microstructures and Properties of Honeycomb Sulfur/carbon Black/MoS_(2) Composites

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2024年第5期39卷 1073-1078页

作者： CUI Chunjuan LIU Yue ZHAO Yanan LIU Yanyun WANG Yan WEI Jian HU Ping School of metallurgical Engineering Xi’an University of Architecture and TechnologyXi'an 710055China Shaanxi metallurgical Engineering Technology research center Xi’an 710055China School of Materials Science and Engineering Xi’an University of Architecture and TechnologyXi’an 710055China

Microstructure and property of sulfur/carbon black composites prepared by ball milling were ***/carbon black composites were obtained by melting the mixture of sulfur and carbon black in 155℃and dispersing evenly in carbon black after hydrothermal ***,its conductive properties were ***,microstructure and property of honeycomb sulfur/carbon black/MoS_(2) prepared by hydrothermal method as a cathode material for lithium-sulfur batteries were *** initial discharge specific capacity of the material at 0.2 A/g current density is 838.495 mA·h/g,and the 55.14%after 100 weeks of *** is indicated that MoS_(2) can not only combine with polysulfides through electrostatic action or the action of chemical bonds,but also honeycomb porous ***_(2) can fix polysulfides groups and prevent their ***,the cycling performance of the battery is effectively improved.

关键词： lithium-sulfur battery honeycomb MoS_(2) charge/discharge performance

A compact route for efficient production of high-purity β-Ga2O3 powder

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第9期43卷 4573-4584页

作者： Xiao-Wei Zhou Gao-Jie Chen Liang Xu Zhi-Jun Shao Cheng Yang Yong-Pan Tian Zhuo Zhao School of metallurgical Engineering Anhui University of Technology Low-Carbon research Institute Anhui University of Technology

The present study has proposed a compact process for the production of high-purity β-Ga2O3powder by simply using gallium metal and water as the raw materials. The process basically consists of two essential steps including hydrothermal synthesis of Ga OOH and calcination of Ga OOH for the production of the target product of β-Ga2O3. Thermodynamic evaluation and systematic experiments were conducted for process parameter optimization. X-ray diffractometer（XRD）, scanning electron microscopy（SEM）, thermogravimetryDdifferential scanning calorimetry（TG-DSC） and X-ray photoelectron spectroscopy（XPS） were utilized to clarify the reaction mechanisms of the hydrothermal synthesis and transformation of Ga OOH to β-Ga2O3by calcination. Chemical analysis of the final product of β-Ga2O3obtained under the optimal conditions was carried out with inductively coupled plasma mass spectrometry（ICP-MS）, and the results showed that the contents of the representative impurities such as Ni, Cu, In, Mn, Co, Zn and Cr are obviously lower than the requirement of 5N β-Ga2O3standard, exhibiting excellent application prospect of the proposed process to produce high-purity β-Ga2O3.

关键词： Calcination Hydrothermal synthesis Purity Reaction mechanism β-Ga2O3

ZnO/ZnS heterostructure in N-doped porous carbon for anchoring-diffusion-conversion of polysulfides for high-performance lithium-sulfur batteries

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第8期43卷 3661-3676页

作者： Fei Wang Rong-Wei Huang Wen-Chang Han Chun-Man Yang Wen-Hao Yang Peng Dong Chao-Ling Wu Yi-Yong Zhang Xue Li Ying-Jie Zhang National Local Joint Engineering research center for LithiumIon Batteries and Materials Preparation Technology Key Laboratory of Advanced Batteries Materials of Yunnan ProvinceFaculty of Metallurgical and Energy EngineeringKunming University of Science and TechnologyKunming 650093China Engineering research center of Alternative Energy Materials and Devices Sichuan UniversityMinistry of EducationChengdu 610065China

The shuttle effect of polysulfides is one of the key factors hindering the commercialization of lithiumsulfur batteries(LSBs).Owing to their high conductivity and advantageous structure,heterostructures can be used in sulfur fixation and catalysis of *** this study,a flower-shaped ZnO/ZnS heterostructure on a nitrogendoped porous carbon(NPC) sulfur host was *** ZnO/ZnS heterostructure regulates the electronic structure of the material and exhibits higher metal-like ***,the ZnO/ZnS heterostructure combines the strong adsorption property of ZnO and the high catalytic ability of ZnS to realize the anchoring-diffusionconversion of lithium poly sulfides(LiPSs).Results reveal that the developed ZnO/ZnS@NPC/S cathode has excellent electrochemical performance in LSBs,achieving a high discharge specific capacity of 1365.3 mAh·g^(-1) at 0.1C and excellent rate capability(719 mAh·g^(-1) at 2C;the capacity decay rate is only 0.042% per cycle after 1000 cycles).Even under a high sulfur loading-E/S(electrolyte/sulfur)ratio of 5.1 mg·cm^(-2)-6 μl·mg^(-1),a high specific capacity of 723.7 mAh·g^(-1) is maintained after 60 *** study provides a new strategy for a multifunctional sulfur host that can effectively alleviate the shuttle effect of LiPSs and improve the utilization of sulfur active substances.

