检索结果-南通市图书馆

Absorption mechanism of SO_(3)on various alkaline absorbents in the presence of SO_(2)

Journal of Environmental Sciences 2025年第3期149卷 268-277页

作者： Junxiang Guo Jin Xiong Yuran Li Jirigele Qinggele Tingyu Zhu Shougang Group Research Institute of Technology Beijing 100043China Beijing Key Laboratory of Green Recyclable process for Iron&Steel Production Technology Beijing 100043China CAS Key Laboratory of Green process and engineering Institute of Process EngineeringInnovation Academy for Green ManufactureChinese Academy of SciencesBeijing 100190China WISDRI City Environment Protection engineering Limited Company Wuhan 430205China

Sulfur trioxide(SO_(3))as a condensable particle matter has a significant influence on atmospheric visibility,which easily arouses formation of *** is imperative to control the SO_(3)emission from the industrial flue *** commonly used basic absorbents,including Ca(OH)_(2),MgO and NaHCO_(3)were selected to explore the effects of temperature,SO_(2)concentration on the SO_(3)absorption,and the reaction mechanism of SO_(3)absorption was further *** suitable reaction temperature for various absorbents were proposed,Ca(OH)_(2)at the high temperatures above 500°C,MgO at the low temperatures below 320°C,and NaHCO_(3)at the temperature range of 320–500°*** competitive absorption between SO_(2)and SO_(3)was found that the addition of SO_(2)reduced the SO_(3)absorption on Ca(OH)_(2)and NaHCO_(3),while had no effect on *** order of the absorption selectivity of SO_(3)follows MgO,NaHCO_(3)and Ca(OH)_(2)under the given conditions in this *** absorption process of SO_(3)on NaHCO_(3)follows the shrinking core model,thus the absorption reaction continues until NaHCO_(3)was exhausted with the utilization rate of nearly 100%.The absorption process of SO_(3)on Ca(OH)_(2)and MgO follows the grain model,and the dense product layer hinders the further absorption reaction,resulting in low utilization of about 50%for Ca(OH)_(2)and *** research provides a favorable support for the selection of alkaline absorbent for SO_(3)removal in application.

关键词： Alkali absorbent Sulfur trioxide Selectivity Shrinking core model Grain model

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Dynamic event-triggered data-driven iterative learning bipartite tracking control for nonlinear MASs with prescribed performance

引用

Science China(Information Sciences) 2025年第1期68卷 292-305页

作者： Tao SHI Wei-Wei CHE School of Mechatronic engineering and Automation Shanghai University State Key Laboratory of Synthetical Automation for process Industries Northeastern University College of Information Science and engineering Northeastern University

This article proposes a distributed dynamic event-triggered data-driven iterative learning control(DET-DDILC)scheme under a predefined performance to tackle the bipartite tracking control problem for multiagent systems(MASs). An improved dynamic linearization technique is utilized to convert the nonlinear MASs into an iterative linear data model. First,a peer-to-peer mapping function is introduced to map the constrained distributed system output homeomorphism to an unconstrained one. In addition, a DET mechanism based on a time-iteration-varying function is devised to conserve network communication resources. Based on the unconstrained transformation and the designed DET mechanism, the DET-DDILC algorithm is devised to ensure that the bipartite tracking performance of MASs can be within the preset range. Finally, the effectiveness and feasibility of the designed control scheme are demonstrated via a simulation case by a comparison.

关键词： bipartite tracking control prescribed performance event-triggered iterative learning control multiagent systems

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

A brief review of preparation and applications of monolithic aerogels in atmospheric environmental purification

引用

Journal of Environmental Sciences 2025年第3期149卷 209-220页

作者： Linfeng Nie Shuangde Li Mengjie Cao Ning Han Yunfa Chen State Key Laboratory of Multiphase Complex Systems Institute of Process EngineeringChinese Academy of SciencesBeijing 100190China Center of Materials Science and Optoelectronics engineering University of Chinese Academy of SciencesBeijing 100049China Key Laboratory of Science&Technology on Particle Materials Institute of Process EngineeringChinese Academy of SciencesBeijing 100190China

Monolithic aerogels are promising candidates for use in atmospheric environmental purification due to their structural advantages,such as fine building block size together with high specific surface area,abundant pore structure,***,monolithic aerogels possess a unique monolithic macrostructure that sets them apart from aerogel powders and nanoparticles in practical environmental clean-up *** review delves into the available synthesis strategies and atmospheric environmental applications of monolithic aerogels,covering types of monolithic aerogels including SiO_(2),graphene,metal oxides and their combinations,along with their preparation *** particular,recent developments for VOC adsorption,CO_(2)capture,catalytic oxidation of VOCs and catalytic reduction of CO_(2)are ***,challenges and future opportunities for monolithic aerogels in the atmospheric environmental purification field are *** reviewprovides valuable insights for designing and utilizing monolithic aerogel-based functional materials.

