检索结果-南通市图书馆

Improving flangeability of multiphase steel by increasing microstructural homogeneity

Journal of Iron and Steel research International 2024年第7期31卷 1736-1745页

作者： Xiao-yu Yang Yong-gang Yang Xing Fang Han-long Zhang Zhen-li Mi Beijing Advanced Innovation Center for Materials Genome Engineering Institute of Engineering TechnologyUniversity of Science and Technology BeijingBeijing 100083China Shanghai baosteel Group Corp.Technology Center Shanghai 201900China

Multiphase microstructure significantly increases the strength,usually at the expense of flangeability because of lacking microstructure *** further improve the strength-flangeability of multiphase steel,the microstructural homogeneity was advanced by adjusting the hard martensite/austenite(M/A)*** strength-flangeability was measured via uniaxial tensile tests and hole expansion *** microstructures were characterized using a scanning electron microscope equipped with an electron backscatter diffraction detector and a transmission electron *** tests were supplementally used to quantitatively reveal the microstructural homogeneity of the *** show that the adjusted multiphase steel achieves an excellent ultimate tensile strength(~800 MPa)and flangeability(~135%hole expansion ratio).A promising homogeneous multiphase microstructure was obtained by controlling undercooled austenite transformed at about 600℃.This microstructure consists of soft polygonal ferrite,blocky bainitic ferrite,and hard M/A *** volume fraction of M/A islands is around 5%,and the average size is less than l *** nanoindentation analysis indicated that the participation of M/A islands impressively influenced the microstructural *** strain partition and better mechanical compatibility were present in the adjusted multiphase steel since the plasticity initiation started late,which resulted in a positive ***,avoiding M/A islands distributed in the chain along the rolling direction on the matrix hindered the possibility of voids coalescing into cracks and stabilized the flanging performance.

关键词： Multiphase steel Flangeability Martensite/austenite island-Microstructural homogeneity-Microstructure Compact strip production process

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effect of cooling method on TiN precipitation behavior of high-titanium high-strength steel during solidification

引用

Journal of Iron and Steel research International 2024年第7期31卷 1692-1703页

作者： Xue-jian Zhang Guang-wei Yang Yong Wan Yong-hong Wen Chuan-sheng Tang Ming-qi Liu Li-jie Tian Key Laboratory of Metallurgical Emission Reduction and Resources Recycling Anhui University of TechnologyMa'anshan 243002AnhuiChina School of Metallurgical Engineering Anhui University of TechnologyMa'anshan 243002AnhuiChina baosteel Central research institute Baoshan Iron and Steel Co.Ltd.Shanghai 201999China

Metallographic microscopy,scanning electron microscopy and TiN growth thermodynamic and kinetic equations were used to investigate the morphology,quantity,and size of TiN in the center of high-titanium high-strength steels under different solidification cooling *** results showed that TiN in the center of the experimental steels mainly existed in three forms:single,composite(Al2O3-TiN),and multi-particle *** began precipitating at around 1497℃(solidification fraction of 0.74).From the end of melting to solidification for 180 s,the cooling rates in the center of the experimental steels for furnace cooling,air cooling,refractory mold cooling,and cast iron mold cooling tended to stabilize at 0.17,0.93,1.65,and 2.15℃/s,*** size of TiN in the center of the experimental steel cooled using furnace cooling was mainly concentrated in the 5-15 pm *** contrast,the size of TiN in the center of the experimental steels cooled using air cooling,refractory mold cooling,and cast iron mold cooling were mainly concentrated in the 1-5 pm *** addition,their density of TiN in the center of the experimental steels is signif-icantly higher than that of the furnace-cooled experimental *** and kinetic precipitation models of TiN established predicted the growth size of TiN in a high-titanium high-strength steel when the solidification cooling rates are not below 0.93℃/s.