关键词： ZnO/ZnS heterostructure Lithium-sulfur batteries Density functional theory Anchor Conversion

MgO-attached graphene nanosheet(MgO@GNS)reinforced magnesium matrix nanocomposite with superior mechanical,corrosion and biological performance

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第9期31卷 2062-2076页

作者： S.Abazari A.Shamsipur H.R.Bakhsheshi-Rad M.S.Soheilirad F.Khorashadizade S.S.Mirhosseini Department of Materials and metallurgical Engineering Amirkabir University of TechnologyTehran ***Iran Iranian National Standards Organization of Hormozgan HormozganIran Advanced Materials research center Department of Materials EngineeringNajafabad BranchIslamic Azad UniversityNajafabadIran Department of Materials and metallurgical Engineering Iran University of Science and TechnologyTehranIran

Magnesium(Mg)alloys are gaining great consideration as body implant materials due to their high biodegradability and ***,they suffer from low corrosion resistance and antibacterial *** this research,semi-powder metallurgy followed by hot extrusion was utilized to produce the magnesium oxide@graphene nanosheets/magnesium(MgO@GNS/Mg)composite to improve mechanical,corrosion and cytocompatibility *** have revealed that the incorporation of MgO@GNS nanohybrids into Mg-based composite enhanced microhardness and compressive *** vitro,osteoblast cell culture tests show that using MgO@GNS nanohybrid fillers enhances osteoblast adhesion and apatite *** presence of MgO@GNS nanoparticles in the composites decreased the opening defects,micro-cracks and micro-pores of the composites thus preventing the penetration of the corrosive solution into the *** demonstrated that the MgO@GNS/Mg composite possesses excellent antibacterial properties because of the combination of the release of MgO and physical damage to bacterium membranes caused by the sharp edges of graphene nanosheets that can effectively damage the cell wall thereby facilitating penetration into the bacterial lipid ***,the MgO@GNS/Mg composite with high mechanical strength,antibacterial activity and corrosion resistance is considered to be a promising material for load-bearing implant applications.

关键词： metal matrix composites MgO@GNS nanohybrid strengthening mechanisms antibacterial activity biocompatibility

Optimizing the sulfur-resistance and activity of perovskite oxygen carrier for chemical looping dry reforming of methane

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第9期96卷 259-271页

作者： Yuelun Li Dong Tian Lei jiang Huicong Zuo LiNan Huang Mingyi Chen Jianchun Zuo Hua Wang Kongzhai Li Engineering research center of metallurgical Energy Conservation and Emission Reduction Ministry of EducationKunming University of Science and TechnologyKunming 650093YunnanChina Faculty of metallurgical and Energy Engineering Kunming University of Science and TechnologyKunming 650093YunnanChina State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization Kunming University of Science and TechnologyKunming 650093YunnanChina

Perovskite oxides has been attracted much attention as high-performance oxygen carriers for chemical looping reforming of methane,but they are easily inactivated by the presence of trace H_(2)***,we propose to modulate both the activity and resistance to sulfur poisoning by dual substitution of Mo and Ni ions with the Fe-sites of LaFeO_(3)*** is found that partial substitution of Ni for Fe substantially improves the activity of LaFeO_(3)perovskite,while Ni particles prefer to grow and react with H_(2)S during the long-term successive redox process,resulting in the deactivation of oxygen *** the presence of Mo in LaNi_(0.05)Fe_(0.95)O_(3−σ)perovskite,H_(2)S preferentially reacts with Mo to generate MoS_(2),and then the CO_(2)oxidation can regenerate Mo via removing *** addition,Mo can inhibit the accumulation and growth of Ni,which helps to improve the redox stability of oxygen *** LaNi_(0.05)Mo_(0.07)Fe_(0.88)O_(3−σ)oxygen carrier exhibits stable and excellent performance,with the CH_(4)conversion higher than 90%during the 50 redox cycles in the presence of 50 ppm H_(2)S at 800℃.This work highlights a synergistic effect in the perovskite oxides induced by dual substitution of different cations for the development of high-performance oxygen carriers with excellent sulfur tolerance.

