检索结果-南通市图书馆

Removal of rubidium from brine by an integrated film of sulfonated polysulfone/graphene/potassium copper ferricyanide

引用

Chinese Journal of Chemical engineering 2024年第5期69卷 112-121页

作者： Huanxi Xu Peihua Lin Pei-Jun Liu Hai-Gang Liu Hui-Bin Guo Chao-Xiang Wu Ming Fang Xu Zhang Guan-Ping Jin Anhui Province engineering research center of Flexible and Intelligent Materials School of Chemistry and Chemical EngineeringHefei University of TechnologyHefei 230009China Chemical Design and research Institute Co. LTD of Qinghai ProvinceQinghai Engineering and Technology Research Center of Fine ChemicalXining 810008China

A novel integrated film of sulfonated polysulfone/graphene/potassium copper ferricyanide(KCuFC/SPSG)was used for selectively extracting rubidium ion(Rb^(+))from *** form KCuFC/SPSG,the precursor film of sulfonated polysulfone/graphene(SPSG)was synthesized by phase conversion process,which was alternately immersed in 0.1 mol·L^(-1)CuSO_(4)/K_(4)[Fe(CN)_(6)]by in-situ adsorption coupled co-precipitation *** data such as nuclear magnetic resonance spectrometer,Fourier transform infrared spectroscope,X-ray photoelectron spectroscope,X-ray diffraction,scanning electron microscope,and energy dispersive spectroscopy all verified that abundant KCuFC were uniformly located on the *** resulting KCuFC/SPSG was used in film separation *** the solution was fed into the system,the Rb^(+)could be selectively adsorption by KCuFC/*** the saturation adsorption,0.5 mol·L^(-1)NH_(4)Cl/HCl was fed into the film cell,Rb^(+)could be quickly desorbed by ion-exchange between Rb^(+)and NH_(4)^(+)in the lattice of *** purpose of separating and recovering Rb^(+)from the brine can be achieved after the repeated *** effects of pH,adsorption time,and interferential ions on the adsorption capacity of Rb^(+)were investigated by batch *** adsorption behavior fits the pseudo-second order kinetic process,while KCuFC has a higher adsorption capacity(Langmuir maximum sorption 165.4 mg·g^(-1)).In addition,KCuFC/SPSG shows excellent selectivity for Rb^(+)even in complex brine ***/SPSG could maintain 93.5%extraction efficiency after five adsorption/desorption cycles.

关键词： Rubidium extraction Potassium copper ferricyanide Sulfonated polysulfone Graphene oxide Adsorption

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

High-temperature Stability of Mg-1Al-12Y Alloy Containing LPSO Phase and Mechanism of Its Portevin-Le Chatelier(PLC)Effect

引用

Acta Metallurgica Sinica(English Letters) 2024年第6期37卷 982-998页

作者： Qian-Long Ren Shuai Yuan Shi-Yu Luan Jin-Hui Wang Xiao-Wei Li Xiao-Yu Liu qinghai Provincial Key Laboratory of New Light Alloys Qinghai Provincial Engineering Research Center of High Performance Light Metal Alloys and FormingQinghai UniversityXining810016China School of Materials Science and engineering Shenyang University of TechnologyShenyang110870China

In this study,the high-temperature stability and the generation mechanism of the Portevin-Le Chatelier(PLC)effect in solid-solution Mg-1Al-12Y alloy with different heat treatment processes were investigated by adjusting the content of long-period stacking ordered(LPSO)*** was found that the content of LPSO phases in the alloys differed the most after heat treatment at 530℃for 16 h and 24 h,with values of 13.56%and 3.93%***,high-temperature tensile experiments were conducted on these two alloys at temperatures of 150℃,200℃,250℃,and 300℃.The results showed that both alloys exhibited the PLC effect at temperatures ranging from 150 to 250℃.However,at a temperature 300℃,only the alloy with a greater concentration of LPSO phases exhibited the PLC effect,whereas the alloy with a lower proportion of LPSO phases did not exhibit this ***,both alloys exhibited remarkable high-temperature stability,with the alloy containing a greater percentage of LPSO phases also demonstrating superior *** underlying mechanism for this phenomenon lies in the exceptional high-temperature stability exhibited by the second phase within the ***,the LPSO phase effectively obstructs the movement of dislocations,and it also undergoing kinking to facilitate plastic deformation of the *** results indicate that the PLC effect can be suppressed by reducing dislocation pile-up at grain boundaries,which leads to a decrease in alloy plasticity but an increase in *** presence of the PLC effect in the WA121 alloy is attributed to the abundant dispersed second phase within the alloy,which initially hinders the movement of dislocations,leading to an increase in stress,and subsequently releases the dislocations,allowing them to continue their movement and thereby reducing in stress.

