检索结果-南通市图书馆

Progress of gaseous arsenic removal from flue gas by adsorption:Experimental and theoretical calculations

Journal of Environmental Sciences 2024年第2期136卷 470-485页

作者： Xuelei Yan Qingzhu Li Xiaowei Huang Bensheng Li Shengtu Li Qingwei Wang School of metallurgy and Environment Central South UniversityChangsha 410083China National Engineering research Centre for Control and Treatment of Heavy metal Pollution Central South UniversityChangsha 410083China National Engineering research Center for Rare Earth Materials General Research Institute for Non-Ferrous MetalsBeijing 100088China

Because of its high mobility and difficult capture,gaseous arsenic pollution control has become the focus of arsenic pollution control.It mainly exists in the form of highly toxic As_(2)O_(3)in the flue gas.Therefore,removing gaseous As_(2)O_(3)from flue gas is of great practical significance for arsenic pollution control.Stabilizing gaseous As_(2)O_(3)on the surface of adsorbents by physical or chemical adsorption is an effective way to reduce the content of arsenic in the flue gas and alleviate arsenic pollution.Over the past few decades,various adsorbents have been developed to capture gaseous As_(2)O_(3)in the flue gas,and their adsorption mechanisms have been studied in detail.Thus,it is necessary to review the strategies of arsenic removal from flue gas by adsorption,which can inspire further research.Based on summarizing the morphological distribution of gaseous As_(2)O_(3)in the flue gas,this review further summarizes the removal of gaseous As_(2)O_(3)by several adsorbents and the effect of temperature and the main components of the flue gas on arsenic adsorption.In addition,the mechanism of arsenic removal based on adsorption in the flue gas is discussed in depth through theoretical calculations,which is the particular focus of this review.Finally,prospects based on the present research state of arsenic removal by adsorption are proposed to provide ideas for developing effective and stable adsorbents for arsenic removal from flue gas.

关键词： Gaseous arsenic Flue gas Adsorption Theoretical calculation Mechanism

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

The effect of secondary phase on corrosion behaviors of the titanium–zirconium–molybdenum alloy

引用

Tungsten 2024年第2期6卷 342-354页

作者： Song-Wei Ge Ping Hu Jie Deng Shi-Lei Li Hai-Rui Xing Jia-Yu Han Xing-Jiang Hua Li Wang Jun-Zhou Yang Bo Jin Wen Zhang Kuai-She Wang School of metallurgy Engineering Xi’an University of Architecture and TechnologyXi’an 710055China National and Local Joint Engineering research Center for Functional Materials Processing Xi’an University of Architecture and TechnologyXi’an 710055China Western Xinxing Rare and Precious metals Co. Ltd.Shangluo 726000China northwest institute for non-ferrous metal research Xi’an 710016China

As the range of applications for molybdenum and its alloys has expanded,the corrosive environment for molybdenum alloys has become more demanding.In the past,the content of doping elements has been studied to investigate their infl uence on the corrosion performance of titanium–zirconium–molybdenum(TZM)alloys.In this paper,it is considered that the second phase in the alloy is the main factor aff ecting the corrosion performance of TZM alloys.By comparing the corrosion behavior of molybdenum metal and TZM alloy,the eff ect of the secondary phase on corrosion behaviors of TZM alloy has been investigated.The results show that the second phase reduces the corrosion resistance of the TZM alloy.The potential of the second phase is 73.7 mV higher than that of the Mo matrix,which contributes to the formation of microscopic electric couples.Under the action of microscopic electric couples,pitting corrosion is preferentially formed at the interface between the second phase and the matrix,which accelerates the corrosion of the matrix.This paper provides a theoretical basis for the application of TZM alloys in corrosive environments.

