检索结果-南通市图书馆

Journal of Wuhan University of technology(Materials Science) 2024年第1期39卷 160-166页

作者： A Visagan P Ganesh department of production technology Madras Institute of TechnologyChennai-600044India

We investigated the parametric optimization on incremental sheet forming of stainless steel using Grey Relational Analysis(GRA) coupled with Principal Component Analysis(PCA). AISI 316L stainless steel sheets were used to develop double wall angle pyramid with aid of tungsten carbide tool. GRA coupled with PCA was used to plan the experiment conditions. Control factors such as Tool Diameter(TD), Step Depth(SD), Bottom Wall Angle(BWA), Feed Rate(FR) and Spindle Speed(SS) on Top Wall Angle(TWA) and Top Wall Angle Surface Roughness(TWASR) have been studied. Wall angle increases with increasing tool diameter due to large contact area between tool and workpiece. As the step depth, feed rate and spindle speed increase,TWASR decreases with increasing tool diameter. As the step depth increasing, the hydrostatic stress is raised causing severe cracks in the deformed surface. Hence it was concluded that the proposed hybrid method was suitable for optimizing the factors and response.

关键词： single point incremental forming AISI 316L taguchi grey relation analysis principal component analysis surface roughness scanning electron microscopy

Surface Modification Aspects for Improving Biomedical Properties in Implants:A Review

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第2期37卷 213-241页

作者： J.Sharath Kumar Rakesh Kumar Rajeev Verma Industrial and production department Dr B R Ambedkar National Institute of Technology JalandharJalandharPunjab144008India

The primary focus during surgery is to ensure successful implantation by achieving long-term and stable fixation of *** surgery is now more focused on the development of novel biomaterials intended to improve implant *** obtain a better understanding of metal implants,this article investigated the causes of material failures in certain cases and analysed a few case *** interaction between the implant and bone tissue was a crucial aspect of successful implantation,and this study explored the factors influencing this interaction as well as ways to improve *** modern approaches used for modifying implant surfaces were systematically illustrated and briefly *** spray coatings were often favoured because of their wide range of coating materials,but other substantial surface modifications(such as friction stir processing and laser surface texturing)were also used for a selection of ***,implant surfaces with desirable features,such as biocompatibility,antibacterial properties,corrosion resistance,and wear resistance,were essential for optimising implant *** systematic review's main aim is to provide exhaustive reference information and a broad overview to advance the production and design of orthopaedic implants.

关键词： Biomaterials Surface treatments Thermal spray coatings Antibacterial Biocompatibility Corrosion resistance Wear resistance

Experimental analysis of matrix moveable oil saturation in tight sandstone reservoirs of the south Ordos Basin,China

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Energy Geoscience 2024年第1期5卷 184-195页

作者： Ting Xu Jun Pu Xuejie Qin YiWei Science and technology Development department Petroleum Exploration&Production Research InstituteSINOPECBeijing100083China Center Research department of North China Petroleum Exploration&production Research Institute SINOPECBeijing100083China Oil Field Development department Petroleum Exploration&Production Research InstituteSINOPECBeijing100083China

Tight oil reservoirs in the south Ordos Basin are characterized by fractured,heterogeneous oil-bearing strata(an oil saturation of less than 55%on average),normal pressure(0.8±)and extra-low permeability(less than 0.3 mD).In the Chang 8 tight sandstone reservoir in Honghe oilfield,micro-and nanopores,especially those with a pore-throat radius of less than 1 mm,account for more than 90%.Fluid flow in the matrix is non-linear and crude oil flow rates are very low under normal pressure *** improved understanding of oil mobility in a tight matrix is key to further development of normalpressure tight-oil resources in the continental *** this study,constant-velocity and high-pressure mercury injection experiments were conducted using samples of typical tight sandstone cores obtained from the south of Ordos Basin.A new method for reconstructing the full-scale pore-throat distribution characteristics of tight sandstone reservoirs was established successfully,based on which multistage centrifugal tests,tests of low-pressure differential displacement of oil by water,and nuclear magnetic resonance tests were conducted in order to obtain the distribution characteristics of moveable fluid in different *** moveable oil saturation(MOS)and degree of oil recovery(*** of accumulative oil production to producing geologic reserves)of the core samples under different differential pressures for displacement were *** for the tight oil reservoirs in the south Ordos Basin,the moveable fluids are mainly stored in sub-micron(0.10-0.5 mm)*** Type I reservoirs(k>0.1 mD),the volume percentage of moveable fluid in pores with a radius larger than 0.5 mm is relatively high(greater than 40%).The degree of oil recovery of water flooding serves as the basis for forecasting recoverable reserves for tight oil *** reserves under water flooding,mainly occur in pores with a radius greater than 0.5 *** contribution of Type I reserves to oil pro

