检索结果-南通市图书馆

Analysis of mechanical strengths of extreme line casing joint considering geometric, material, and contact nonlinearities

引用

petroleum Science 2024年第3期21卷 1992-2004页

作者： Ji-Yun Zhang Chi Peng Jian-Hong Fu Quan Cao Yu Su Jian-Yun Pang Zi-Qiang Yu petroleum engineering School Southwest Petroleum UniversityChengdu610500SichuanChina engineering technology Research institute of CNPC southwest Oil and Gas Field Company Chengdu610017SichuanChina

To address the challenges associated with difficult casing running,limited annular space,and poor cementing quality in the completion of ultra-deep wells,the extreme line casing offers an effective solution over conventional ***,due to its smaller size,the joint strength of extreme line casing is reduced,which may cause failure when running in the *** address this issue,this study focuses on the CST-ZTΦ139.7 mm×7.72 mm extreme line casing and employs the elastic-plastic mechanics to establish a comprehensive analysis of the casing joint,taking into account the influence of geometric and material nonlinearities.A finite element model is developed to analyze the forces and deformations of the extreme line casing joint under axial tension and external collapse *** model investigates the stress distribution of each thread tooth subjected to various tensile forces and external ***,the tensile strength and crushing strength of the extreme line casing joint are determined through both analytical and experimental *** findings reveal that,under axial tensile load,the bearing surface of each thread tooth experiences uneven stress,with relatively high equivalent stress at the root of each thread *** end thread teeth are valuable spots for *** is observed that the critical fracture axial load of thread decreases linearly with the increase of thread tooth *** external pressure,the circumferential stress is highest at the small end of the external thread,leading to yield *** tensile strength of the joint obtained from the finite element model exhibits a relative error of less than 7%compared to the analytical and experimental values,proving the reliability of the finite element *** tensile strength of the joint is 3091.9 k ***,in terms of anti-collapse capability,the joints demonstrate higher resistance to collapse compared to the casing body,which is consistent with the test resul

关键词： Extreme line casing Elastic-plastic mechanics Finite element analysis Tensile strength Collapse strength

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Rock physical characteristics of deep dolomite under complex geological conditions: A case study of 4th Member of Sinian Dengying Formation in the Sichuan Basin, China

引用

petroleum Science 2024年第4期21卷 2370-2382页

作者： Chuang Li Shu-Xin Pan Hong-Bin Wang Ji-Xin Deng Jian-Guo Zhao Zhi Li Yu Zhang Northwest branch of Research institute of petroleum Exploration & Development Department of Geophysics and Exploration College of Geophysics Chengdu University of Technology State Key Laboratory of petroleum Resources and engineering China University of Petroleum (Beijing)

The deep-ultra deep carbonate reservoir in China, commonly subjected to modification of multi-stage diagenesis, has extremely high heterogeneity. Conventional rock physics analysis cannot accurately identify the elastic responses of reservoir. Here, the rock physics properties of the dolomite from the 4th Member of the Sinian Dengying Formation are experimentally measured, and the change law of rock physics characteristics is investigated within the framework of the diagenetic processes by the analysis of the elastic and petrologic characteristics, pore structure, and sedimentary environments. The results show that the differentiated diagenesis results in different pore structure characteristics and microtexture characteristics of the rock. The microbial dolomite of the algal mound-grain beach facies is subjected to the contemporaneous microbial dolomitization and seepage-reflux dolomitization, penecontemporaneous selective dissolution, burial dolomitization, and hydrothermal dolomitization. The resultant crystalline dolomite is found with one main type of the dolomite crystal contact boundaries,and the dissolution pore is extensive development. The siliceous, muddy, and limy dolomite of the interbeach sea environment mainly experiences the weak capillary concentration dolomitization, intensive mechanical compaction-induced densification, and burial dolomitization. Such crystalline dolomite is observed with four types of contact boundaries, namely the dolomite contact, clay contact, quartz contact, and calcite contact boundaries, and porosity mostly attributed to residual primary inter-granular or crystalline pores. The samples with the same crystal boundary condition have consistent correlations between the compressional-and shear-wave velocities, and between the compressional-wave velocity and the velocity ratio. Additionally, the variation of the acoustic velocity with effective pressure and the intensity of pore-scale fluid-related dispersion are controlled by t