关键词： Monolithic aerogel Environmental purification Catalysis Adsorption

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Adsorption removal of mercury from flue gas by metal selenide:A review

引用

Journal of Environmental Sciences 2025年第2期148卷 420-436页

作者： Yang Zheng Guoliang Li Yi Xing Wenqing Xu Tao Yue School of Energy and Environmental engineering University of Science and Technology BeijingBeijing 100083China State Key Laboratory of Advanced Metallurgy University of Science and Technology BeijingBeijing 100083China CAS Key Laboratory of Green process and engineering Institute of Process EngineeringInnovation Academy for Green ManufactureChinese Academy of SciencesBeijing 100190China

Mercury(Hg)pollution has been a global concern in recent decades,posing a significant threat to entire ecosystems and human health due to its cumulative toxicity,persistence,and transport in the *** intense interaction between mercury and selenium has opened up a new field for studying mercury removal from industrial flue gas *** the advantages of good Hg0 capture performance and lowsecondary pollution of the mineral selenium compounds,the most noteworthy is the relatively low regeneration temperature,allowing adsorbent regeneration with low energy consumption,thus reducing the utilization cost and enabling recovery of mercury *** paper reviews the recent progress of mineral selenium compounds in flue gas mercury removal,introduces in detail the different types ofmineral selenium compounds studied in the field ofmercury removal,reviews the adsorption performance of various mineral selenium compounds adsorbents on mercury and the influence of flue gas components,such as reaction temperature,air velocity,and other factors,and summarizes the adsorption mechanism of different fugitive forms of selenium *** on the current research progress,future studies should focus on the economic performance and the performance of different carriers and sizes of adsorbents for the removal of Hg0 and the correlation between the gas-particle flow characteristics and gas phase mass transfer with the performance of Hg0 removal in practical industrial *** addition,it remains a challenge to distinguish the oxidation and adsorption of Hg0 quantitatively.

关键词： Non-conventional pollutants Adsorbents Metal selenides Flue gas Mercury removal

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Overview of in-situ oxygen production technologies for lunar resources

引用

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 233-255页

作者： Youpeng Xu Sheng Pang Liangwei Cong Guoyu Qian Dong Wang Laishi Li Yusheng Wu Zhi Wang College of Materials Science and engineering Shenyang University of TechnologyShenyang 110870China CAS Key Laboratory of Green process and engineering National Engineering Research Center for Green Recycling of Strategic Metal ResourcesInstitute of Process EngineeringChinese Academy of SciencesBeijing 100190China Innovation Academy for Green Manufacture Chinese Academy of SciencesBeijing 100190China School of Chemical engineering University of Chinese Academy of SciencesBeijing 100049China

The rich resources and unique environment of the Moon make it an ideal location for human expansion and the utilization of extraterrestrial ***,crucial for supporting human life on the Moon,can be extracted from lunar regolith,which is highly rich in oxygen and contains polymetallic *** oxygen and metal extraction can be achieved using existing metallurgical ***,the ample reserves of water ice on the Moon offer another means for oxygen *** paper offers a detailed overview of the leading technologies for achieving oxygen production on the Moon,drawing from an analysis of lunar resources and environmental *** delves into the principles,processes,advantages,and drawbacks of water-ice electrolysis,two-step oxygen production from lunar regolith,and one-step oxygen production from lunar *** two-step methods involve hydrogen reduction,carbothermal reduction,and hydrometallurgy,while the one-step methods encompass fluorination/chlorination,high-temperature decomposition,molten salt electrolysis,and molten regolith electrolysis(MOE).Following a thorough comparison of raw materials,equipment,technology,and economic viability,MOE is identified as the most promising approach for future in-situ oxygen production on the *** the corrosion characteristics of molten lunar regolith at high temperatures,along with the Moon's low-gravity environment,the development of inexpensive and stable inert anodes and electrolysis devices that can easily collect oxygen is critical for promoting MOE technology on the *** review significantly contributes to our understanding of in-situ oxygen production technologies on the Moon and supports upcoming lunar exploration initiatives.