关键词： High-titanium steel Cooling method TiN Thermodynamics Kinetics

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Microstructure and Mechanical Property of the Large Cross-Sectioned Mg-Gd-Y-Zn-Zr Alloy Produced by Small Extrusion Ratio

引用

Acta Metallurgica Sinica(English Letters) 2024年第6期37卷 999-1006页

作者： Sen Wang Hucheng Pan Caixia Jiang Zhihao Zeng Zhen Pan Weineng Tang Chubin Yang Yuping Ren Gaowu Qin Key Laboratory for Anisotropy and Texture of Materials(Ministry of Education) College of Materials Science and EngineeringNortheastern UniversityShenyang110819China Mg and Mg Alloy institute Technology CenterBaosteel Metal Co.LtdChina Baowu Steel GroupShanghai200940China Jiangxi Provincial Engineering research Center for Magnesium Alloy Gannan Normal UniversityGanzhou341000China

In this work,the microstructure and mechanical properties of large cross-sectioned Mg-9Gd-3Y-1.2Zn-0.5Zr(VWZ931)samples produced by the small extrusion ratio has been *** as-extruded VWZ931 sample with diameter of~30 mm can exhibit the high yield strength(YS)of 339 MPa,ultimate tensile strength(UTS)of 387 MPa and elongation of 8.2%,*** peak-aged,the YS and UTS of the Mg samples were significantly increased to 435 MPa and 467 *** small extrusion ratio leads to the low fraction of dynamic recrystallized(DRX)grains in VWZ931 sample,and the texture hardening effect can be fully utilized to achieve high *** combined effect of precipitation strengthening due to the long-period stacking ordered phases and theβ′phase,grain boundary strengthening due to the fine DRX grains,heterogeneous deformation-induced strengthening caused by bimodal microstructure,can together contribute to the high strength of present Mg *** findings can shed light on designing other large-sized Mg wrought alloys with high mechanical performance.

关键词： Mg-RE alloy Mechanical property Bimodal grains Texture hardening

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Coke behavior with H_(2)O in a hydrogen-enriched blast furnace:A review

引用

International Journal of Minerals,Metallurgy and Materials 2024年第5期31卷 959-976页

作者： Feng Zhou Daosheng Peng Kejiang Li Alberto N.Conejo Haotian Liao Zixin Xiong Dongtao Li Jianliang Zhang School of Metallurgical and Ecological Engineering University of Science and Technology BeijingBeijing 100083China School of Chemical Engineering The University of QueenslandSt LuciaQLD 4072Australia baosteel Central research institute(R&D Center of Wuhan Iron&Steel Co. Ltd.)Wuhan 430080China Shougang research institute of Technology Shougang Group Corporation Ltd.Beijing 100043China Beijing Key Laboratory of Green Recyclable Process for Iron and Steel Production Technology Beijing 100043China

Hydrogen-enriched blast furnace ironmaking has become an essential route to reduce CO_(2)emissions in the ironmaking ***,hydrogen-enriched reduction produces large amounts of H_(2)O,which places new demands on coke quality in a blast *** a hydrogen-rich blast furnace,the presence of H_(2)O promotes the solution loss *** result improves the reactivity of coke,which is 20%-30%higher in a pure H_(2)O atmosphere than in a pure CO_(2)*** activation energy range is 110-300 kJ/mol between coke and CO_(2)and 80-170 kJ/mol between coke and H_(2)***_(2)and H_(2)O are shown to have different effects on coke degradation *** review provides a comprehensive overview of the effect of H_(2)O on the structure and properties of *** exploring the interactions between H_(2)O and coke,several unresolved issues in the field requiring further research were *** review aims to provide valuable insights into coke behavior in hydrogen-rich environments and promote the further development of hydrogen-rich blast furnace ironmaking processes.

关键词： hydrogen ironmaking coke behavior blast furnace gasification microstructure kinetics

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Two-dimensional materials for tunable and nonlinear metaoptics

引用

Advanced Photonics 2024年第3期6卷 16-34页

作者： Zeng Wang Kandammathe Valiyaveedu Sreekanth Meng Zhao Jinpeng Nong Yincheng Liu Jinghua Teng Agency for Science Technology and Research (A*STAR) Institute of Materials Research and Engineering (IMRE)

Metaoptics formed by ultrathin and planar building blocks enable compact and efficient optical devices that manipulate light at the nanoscale. The development of tunable metaoptics holds the promise of miniaturized and efficient optical systems that can dynamically adapt to changing conditions or requirements,propelling innovations in fields ranging from telecommunication and imaging to quantum computing and sensing. Two-dimensional(2D) materials show strong promise in enabling tunable metaoptics due to their exceptional electronic and optical properties from the quantum confinement within the atomically thin layers. In this review, we discuss the recent advancements and challenges of 2D material-based tunable metaoptics in both linear and nonlinear regimes and provide an outlook for prospects in this rapidly advancing area.