关键词： Secondary phase Electrochemical corrosion Titanium–zirconium–molybdenum(TZM) Galvanic corrosion Corrosion resistance

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Pressure-Tuned Intrinsic Anomalous Hall Conductivity in Kagome Magnets RV_(6)Sn_(6)(R=Gd,Tb)

引用

Chinese Physics Letters 2024年第4期41卷 139-151页

作者：孔祥明陶咨成张蕊夏威陈旭裴翠颖应天平齐彦鹏郭艳峰杨小帆李世燕 State Key Laboratory of Surface Physics Department of PhysicsFudan UniversityShanghai 200438China Shanghai research Center for Quantum Sciences Shanghai 201315China School of Physical Science and Technology ShanghaiTech UniversityShanghai 201210China ShanghaiTech Laboratory for Topological Physics Shanghai 201210China northwest institute for non-ferrous metal research Xi'an 710016China Beijing National Laboratory for Condensed Matter Physics and Institute of PhysicsChinese Academy of SciencesBeijing 100190China Shanghai Key Laboratory of High-resolution Electron Microscopy Shanghai 201210China Collaborative Innovation Center of Advanced Microstructures Nanjing 210093China

Exploration of exotic phenomena in magnetic topological systems is at the frontier of condensed matter physics,holding a significant promise for applications in topological spintronics.However,complex magnetic structures carrying nontrivial topological properties hinder its progresses.Here,we investigate the pressure effect on the novel topological kagome magnets GdV_(6)Sn_(6) and TbV_(6)Sn_(6) to dig out the interplay between magnetic Gd/Tb layers and nonmagnetic V-based kagome sublattice.The pressure-tuned magnetic transition temperature Tm in both the compounds exhibit a turning point at the critical pressure P_(c),accompanied with a sign reversal in anomalous Hall effect(AHE).The separation of intrinsic and extrinsic contributions using the Tian-Ye-Jin scaling model suggests that the intrinsic mechanism originating from the electronic Berry curvature holds the priority in the competition with extrinsic mechanism in AHE.The above-mentioned findings can be attributed to the combined effect of pressure-tuned band topology and magnetic interaction in segregated layers.Our results provide a practical route to design and manipulate the intrinsic AHE in magnetic topological materials.

关键词： holds frontier hinder

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Biomedical rare-earth magnesium alloy:Current status and future prospects

引用

Journal of Magnesium and Alloys 2024年第4期12卷 1260-1282页

作者： Mingli Yang Cheng Chen Dongsheng Wang Yinjin Shao Wenhao Zhou Cijun Shuai Youwen Yang Xinghai Ning institute of Additive Manufacturing Jiangxi University of Science and TechnologyNanchang 330013China Key Laboratory of Construction Hydraulic Robots of Anhui Higher Education institutes Tongling UniversityTongling 244061China Department of Rehabilitation Ganzhou People’s HospitalGanzhou 341099China Shaanxi Key Laboratory of Biomedical metallic Materials Northwest Institute for Non-Ferrous Metal ResearchXi’an 710016China State Key Laboratory of High Performance Complex Manufacturing Central South UniversityChangsha 410083China School of Mechanical and Electrical Engineering Jiangxi University of Science and TechnologyGanzhou 341000China College of Engineering and Applied Science Nanjing University210089China

Biomedical magnesium(Mg)alloys have garnered significant attention because of their unique biodegradability,favorable biocompatibility,and suitable mechanical properties.The incorporation of rare earth(RE)elements,with their distinct physical and chemical properties,has greatly contributed to enhancing the mechanical performance,degradation behavior,and biological performance of biomedical Mg alloys.Currently,a series of RE-Mg alloys are being designed and investigated for orthopedic implants and cardiovascular stents,achieving substantial and encouraging research progress.In this work,a comprehensive summary of the state-of-the-art in biomedical RE-Mg alloys is provided.The physiological effects and design standards of RE elements in biomedical Mg alloys are discussed.Particularly,the degradation behavior and mechanical properties,including their underlying action are studied in-depth.Furthermore,the preparation techniques and current application status of RE-Mg alloys are reviewed.Finally,we address the ongoing challenges and propose future prospects to guide the development of high-performance biomedical Mg-RE alloys.

