检索结果-南通市图书馆

Review of construction and demolition waste management tools and frameworks with the classification,causes,and impacts of the waste

引用

Waste Disposal and Sustainable Energy 2024年第1期6卷 95-121页

作者： Dewan Sabbir Ahammed Rayhan Iftekhar Uddin Bhuiyan Institute of Appropriate Technology(IAT) Bangladesh University of Engineering and Technology(BUET)DhakaBangladesh department of Industrial and production engineering(IPE) National Institute of Textile Engineering and Research(NITER)NayarhatSavarDhakaBangladesh

This review looks over the current construction and demolition waste management(C&DWM)situations by scrutinizing the definition,classification,components,compositions,generated sources and causes,impacts of generated construction and demolition wastes(C&DWs),waste management hierarchy(WMH),3R principles(Reduce,Reuse,and Recycle),Circular Economy(CE),frameworks,tools,and approaches of C&DWM.After reviewing the literature this study contributes to the literature by the following means:(a)suitable working definitions of C&DW and C&DWM are provided,(b)an expanded WMH for construction and demolition operations is presented,(c)frameworks of C&DWM are identified and listed as follows:frameworks based on WMH,including 3R principles and CE concept,frameworks focusing on the quantification,estimation,and prediction of generated C&DW,frameworks focusing on effective and sustainable C&DWM,frameworks focusing economic,social,and environmental performance assessment,frameworks based on multi-criteria analysis(MCA),frameworks based on post-disaster recovery period,and other miscellaneous frameworks,and(d)four categories of tools utilized in C&DWM are identified and explained,namely,approaches employed in C&DWM,information technology(IT)tools employed in C&DWM,multi-criteria decision analysis(MCDA)tools employed in C&DWM,and C&DWM technologies.Moreover,this study also found that CE,and green rating system(GRS)are widely used approaches,Building Information Modeling(BIM),Radio Frequency Identification(RFID),Geographic Information System,and Big Data are the extensively used IT tools,Analytical Hierarchy Process,FUZZY,TOPSIS(Technique for Order Preference by Similarity to the Ideal Solution),Weighted Summation,Elimination and Choice Expressing the Reality II,Elimination and Choice Expressing the Reality III,Evaluation of Mixed Data,and REGIME(REG)are the widely used MCA tools in C&DWM,and Prefabricated Construction and Modular Construction are broadly used C&DWM technologies.Furthermore,it has been observed that the application of

关键词： Construction and demolition waste Construction and demolition waste management Frameworks and tools 3R principles(Reduce,Reuse,&Recycle) Waste management hierarchy

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A Hybrid Optimization Approach of Single Point Incremental Sheet Forming of AISI 316L Stainless Steel Using Grey Relation Analysis Coupled with Principal Component Analysiss

引用

Journal of Wuhan University of Technology(Materials Science) 2024年第1期39卷 160-166页

作者： A Visagan P Ganesh department of production Technology Madras Institute of TechnologyChennai-600044India

We investigated the parametric optimization on incremental sheet forming of stainless steel using Grey Relational Analysis(GRA) coupled with Principal Component Analysis(PCA). AISI 316L stainless steel sheets were used to develop double wall angle pyramid with aid of tungsten carbide tool. GRA coupled with PCA was used to plan the experiment conditions. Control factors such as Tool Diameter(TD), Step Depth(SD), Bottom Wall Angle(BWA), Feed Rate(FR) and Spindle Speed(SS) on Top Wall Angle(TWA) and Top Wall Angle Surface Roughness(TWASR) have been studied. Wall angle increases with increasing tool diameter due to large contact area between tool and workpiece. As the step depth, feed rate and spindle speed increase,TWASR decreases with increasing tool diameter. As the step depth increasing, the hydrostatic stress is raised causing severe cracks in the deformed surface. Hence it was concluded that the proposed hybrid method was suitable for optimizing the factors and response.

关键词： single point incremental forming AISI 316L taguchi grey relation analysis principal component analysis surface roughness scanning electron microscopy

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

An approach of the internal friction-dependent temperature changes for conventional and pure biogenic lubricating greases

引用

Friction 2024年第4期12卷 780-795页

作者： Leif AHME Erik KUHN MiguelÁngel DELGADO department of Mechanical engineering and production Management Hamburg University of Applied SciencesHamburg 20099Germany department of Chemical engineering Research in Product Technology and Chemical Processes(Pro2TecS)University of HuelvaHuelva 21071Spain