关键词： Magnesium alloy Long-period stacking ordered(LPSO)phase Portevin-Le Chatelier effect High temperature

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Progress and challenges for replacing n-methyl-2-pyrrolidone/polyvinylidene fluoride slurry formulations in lithium-ion battery cathodes

引用

Progress in Natural Science:Materials International 2024年第01期34卷 194-206页

作者： Sung Cik Mun Yeong Hoon Jeon Jong Ho Won battery Materials research center LG Chem Department of Energy engineering Dankook University

With electric vehicles, energy storage systems, and portable electronic devices becoming increasingly popular, the demand for lithium-ion batteries has surged considerably. In the lithium-ion battery industry, n-methyl-2-pyrrolidone(NMP) is widely used as the solvent for cathode slurry, and polyvinylidene fluoride(PVDF) is used as the cathode binder. However, because of the harmful effect of NMP on the environment and human health, the use of NMP and PVDF for lithium-ion batteries will be highly regulated in the future. Therefore, developing eco-friendly alternatives is crucial for formulating systems using new solvents and binders. Despite numerous efforts, these alternatives have not been widely adopted across the lithium-ion battery industry. It is due to their limited ability to compete on price or performance to replace the traditional NMP/PVDF slurry formulations. This review investigates developments in the search for new solvents and binders that can be used in cathode slurry compositions. The new systems can potentially decrease energy consumption and manufacturing costs associated with NMP recovery, energy-intensive drying processes, and material expenses. We discuss key factors and technical challenges from earlier studies and compare them with the current, optimized formulations based on NMP and PVDF.

关键词： lithium-ion battery Eco-friendly alternative Slurry formulation Chemical regulation Binder performance

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Enhancing layered perovskite ferrites with ultra-high-density nanoparticles via cobalt doping for ceramic fuel cell anode

引用

Journal of Energy Chemistry 2024年第9期96卷 39-48页

作者： Shuo Zhai Rubao Zhao Hailong Liao Ling Fu Senran Hao Junyu Cai Yifan Wu Jian Wang Yunhong Jiang Jie Xiao Tao Liu Heping Xie State Key Laboratory of Intelligent Construction and Healthy Operation and Maintenance of Deep Underground engineering Shenzhen University&Sichuan UniversityShenzhen 518060GuangdongChina National and Local Joint engineering research center for lithium-ion Batteries and Materials Preparation technology Key Laboratory of Advanced Battery Materials of Yunnan ProvinceFaculty of Metallurgical and Energy EngineeringKunming University of Science and TechnologyKunming 650093YunnanChina School of Energy and Environment City University of Hong KongKowloon 999077Hong KongChina

Nanoparticles anchored on the perovskite surface have gained considerable attention for their wide-ranging applications in heterogeneous catalysis and energy conversion due to their robust and integrated structural ***,we employ controlled Co doping to effectively enhance the nanoparticle exsolution process in layered perovskite ferrites *** alloy nanoparticles with ultra-high-density are exsolved on the(PrBa)_(0.95)(Fe_(0.8)Co_(0.1)Nb_(0.1))2O_(5+δ)(PBFCN_(0.1))surface under reducing atmosphere,providing significant amounts of reaction sites and good durability for hydrocarbon *** a reducing atmosphere,cobalt facilitates the reduction of iron cations within PBFCN_(0.1),leading to the formation of CoFe alloy *** formation is accompanied by a cation exchange process,wherein,with the increase in temperature,partial cobalt ions are substituted by ***,Co doping significantly enhance the electrical conductivity due to the stronger covalency of the Cosingle bondO bond compared with Fesingle bondO bond.A single cell with the configuration of PBFCN_(0.1)-Sm_(0.2)Ce_(0.8)O_(1.9)(SDC)|SDC|Ba_(0.5)Sr_(0.5)Co_(0.8)Fe_(0.2)O_(3−δ)(BSCF)-SDC achieves an extremely low polarization resistance of 0.0163Ωcm^(2)and a high peak power density of 740 mW cm^(−2)at 800℃.The cell also shows stable operation for 120 h in H_(2)with a constant current density of 285 mA cm^(−2).Furthermore,employing wet C_(2)H_(6)as fuel,the cell demonstrates remarkable performance,achieving peak power densities of 455 mW cm^(−2)at 800℃and 320 mW cm^(−2)at 750℃,marking improvements of 36%and 70%over the cell with(PrBa)_(0.95)(Fe_(0.9)Nb_(0.1))_(2)O_(5+δ)(PBFN)-SDC at these respective *** discovery emphasizes how temperature influences alloy nanoparticles exsolution within doped layered perovskite ferrites materials,paving the way for the development of high-performance ceramic fuel cell anodes.