关键词： Magnesium alloy Rare earth elements Biodegradation behavior Mechanical performance Biological properties

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of cerium alloying on microstructure,texture and mechanical properties of magnesium during cold-rolling process

引用

Journal of Rare Earths 2024年第5期42卷 1001-1008,I0007页

作者： Zhen Zhang Huanhuan Chen Shiju Cao Jinhua Peng Peng Guo Chang Long Shan Wang Chang Chen Yong Wu Ji'an Huang Xiaodong Du Haigen Wei School of Materials Science and Engineering Hefei University of TechnologyHefei230009China NationalLocal Joint research Center of non-ferrous metal Materials and Processing Technology Hefei230009China Laboratory of nonferrous metal Material and Processing Engineering of Anhui Province Hefei230009China School of Materials Science and Engineering Jiangsu University of Science and TechnologyZhenjiang212003China institute of Industry and Equipment Technology Hefei University of TechnologyHefei230009China Faculty of Materials metallurgy and Chemistry Jiangxi University of Science and TechnologyGanzhou341000China

Hot-extrusion and cold-rolling were conducted on Mg-Ce binary alloys to explore the effect of cerium(Ce)on microstructure,texture and mechanical properties of Mg alloys.The addition of Ce results in significant grain refinement both in as-cast and hot-extruded samples.The basal texture is also weakened after extrusion and an inclined basal texture is formed with Ce addition.The strength and elongation of the Mg-Ce alloys are improved simultaneously due to such grain refinement and texture weakening effect.After cold-rolling,plenty of twins are found in the pure Mg and AZ31 plates while grains in the Mg-0.3Ce plate deform more uniformly without lamellar twin structure.Furthermore,Mg-0.3Ce alloys own strong and continuous strain hardening because Ce atoms and Mg-Ce precipitated phases serve as obstacles for dislocation slip.

关键词： Mg-Ce alloys Hot extrusion Cold-rolling Rare earths

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Structural and functional design of geopolymer adsorbents:a review

引用

Tungsten 2024年第1期6卷 48-76页

作者： Hai-Ze Jin Chen-Xi Qiu Yan-Song Li Bao Liu Jun-Yi Liu Qiao Chen Xue-Feng Lu Cui-Xia Li Qi-Kun Wang School of Materials Science and Engineering Lanzhou University of TechnologyLanzhou 730050China State Key Laboratory of Advanced Processing and Recycling of non-ferrous metals Lanzhou 730050China Shenyang nonferrous metals research institute Co. LTDShenyang 110000China Automotive Engineering research institute Jiangsu UniversityZhenjiang 212013China School of Materials Science and Engineering Jingdezhen Ceramic UniversityJingdezhen 333403China

The water pollution derived from the discharge of heavy metals,antibiotics,dyes and surfactants wastewater,etc.has seriously affected human survival and ecological security.As an efficient and low-cost physical wastewater treatment process,the adsorption is a continuous hot spot in related scientific research and applications.Geopolymers are non-crystal or semi-crystalline materials with high-efficiency adsorption performance due to the alkali metal ions that balance the electronegative aluminosilicate skeleton can be efficiently replaced by other cations in the aqueous environment.The related studies of different application conditions,service objects and morphological differences of geopolymer adsorbents based on structure-function design have been in-depth exploration and investigation.This review aims to summarize the research progres s of the structure-function design based on the geopolymerization mechanism and kinetics and service requirements.An overview of service characteristics and progress of geopolymers in the wastewater treatment field(e.g.,dyes,heavy metals,radionuclides,surfactants,antibiotics,ammonium,phosphorus,nitrogen and CO_(2),etc.)are systematically discussed.And the evolution and development of morphological differences and the relationship of structure-function design of geopolymer adsorbents were compared and reviewed.Finally,the challenge worth overcoming,the trends worth considering and perspectives worth developing are highlighted.