关键词： lunar resources in-situ oxygen production space metallurgy molten lunar regolith electrolysis

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Experimental Study of Selective Batch Bio-Adsorption for the Removal of Dyes in Industrial Textile Effluents

引用

Journal of Renewable Materials 2025年第1期13卷 127-146页

作者： Zakaria Laggoun Amel Khalfaoui Kerroum Derbal Amira Fadia Ghomrani Abderrezzaq Benalia Antonio Pizzi Laboratory of Environmental process engineering(LIPE) Department of Environmental EngineeringFaculty of Engineering ProcessUniversity Salah Boubnider-Constantine 3New City Ali MendjeliConstantine25000Algeria Laboratory of process engineering for Sustainable Development and Health Products(GPDDPS) Department of Process EngineeringNational Polytechnic School of ConstantineConstantine25000Algeria Physics of Matter and Radiation Laboratory(LPMR) Department of Process EngineeringFaculty of Science and TechnologyUniversity Mohamed Cherif MessaadiaSouk Ahras41000Algeria Higher Normal School of Constantine Ali Mendjeli Nouvelle VilleConstantine25000Algeria Laboratoire d’Etude et Recherche sur le Matériau Bois(LERMAB) Ecole Nationale Supérieure des Technologies et Industries du Bois(ENSTIB)University of LorraineEpinal88000France

This research aims to study the bio-adsorption process of two dyes,Cibacron Green H3G(CG-H3G)and Terasil Red(TR),in a single system and to bring them closer to the industrial textile discharge by a binary mixture of two dyes(TR+CG-H3G).The Cockle Shell(CS)was used as a natural *** characterizations of CS were investigated by Fourier transform infrared(FTIR),X-ray diffraction(XRD),scanning electron microscopy(SEM),energy-dispersive X-ray spectroscopy(EDX)and Brunauer–Emmett–Teller(BET).The adsorption potential of Cockle Shells was tested in two cases(single and binary system)and determined by:contact time(0–60 min),bio-adsorption dose(3–15 g/L),initial concentration(10–300 mg/L),temperature(22–61°C)and pH solution(2–12).The study of bio-adsorption(equilibrium and kinetics)was conducted at 22°*** kinetic studies demon-strated that a pseudo-second-order adsorption mechanism had a good correlation coefﬁcient(R2≥0.999).The Langmuir isotherm modeling provided a well-deﬁned description of TR and CG-H3G bio-adsorption on cockle shells,exhibiting maximum capacities of 29.41 and 3.69 mg/g respectively at 22°*** thermodynamic study shows that the reaction between the TR,CG-H3G dyes molecules and the bio-adsorbent is exothermic,spontaneous in the range of 22–31°C with the aleatory character decrease at the solid-liquid *** study of selectivity in single and binary systems has been performed under optimal operating conditions using the industrial textile rejection pH(pH=6.04).CG-H3G dye is found to have a higher selectivity than TR in single(0–60 min)and binary systems with a range of 6–45 min,as shown by the selectivity *** was discovered that CS has the capability to remove both CG-H3G and TR dyes in both simple and binary systems,making it a superior bio-adsorbent.

关键词： Cockle shells bio-adsorption binary system dyes cibacron green terasil red selectivity

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Structure-phase transformation of bismuth oxide to Ta-Bi_(24)O_(31)Cl_(10)shoulder-by-shoulder heterojunctions for efficient photocatalytic removal of antibiotic

引用

Journal of Environmental Sciences 2025年第3期149卷 149-163页

作者： Man Yang Zhenzhen Shi Shaodong Sun Bian Yang Jie Cui Jianing Li Daqin Yun Nian Lei engineering Research Center of Conducting Materials and Composite Technology Ministry of EducationShaanxi Engineering Research Center of Metal-Based Heterogeneous Materials and Advanced Manufacturing TechnologyShaanxi Province Key Laboratory for Electrical Materials and Infiltration TechnologySchool of Materials Science and EngineeringXi’an University of TechnologyXi’an 710048China College of Energy Xiamen UniversityXiamen 361005China Beijing Key Laboratory of Ionic Liquids Clean process Institute of Process EngineeringChinese Academy of SciencesBeijing 100190China

