检索结果-南通市图书馆

Time-dependent model for two-phase flow in ultra-high water-cut reservoirs: Time-varying permeability and relative permeability

引用

petroleum Science 2024年第4期21卷 2536-2553页

作者： Shao-Chun Wang Na Zhang Zhi-Hao Tang Xue-Fei Zou Qian Sun Wei Liu College of Energy Resources Chengdu University of Technology College of petroleum Engineering Shandong Institute of Petroleum and Chemical Technology

For the ultra-high water-cut reservoirs, after long-term water injection exploitation, the physical properties of the reservoir change and the heterogeneity of the reservoir becomes increasingly severe, which further aggravates the spatial difference of the flow field. In this study, the displacement experiments were employed to investigate the variations in core permeability, porosity, and relative permeability after a large amount of water injection. A relative permeability endpoint model was proposed by utilizing the alternating conditional expectation(ACE) transformation to describe the variation in relative permeability based on the experimental data. Based on the time dependent models for permeability and relative permeability, the traditional oil-water two-phase model was improved and discretized using the mimetic finite difference method(MFD). The two cases were launched to confirm the validation of the proposed model. The impact of time-varying physical features on reservoir production performance was studied in a real water flooding reservoir. The experimental results indicate that the overall relative permeability curve shifts to the right as water injection increases. This shift corresponds to a transition towards a more hydrophilic wettability and a decrease in residual oil saturation. The endpoint model demonstrates excellent accuracy and can be applied to time-varying simulations of reservoir physics. The impact of variations in permeability and relative permeability on the reservoir production performance yields two distinct outcomes. The time-varying permeability of the reservoir results in intensified water channeling and poor development effects. On the other hand, the time-varying relative permeability enhances the oil phase seepage capacity, facilitating oil displacement. The comprehensive time-varying behavior is the result of the combined influence of these two parameters, which closely resemble the actual conditions observed in oil field expl

关键词： Mimetic finite difference Water flooding reservoir Time-varying physical properties Numerical simulation

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Molecular insights into oil detachment from hydrophobic quartz surfaces in clay-hosted nanopores during steam-surfactant co-injection

引用

petroleum Science 2024年第4期21卷 2457-2468页

作者： Ben-Jie-Ming Liu Xuan-Tong Lei Mohammadali Ahmadi Zhangxin Chen Department of Chemical and petroleum Engineering University of Calgary Eastern institute of technology

Thermal recovery techniques for producing oil sands have substantial environmental impacts. Surfactants can efficiently improve thermal bitumen recovery and reduce the required amount of steam. Such a technique requires solid knowledge about the interaction mechanism between surfactants, bitumen,water, and rock at the nanoscale level. In particular, oil sands ores have extremely complex mineralogy as they contain many clay minerals(montmorillonite, illite, kaolinite). In this study, molecular dynamics simulation is carried out to elucidate the unclear mechanisms of clay minerals contributing to the bitumen recovery under a steam-anionic surfactant co-injection process. We found that the clay content significantly influenced an oil detachment process from hydrophobic quartz surfaces. Results reveal that the presence of montmorillonite, illite, and the siloxane surface of kaolinite in nanopores can enhance the oil detachment process from the hydrophobic surfaces because surfactant molecules have a stronger tendency to interact with bitumen and quartz. Conversely, the gibbsite surfaces of kaolinite curb the oil detachment process. Through interaction energy analysis, the siloxane surfaces of kaolinite result in the most straightforward oil detachment process. In addition, we found that the clay type presented in nanopores affected the wettability of the quartz surfaces. The quartz surfaces associated with the gibbsite surfaces of kaolinite show the strongest hydrophilicity. By comparing previous experimental findings with the results of molecular dynamics(MD) simulations, we observed consistent wetting characteristics. This alignment serves to validate the reliability of the simulation outcomes. The outcome of this paper makes up for the lack of knowledge of a surfactant-assisted bitumen recovery process and provides insights for further in-situ bitumen production engineering designs.