关键词： Perovskite oxygen carriers Chemical looping reforming Sulfur-resistance Dual substitution Syngas

Screening the optimal Co_(x)/CeO_(2)(110)(x=1–6)catalyst for methane activation in coalbed gas

在线全文

学校读者我要写书评

暂无评论

International Journal of Coal Science & Technology 2024年第3期11卷 256-271页

作者： Li’nan Huang Danyang Li Lei Jiang Zhiqiang Li Dong Tian Kongzhai Li Engineering research center of metallurgical Energy Conservation and Emission Reduction Ministry of EducationKunming University of Science and TechnologyKunming650093China Faculty of metallurgical and Energy Engineering Kunming University of Science and TechnologyKunming650093China State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization Kunming University of Science and TechnologyKunming650093China

The challenges posed by energy and environmental issues have forced mankind to explore and utilize unconventional energy *** is imperative to convert the abundant coalbed gas(CBG)into high value-added products,i.e.,selective and efficient conversion of methane from *** activation,known as the“holy grail”,poses a challenge to the design and development of *** structural complexity of the active metal on the carrier is of particular *** this work,we have studied the nucleation growth of small Co clusters(up to Co_(6))on the surface of CeO_(2)(110)using density functional theory,from which a stable loaded Co/CeO_(2)(110)structure was selected to investigate the methane activation *** the relatively small size of the selected Co clusters,the obtained Co_(x)/CeO_(2)(110)exhibits interesting *** optimized Co_(5)/CeO_(2)(110)structure was selected as the optimal structure to study the activation mechanism of methane due to its competitive electronic structure,adsorption energy and binding *** energy barriers for the stepwise dissociation of methane to form CH3^(*),CH2^(*),CH^(*),and C^(*)radical fragments are 0.44,0.55,0.31,and 1.20 eV,respectively,indicating that CH^(*)dissociative dehydrogenation is the rate-determining step for the system under investigation *** fundamental study of metal-support interactions based on Co growth on the CeO_(2)(110)surface contributes to the understanding of the essence of Co/CeO_(2) catalysts with promising catalytic *** provides theoretical guidance for better designing the optimal Co/CeO_(2) catalyst for tailored catalytic reactions.

关键词： Co cluster growth Ce-based catalysts Methane activation DFT

Preparation of Manganese Oxide and Its Adsorption Properties

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2024年第4期39卷 1031-1040页

作者：贺跃王海峰 YANG Pan WANG Song CHEN Xiaoliang YANG Chunyuan 王家伟 School of Materials and Metallurgy Guizhou UniversityGuiyang 550025China Guizhou Provincial Engineering Technology research center of Manganese Materials for Batteries Tongren Guizhou 554300China Guizhou Provincial Key Laboratory of metallurgical Engineering and Energy Saving Guiyang 550025China

The in-situ oxidation of manganese sulfate solution with H2O_(2),sodium hypochlorite,potassium permanganate and oxygen as oxidants was investigated by means of SEM,EDS,XRD,BET and infrared analysis,and the effects of different oxidants on the morphology,phase composition,surface properties and specific surface area of manganese oxides were *** experimental results show that the diameter of manganese oxide particles prepared with H_(2)O_(2)is the smallest,about 50 nm,and the specific surface area is the largest,63.8764 m^(2)/*** has the advantages of abundant surface hydroxyl groups,no introduction of other impurities and large adsorption *** is most suitable to be used as an oxidant for oxidizing manganese sulfate solution to prepare manganese oxide by in-situ *** manganese oxide prepard by H_(2)O_(2)in-situ oxidation method is used as adsorbent to adsorb cobalt and nickel impurities in manganese *** the reaction pH is 6,the reaction time is 30min and the amount of adsorbent is 1.0 g,the adsorption rates of cobalt and nickel impurities in 100ml manganese sulfate solution are 97.59%and 97.67%,*** residual amounts of cobalt and nickel meet the industrial process standard of first-class products(Co,Ni w/%≤0.005)of high-purity manganese sulfate(Hg/t4823-2015)for *** study plays a guiding role in the preparation and regulation of manganese oxide,and provides a new method with high efficiency,purity and adsorbent availability for the preparation of high-purity manganese sulfate solution.

关键词： manganese oxide in situ oxidation adsorbent regulation mechanism physical chemical properties