检索结果-南通市图书馆

Cellulose nanofiber-coated delignified wood as an efficient filter for microplastic removal

Progress in Natural Science:Materials International 2024年第1期34卷 162-171页

作者： Xinyue Liu Mei-Chun Li Yang Lu Ziyan Li Chaozheng Liu Zhipeng Liu Changtong Mei Qinglin Wu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources College of Materials Science and Engineering Nanjing Forestry University School of Petroleum Engineering China University of Petroleum(East China) Key Laboratory of Unconventional Oil&Gas development(China University of Petroleum(East China)) Ministry of Education School of Renewable Natural Resources Louisiana State University Ag Center

Microplastics（MPs） are a new type of emerging pollutant in the aquatic environment that pose a tremendous risk to aquatic organisms and human health. Although many studies have focused on the removal of MPs, most of the materials used are non-renewable, non-degradable, and relatively costly. The development of green, renewable,and cost-effective materials for the removal of MPs presents a significant challenge. In this work, cellulose nanofiber-coated, delignified wood（CNF-CDW） was prepared and used as an efficient filter to remove MPs for the first time. Balsa wood chip was delignified through three approaches using NaClO2, Na2SO3/NaOH, and a deep eutectic solvent（DES） consisting of choline chloride/lactic acid. Delignified wood（DW） with desirable mechanical properties and a high pore structure was successfully prepared by optimizing the delignification method and reaction conditions. Subsequently, the CNF-CDW was prepared through immersion of DW in a suspension of cellulose nanofiber（CNF）, followed by crosslinking with CaCl2solutions. The effects of CNF concentration, CaCl2concentration, and wood chip thickness on the removal efficiency and flux of CNF-CDW towards polystyrene（PS）MPs were systematically studied. Under the optimal conditions of 0.5 wt% CNF, 1 mol/L CaCl2, and 10 mm in thickness, the CNF-CDW exhibited superior MPs removal performance, with a removal efficiency of 95.97% and a flux of 1146 L/m2·h. Morphological analysis revealed that CNF formed compact films on the surface DW, and MPs were efficiently blocked both on the surface and internal cellular structure of CNF-CDW. Therefore, with its exceptional filtration efficiency, high flux, and sustainable nature, CNF-CDW has a broad application prospect in the field of removing MPs from aquatic environment, promoting a brighter and cleaner future for aquatic ecosystems and human well-being.

关键词： Cellulose nanofiber Wood Microplastic Filter Filtration efficiency

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

A high-speed true random number generator based on ag/SiNx/n-Si memristor

引用

Frontiers of physics 2024年第1期19卷 241-250页

作者： Xiaobing Yan Zixuan Zhang Zhiyuan Guan Ziliang Fang Yinxing Zhang Jianhui Zhao Jiameng Sun Xu Han Jiangzhen Niu Lulu Wang Xiaotong Jia Yiduo Shao Zhen Zhao Zhenqiang Guo Bing Bai Institute of Life Science and Green development Key Laboratory of Brain-Like Neuromorphic Devices and Systems of Hebei ProvinceCollege of Electron and Information EngineeringHebei UniversityBaoding 071002China

The intrinsic variability of memristor switching behavior can be used as a natural source of randomness,this variability is valuable for safe applications in hardware,such as the true random number generator(TRNG).However,the speed of TRNG is still be further ***,we propose a reliable ag/SiNx/n-Si volatile memristor,which exhibits a typical threshold switching device with stable repeat ability and fast switching *** volatile-memristor-based TRNG is combined with nonlinear feedback shift register(NFSR)to form a new type of high-speed dual output ***,the bit generation rate reaches a high speed of 112 kb/*** addition,this new TRNG passed all 15 National Institute of Standards and Technology(NIST)randomness tests without post-processing steps,proving its performance as a hardware security *** work shows that the SiNx-based volatile memristor can realize TRNG and has great potential in hardware network security.

关键词： volatile memristor true random number generator(TRNG) delay time threshold switching device

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Improved Quantile Convolutional and Recurrent Neural Networks for Electric Vehicle Battery Temperature Prediction

引用

Big Data Mining and Analytics 2024年第2期7卷 512-530页

作者： Andreas M.Billert Runyao Yu Stefan Erschen Michael Frey Frank Gauterin Karlsruhe Institute of Technology(KIT) Institute of Vehicle System TechnologyKarlsruhe 76131Germanyand also with Bayerische Motoren Werke(BMW)AGMunich 80788Germany Technical University of Munich(TUM) Munich 80333Germany BMW ag Munich 80788Germany KIT Institute of Vehicle System TechnologyKarlsruhe 76131Germany