关键词： Clay minerals Bitumen Contact angle Interaction energy Surfactant Molecular dynamics

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Adsorption behavior of CO2/H2S mixtures in calcite slit nanopores for CO2 storage:An insight from molecular perspective

引用

petroleum Science 2024年第4期21卷 2444-2456页

作者： Cheng Qian Zhen-Hua Rui Yue-Liang Liu Kai Du Chen Liu Yang Zhao Xiao-Min Ma State Key Laboratory of petroleum Resources and Engineering China University of Petroleum College of petroleum Engineering China University of Petroleum College of Carbon Neutrality Future technology China University of Petroleum College of petroleum China University of Petroleum-Beijing at Karamay College of Mining Engineering Taiyuan University of Technology

It is acknowledged that injecting CO2into oil reservoirs and saline aquifers for storage is a practical and affordable method for *** CO2produced from industrial exhaust contains impurity gases such as H2S that might impact CO2sequestration due to competitive *** study makes a commendable effort to explore the adsorption behavior of CO2/H2S mixtures in calcite slit *** Canonical Monte Carlo（GCMC） simulation is employed to reveal the adsorption of CO2,H2S as well as their binary mixtures in calcite *** show that the increase in pressure and temperature can promote and inhibit the adsorption capacity of CO2and H2S in calcite nanopores,***2exhibits stronger adsorption on calcite surface than *** energy plays the dominating role in the adsorption *** energy accounts for 97.11% of the CO2-calcite interaction energy and 56.33% of the H2S-calcite interaction energy at 10 MPa and 323.15 *** presence of H2S inhibits the CO2adsorption in calcite nanopores due to competitive adsorption,and a higher mole fraction of H2S leads to less *** quantity of CO2adsorbed is lessened by approximately 33% when the mole fraction of H2S reaches ***2molecules preferentially occupy the regions near the po re wall and H2S molecules tend to reside at the center of nanopore even when the molar ratio of CO2is low,indicating that CO2has an adsorption priority on the calcite surface over *** addition,moisture can weaken the adsorption of both CO2and H2S,while CO2is more *** interestingly,we find that pure CO2is more suitable to be sequestrated in the shallower formations,i.e.,500-1500 m,whereas CO2with H2S impurity should be settled in the deeper reservoirs.

关键词： Adsorption behavior CO 2 /H 2 S binary mixtures Molecular perspective Calcite slit nanopores CO 2 sequestration

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Rock physical characteristics of deep dolomite under complex geological conditions: A case study of 4th Member of Sinian Dengying Formation in the Sichuan Basin, China

引用

petroleum Science 2024年第4期21卷 2370-2382页

作者： Chuang Li Shu-Xin Pan Hong-Bin Wang Ji-Xin Deng Jian-Guo Zhao Zhi Li Yu Zhang Northwest Branch of Research institute of petroleum Exploration & Development Department of Geophysics and Exploration College of Geophysics Chengdu University of Technology State Key Laboratory of petroleum Resources and Engineering China University of Petroleum (Beijing)

The deep-ultra deep carbonate reservoir in China, commonly subjected to modification of multi-stage diagenesis, has extremely high heterogeneity. Conventional rock physics analysis cannot accurately identify the elastic responses of reservoir. Here, the rock physics properties of the dolomite from the 4th Member of the Sinian Dengying Formation are experimentally measured, and the change law of rock physics characteristics is investigated within the framework of the diagenetic processes by the analysis of the elastic and petrologic characteristics, pore structure, and sedimentary environments. The results show that the differentiated diagenesis results in different pore structure characteristics and microtexture characteristics of the rock. The microbial dolomite of the algal mound-grain beach facies is subjected to the contemporaneous microbial dolomitization and seepage-reflux dolomitization, penecontemporaneous selective dissolution, burial dolomitization, and hydrothermal dolomitization. The resultant crystalline dolomite is found with one main type of the dolomite crystal contact boundaries,and the dissolution pore is extensive development. The siliceous, muddy, and limy dolomite of the interbeach sea environment mainly experiences the weak capillary concentration dolomitization, intensive mechanical compaction-induced densification, and burial dolomitization. Such crystalline dolomite is observed with four types of contact boundaries, namely the dolomite contact, clay contact, quartz contact, and calcite contact boundaries, and porosity mostly attributed to residual primary inter-granular or crystalline pores. The samples with the same crystal boundary condition have consistent correlations between the compressional-and shear-wave velocities, and between the compressional-wave velocity and the velocity ratio. Additionally, the variation of the acoustic velocity with effective pressure and the intensity of pore-scale fluid-related dispersion are controlled by t

关键词： Deep-ultra deep carbonate reservoirs Rock physics properties Dolomite Seismic elastic properties Micro-crack Pore structure types

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Numerical Analysis of Phase Change and Container Materials for Thermal Energy Storage in the Storage Tank of Solar Water Heating System

引用

Journal of Thermal Science 2024年第2期33卷 408-421页

作者： SINGH Shailendra ANAND Abhishek SHUKLA Amritanshu SHARMA Atul Non-Conventional Energy Laboratory Rajiv Gandhi Institute of Petroleum TechnologyJais Amethi229304India