This work investigated the temperature changes inside the bulk of lubricating greases under controlled high-shear stress conditions(250-500 s-1).For this purpose,a newly developed temperature-measuring cell called Calidus was successfully tested.The temperature changes(ΔT)have been related to the greases'components(thickener,base oil-type,and composition)and the structural degradation of the lubricating greases.Furthermore,a theoretical approach was proposed for calculating the internal temperature change of lubricating greases during shear stress.All greases showed an internal temperature profile characterised by a sudden rise inΔT within the first 4 h from starting the test and subsequentΔT decay until it reaches the steady state value.Furthermore,it was found that greases C1 and C5,formulated with lithium and calcium soap,respectively,with different soap content(16.1 wt%and 9.7 wt%,respectively),but the same base castor oil,showed the highest value of the maximumΔT,c.a.3.2 K,and the most drastic drop ofΔT.These greases showed both the highest specific densities and heat capacities.In addition,they showed the lowest ratio of expended energies(Rtee),which means more structural degradation in the stressed grease.On the contrary,the grease C3,with 13 wt%of Li-soap but the lowest base oil's viscosity,showed the lowest maximumΔT and the temperature profile was characterised by a moderate variation ofΔT along the test.The biogenic grease B3 developed a low-temperature change in the group of pure bio-genic greases close to grease C3.

关键词： shear-induced structural degradation rheology temperature measurements lubricating greases density lubricating greases specific heat capacities

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

High-temperature tribological performance of functionally graded Stellite 6/WC metal matrix composite coatings manufactured by laser-directed energy deposition

引用

Friction 2024年第3期12卷 522-538页

作者： Marta OSTOLAZA Alaitz ZABALA Jon Inaki ARRIZUBIETA Iñigo LLAVORI Nagore OTEGI Aitzol LAMIKIZ department of Mechanical engineering University of the Basque Country UPV/EHUPlaza Torres Quevedo 1Bilbo 48013Spain Faculty of engineering Mechanics and Industrial ProductionMondragon UnibertsitateaLoramendi 4Mondragon 20500Spain

Wear-driven tool failure is one of the main hurdles in the industry.This issue can be addressed through surface coating with ceramic-reinforced metal matrix composites.However,the maximum ceramic content is limited by cracking.In this work,the tribological behaviour of the functionally graded WC-ceramic-particlereinforced Stellite 6 coatings is studied.To that end,the wear resistance at room temperature and 400°C is investigated.Moreover,the tribological analysis is supported by crack sensitivity and hardness evaluation,which is of utmost importance in the processing of composite materials with ceramic-particle-reinforcement.Results indicate that functionally graded materials can be employed to increase the maximum admissible WC content,hence improving the tribological behaviour,most notably at high temperatures.Additionally,a shift from abrasive to oxidative wear is observed in high-temperature wear testing.

关键词： friction coating metal matrix composite functionally graded materials high temperature laserdirected energy deposition

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A New Distribution Method for Wet Steam Injection Optimization

引用

Fluid Dynamics & Materials Processing 2024年第1期20卷 109-126页

作者： Jingjing Gao Xingkai Zhang Hubei Key Laboratory of Oil and Gas Drilling and production engineering Yangtze UniversityWuhan434000China

A new approach and a new related distribution system are proposed to address the issue of uneven steam injection caused by the different suction capacities of the used wells during the application of steam“stimulation”methods for enhanced oil recovery.The new distribution system consists of a swirler,spiral dividing baffles,and critical flow nozzles.Numerical simulations are used to analyze the flow-field and degree of steam homogeneity obtained with such an approach.The results indicate that a higher inlet pressure leads to better results.Additionally,the internal flow field becomes more stable,and the deviation from an even distribution reduces to±4.0%even when the resistance of each branch is inconsistent.Furthermore,field tests have yielded satisfactory results.

关键词： Cyclical steam stimulation homogeneous distribution gas-liquid two-phase flow critical flow nozzle

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Experimental investigation on slip conditions during thread rolling with flat dies

引用

Friction 2024年第1期12卷 136-143页

作者： Stefan VOLZ Peter GROCHE Institute for production engineering and Forming Machines Technical University DarmstadtOtto-Berndt Straße 2Darmstadt 64287Germany

The process design of flat die rolling operations can be a tedious and costly process due to the challenges posed by small process windows.Within this work,an effort is made to closely investigate and understand the process limits caused by excessive slippage of the workpiece.Optical measurements are carried out to capture the characteristics of excessive slippage and the influence of the stroke rate and the tribological system on this process limit.Large differences in slippage were observed,depending on the tribological system.While systems with polymer based lubricants showed excessive slippage at low stroke rates,systems using oil or no lubricant endured higher stroke rates before process limits were reached.The optical measurements revealed three major forms of slippage:successful rolling without slippage,failure due to excessive slippage at process start,and failure due to excessive slippage at around one workpiece rotation.