关键词： metaoptics tunable metaoptics two-dimensional optoelectronics nonlinear optics excitons polaritons

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

On the Innovation,Design,Construction,and Experiments of OMEGA-Based SSPS Prototype:The Sun-Chasing Project

引用

Engineering 2024年第5期36卷 90-101页

作者： Baoyan Duan Yiqun Zhang Guangda Chen Ze Zhao Jianwei Mi Xun Li Lin Yang Xi Li research institute on Mechatronics Xidian UniversityXi’an 710071China research institute of Antenna Xidian UniversityXi’an 710071China

This study systematically introduces the development of the world’s first full-link and full-system ground demonstration and verification system for the OMEGA space solar power satellite(SSPS).First,the OMEGA 2.0 innovation design was ***,field-coupling theoretical models of sunlight concentration,photoelectric conversion,and transmitting antennas were established,and a systematic optimization design method was ***,a beam waveform optimization methodology considering both a high beam collection efficiency and a circular stepped beam shape was ***,a control strategy was developed to control the condenser pointing toward the sun while maintaining the transmitting antenna toward the ***,a high-efficiency heat radiator design method based on bionics and topology optimization was ***,a method for improving the rectenna array’s reception,rectification,and direct current(DC)power synthesis efficiencies is ***,high-precision measurement technology for high-accuracy beam-pointing control was ***,a smart mechanical structure was designed and ***,the developed SSPS ground demonstration and verification system has the capacity for sun tracking,a high concentration ratio,photoelectric conversion,microwave conversion and emission,microwave reception,and rectification,and thus satisfactory results were obtained.

关键词： OMEGA-SSPS Full-link and full-system Beam collection efficiency Circular stepped beam shape Smart structure Field coupling theoretical model `Beam pointing control

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Optimal search path planning of UUV in battlefeld ambush scene

引用

Defence Technology（防务技术） 2024年第2期32卷 541-552页

作者： Wei Feng Yan Ma Heng Li Haixiao Liu Xiangyao Meng Mo Zhou Naval research institute Beijing100161China

Aiming at the practical application of Unmanned Underwater Vehicle(UUV)in underwater combat,this paper proposes a battlefield ambush scene with UUV considering ocean ***,by establishing these mathematical models of ocean current environment,target movement,and sonar detection,the probability calculation methods of single UUV searching target and multiple UUV cooperatively searching target are given ***,based on the Hybrid Quantum-behaved Particle Swarm Optimization(HQPSO)algorithm,the path with the highest target search probability is ***,through simulation calculations,the influence of different UUV parameters and target parameters on the target search probability is analyzed,and the minimum number of UUVs that need to be deployed to complete the ambush task is demonstrated,and the optimal search path scheme is *** method proposed in this paper provides a theoretical basis for the practical application of UUV in the future combat.

关键词： Battlefield ambush Optimal search path planning UUV path Planning Probability of cooperative search

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Uncovering the dominant contribution of intermediate volatility compounds in secondary organic aerosol formation from biomass-burning emissions

引用

National Science Review 2024年第3期11卷 150-158页

作者： Kun Li Jun Zhang David M.Bell Tiantian Wang Houssni Lamkaddam Tianqu Cui Lu Qi Mihnea Surdu Dongyu Wang Lin Du Imad El Haddad Jay G.Slowik Andre S.H.Prevot Environment research institute Shandong University Laboratory of Atmospheric Chemistry Paul Scherrer Institute

Organic vapors from biomass burning are a major source of secondary organic aerosols(SOAs). Previous smog chamber studies found that the SOA contributors in biomass-burning emissions are mainly volatile organic compounds(VOCs). While intermediate volatility organic compounds(IVOCs) are efficient SOA precursors and contribute a considerable fraction of biomass-burning emissions, their contribution to SOA formation has not been directly observed. Here, by deploying a newly-developed oxidation flow reactor to study SOA formation from wood burning, we find that IVOCs can contribute ～70% of the formed SOA, i.e.>2 times more than VOCs. This previously missing SOA fraction is interpreted to be due to the high wall losses of semi-volatile oxidation products of IVOCs in smog chambers. The finding in this study reveals that SOA production from biomass burning is much higher than previously thought, and highlights the urgent need for more research on the IVOCs from biomass burning and potentially other emission sources.