关键词： Geopolymer Wastewater Adsorption Structure-function design Application

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Influence of heat treatment on microstructure,mechanical and corrosion behavior of WE43 alloy fabricated by laser-beam powder bed fusion

引用

International Journal of Extreme Manufacturing 2024年第1期6卷 258-275页

作者： Chenrong Ling Qiang Li Zhe Zhang Youwen Yang Wenhao Zhou Wenlong Chen Zhi Dong Chunrong Pan Cijun Shuai College of Mechanical and Electrical Engineering Jiangxi University of Science and TechnologyGanzhou 341000People’s Republic of China School of Mechanical and Electronic Engineering Suzhou UniversitySuzhou 234000People’s Republic of China Shaanxi Key Laboratory of Biomedical metal Materials Northwest Institute for Non-ferrous Metal ResearchXi’an 710016People’s Republic of China Department of Orthopedics First Afffliated Hospital of Gannan Medical CollegeGanzhou 341000People’s Republic of China School of Mechanical and Automotive Engineering South China university of technologyGuangzhou 510641People’s Republic of China State Key Laboratory of High-Performance Complex Manufacturing Central South UniversityChangsha 410083People’s Republic of China Double Medical Technology Inc. Xiamen 361026People’s Republic of China

Magnesium(Mg)alloys are considered to be a new generation of revolutionary medical metals.Laser-beam powder bed fusion(PBF-LB)is suitable for fabricating metal implants withpersonalized and complicated structures.However,the as-built part usually exhibits undesirable microstructure and unsatisfactory performance.In this work,WE43 parts were firstly fabricated by PBF-LB and then subjected to heat treatment.Although a high densification rate of 99.91%was achieved using suitable processes,the as-built parts exhibited anisotropic and layeredmicrostructure with heterogeneously precipitated Nd-rich intermetallic.After heat treatment,fine and nano-scaled Mg24Y5particles were precipitated.Meanwhile,theα-Mg grainsunderwent recrystallization and turned coarsened slightly,which effectively weakened thetexture intensity and reduced the anisotropy.As a consequence,the yield strength and ultimate tensile strength were significantly improved to(250.2±3.5)MPa and(312±3.7)MPa,respectively,while the elongation was still maintained at a high level of 15.2%.Furthermore,the homogenized microstructure reduced the tendency of localized corrosion and favoredthe development of uniform passivation film.Thus,the degradation rate of WE43 parts was decreased by an order of magnitude.Besides,in-vitro cell experiments proved their favorable biocompatibility.

关键词： laser-beam powder bed fusion WE43 alloys heat treatment mechanical performance biodegradation behavior

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Petrogenesis and Economic Potential of the Sangong MaficUltramafic Intrusion in the Eastern Tianshan, Central Asian Orogenic Belt: Constraints from Mineral, Whole-Rock, and PGE Geochemistry

引用

Journal of Earth Science 2024年第3期35卷 850-865页

作者： Guochao Zhou Yuwang Wang Jingbin Wang Yu Shi Hongjing Xie Dedong Li Yong Fu Pan Wu College of Resources and Environmental Engineering Guizhou UniversityGuiyang 550012China Technic research Center for Deep Resources Exploration in non-ferrous metal Mines Beijing Institute of Geology for Mineral Resources Co.Ltd.Beijing 100012China Sino-Zijin Resources Ltd. Beijing 100012China State Key Laboratory of Nuclear and Environment East China University of TechnologyNanchang 330013China