This study evaluates the effectiveness of phase change materials(PCMs) inside a storage tank of warm water for solar water heating(SWH) system through the theoretical simulation based on the experimental model of *** et *** model is explained by five fundamental equations for the calculation of various parameters like the effectiveness of PCMs,the mass of hot water,total heat content,and duration of *** study simulated eleven PCMs to analyze their effectiveness like Sodium hydrogen phosphate dodecahydrate(SHPD),OM 37,N-Eicosane(NE),Lauric acid(LA),Paraffin wax(PW),OM 48,Paraffin wax C_(20-33)(PW-C20-33),Sodium acetate trihydrate(SAT),Palmitic acid(PA),Myristic acid(MA),and Stearic acid(SA).Among all PCMs,the SHPD has found the highest value of effectiveness factor of ***,it is the most recommended PCM for the storage tank of the SWH *** study also includes the melt fraction analysis of all enumerated PCMs corresponding to container materials of stainless steel,glass,aluminum mixed,tin,aluminum,and *** melt fraction analysis is performed by making a coding program in the FORTRAN programming *** the analysis,copper container material is found to have high melting rate for all PCMs so it is superior to other container materials.

关键词： theoretical model solar water heating system phase change material effectiveness factor melt fraction

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Intelligent responsive self-assembled micro-nanocapsules: Used to delay gel gelation time

引用

petroleum Science 2024年第4期21卷 2433-2443页

作者： Chuan-Hong Kang Ji-Xiang Guo Dong-Tao Fei Wyclif Kiyingi Unconventional petroleum Research institute China University of Petroleum

In the application of polymer gels to profile control and water shutoff,the gelation time will directly determine whether the gel can "go further" in the formation,but the most of the methods for delaying gel gelation time are complicated or have low *** is an urgent need for an effective method for delaying gel gelation time with intelligent *** by the slow-release effect of drug capsules,this paper uses the self-assembly effect of gas-phase hydrophobic SiO2in aqueous solution as a capsule to prepare an intelligent responsive self-assembled *** capsule slowly releases the cross-linking agent under the stimulation of external conditions such as temperature and pH value,thus delaying gel gelation *** the pH value is 2 and the concentration of gas-phase hydrophobic SiO2particles is 10%,the gelation time of the capsule gel system at 30,60,90,and 120℃ is12.5,13.2,15.2,and 21.1 times longer than that of the gel system without containing capsule,*** with other methods,the yield stress of the gel without containing capsules was 78 Pa,and the yield stress after the addition of capsules was 322 *** intelligent responsive self-assembled micronanocapsules prepared by gas-phase hydrophobic silica nanoparticles can not only delay the gel gelation time,but also increase the gel *** slow release of cross-linking agent from capsule provides an effective method for prolongating the gelation time of polymer gels.

关键词： Profile control and water shutoff Polymer gel Delayed gelation time Intelligent response Self-assembled Micro-nanocapsules

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Kriging-boosted CR modeling for prompt infill drilling optimization

引用

petroleum 2024年第1期10卷 39-48页

作者： Elizaveta S.Gladchenko Anna E.Gubanova Denis M.Orlov Dmitry A.Koroteev Skolkovo institute of Science and technology Russian Federation Digital petroleum LLC Russian Federation

The capacitance-resistance model(CRM) has been a useful physics-based tool for obtaining production forecasts for decades. However, the model's limitations make it difficult to work with real field cases,where a lot of various events happen. Such events often include new well commissioning(NWC). We introduce a workflow that combines CRM concepts and kriging into a single tool to handle these types of events during history matching. Moreover, it can be used for selecting a new well placement during infill drilling. To make the workflow even more versatile, an improved version of CRM was used. It takes into account wells shut-ins and performed workovers by additional adjustment of the model coefficients. By preliminary re-weighing and interpolating these coefficients using kriging, the coefficients for potential wells can be determined. The approach was validated using both synthetic and real datasets, from which the cases of putting new wells into operation were selected. The workflow allows a fast assessment of future well performance with a minimal set of reservoir data. This way, a lot of well placement scenarios can be considered, and the best ones could be chosen for more detailed studies.