关键词： atmospheric chemistry biomass burning secondary organic aerosol intermediate volatility organic compounds

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Two-dimensional MOF-based materials:Preparations and applications as electrodes in Li-ion batteries

引用

Journal of Energy Chemistry 2024年第10期97卷 388-418页

作者： Narges Nobakht Seyyed Ahmad Etghani Mohammad Hosseini Seyed Hamed Aboutalebi Condensed Matter National Laboratory Institute for Research in Fundamental Sciences Batt Scout Company School of Biological Sciences Institute for Research in Fundamental Sciences

Two-dimensional(2D) metal-organic frameworks(MOFs) are rapidly emerging as a unique class of mushrooming family of 2D materials offering distinctive features,such as hierarchical porosity,extensive surface area,easily available active sites,and versatile,adaptable *** promising characteristics have positioned them as highly appealing alternatives for a wide range of applications in energy storage technologies,including lithium ***,the poor conductivity and limited stability of 2D MOFs have limited their real applications in electrochemical energy *** limitations have therefore warranted ongoing research to enhance the performance of 2D *** the significance of 2D MOF-based materials as an emerging class of advanced materials,a multitude of strategy has been devised to address these challenges such as synthesizing 2D conductive MOFs and derivatives along with 2D MOF *** promising approach involves the use of 2D MOF derivatives,including transition metal oxides,which due to their abundant unsatu rated active metal sites and shorter diffusion paths,offer superior electrochemical ***,by combining pristine 2D MOFs with other materials,hybrid 2D MOF materials can be *** hybrids,with their enhanced stability and conductivity,can be directly utilized as active materials in lithium *** the present review,we categorize 2D MOF-based materials into three distinct groups:pristine 2D MOFs,2D MOFderived materials,and 2D MOF hybrid *** synthesis methods for each group,along with their specific applications as electrode materials in lithium-ion batteries,are discussed in *** comprehensive review provides insights into the potential of 2D MOFs while highlighting the opportunities and challenges that are present in this evolving field.

关键词： 2D materials 2D metal-organic frameworks Energy storage Li-ion batteries Synthesis

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Gradient honeycomb metastructure with broadband microwave absorption and effective mechanical resistance

引用

Nano Materials Science 2024年第4期6卷 456-466页

作者： Dongmeng Li Xia Zheng Hao Gu Xiaobo Xuan Bing Liu Hongquan Feng Fuheng Zhang Shanghai Radio Equipment research institute

Multifunctional metastructure integrated broadband microwave absorption and effective mechanical resistance has attracted much attention. However, multifunctional performance is limited by the lack of theoretical approaches to integrated design. Herein, a multi-layer impedance gradient honeycomb(MIGH) was designed through theoretical analysis and simulation calculation, and fabricated using 3D printing technique. A theoretical calculation strategy for impedance gradient structure was established based on the electromagnetic parameter equivalent method and the multi-layer finite iterative method. The impedance of MIGH was analyzed by the theoretical calculation strategy to resolve the broadband absorption. Intrinsic loss mechanism of matrix materials and distributions of electric fields, magnetic fields and power loss were analyzed to investigate the absorption mechanism. Experimental results indicated that a 15 mm thick designed metastructure can achieve the absorption more than 88.9% in the frequency range of 2-18 GHz. Moreover, equivalent mechanical parameters of MIGH was calculated by integral method according to the Y-shaped model. Finite Element analysis of stress distributions were carried out to predict the deformation behavior. Mechanical tests demonstrate that MIGH achieved the compression modulus of 22.89 MPa and flexure modulus of 17.05 MPa. The integration of broadband electromagnetic absorption and effective mechanical resistance was achieved by the proposed design principle and fabrication methodology.

关键词： Multifunctional metastructure Broadband microwave absorption Impedance gradient calculation Mechanical characteristics Finite element analysis

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：