关键词： Tight reservoir Pore-throat structure Moveable fluid volume Moveable oil saturation(MOS) Waterflooding oil recovery South Ordos basin

Review of construction and demolition waste management tools and frameworks with the classification,causes,and impacts of the waste

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Waste Disposal and Sustainable Energy 2024年第1期6卷 95-121页

作者： Dewan Sabbir Ahammed Rayhan Iftekhar Uddin Bhuiyan Institute of Appropriate technology(IAT) Bangladesh University of Engineering and Technology(BUET)DhakaBangladesh department of Industrial and production Engineering(IPE) National Institute of Textile Engineering and Research(NITER)NayarhatSavarDhakaBangladesh

This review looks over the current construction and demolition waste management(C&DWM)situations by scrutinizing the definition,classification,components,compositions,generated sources and causes,impacts of generated construction and demolition wastes(C&DWs),waste management hierarchy(WMH),3R principles(Reduce,Reuse,and Recycle),Circular Economy(CE),frameworks,tools,and approaches of C&*** reviewing the literature this study contributes to the literature by the following means:(a)suitable working definitions of C&DW and C&DWM are provided,(b)an expanded WMH for construction and demolition operations is presented,(c)frameworks of C&DWM are identified and listed as follows:frameworks based on WMH,including 3R principles and CE concept,frameworks focusing on the quantification,estimation,and prediction of generated C&DW,frameworks focusing on effective and sustainable C&DWM,frameworks focusing economic,social,and environmental performance assessment,frameworks based on multi-criteria analysis(MCA),frameworks based on post-disaster recovery period,and other miscellaneous frameworks,and(d)four categories of tools utilized in C&DWM are identified and explained,namely,approaches employed in C&DWM,information technology(IT)tools employed in C&DWM,multi-criteria decision analysis(MCDA)tools employed in C&DWM,and C&DWM ***,this study also found that CE,and green rating system(GRS)are widely used approaches,Building Information Modeling(BIM),Radio Frequency Identification(RFID),Geographic Information System,and Big Data are the extensively used IT tools,Analytical Hierarchy Process,FUZZY,TOPSIS(Technique for Order Preference by Similarity to the Ideal Solution),Weighted Summation,Elimination and Choice Expressing the Reality II,Elimination and Choice Expressing the Reality III,Evaluation of Mixed Data,and REGIME(REG)are the widely used MCA tools in C&DWM,and Prefabricated Construction and Modular Construction are broadly used C&DWM ***

关键词： Construction and demolition waste Construction and demolition waste management Frameworks and tools 3R principles(Reduce,Reuse,&Recycle) Waste management hierarchy

An approach of the internal friction-dependent temperature changes for conventional and pure biogenic lubricating greases

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Friction 2024年第4期12卷 780-795页

作者： Leif AHME Erik KUHN MiguelÁngel DELGADO department of Mechanical Engineering and production Management Hamburg University of Applied SciencesHamburg 20099Germany department of Chemical Engineering Research in Product Technology and Chemical Processes(Pro2TecS)University of HuelvaHuelva 21071Spain