关键词： Deep-ultra deep carbonate reservoirs Rock physics properties Dolomite Seismic elastic properties Micro-crack Pore structure types

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Adaptation analysis and fusion correction method of CMIP6 precipitation simulation data on the Qinghai-Tibetan Plateau

引用

Journal of Mountain Science 2024年第2期21卷 555-573页

作者： PENG Hao QIN Dahui WANG Zegen ZHANG Menghan YANG Yanmei YONG Zhiwei School of Civil engineering and Geomatics Southwest Petroleum UniversityChengdu 610500China School of Geoscience and technology Southwest Petroleum UniversityChengdu 610500China

In order to obtain more accurate precipitation data and better simulate the precipitation on the Tibetan Plateau,the simulation capability of 14 Coupled Model Intercomparison Project Phase 6(CMIP6)models of historical precipitation(1982-2014)on the Qinghai-Tibetan Plateau was evaluated in this *** indicate that all models exhibit an overestimation of precipitation through the analysis of the Taylor index,temporal and spatial statistical *** correct the overestimation,a fusion correction method combining the Backpropagation Neural Network Correction(BP)and Quantum Mapping(QM)correction,named BQ method,was *** this method,the historical precipitation of each model was corrected in space and time,*** correction results were then analyzed in time,space,and analysis of variance(ANOVA)with those corrected by the BP and QM methods,***,the fusion correction method results for each model were compared with the Climatic Research Unit(CRU)data for significance analysis to obtain the trends of precipitation increase and decrease for each *** results show that the IPSL-CM6A-LR model is relatively good in simulating historical precipitation on the Qinghai-Tibetan Plateau(R=0.7,RSME=0.15)among the uncorrected *** terms of time,the total precipitation corrected by the fusion method has the same interannual trend and the closest precipitation values to the CRU data;In terms of space,the annual average precipitation corrected by the fusion method has the smallest difference with the CRU data,and the total historical annual average precipitation is not significantly different from the CRU data,which is better than BP and ***,the correction effect of the fusion method on the historical precipitation of each model is better than that of the QM and BP *** precipitation in the central and northeastern parts of the plateau shows a significant increasing *** correlation coefficients between monthly

关键词： GCM CMIP6 Precipitation correction BP-QM fusion correction Spatio-temporal characteristics

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Vibration Control of A Flexible Marine Riser System Subject to Input Dead Zone and Extraneous Disturbances

引用

China Ocean engineering 2024年第2期38卷 271-284页

作者： ZHOU Li WANG Guo-rong WAN Min School of Mechatronic engineering Southwest Petroleum UniversityChengdu 610500China Energy Equipment institute Southwest Petroleum UniversityChengdu 610500China National Key Laboratory of Oil and Gas Reservoir Geology and Exploitation Southwest Petroleum UniversityChengdu 610500China

An observer-based adaptive backstepping boundary control is proposed for vibration control of flexible offshore riser systems with unknown nonlinear input dead zone and uncertain environmental *** control algorithm can update the control law online through real-time data to make the controller adapt to the environment and improve the control ***,based on the adaptive backstepping framework,virtual control laws and Lyapunov functions are designed for each *** direction interference observers are designed to track the timevarying boundary *** this basis,the inverse of the dead zone and linear state transformation are used to compensate for the original system and eliminate the adverse effects of the dead *** addition,the stability of the closed-loop system is proven by Lyapunov stability *** the system states are bounded,and the vibration offset of the riser converges to a small area of the initial ***,four examples of flexible marine risers are simulated in MATLAB to verify the effectiveness of the proposed controller.