关键词： Capacitance-resistance model (CRM) Field development optimization Infill drilling Interwell connectivity Kriging New well commissioning (NWC)

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Study of inter-well interference in shale gas reservoirs by a robust production data analysis method based on deconvolution

引用

petroleum Science 2024年第4期21卷 2502-2519页

作者： Wen-Chao Liu Cheng-Cheng Qiao Ping Wang Wen-Song Huang Xiang-Wen Kong Yu-Ping Sun He-Dong Sun Yue-Peng Jia School of Civil and Resource Engineering University of Science and Technology Beijing PetroChina Research institute of petroleum Exploration and Development

In order to overcome the defects that the analysis of multi-well typical curves of shale gas reservoirs is rarely applied to engineering, this study proposes a robust production data analysis method based on deconvolution, which is used for multi-well inter-well interference research. In this study, a multi-well conceptual trilinear seepage model for multi-stage fractured horizontal wells was established, and its Laplace solutions under two different outer boundary conditions were obtained. Then, an improved pressure deconvolution algorithm was used to normalize the scattered production data. Furthermore, the typical curve fitting was carried out using the production data and the seepage model solution. Finally,some reservoir parameters and fracturing parameters were interpreted, and the intensity of inter-well interference was compared. The effectiveness of the method was verified by analyzing the production dynamic data of six shale gas wells in Duvernay area. The results showed that the fitting effect of typical curves was greatly improved due to the mutual restriction between deconvolution calculation parameter debugging and seepage model parameter debugging. Besides, by using the morphological characteristics of the log-log typical curves and the time corresponding to the intersection point of the log-log typical curves of two models under different outer boundary conditions, the strength of the interference between wells on the same well platform was well judged. This work can provide a reference for the optimization of well spacing and hydraulic fracturing measures for shale gas wells.

关键词： Shale gas Inter-well interference Deconvolution Production data analysis Typical curves Multi-stage fractured horizontal well

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Production performance analysis of a continental shale oil reservoir in Bohai Bay basin

引用

petroleum 2024年第2期10卷 294-305页

作者： Quansheng Guan Changwei Chen Xiugang Pu Yonggang Wan Jing Xu Haiwei Zeng Chen Jia Huanhuan Gao Wei Yang Zesen Peng China University of petroleum Exploration & Development Research institute of Dagang Oilfield CNPC Unconventional petroleum Research institute China University of Petroleum

Due to the extremely low permeability of shale formations, the combination of horizontal well and volume fracturing has been proposed as an effective technique to improve the production of Dagang continental shale oil reservoirs. Based on the flow material balance method(FMB) and straight-line analysis(SLA) method, the stimulated reservoir volume(SRV) and drainage volume are determined to identify the flow regimes of the seepage mechanism of shale oil reservoirs. To resolve the challenges of multi-scaled flow regimes and bottom hole pressure(BHP) variation before and after pumping in shale oil wells, a multi-linear analytical flow model was established to predict the future production and the final expected ultimate recoverable oil(EURo) after fitting the historical production dynamics. Based on the results, it can be concluded that the flow regime of a shale oil well in production can be divided into two stages consisting of linear flow within SRV and composite flow from the un-stimulated area to *** effects of fracturing operation parameters, such as fracturing fluid volume and sand/liquid ratio, on shale oil productivity, are analyzed, and insightful suggestions are drawn for the future development of this pay zone.

关键词： Shale oil reservoirs Rate transient analysis Flow material balance Analytical multi-linear model Production performance

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Application status and prospect of ionic liquids in oilfield chemistry

引用

petroleum 2024年第1期10卷 11-18页

作者： Jinsheng Sun Zhuoyang Xiu Li Li Kaihe Lv Xianfa Zhang Zonglun Wang Zhiwen Dai Zhe Xu Ning Huang Jingping Liu School of petroleum Engineering China University of Petroleum (East China) CNPC Engineering technology R&D Company Limited Oil & Gas technology Research institute of Changqing Oilfield Company

The ionic liquid, as a new treatment agent, has been increasingly applied in oil fields due to its strong temperature resistance, good solubility and high surface activity. In this paper, we systematically discuss the action mechanism and application effect of ionic liquids in oilfield chemistry. Ionic liquids can inhibit shale hydration expansion and reduce fluid loss through adsorption and intercalation, inhibit the formation of natural gas hydrate through imidazole five-membered ring structure as a space barrier, reduce viscosity of heavy oil by breaking chemical bonds of heavy oil macromolecules and charge transfer,improve oil displacement efficiency by forming ions pairs with carboxyl groups in crude oil, demulsify by forming channels between dispersed water droplets, acidify the formation by reacting with water to produce acid, interacts with organic material through weak hydrogen bonds and extracts it from oilfield wastewater, desulphurize by inserting sulfide molecules into the “stack” structure and form liquid inclusion complex, inhibit corrosion by forming a protective film on the metal surface. Based on the above aspects, the development direction of ionic liquids is proposed. The application of ionic liquids in oilfield chemistry is still in its infancy. It is urgent to fully explore the application performance of ionic liquids in oilfield chemistry, which also provides theoretical and technical supports for efficient reservoir development.

关键词： Ionic liquids Oilfield chemistry Shale inhibitor Drilling fluid

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：