关键词： rolling incremental forming thread rolling slippage profile rolling

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Synergistic enhancement of Ce-ZnO/g-C_(3)N_(4)photocatalytic performance using N,O-bis-vacancy induction and S-scheme heterojunctions

引用

Journal of Rare Earths 2024年第5期42卷 817-826,I0001页

作者： Guyu Zhang Yuan Zhang Xinlei Zhao Yujiang Jiao Yumin Yan Jianhui Jiang engineering Laboratory of Chemical Resources Utilization in South Xinjiang of Xinjiang production and Construction Corps College of Chemistry a Chemical EngineeringTarimUniversityAlar843300China

The photocatalytic decontamination of organic pollutants is an environmentally friendly and efficient water treatment method.The introduction of vacancies,heterojunctions,and doping can enhance the performance of photocatalysts for such applications.In this study,N,O double-vacancy Ce-ZnO/g-C_(3)N_(4)S-scheme heterojunction photocatalysts were prepared,It is found that the electron separation and transfer efficiencies are considerably improved by the presence of nitrogen vacancies in graphitic ca rbon nitride(g-C_(3)N_(4))and oxygen vacancies in ZnO,in addition to the S-scheme heterojunction created between the two materials.In the degradation of methylene blue and ciprofloxacin,the degradation rates exhibited by Ce-ZnO/g-C_(3)N_(4)are significantly higher than those of the g=C_(3)N_(4)/ZnO system.This remarkable photocatalytic performance of Ce-ZnO/g-C_(3)N_(4)may result from three key factors;(ⅰ)Ce doping,which produces impurity energy levels;(ⅱ)the generation of electron capture centres by the N and O vacancies;and(ⅲ)the synergistic effect of the S-type heterojunction formed at the interface between the two materials,This study therefore provides new approaches for the use of doping,vacancies,and heterojunctions to induce the efficient degradation of organic pollutants.

关键词： Photocatalysis Vacancy S-scheme Ce-ZnO/g-C_(3)N_(4) Degradation Rare earths

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Abomasal infusion of branched-chain amino acids or branched-chain keto-acids alter lactation performance and liver triglycerides in fresh cows

引用

Journal of Animal Science and Biotechnology 2024年第3期15卷 1145-1157页

作者： Kristen Gallagher Isabelle Bernstein Cynthia Collings David Main Ghayyoor Ahmad Sarah Naughton Jayasimha Daddam Vengai Mavangira Mike Vandehaar Zheng Zhou department of Animal Science Michigan State UniversityEast Lansing 48824USA department of Veterinary Diagnostic and production Animal Medicine Ames 50011USA

Background Dairy cows are at high risk of fatty liver disease in early lactation,but current preventative measures are not always effective.Cows with fatty liver have lower circulating branched-chain amino acid(BCAA)concentra-tions whereas cows with high circulating BCAA levels have low liver triglyceride(TG).Our objective was to determine the impact of BCAA and their corresponding ketoacids(branched-chain ketoacids,BCKA)on production performance and liver TG accumulation in Holstein cows in the first 3 weeks postpartum.Methods Thirty-six multiparous Holstein cows were used in a randomized block design experiment.Cows were abomasally infused for the first 21 d postpartum with solutions of 1)saline(CON,n=12);2)BCA(67 g valine,50 g leu-cine,and 34 g isoleucine,n=12);and 3)BCK(77 g 2-ketovaline calcium salt,57 g 2-ketoleucine calcium salt,and 39 g 2-ketoisoleucine calcium salt,n=12).All cows received the same diet.Treatment effects were determined using PROC GLIMMIX in SAS.Results No differences were detected for body weight,body condition score,or dry matter intake averaged over the first 21 d postpartum.Cows receiving BCK had significantly lower liver TG concentrations compared to CON(6.60%vs.4.77%,standard error of the mean(SEM)0.49)during the first 3 weeks of lactation.Infusion of BCA increased milk yield(39.5 vs.35.3 kg/d,SEM 1.8),milk fat yield(2.10 vs.1.69 kg/d,SEM 0.08),and lactose yield(2.11 vs.1.67 kg/d,SEM 0.07)compared with CON.Compared to CON,cows receiving BCA had lower plasma glucose(55.0 vs.59.2 mg/dL,SEM 0.86)but higherβ-hydroxybutyrate(9.17 vs.6.00 mg/dL,SEM 0.80).Conclusions Overall,BCAA supplementation in this study improved milk production,whereas BCKA supplementa-tion reduced TG accumulation in the liver of fresh cows.