The battery thermal management of electric vehicles can be improved using neural networks predicting quantile sequences of the battery *** work extends a method for the development of Quantile Convolutional and Quantile Recurrent Neural Networks(namely Q*NN).Fleet data of 225629 drives are clustered and balanced,simulation data from 971 simulations are augmented before they are combined for training and *** Q*NN hyperparameters are optimized using an efficient Bayesian optimization,before the Q*NN models are compared with regression and quantile regression models for four *** analysis of point-forecast and quantile-related metrics shows the superior performance of the novel Q*NN *** median predictions of the best performing model achieve an average RMSE of 0.66°C and R^(2) of *** predicted 0.99 quantile covers 98.87%of the true values in the test *** conclusion,this work proposes an extended development and comparison of Q*NN models for accurate battery temperature prediction.

关键词： deep learning battery temperature convolutional and recurrent neural network quantile forecasting

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Photo-responsive functional materials based on light-driven molecular motors

引用

Light(Science & Applications) 2024年第3期13卷 407-420页

作者： Yanping Deng Guiying Long Yang Zhang Wei Zhao Guofu Zhou Ben L.Feringa Jiawen Chen SCNU-UG International Joint Laboratory of Molecular Science and Displays National Center for International Research on Green OptoelectronicsSouth China Normal UniversityGuangzhou 510006China Stratingh Institute for Chemistry University of GroningenNijenborgh 49747AG GroningenThe Netherlands

In the past two decades,the research and development of light-triggered molecular machines have mainly focused on developing molecular devices at the nanoscale.A key scientific issue in the field is how to amplify the controlled motion of molecules at the nanoscale along multiple length scales,such as the mesoscopic or the macroscopic scale,or in a more practical perspective,how to convert molecular motion into changes of properties of a macroscopic ***-driven molecular motors are able to perform repetitive unidirectional rotation upon irradiation,which offers unique opportunities for responsive macroscopic *** several reviews that focus on the design,synthesis and operation of the motors at the nanoscale,photo-responsive macroscopic materials based on light-driven molecular motors have not been comprehensively *** the present review,we first discuss the strategy of confining absolute molecular rotation into relative rotation by grafting motors on ***,examples of self-assemble motors in supramolecular polymers with high internal order are ***,we will focus on building of motors in a covalently linked system such as polymeric gels and polymeric liquid crystals to generate complex responsive ***,a perspective toward future developments and opportunities is *** review helps us getting a more and more clear picture and understanding on how complex movement can be programmed in light-responsive systems and how man-made adaptive materials can be invented,which can serve as an important guideline for further design of complex and advanced responsive materials.

关键词： functions materials material

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Hydrodynamic function and spring constant calibration of FluidFM micropipette cantilevers

引用

Microsystems & Nanoengineering 2024年第1期10卷 277-286页

作者： Attila Bonyár Ágoston G.Nagy Hans Gunstheimer Gotthold Fläschner Robert Horvath Department of Electronics Technology Faculty of Electrical Engineering and InformaticsBudapest University of Technology and EconomicsBudapestHungary Nanobiosensorics Laboratory Institute of Technical Physics and Materials ScienceCentre for Energy ResearchHUN-RENBudapestHungary Nanosurf ag Gräubernstrasse 12CH-4410 LiestalSwitzerland

Fluidic force microscopy(FluidFM)fuses the force sensitivity of atomic force microscopy with the manipulation capabilities of microfluidics by using microfabricated cantilevers with embedded fluidic *** innovation initiated new research and development directions in biology,biophysics,and material *** acquire reliable and reproducible data,the calibration of the force sensor is ***,the hollow FluidFM cantilevers contain a row of parallel pillars inside a rectangular *** precise spring constant calibration of the internally structured cantilever is far from trivial,and existing methods generally assume simplifications that are not applicable to these special types of *** addition,the Sader method,which is currently implemented by the FluidFM community,relies on the precise measurement of the quality factor,which renders the calibration of the spring constant sensitive to *** this study,the hydrodynamic function of these special types of hollow cantilevers was experimentally determined with different *** on the hydrodynamic function,a novel spring constant calibration method was adapted,which relied only on the two resonance frequencies of the cantilever,measured in air and in a *** on these results,our proposed method can be successfully used for the reliable,noise-free calibration of hollow FluidFM cantilevers.