This work investigated the temperature changes inside the bulk of lubricating greases under controlled high-shear stress conditions(250-500 s-1).For this purpose,a newly developed temperature-measuring cell called Calidus was successfully *** temperature changes(ΔT)have been related to the greases'components(thickener,base oil-type,and composition)and the structural degradation of the lubricating ***,a theoretical approach was proposed for calculating the internal temperature change of lubricating greases during shear *** greases showed an internal temperature profile characterised by a sudden rise inΔT within the first 4 h from starting the test and subsequentΔT decay until it reaches the steady state ***,it was found that greases C1 and C5,formulated with lithium and calcium soap,respectively,with different soap content(16.1 wt%and 9.7 wt%,respectively),but the same base castor oil,showed the highest value of the maximumΔT,c.a.3.2 K,and the most drastic drop ofΔ*** greases showed both the highest specific densities and heat *** addition,they showed the lowest ratio of expended energies(Rtee),which means more structural degradation in the stressed *** the contrary,the grease C3,with 13 wt%of Li-soap but the lowest base oil's viscosity,showed the lowest maximumΔT and the temperature profile was characterised by a moderate variation ofΔT along the *** biogenic grease B3 developed a low-temperature change in the group of pure bio-genic greases close to grease C3.

关键词： shear-induced structural degradation rheology temperature measurements lubricating greases density lubricating greases specific heat capacities

Tuning the crystallinity of titanium nitride on copper-embedded carbon nanofiber interlayers for accelerated electrochemical kinetics in lithium-sulfur batteries

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Carbon Energy 2024年第6期6卷 40-55页

作者： Yinyu Xiang Liqiang Lu Feng Yan Debarun Sengupta Petra Rudolf Ajay Giri Prakash Kottapalli Yutao Pei Advanced production Engineering Engineering and Technology Institute GroningenUniversity of GroningenGroningenThe Netherlands Zernike Institute for Advanced Materials University of GroningenGroningenThe Netherlands

The development of lithium-sulfur(Li-S)batteries is hindered by the disadvantages of shuttling of polysulfides and the sluggish redox kinetics of the conversion of sulfur species during discharge and ***,the crystallinities of a titanium nitride(TiN)film on copper-embedded carbon nanofibers(Cu-CNFs)are regulated and the nanofibers are used as interlayers to resolve the aforementioned crucial issues.A low-crystalline TiN-coated Cu-CNF(L-TiN-Cu-CNF)interlayer is compared with its highly crystalline counterpart(H-TiN-Cu-CNFs).It is demonstrated that the L-TiN coating not only strengthens the chemical adsorption toward polysulfides but also greatly accelerates the electrochemical conversion of *** to robust carbon frameworks and enhanced kinetics,impressive highrate performance at 2 C(913 mAh g^(-1)based on sulfur)as well as remarkable cyclic stability up to 300 cycles(626 mAh g^(-1))with capacity retention of 46.5%is realized for L-TiN-Cu-CNF interlayer-configured Li-S *** under high loading(3.8 mg cm^(-2))of sulfur and relatively lean electrolyte(10μL electrolyte per milligram sulfur)conditions,the Li-S battery equipped with L-TiN-Cu-CNF interlayers delivers a high capacity of 1144 mAh g^(-1)with cathodic capacity of 4.25 mAh cm^(-2)at 0.1 C,providing a potential pathway toward the design of multifunctional interlayers for highly efficient Li-S batteries.

关键词： crystallinity electrochemical kinetics interlayer lithium-sulfur batteries titanium nitride

Heterogeneous information phase space reconstruction and stability prediction of filling body–surrounding rock combination

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第7期31卷 1500-1511页

作者： Dapeng Chen Shenghua Yin Weiguo Long Rongfu Yan Yufei Zhang Zepeng Yan Leiming Wang Wei Chen School of Civil and Resources Engineering University of Science and Technology of BeijingBeijing 100083China production technology department Longshou MineJinchuan Group Co.Ltd.Jinchang 737100China School of Civil Engineering and Architecture East China Jiaotong UniversityNanchang 330013China