关键词： Solid oxide fuel cell Anode Ethane fuel Nanoparticle Exsolution Layered perovskite Ferrites

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Hot Deformation Behavior and Microstructures Evolution of GNP-Reinforced Fine-Grained Mg Composites

引用

Acta Metallurgica Sinica(English Letters) 2024年第3期37卷 407-424页

作者： Hengrui Hu Jiayu Qin Yunpeng Zhu Jinhui Wang Xiaoqiang Li Peipeng Jin qinghai Provincial Key Laboratory of New Light Alloys Qinghai UniversityXining 810016China qinghai Provincial engineering research center of High Performance Light Metal Alloys and Forming Qinghai UniversityXining 810016China Department of Mechanical engineering Tsinghua UniversityBeijing 100084China School of Material Science and engineering Lanzhou University of TechnologyLanzhou 730050China

Graphene nanoplates(GNPs)-reinforced magnesium matrix composites have been attracted great ***,knowledge is lack for the hot deformation behavior of GNP-reinforced magnesium(GNPs/Mg)*** this study,the fine-grained GNPs/Mg composite was fabricated by powder metallurgy process followed by *** hot deformation behavior,microstructure evolution and dynamic recrystallization(DRX)mechanism of fine-grained GNPs/Mg composite were investigated by hot compression test and electron back-scatter diffraction(EBSD).The hot compression tests of the composite were conducted at temperatures between 423 and 573 K with the strain rates from 0.001 to 1 s^(-1).The strain compensated power law equation was established to describe the hot deformation behavior of the *** stress exponent and activation energy of the composite are 7.76 and 83.23 kJ/mol,respectively,suggesting that the deformation mechanism is grain boundary slip controlled dislocation climb *** abnormally high stress exponent and activation energy are unattainable in the composite due to the fine grain size of the composites and the absence of Zener pinning and Orowan effects of GNPs *** grain size increases with the decrease in Zener-Hollomn(Z)parameter,which can be well fitted by power-law *** the increase in grain size and decrease in Z parameter,the geometrically necessary dislocation density decreases,which shows the approximately power-law relationship.A random and weak texture was formed after hot *** discontinuous dynamic recrystallization and continuous dynamic recrystallization mechanism dominated the DRX behavior at 473 K/0.001 s^(-1) and 573 K/0.001 s^(-1),respectively.

关键词： GNPs Mg composite Hot deformation behavior Constitutive equations Microstructure evolution Dynamic recrystallization

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Residual alkali-evoked cross-linked polymer layer for anti-air-sensitivity LiNi_(0.89)Co_(0.06)Mn_(0.05)O_(2)cathode

引用

Journal of Energy Chemistry 2024年第5期92卷 450-458页

作者： Chao Zhao Xuebao Li Yun Zhao Jingjing He Yuanpeng Cao Wei Luo Ding Wang Jianguo Duan Xianshu Wang Baohua Li National and Local Joint engineering research center of lithium-ion Batteries and Materials Preparation technology Key Laboratory of Advanced Battery Materials of Yunnan ProvinceFaculty of Metallurgical and Energy EngineeringKunming University of Science and TechnologyKunming 650093YunnanChina School of Materials Science and engineering Central South UniversityChangsha 410083HunanChina Institute of Materials research Tsinghua Shenzhen International Graduate SchoolTsinghua UniversityShenzhen 518055Guangdong China City College Kunming University of Science and TechnologyKunming 650051YunnanChina