关键词： spring cantilever function

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A novel multi-channel porous structure facilitating mass transport towards highly efficient alkaline water electrolysis

引用

Journal of Energy Chemistry 2024年第6期93卷 511-518,I0013页

作者： Xinge Jiang Vasileios Kyriakou Chen Song Xianbin Wang Sophie Costil Chunming Deng Taikai Liu Tao Jiang Hanlin Liao Universitéde technologie de Belfort Montbéliard Centre national de la recherche scientifiqueLaboratoire Interdisciplinaire Carnot de BourgogneBelfort 90010France Department of Chemical Engineering Engineering and Technology Institute Groningen(ENTEG)University of GroningenGroningen 9747 AGThe Netherlands The Institute of New Materials Guangdong Academy of ScienceGuangzhou 510650GuangdongChina

An advantageous porous architecture of electrodes is pivotal in significantly enhancing alkaline water electrolysis(AWE)efficiency by optimizing the mass transport *** effect becomes even more pronounced when aiming to achieve elevated current ***,we employed a rapid and scalable laser texturing process to craft novel multi-channel porous ***,the obtained electrodes exhibit the lowest Tafel slope of 79 mV dec^(-1)(HER)and 49 mV dec^(-1)(OER).As anticipated,the alkaline electrolyzer(AEL)cell incorporating multi-channel porous electrodes(NP-LT30)exhibited a remarkable improvement in cell efficiency,with voltage drops(from 2.28 to 1.97 V)exceeding 300 mV under 1 A cm^(-1),compared to conventional perforated Ni plate *** enhancement mainly stemmed from the employed multi-channel porous structure,facilitating mass transport and bubble dynamics through an innovative convection mode,surpassing the traditional convection ***,the NP-LT30-based AEL cell demonstrated exceptional durability for 300 h under 1.0 A cm^(-2).This study underscores the capability of the novel multi-channel porous electrodes to expedite mass transport in practical AWE applications.

关键词： Alkaline water electrolysis Mass transport Bubble dynamics Innovative convection mode Multi-channel porous structure

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

退火热处理对增材制造AlSi10Mg合金宏观和微观变形行为的影响

引用

金属学报 2024年第8期60卷 1091-1099页

作者：张星星 LUTZ Andreas 甘为民 MAAWAD Emad KRIELE Armin 中国科学院高能物理研究所多学科研究中心北京100049 Mercedes Benz ag Research and Development DepartmentLeibnizstr.271032 BöblingenGermany Institute of Materials Physics Helmholtz-Zentrum HereonMax-lanck-Str.121502 GeesthachtGermany German Engineering Materials Science Centre(GEMS)at Heinz Maier-Leibnitz Zentrum(MLZ) Helmholtz-Zentrum Hereon85748 GarchingGermany

增材制造AlSi10Mg合金存在显著的残余应力,对零件的形状尺寸精度、服役安全性和抗腐蚀性能等产生不利影响。在实际应用中,对残余应力敏感的应用需采用去应力退火以消除残余应力。然而,目前对增材制造AlSi10Mg合金退火后力学特性的理解... 详细信息

增材制造AlSi10Mg合金存在显著的残余应力,对零件的形状尺寸精度、服役安全性和抗腐蚀性能等产生不利影响。在实际应用中,对残余应力敏感的应用需采用去应力退火以消除残余应力。然而,目前对增材制造AlSi10Mg合金退火后力学特性的理解还停留在宏观层面。为了更深入地揭示其微观力学行为与内在机制,本工作利用同步辐射X射线衍射技术,对合金进行原位变形研究,分析Al和Si相的晶格应变应力演化,明确各物相对合金加工硬化率的具体贡献,并对位错密度的演变进行了量化分析,从而阐明了退火热处理对增材制造AlSi10Mg合金载荷传递行为与位错行为的影响。

关键词：同步辐射X射线衍射原位变形增材制造 AlSi10Mg合金热处理

来源：

维普期刊数据库

同方期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Mechanical and Electrical Properties of Some Sn-Zn Based Lead-Free Quinary Alloys

引用

Materials Sciences and Applications 2024年第7期15卷 213-227页

作者： Shihab Uddin Md. Abdul Gafur Suraya Sabrin Soshi Mohammad Obaidur Rahman Department of Physics Jahangirnagar University Savar Dhaka Bangladesh Pilot Plant and Process development Centre Dhaka Bangladesh Department of Mechanical Engineering Ahsanullah University of Science and Technology Tejgaon Dhaka Bangladesh

Although there are many lead-free soldering alloys on the market, none of them have ideal qualities. The researchers are combining binary alloys with a variety of additional materials to create the soldering alloys’ features. The eutectic Sn-9Zn alloy is among them. This paper investigated the mechanical and electrical properties of Sn-9Zn-x (ag, Cu, Sb);{x = 0.2, 0.4, and 0.6} lead-free solder alloys. The mechanical properties such as elastic modulus, ultimate tensile strength (UTS), yield strength (YS), and ductility were examined at the strain rates in a range from 4.17 10−3 s−1 to 208.5 10−3 s−1 at room temperature. It is found that increasing the content of the alloying elements and strain rate increases the elastic modulus, ultimate tensile strength, and yield strength while the ductility decreases. The electrical conductivity of the alloys is found to be a little smaller than that of the Sn-9Zn eutectic alloy.