Traditional research believes that the filling body can effectively control stress concentration while ignoring the problems of unknown stability and the complex and changeable stress distribution of the filling body–surrounding rock combination under high-stress *** monitoring data processing methods cannot fully consider the complexity of monitoring objects,the diversity of monitoring methods,and the dynamics of monitoring *** solve this problem,this paper proposes a phase space reconstruction and stability prediction method to process heterogeneous information of backfill–surrounding rock *** three-dimensional monitoring system of a large-area filling body–surrounding rock combination in Longshou Mine was constructed by using drilling stress,multipoint displacement meter,and *** information,such as the stress and displacement of the filling body–surrounding rock combination,was continuously *** with the average mutual information method and the false nearest neighbor point method,the phase space of the heterogeneous information of the filling body–surrounding rock combination was then *** this paper,the distance between the phase point and its nearest point was used as the index evaluation distance to evaluate the stability of the filling body–surrounding rock *** evaluated distances(ED)revealed a high sensitivity to the stability of the filling body–surrounding rock *** new method was then applied to calculate the time series of historically ED for 12 measuring points located at Longshou *** moments of mutation in these time series were at least 3 months ahead of the roadway return *** the ED prediction experiments,the autoregressive integrated moving average model showed a higher prediction accuracy than the deep learning models(long short-term memory and Transformer).Furthermore,the root-mean-square error distribution of the prediction results peaked at 0

关键词： deep mining filling body–surrounding rock combination phase space reconstruction multiple time series stability prediction

IR-YOLO: Real-Time Infrared Vehicle and Pedestrian Detection

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2024年第2期78卷 2667-2687页

作者： Xiao Luo Hao Zhu Zhenli Zhang department of Electrical Engineering and Automation Jiangxi University of Science and TechnologyGanzhou341000China Jiangxi Provincial Key Laboratory of Maglev technology Ganzhou341000China Graduate School of Information Production and SystemsWaseda UniversityKitakyushu-shiFukuoka808-0135Japan

Road traffic safety can decrease when drivers drive in a low-visibility *** application of visual perception technology to detect vehicles and pedestrians in infrared images proves to be an effective means of reducing the risk of *** tackle the challenges posed by the low recognition accuracy and the substan-tial computational burden associated with current infrared pedestrian-vehicle detection methods,an infrared pedestrian-vehicle detection method A proposal is presented,based on an enhanced version of You Only Look Once version 5(YOLOv5).First,A head specifically designed for detecting small targets has been integrated into the model to make full use of shallow feature information to enhance the accuracy in detecting small ***,the Focal Generalized Intersection over Union(GIoU)is employed as an alternative to the original loss function to address issues related to target overlap and category ***,the distribution shift convolution optimization feature extraction operator is used to alleviate the computational burden of the model without significantly compromising detection *** test results of the improved algorithm show that its average accuracy(mAP)reaches 90.1%.Specifically,the Giga Floating Point Operations Per second(GFLOPs)of the improved algorithm is only *** contrast,the improved algorithms outperformed the other algorithms on similar GFLOPs,such as YOLOv6n(11.9),YOLOv8n(8.7),YOLOv7t(13.2)and YOLOv5s(16.0).The mAPs that are 4.4%,3%,3.5%,and 1.7%greater than those of these algorithms show that the improved algorithm achieves higher accuracy in target detection tasks under similar computational resource *** the other hand,compared with other algorithms such as YOLOv8l(91.1%),YOLOv6l(89.5%),YOLOv7(90.8%),and YOLOv3(90.1%),the improved algorithm needs only 5.5%,2.3%,8.6%,and 2.3%,respectively,of the *** improved algorithm has shown significant advancements in balancing accuracy and computati

关键词： Traffic safety infrared image pedestrians and vehicles focal GIoU distributed shift convolution

Gut microbiota intervention attenuates thermogenesis in broilers exposed to high temperature through modulation of the hypothalamic 5‑HT pathway

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Animal Science and Biotechnology 2024年第2期15卷 679-698页