The Sangong Cu-Ni sulfide mineralized mafic-ultramafic intrusion is located on the southern margin of the Bogeda-Harlik belt,eastern Tianshan,China.The intrusion is a well-differentiated complex and is comprised of leucogabbro,gabbro,olivine gabbro,Pl-bearing peridotite,and Pl-bearing pyroxenite.The Pl-bearing pyroxenite hosts both irregularly disseminated sulfide and round droplet sulfide.The intrusive rocks have a wide range of SiO_(2)(42.1 wt.%-50.48 wt.%)and MgO(6.21 wt.%-22.11 wt.%),and are enriched in light rare earth elements(LREE),large-ion lithophile elements(LILE;e.g.,Rb,Ba,Sr,and Pb),and palladium platinum group elements(PPGE)but depleted in high-field-strength elements(HFSE;e.g.,Nb,Ta,and Ti)and iridium PGEs(IPGE).These geochemical characteristics indicate that the Sangong mafic-ultramafic intrusion was derived from high degree of partial melting of depleted mantle and interacted with subduction-related material.The low Pd/Ir(3.21-27.44)but high Ni/Cu(1.64-24.16)ratios,combined with the olivine crystals with low Fo(60.88-78.65)and Ni(54.99 ppm-1688.87 ppm)concentrations suggest that the parental magma of the Sangong intrusion were likely high MgO basaltic in composition that experienced extensive evolution prior emplacement.The Ce/Pb ratios(5.8-13.6)and Nb/U ratios(11.6-30.3)of the intrusive rocks all range between MORB and crustal values,the Nb/Yb and Th/Yb values are close to the lower crust values,together with the low Se/S ratios[(17-100)×10^(-6))]suggest that the magma experienced assimilation not only in mantle source but also in conduit,but the degree of crustal contamination is limited.The Cu/Pd ratios of the rocks range from 3.9×10^(4) to 10.8×10^(4),and the Cu/Zr ratios of Pl-bearing pyroxenite in the Sangong intrusion are>1,combined with the presence of sulfide droplets in the Pl-bearing pyroxenite,indicating the parental magma experienced sulfide saturation and the economical ore bodies may present in the depth of the intrusion.Furthermore,given the discovery of the Baixintan and Yueyawan

关键词： Sangong mafic-ultramafic intrusion deposits geochemistry PGE economic potential eastern Tianshan.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Synergistic effect between Er-doped MoS_(2)nanosheets and interfacial Mo-N coupling phases for enhanced electrocatalytic hydrogen evolution

引用

Rare metals 2024年第3期43卷 1301-1308页

作者： Nian-Peng Li Lei Zhang Hua Zhang Fan-Fei Min Lei Wang Sam Toan Xi-Jun Liu Guang-Zhi Hu State Key Laboratory of Mining Response and Disaster Prevention and Control in Deep Coal Mines School of Materials Science and EngineeringAnhui University of Science and TechnologyHuainan232001China Donghai Laboratory Zhoushan316021China Department of Chemical Engineering University of Minnesota-DuluthDuluthMN55812USA School of Ecology and Environmental Science Institute for Ecological Research and Pollution Control of Plateau LakesYunnan UniversityKunming650504China MOE Key Laboratory of New Processing Technology for non-ferrous metals and Materials Guangxi Key Laboratory of Processing for Non-Ferrous Metals and Featured MaterialsGuangxi UniversityNanning530004China

Hydrogen production via electrochemical water splitting is a promising and green technology.As one of the most representative transition metal sulfides layered materials,Molybdenum disulfide(MoS_(2))has immense potential for the hydrogen evolution reaction(HER).We successfully prepared a nitrogen-doped carbon(NC)in situ-grown erbium-doped MoS_(2)polyhedral structure(Er-MoS_(2)/NC)that incorporates an interfacial Mo-N coupling phase.

关键词： hydrogen interfacial coupling

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Thermal-contact capacity of one-dimensional attractive Gaudin-Yang model

引用

Chinese Physics B 2024年第4期33卷 231-235页

作者：张小敏程颂陈洋洋 institute of Modern Physics Northwest UniversityXi'an 710069China Beijing Computational Science research Center Beijing 100193China Peng Huanwu Center for Fundamental Theory Northwest UniversityXi'an 710069China Shaanxi Key Laboratory for Theoretical Physics Frontiers Northwest UniversityXi'an 710069China

Tan's contact C is an important quantity measuring the two-body correlations at short distances in a dilute system.Here we make use of the technique of exactly solved models to study the thermal-contact capacity K_(T),i.e.,the derivative of C with respect to temperature in the attractive Gaudin-Yang model.It is found that K_(T) is useful in identifying the low temperature phase diagram,and using the obtained analytical expression of K_(T),we study its critical behavior and the scaling law.Especially,we show K_(T) versus temperature and thus the non-monotonic tendency of C in a tiny interval,for both spin-balanced and imbalanced phases.Such a phenomenon is merely observed in multi-component systems such as SU(2)Fermi gases and spinor bosons,indicating the crossover from the Tomonaga-Luttinger liquid to the spin-coherent liquid.

关键词： Tan's Contact Gaudin-Yang model Bethe ansatz

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：