Developing heterojunction photocatalyst with well-matched interfaces andmultiple charge transfer paths is vital to boost carrier separation efficiency for photocatalytic antibiotics removal,but still remains a great *** present work,a new strategy of chloride anion intercalation in Bi_(2)O_(3)via one-pot hydrothermal process is *** as-prepared Ta-BiOCl/Bi_(24)O_(31)Cl_(10)(TBB)heterojunctions are featured with Ta-Bi_(24)O_(31)Cl_(10)and Ta-BiOCl lined shoulder-by-shouleder via semi-coherent *** this TBB heterojunctions,the well-matched semi-coherent interfaces and shoulder-by-shoulder structures provide fast electron transfer andmultiple transfer paths,respectively,leading to enhanced visible light response and improved photogenerated charge ***,a type-II heterojunction for photocharge separation has been obtained,in which photogenerated electrons are drove from the CB(conduction band)of Ta-Bi_(24)O_(31)Cl_(10)to the both of bilateral empty CB of Ta-BiOCl and gathered on the CB of Ta-BiOCl,while the photogenerated holes are left on the VB(valence band)of Ta-Bi_(24)O_(31)Cl_(10),effectively hindering the recombination of photogenerated electron-hole ***,the separated electrons can effectively activate dissolved oxygen for the generation of reactive oxygen species(·O_(2)^(−)).Such TBB heterojunctions exhibit remarkably superior photocatalytic degradation activity for tetracycline hydrochloride(TCH)solution to Bi_(2)O_(3),Ta-BiOCl and Ta-Bi_(24)O_(31)Cl_(10).This work not only proposes a Ta-BiOCl/Bi_(24)O_(31)Cl_(10)shoulder-by-shoulder micro-ribbon architectures with semi-coherent interfaces and successive type-Ⅱheterojunction for highly efficient photocatalytic activity,but offers a new insight into the design of highly efficient heterojunction through phasestructure synergistic transformation strategy.

关键词： Heterojunction Bismuth oxide Charge separation/transfer Photocatalytic degradation Catalytic mechanism

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Pilot-scale testing on catalytic hydrolysis of carbonyl sulfur combined with absorption-oxidation of H_(2)S for blast furnace gas purification

引用

Journal of Environmental Sciences 2025年第5期151卷 360-372页

作者： Yuting Lin Yuran Li Bin Wang Jinglei Tian Hongqiang Liu Yiren Li Zhicheng Xu Qiang Cao Tingyu Zhu CAS Key Laboratory of Green process and engineering Institute of Process EngineeringInnovation Academy for Green ManufactureChinese Academy of SciencesBeijing 100190China University of Chinese Academy of Sciences Beijing 100190China HBIS Group Co. Ltd.Shijiazhuang 050023China Center for Excellence in Regional Atmospheric Environment Institute of Urban EnvironmentChinese Academy of SciencesXiamen 361021China

About 70%of the flue gas in the iron-steel industry has achieved multi-pollutant ultra-low emissions in China until 2023,and then the blast furnace gas purification has become the control step and *** research group has designed and constructed the world’s first blast furnace gas desulfurization pilot plant with the scale of 2000 Nm^(3)/h in October *** pilot plant is a two-step combined desulfurization device including catalytic hydrolysis of carbonyl sulfur(COS)and absorption-oxidation of H_(2)S,continuously running for 120 *** the hydrolysis system,one reason for catalyst deactivation has been verified from the sulfur *** in blast furnace gas can be hydrolyzed on the hydrolysis catalyst to produce the nitrogen deposition,which is one of the reasons for catalyst deactivation and has never been found in previous *** deposition forms of S and N elements are determined,S element forms elemental sulfur and sulfate,while N element forms-NH_(2)and NH_(4)^(+).In the absorption-oxidation system,the O_(2)loading and the residence time have been optimized to control the oxidation of HS^(−)to produce elemental sulfur instead of by-product S_(2)O_(3)^(2−).The balance and distribution of S and N elements have been calculated for thewholemulti-phase system,approximately 84.4%of the sulfur is converted to solid sulfur product,about 1.3%of the sulfur and 19.2%of N element are deposited on the hydrolysis *** pilot plant provides technical support formulti-pollutant control of blast furnace.