关键词： adaptive backstepping control disturbance observer flexible marine riser input dead zone vibration control

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

An optimal flow rate allocation model of the oilfield treated oil pipeline network

引用

petroleum 2024年第1期10卷 93-100页

作者： Hai Li Tianyou Fan Kun Wang Xueyuan Long Yu He Meng Wang Wen Cheng Qian Huang Huirong Huang Weichao Yu PetroChina southwest Oil & Gasfield Company China petroleum Planning & engineering institute School of petroleum engineering Chongqing University of Science and Technology PipeChina Oil & Gas Control Center

Oilfield treated oil pipeline network is the link connecting the upstream oilfields and the downstream refineries. Due to the differences in operating costs and transportation fee between different pipelines and the fluctuation in the demand and sales prices of the treated oil, there is an optimal flow allocation plan for the pipeline network to make the oilfield company obtain the highest social and economic benefit. In this study, a mixed integer nonlinear programming(MINLP) model is developed to determine the optimal flow rate allocation plan of the large-scale and complex treated oil pipeline network, and both the social and economic benefits are considered simultaneously. The optimization objective is the multi-objective which includes the largest user satisfaction and the highest economic benefit. The model constraints include the oilfield production capacity, refinery demand, pipeline transmission capacity,flow, pressure, and temperature of the node and station, and the pipeline hydraulic and thermal calculations. Python 3.7 is utilized for the programming of the off-line calculation procedure and the MINLP model, and GUROBI 9.0.2 is served as the MINLP solver. Moreover, the model is applied to a real treated oil pipeline network located in China, and three optimization scenarios are analyzed. For social benefit,the values of the user satisfaction of each refinery and the total network are 1 before and after optimization for scenarios 1, 2, and 3. For economic benefit, the annual revenue can be increased by 0.227,0.293, and 0.548 billion yuan after the optimization in scenario 1, 2, and 3, respectively.

关键词： Treated oil pipeline network Flow rate allocation Optimal User satisfaction Economic benefit

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Time-dependent model for two-phase flow in ultra-high water-cut reservoirs: Time-varying permeability and relative permeability

引用

petroleum Science 2024年第4期21卷 2536-2553页

作者： Shao-Chun Wang Na Zhang Zhi-Hao Tang Xue-Fei Zou Qian Sun Wei Liu College of Energy Resources Chengdu University of Technology College of petroleum engineering Shandong Institute of Petroleum and Chemical Technology

For the ultra-high water-cut reservoirs, after long-term water injection exploitation, the physical properties of the reservoir change and the heterogeneity of the reservoir becomes increasingly severe, which further aggravates the spatial difference of the flow field. In this study, the displacement experiments were employed to investigate the variations in core permeability, porosity, and relative permeability after a large amount of water injection. A relative permeability endpoint model was proposed by utilizing the alternating conditional expectation(ACE) transformation to describe the variation in relative permeability based on the experimental data. Based on the time dependent models for permeability and relative permeability, the traditional oil-water two-phase model was improved and discretized using the mimetic finite difference method(MFD). The two cases were launched to confirm the validation of the proposed model. The impact of time-varying physical features on reservoir production performance was studied in a real water flooding reservoir. The experimental results indicate that the overall relative permeability curve shifts to the right as water injection increases. This shift corresponds to a transition towards a more hydrophilic wettability and a decrease in residual oil saturation. The endpoint model demonstrates excellent accuracy and can be applied to time-varying simulations of reservoir physics. The impact of variations in permeability and relative permeability on the reservoir production performance yields two distinct outcomes. The time-varying permeability of the reservoir results in intensified water channeling and poor development effects. On the other hand, the time-varying relative permeability enhances the oil phase seepage capacity, facilitating oil displacement. The comprehensive time-varying behavior is the result of the combined influence of these two parameters, which closely resemble the actual conditions observed in oil field expl

关键词： Mimetic finite difference Water flooding reservoir Time-varying physical properties Numerical simulation

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Investigation of pore structure alteration and permeability enhancement of shale matrix by supercritical water treatment after hydraulic fracturing

引用

petroleum 2024年第2期10卷 265-274页

作者： Yili Kang Peisong Li Wangkun Cao Mingjun Chen Lijun You Jiang Liu Zhehan Lai State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation Southwest Petroleum University institute of engineering technology PetroChina Coalbed Methane Company Limited Chemical and petroleum engineering University of Calgary