关键词： Lead-Free Solder Strain Rate Ultimate Tensile Strength Ductility Electrical Conductivity

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Full-spectrum Bi@SrTiO_(3) for bi-directional promotion effects on photocatalytic redox reaction:Insight into intermediates and mechanism

引用

Journal of Rare Earths 2024年第5期42卷 917-929,I0004页

作者： Bin Liu Nanhao Zhou Jun Liu Xinglei Wang Peter K.J.Robertson Xiaoyuan Chen Chao Chen Jianmin Luo Chuanyi Wang School of Chemistry and Civil Engineering Shaoguan UniversityShaoguan512005China Chengdu Customs Technology Center Chengdu610041China Key Laboratory of Pollutant Chemistry and Environmental Treatment College of Chemistry and Environmental ScienceYili Normal UniversityYining835000China School of Chemistry and Chemical Engineering Queen's University BelfastStranmillis RoadBelfastBT95AGUnited Kingdom Guangzhou Institute of Industrial Intelligence(GIII) Guangzhou511400China

The development of full-spectrum photocatalysts active in the near-infrared(NIR)region has gained increasing attention for deleterious pollutant *** integration of plasmonic metals with semico nductors is an effective way to widen the light re sponse range of photocatalysts due to the strong light absorption and fast plasmonic energy transfer of the localized surface plasmon resonance(LSPR).In this work,the full-spectrum responsive Bi@SrTiO_(3) was prepared via facile solvothermal chemical *** optimal Bi@SrTiO_(3) achieves exceptional photocatalytic Cr(VI)reduction efficiency and tetracycline degradation,realizing bi-directional promotion effects on redox *** to density functional theory(DFT)simulations,the extraordinary photocatalytic performance is attributed to the tunable builtin electric field(IEF)of the Ohmic *** favorable adaptability in real water and high stability of BSTO-25 were proved by experime ntal *** the po ssible photocatalytic mechanism was proposed based on theoretical calculation and experimental ***,the non-toxicity of the BSTO-25 was evaluated by *** cultivation,which further proves the feasibility of treating wastewater with *** work provides a new perspective on constructing full-spectrum-driven photocatalysts for applications dealing with environmental remediation.

关键词： Full-spectrum photocatalysts Localized surface plasmon resonance Ohmic contact Cr(Ⅵ)reduction Antibiotic degradation Rare earths

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Ti_(3)C_(2)T_(x)MXene wrapped,carbon-coated porous Si sheets for improved lithium storage performance

引用

Chinese Chemical Letters 2024年第2期35卷 617-621页

作者： Hui Cheng Yueming Liu Zhongling Cheng Xianying Wang Na Huang Haijiao Zhang Institute of Nanochemistry and Nanobiology School of Environmental and Chemical EngineeringShanghai UniversityShanghai 200444China Shanghai Key Laboratory of Green Chemistry and Chemical Processes School of Chemistry and Molecular EngineeringEast China Normal UniversityShanghai 200062China Energy Materials Research Center ag Hydrogen Materials & Devices CAS Key Laboratory of Materials for Energy ConversionShanghai Institute of CeramicsChinese Academy of Sciences (SICCAS)Shanghai 200050China

Si-based materials have shown great potential as lithium-ion batteries(LIBs)anodes due to their natural reserves and high theoretical ***,the large volume changes during cycles and poor conductivity of Si lead to rapid capacity decay and poor cycling stability,ultimately limiting their commercial ***,we have skillfully utilized the microporous MCM-22 zeolite as the unique silicon source to produce porous Si(pSi)sheets by a simple magnesiothermic reduction,followed by a carbon coating and further Ti_(3)C_(2)T_(x)MXene assembly,obtaining the ternary pSi@NC@TNSs *** the design,porous Si sheets provide more active sites and shorten Li-ion transport paths for electrochemical *** N-doped carbon(NC)layer serves as a bonding layer to couple pSi and Ti_(3)C_(2)T_(x).The conductive network formed by 2D Ti_(3)C_(2)T_(x)and medium NC layer effectively enhances the overall charge transport of the electrode material,and helps to stabilize the electrode ***,the as-made pSi@NC@TNSs anode delivers an improved lithium storage performance,exhibiting a high reversible capacity of 925 mAh/g at 0.5 A/g after 100 *** present strategy provides an effective way towards high-performance Si-based anodes for LIBs.

关键词： Si anodes Ti_(3)C_(2)Ti_(x)MXene Porous structure Interfacial assembly Lithium-ion batteries

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：