关键词： Branched-chain amino acids Branched-chain ketoacids Fatty liver Fresh cow

来源：

维普期刊数据库博看期刊

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

The BTB/TAZ domain-containing protein CmBT1-mediated CmANR1 ubiquitination negatively regulates root development in chrysanthemum

引用

Journal of Integrative Plant Biology 2024年第2期66卷 285-299页

作者： Lian-Da Du Zhang-Ji Guan Yan-Hong Liu Hui-Dong Zhu Quan Sun Da-Gang Hu Cui-Hui Sun Shandong Collaborative Innovation Center of Fruit&Vegetable Quality and Efficient production College of Horticulture Science and EngineeringShandong Agricultural UniversityTaian 271018China

Roots are fundamental for plants to adapt to variable environmental conditions.The development of a robust root system is orchestrated by numerous genetic determinants and,among them,the MADS-box gene ANR1 has garnered substantial attention.Prior research has demonstrated that,in chrysanthemum,CmANR1positively regulates root system development.Nevertheless,the upstream regulators involved in the CmANR1-mediated regulation of root development remain unidentified.In this study,we successfully identified bric-a-brac,tramtrack and broad(BTB)and transcription adapter putative zinc finger(TAZ)domain protein CmBT1 as the interacting partner of CmANR1 through a yeasttwo-hybrid(Y2H)screening library.Furthermore,we validated this physical interaction through bimolecular fluorescence complementation and pull-down assays.Functional assays revealed that CmBT1 exerted a negative influence on root development in chrysanthemum.In both in vitro and in vivo assays,it was evident that CmBT1mediated the ubiquitination of CmANR1 through the ubiquitin/26S proteasome pathway.This ubiquitination subsequently led to the degradation of the CmANR1 protein and a reduction in the transcription of CmANR1-targeted gene CmPIN2,which was crucial for root development in chrysanthemum.Genetic analysis suggested that CmBT1 modulated root development,at least in part,by regulating the level of CmANR1 protein.Collectively,these findings shed new light on the regulatory role of CmBT1 in degrading CmANR1 through ubiquitination,thereby repressing the expression of its targeted gene and inhibiting root development in chrysanthemum.

关键词： chrysanthemum MADS-box transcription factor root development

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Synergistic effect of adsorption and photocatalytic degradation of oilfield-produced water by electrospun photocatalytic fibers of Polystyrene/Nanorod-Graphitic carbon nitride

引用

Journal of Environmental Sciences 2024年第7期141卷 287-303页

作者： Parisa Azmoon Mehrdad Farhadian Alireza Pendashteh Amir H.Navarchian department of Chemical engineering Faculty of EngineeringUniversity of IsfahanIsfahanIran department of Chemical engineering Faculty of EngineeringUniversity of GuilanRashtIran department of Water and Environmental engineering Caspian Sea Basin Research CenterUniversity of GuilanRashtIran

Graphitic carbon nitride with nanorod structure(Nr-GCN)was synthesized using melamine as a precursor without any other reagents by hydrothermal pretreatment method.XRD,FTIR,SEM,N_(2)adsorption-desorption from BET,UV-Vis DRS spectroscopy,and photoluminescence were used to characterize the prepared samples.Also,the photoelectrochemical behavior of nanoparticles was studied by photocurrent transient response and cyclic voltammetry analysis.Polystyrene(PS)fibrous mat was fabricated by electrospinning technique and used as a support for the stabilization of the nanoparticles.The performance of the synthesized nanoparticles and photocatalytic fibers(PS/Nr-GCN)was evaluated in oilfield-produced water treatment under visible light irradiation.During this process,oil contaminants were adsorbed by hydrophobic polystyrene fibers and simultaneously degraded by Nr-GCN.The removal efficiency of chemical oxygen demand(COD)has been obtained 96.6%and 98.4%by Nr-GCN and PS/Nr-GCN,respectively,at the optimum conditions of pH4,photocatalyst dosage 0.5 g/L,COD initial concentration 550 mg/L,and illumination time 150 min.The gas chromatography-mass spectroscopy analysis results showed 99.3%removal of total petroleum hydrocarbons using photocatalytic fibers of PS/Nr-GCN.The results demonstrated that the GCN has outstanding features like controllable morphology,visible-light-driven,and showing high potential in oily wastewater remediation.Moreover,the synergistic effect of adsorption and photocatalytic degradation is an effective technique in oilfield-produced water treatment.

关键词： Graphitic carbon nitride(GCN) Nanorod structure Polystyrene fibrous mat Photocatalytic fibers Oilfield-produced water(OPW)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：