关键词： Blast furnace gas Carbonyl sulfur Hydrogen sulfide Hydrogen cyanide Hydrolysis and oxidation Activated carbon

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Synthesis ofδ-MnO_(2)via ozonation routine for low temperature formaldehyde removal

引用

Journal of Environmental Sciences 2025年第1期147卷 642-651页

作者： Guijun Fan Yacong Guo Shaohua Chai Le Zhang Jian Guan Guojun Ma Ning Han Yunfa Chen State Key Laboratory of Multiphase Complex Systems Institute of Process EngineeringChinese Academy of SciencesBeijing 100190China College of Chemical engineering University of Chinese Academy of SciencesBeijing 100049China Key Laboratory of Science and Technology on Particle Materials Institute of Process EngineeringChinese Academy of SciencesBeijing 361021China Key Laboratory for Mechanics in Fluid Solid Coupling Systems Institute of MechanicsChinese Academy of SciencesBeijing 100190China School of Petrochemical engineering&Environment Zhejiang Ocean UniversityZhoushan 316022China

Nowadays,it is still a challenge to prepared high efficiency and low cost formaldehyde(HCHO)removal catalysts in order to tackle the long-living indoor air ***,δ-MnO_(2)is successfully synthesized by a facile ozonation strategy,where Mn^(2+)is oxidized by ozone(O_(3))bubble in an alkaline *** presents one of the best catalytic properties with a low 100%conversion temperature of 85℃for 50 ppm of HCHO under a GHSV of 48,000 mL/(g·hr).As a comparison,more than 6 times far longer oxidation time is needed if O3 is replaced by O_(2).Characterizations show that ozonation process generates a different intermediate of tetragonalβ-HMnO_(2),which would favor the quick transformation into the final productδ-MnO_(2),as compared with the relatively more thermodynamically stable monoclinicγ-HMnO_(2)in the O_(2)***,HCHO is found to be decomposed into CO_(2)via formate,dioxymethylene and carbonate species as identified by room temperature insitu diffuse reflectance infrared fourier transform *** these results show great potency of this facile ozonation routine for the highly activeδ-MnO_(2)synthesis in order to remove the HCHO contamination.

关键词： δ-MnO_(2) Ozone oxidation HCHO oxidation In-situ DRIFTS

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Density functional theory studies of Pt-based catalysts for CO oxidation

引用

Science China Technological Sciences 2025年第3期68卷 58-75页

作者： Xue LI Yang ZOU Yongqi ZHAO Xiaolong LIU Tingyu ZHU CAS Key Laboratory of Green process and engineering Institute of Process Engineering Chinese Academy of Sciences Key Laboratory of Green and High-value Utilization of Salt Lake Resources Chinese Academy of Sciences

CO is highly toxic and seriously harmful to human health, so it is meaningful to control CO emissions, especially from industrial plants. Catalytic oxidation is regarded to be an effective method for CO removal, in which Pt-based catalysts show excellent performance. Studies of catalytic CO oxidation employing Pt-based catalysts often encounter challenges such as CO poisoning, challenges in activating O2, significant temperature sensitivity, and inadequate tolerance to water and sulfur species. These experimental hurdles have been corroborated by density functional theory（DFT） computations, which model adsorption, reaction pathways, and electronic structures at catalyst surfaces. DFT analysis has elucidated the underlying mechanisms behind these limitations, laying the foundation for enhancing the efficacy of Pt-based catalysts within the scope of academic discourse. DFT has been used intensively in recent years to study the reaction mechanism and functioning characteristics of Pt-based catalysts in CO oxidation. Consequently, advancements in research on DFT experiments on Pt-based catalysts are described. This review provides a comprehensive overview and insights into the mechanism of CO adsorption on the surface of single-atom and multi-atom Pt-based catalysts, its effect on CO oxidation performance, and reaction pathways of CO oxidation in the hope of providing theoretical guidance for the structural design of most effective catalysts.

关键词： platinum catalytic oxidation carbon monoxide density functional theory

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：