Shale gas reservoirs are unconventional tight gas reservoirs, in which horizontal wells and hydraulic fracturing are required to achieve commercial development. The fracture networks created by hydraulic fracturing can increase the drainage area extensively to enhance shale gas recovery. However, large volumes of fracturing fluid that is difficult to flow back to the surface and remained in the shale formation, will inevitably lead to damages of the shale formations and limit the effectiveness of *** water(SCW) treatment after hydraulic fracturing is a new method to enhance shale gas recovery by using appropriate heat treatment methods to the specific formation to convert the retained fracturing fluid into a supercritical state(at temperatures in excess of 373.946°C and pressures in excess of 22.064 MPa). An experiment was conducted to simulate the reaction between shale and SCW, and the capacity of SCW treatment to enhance the permeability of the shale was evaluated by measuring the response of the shale porosity and permeability on SCW treatment. The experimental results show that the shale porosity and permeability increase by 213.43% and 2198.37%, respectively. The pore structure alteration and permeability enhancement of the shale matrix were determined by analyzing the changes in pore structure and mineral composition after SCW treatment. The mechanisms that affect pore structure and mineral composition include oxidative catalysis decomposition of organic matters and reducing minerals, acid-catalyzed decomposition of carbonate minerals and feldspar minerals, hydrothermal catalysis induced fracture extension and cementation weakening induced fracture *** treatment converts harm into a benefit by reducing the intrusion of harmful substances into the shale formation, which will broaden the scope and scale of shale formation stimulation.

关键词： Shale gas Formation damage control Formation heat treatment Supercritical water

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Effects of conductive agent type on lithium extraction from salt lake brine with LiFePO_(4) electrodes

引用

International Journal of Minerals,Metallurgy and Materials 2024年第4期31卷 678-687页

作者： Zhen Zhang Pan Luo Yan Zhang Yuhan Wang Li Liao Bo Yu Mingshan Wang Junchen Chen Bingshu Guo Xing Li School of New Energy and Materials Southwest Petroleum UniversityChengdu 610500China Energy Storage Research institute Southwest Petroleum UniversityChengdu 610500China

Electrochemical lithium extraction from salt lakes is an effective strategy for obtaining lithium at a low ***,the elevated Mg:Li ratio and the presence of numerous coexisting ions in salt lake brines give rise to challenges,such as prolonged lithium extraction periods,diminished lithium extraction efficiency,and considerable environmental *** this work,Li FePO4(LFP)served as the electrode material for electrochemical lithium *** conductive network in the LFP electrode was optimized by adjusting the type of conductive *** approach resulted in high lithium extraction efficiency and extended cycle *** the single conductive agent of acetylene black(AB)or multiwalled carbon nanotubes(MWCNTs)was replaced with the mixed conductive agent of AB/MWCNTs,the average diffusion coefficient of Li+in the electrode increased from 2.35×10^(-9)or 1.77×10^(-9)to 4.21×10^(-9)cm^(2)·s^(-1).At the current density of 20 mA·g^(-1),the average lithium extraction capacity per gram of LFP electrode increased from 30.36 mg with the single conductive agent(AB)to 35.62 mg with the mixed conductive agent(AB/MWCNTs).When the mixed conductive agent was used,the capacity retention of the electrode after 30 cycles reached 82.9%,which was considerably higher than the capacity retention of 65.8%obtained when the single AB was ***,the electrode with mixed conductive agent of AB/MWCNTs provided good cycling *** the conductive agent content decreased or the loading capacity increased,the electrode containing the mixed conductive agent continued to show excellent electrochemical ***,a self-designed,highly efficient,continuous lithium extraction device was *** electrode utilizing the AB/MWCNT mixed conductive agent maintained excellent adsorption capacity and cycling performance in this *** work provides a new perspective for the electrochemical extraction of lithium using LFP electrodes.