High-energy density lithium-ion batteries(LIBs)with layered high-nickel oxide cathodes(LiNi_(x)Co_(y)Mn_(1-x-y)O_(2),x≥0.8)show great promise in consumer electronics and vehicular ***,LiNi_(x)Co_(y)Mn_(1-x-y)O_(2)faces challenges related to capacity decay caused by residual alkalis owing to high sensitivity to *** address this issue,we propose a hazardous substances upcycling method that fundamentally mitigates alkali content and concurrently induces the emergence of an anti-air-sensitive layer on the cathode *** the neutralization of polyacrylic acid(PAA)with residual alkalis and then coupling it with 3-aminopropyl triethoxysilane(KH550),a stable and ion-conductive cross-linked polymer layer is in situ integrated into the LiNi_(0.89)Co_(0.06)Mn_(0.05)O_(2)(NCM)*** characterization and measurements demonstrate its *** NCM material exhibits impressive cycling performance,retaining 88.4%of its capacity after 200 cycles at 5 C and achieving an extraordinary specific capacity of 170.0 mA h g^(-1) at 10 ***,this layer on the NCM efficiently suppresses unfavorable phase transitions,severe electrolyte degradation,and CO_(2)gas evolution,while maintaining commendable resistance to air *** surface modification strategy shows widespread potential for creating air-stable LiNi_(x)Co_(y)Mn_(1-x-y)O_(2)cathodes,thereby advancing high-performance LIBs.

关键词： lithium-ion batteries Nickel-rich layered cathode Residual alkalis Cross-linked polyme rmodification Airsensitivity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

MOF and its derivative materials modified lithium-sulfur battery separator:a new means to improve performance

引用

Rare Metals 2024年第6期43卷 2418-2443页

作者： Rong-Wei Huang Yong-Qi Wang Dan You Wen-Hao Yang Bin-Nan Deng Fei Wang Yue-Jin Zeng Yi-Yong Zhang Xue Li National Local Joint engineering research center for lithium-ion Batteries and Materials Preparation technology Key Laboratory of Advanced Batteries Materials of Yunnan ProvinceFaculty of Metallurgical and Energy EngineeringKunming University of Science and TechnologyKunming 650093China State Key Laboratory of Physical Chemistry of Solid Surfaces Collaborative Innovation Centre of Chemistry for Energy MaterialsState-Province Joint Engineering Laboratory of Power Source Technology for New Energy VehicleEngineering Research Center of Electrochemical TechnologyMinistry of EducationCollege of Chemistry and Chemical EngineeringXiamen UniversityXiamen 361005China

In recent years,lithium-sulfur batteries(LSBs)are considered as one of the most promising new generation energies with the advantages of high theoretical speeific capacity of sulfur(1675 mAh·g^(-1)),abundant sulfur resources,and environmental friendliness storage technologies,and they are receiving wide attention from the ***,the problems of the shuttle effect and lithium dendrite growth in LSBs have limited their practical application,so there is a need to find ways to solve these *** is an excellent choice to use novel materials to modify battery *** those novel materials,the metal-organic framework(MOF)has the properties of regular pores and controllable *** applied as a positive electrode and diaphragm,it can restrain the shuttle effect and lithium dendrite growth,especially since it shows excellent performance in diaphragm ***,various design strategies and synthesis methods of MOF-modified separators are reviewed in this paper,and the applications of MOF in LSBs separators in different forms are introduced,including the composite of MOF and carbon-based materials,the compounding of MOF and polymer,self-carbonization to form MOF-derived *** the same time,different characterization techniques are systematically reviewed to obtain the physical and chemical properties of MOF particles and the working mechanism of MOF-modified diaphragm,which provides a basis for further research in this ***,some future research trends and directions are put forward to fully tap the future commercial potential of MOF-modified diaphragm in LSBs.

关键词： MOF lithium-sulfur battery Modified diaphragms Design strategies Prospect Characterization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Boosting the performance of LiNi_(0.90)Co_(0.06)Mn_(0.04)O_(2) electrode by uniform Li_(3)PO_(4) coating via atomic layer deposition

引用

Chinese Chemical Letters 2024年第5期35卷 499-503页

作者： Mingjiao Lu Zhixing Wang Gui Luo Huajun Guo Xinhai Li Guochun Yan Qihou Li Xianglin Li Ding Wang Jiexi Wang School of Metallurgy and Environment Central South UniversityChangsha 410083China BASF ShanShan battery Materials Co. Ltd.Changsha 410006China engineering research center of the Ministry of Education for Advanced battery Materials Central South UniversityChangsha 410083China Hunan Provincial Key Laboratory of Nonferrous Value-Added Metallurgy Central South UniversityChangsha 410083China School of Physics and Chemistry Hunan First Normal UniversityChangsha 410205China National and Local Joint engineering Laboratory for lithium-ion Batteries and Materials Preparation technology Key Laboratory of Advanced Battery Materials of Yunnan ProvinceFaculty of Metallurgical and Energy EngineeringKunming University of Science and TechnologyKunming 650093China