作者： Sheng Li Xiaoqing Li Kai Wang Yansen Li Kentaro Nagaoka Chunmei Li Research Centre for Livestock Environmental Control and Smart production College of Animal Science and TechnologyNanjing Agricultural UniversityNanjing 210095China Laboratory of Veterinary Physiology Department of Veterinary MedicineFaculty of AgricultureTokyo University of Agriculture and TechnologyTokyo 183‑8509Japan

Background Broilers have a robust metabolism and high body temperature,which make them less tolerant to hightemperature(HT)environments and more susceptible to challenges from elevated *** microbes,functioning as symbionts within the host,possess the capacity to significantly regulate the physiological functions and environmental adaptability of the *** study aims to investigate the effects of gut microbial intervention on the body temperature and thermogenesis of broilers at different ambient temperatures,as well as the underlying mechanism involving the"gut-brain"*** Broilers were subjected to gut microbiota interference with or without antibiotics(control or ABX)starting at 1 day of *** 21 day of age,they were divided into 4 groups and exposed to different environments for 7 d:The control and ABX groups at room temperature(RT,24±1℃,60%relative humidity(RH),24 h/d)and the control-HT and ABX-HT groups at high temperature(HT,32±1℃,60%RH,24 h/d).Results The results demonstrated that the antibiotic-induced gut microbiota intervention increased body weight and improved feed conversion in broiler chickens(P<0.05).Under HT conditions,the microbiota intervention reduced the rectal temperature of broiler chickens(P<0.05),inhibited the expression of avUCP and thermogenesisrelated genes in breast muscle and liver(P<0.05),and thus decreased thermogenesis ***,the gut microbiota intervention blunted the hypothalamic‒pituitary‒adrenal axis and hypothalamic–pituitary–thyroid axis activation induced by HT *** analyzing the cecal microbiota composition of control and ABX chickens maintained under HT conditions,we found that Alistipes was enriched in control *** contrast,antibioticinduced gut microbiota intervention resulted in a decrease in the relative abundance of Alistipes(P<0.05).Moreover,this difference was accompanied by increased hypothalamic 5-hydroxytryptamine(5-HT)content and TPH2 expression(P<0.05).Conclus

关键词： 5-HT Broiler chickens Gut microbiota Thermogenesis Thermoregulation

Enhancing the Decomposition of Paper Cups Using Galleria Mellonella and Eisenia Fetida

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Journal of Renewable Materials 2024年第2期12卷 349-367页

作者： Shadi Moqbel Habib Al-Ghoul Abd Al-Majeed Al-Ghzawi Rami Mukbel Civil Engineering department The University of JordanAmman11942Jordan department of Chemistry Technical University of MunichMunichGermany Plant production Jordan University of Science and TechnologyIrbid22110Jordan Basic Medical Veterinary Sciences Jordan University of Science and TechnologyIrbid22110Jordan

The composition of paper cups creates a challenge for the recycling industry,as the paperboard–plastic film composite is hard to ***,paper cups are sent to landfills or waste *** study explores the combined use of red worms(Eisenia fetida)and Greater wax moth(Galleria mellonella)in the biodegradation of paper *** study investigates the conditions and combinations that promote using Eisenia fetida and Galleria mellonella for degrading paper *** study considered the influence of environmental temperature,the presence of food waste,varying the number of Eisenia fetida worms,and the presence of a Galleria mellonella growth-slowing agent on the degradation *** achieve the study objectives,the study followed a quantitative *** study monitored the degradation of paper cup cuts that were placed in jars containing different combinations of Eisenia fetida worms,Galleria mellonella larvae,food waste,bedding material,and Galleria mellonella growth-slowing *** study found that the best operating temperature is *** study found that using food waste improves the performance of Eisenia fetida worms and Galleria mellonella larvae *** study found that adding a Galleria mellonella growth-slowing agent slightly enhances the degradation of the paper ***,a numerical model was obtained to simulate the paper cup degradation efficiency.

关键词： Paper cups resource recovery recycling circular economy Galleria mellonella Eisenia fetida