关键词： salt lake brine lithium extraction electrochemical lithium extraction conductive agent extraction efficiency adsorption capacity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Molecular insights into oil detachment from hydrophobic quartz surfaces in clay-hosted nanopores during steam-surfactant co-injection

引用

petroleum Science 2024年第4期21卷 2457-2468页

作者： Ben-Jie-Ming Liu Xuan-Tong Lei Mohammadali Ahmadi Zhangxin Chen Department of Chemical and petroleum engineering University of Calgary Eastern institute of technology

Thermal recovery techniques for producing oil sands have substantial environmental impacts. Surfactants can efficiently improve thermal bitumen recovery and reduce the required amount of steam. Such a technique requires solid knowledge about the interaction mechanism between surfactants, bitumen,water, and rock at the nanoscale level. In particular, oil sands ores have extremely complex mineralogy as they contain many clay minerals(montmorillonite, illite, kaolinite). In this study, molecular dynamics simulation is carried out to elucidate the unclear mechanisms of clay minerals contributing to the bitumen recovery under a steam-anionic surfactant co-injection process. We found that the clay content significantly influenced an oil detachment process from hydrophobic quartz surfaces. Results reveal that the presence of montmorillonite, illite, and the siloxane surface of kaolinite in nanopores can enhance the oil detachment process from the hydrophobic surfaces because surfactant molecules have a stronger tendency to interact with bitumen and quartz. Conversely, the gibbsite surfaces of kaolinite curb the oil detachment process. Through interaction energy analysis, the siloxane surfaces of kaolinite result in the most straightforward oil detachment process. In addition, we found that the clay type presented in nanopores affected the wettability of the quartz surfaces. The quartz surfaces associated with the gibbsite surfaces of kaolinite show the strongest hydrophilicity. By comparing previous experimental findings with the results of molecular dynamics(MD) simulations, we observed consistent wetting characteristics. This alignment serves to validate the reliability of the simulation outcomes. The outcome of this paper makes up for the lack of knowledge of a surfactant-assisted bitumen recovery process and provides insights for further in-situ bitumen production engineering designs.

关键词： Clay minerals Bitumen Contact angle Interaction energy Surfactant Molecular dynamics

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Dynamic response of buildings under debris flow impact

引用

Journal of Mountain Science 2024年第5期21卷 1581-1597页

作者： LIU Huan FAN Xiaoyi TIAN Shujun DENG Xin School of Mechanical and Electrical engineering Southwest Petroleum UniversityChengdu 610500China School of Civil engineering and Geomatics Southwest Petroleum UniversityChengdu 610500China Housing and Urban-Rural Development Bureau of Mingshan District Ya’an 625100China engineering Safety Assessment and Protection Research Southwest Petroleum UniversityChengdu 610500China School of Civil engineering and Architecture Southwest University of Science and TechnologyMianyang 621010China

This study employs the smoothed particle hydrodynamics–finite element method(SPH–FEM) coupling numerical method to investigate the impact of debris flow on reinforced concrete(RC)-frame buildings. The methodology considers the variables of debris flow depth and velocity and introduces the intensity index IDV(IDV = DV) to evaluate three different levels of debris flow impact intensity. The primary focus of this study is to investigate the dynamic response and failure mechanism of RC-frame buildings under debris flow impact, including structural failure patterns, impact force and column displacement. The results show that under a highintensity impact, a gradual collapse process of the RCframe building can be observed, and the damage mode of the frame column reflects shear failure or plastic hinge failure mechanism. First, the longitudinal infill walls are damaged owing to their low out-of-plane flexural capacity;the critical failure intensity index IDV value is approximately 7.5 m2/s. The structure cannot withstand debris flows with an intensity index IDV greater than 16 m2/s, and it is recommended that the peak impact force should not exceed 2100 k N. The impact damage ability of debris flow on buildings mostly originates from the impact force of the frontal debris flow, with the impact force of the debris flow body being approximately 42% lower than that of the debris flow head. Finally, a five-level classification system for evaluating the damage status of buildings is proposed based on the numerical simulation and investigation results of the disaster site.

关键词： SPH–FEM method Debris flow Buildings The intensity index Dynamic response

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：