Ultra-high nickel material is considered to be a promising cathode ***,with the increase of nickel content,the interfacial side reactions between the cathode and electrolyte become increasingly ***,an atomically controllable ionic conductor Li_(3)PO_(4)(LPO)coating is deposited on the LiNi_(0.90)Co_(0.06)Mn_(0.04)O_(2)(NCM9064)based electrode by the atomic layer deposition *** results shows that the LPO coating is uniformly and densely covered on the surface of secondary particles of NCM9064,helping to prevent the direct contact between the electrolyte and cathode during the chargingdischarging *** addition,the coating layer is electrochemically *** a result,the interfacial side reactions during the long cycle are effectively suppressed,and the solid electrolyte interphase layer at the interface is *** electrode with 20 layers of LPO deposition(ALD-LPO-20)exhibits an excellent capacity retention of 81%after 200 cycles in 2.8-4.3 V at 25℃,which is 18%higher than the unmodified material(ALD-LPO-0).Besides,the moderate LPO coating improves the rate capability and high temperature cycling performance of *** study provides a method for the modification of ultra-high nickel cathode materials and corresponding electrodes.

关键词： Ultra-high nickel material LiNi_(0.90)Co_(0.06)Mn_(0.04)O_(2) Atomic layer deposition Li_(3)PO_(4) ionic conductor

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Recent Advances in Nanoengineering of Electrode-Electrolyte Interfaces to Realize High-Performance Li-ion Batteries

引用

Energy & Environmental Materials 2024年第3期7卷 5-17页

作者： Na-Yeong Kim Ilgyu Kim Behnoosh Bornamehr Volker Presser Hiroyuki Ueda Ho-Jin Lee Jun Young Cheong Ji-Won Jung School of Materials Science and engineering University of Ulsan INM-Leibniz Institute for New Materials Germany Department of Materials Science and engineering saarene-Saarland center for Energy Materials and Sustainability Institute for Frontier Materials (IFM) Deakin University battery research and Innovation Hub Deakin University Bavarian center for battery technology (BayBatt) and Department of Chemistry University of Bayreuth

A suitable interface between the electrode and electrolyte is crucial in achieving highly stable electrochemical performance for Li-ion batteries,as facile ionic transport is required. Intriguing research and development have recently been conducted to form a stable interface between the electrode and electrolyte. Therefore,it is essential to investigate emerging knowledge and contextualize it. The nanoengineering of the electrode-electrolyte interface has been actively researched at the electrode/electrolyte and interphase levels. This review presents and summarizes some recent advances aimed at nanoengineering approaches to build a more stable electrodeelectrolyte interface and assess the impact of each approach ***,future perspectives on the feasibility and practicality of each approach will also be reviewed in detail. Finally,this review aids in projecting a more sustainable research pathway for a nanoengineered interphase design between electrode and electrolyte,which is pivotal for high-performance,thermally stable Li-ion batteries.

关键词： battery electrode electrolyte interface lithium nanoengineering

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Electric-controlled pressure relief valve for enhanced safety in liquid-cooled lithium-ion battery packs

引用

Journal of Energy Chemistry 2024年第3期90卷 98-109,I0004页

作者： Yuhang Song Jidong Hou Nawei Lyu Xinyuan Luo Jingxuan Ma Shuwen Chen Peihao Wu Xin Jiang Yang Jin research center of Grid Energy Storage and battery Application School of Electrical and Information EngineeringZhengzhou UniversityZhengzhou 450001HenanChina

The liquid-cooled battery energy sto rage system(LCBESS) has gained significant attention due to its superior thermal management ***,liquid-cooled battery pack(LCBP) usually has a high sealing level above IP65,which can trap flammable and explosive gases from battery thermal runaway and cause *** poses serious safety risks and challenges for *** this study,we tested overcharged battery inside a commercial LCBP and found that the conventionally mechanical pressure relief valve(PRV) on the LCBP had a delayed response and low-pressure relief efficiency.A realistic 20-foot model of an energy storage cabin was constructed using the Flacs finite element simulation *** studies were conducted to evaluate the pressure relief efficiency and the influence on neighboring battery packs in case of internal explosions,considering different sizes and installation positions of the ***,a newly developed electric-controlled PRV integrated with battery fault detection is introduced,capable of starting within 50 ms of the battery safety valve ***,the PRV was integrated with the battery management system and changed the battery charging and discharging strategy after the PRV was *** tests confirmed the efficacy of this method in preventing *** paper addresses the safety concerns associated with LCBPs and proposes an effective solution for explosion relief.

关键词： Pressure relief valve Liquid-cooled battery pack Explosion Flacs

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：