检索结果-南通市图书馆

Rare metals 2024年第4期43卷 1786-1792页

作者： Yuan-Feng Xie Xing-Cheng Xie Zhong-Wu Li Rui-Jun Cao Zhong-Kun Lin Qing Li Chen-Guang Lin Powder metallurgy and Special Materials research Department General Research Institute for Nonferrous MetalsBeijing100088China

The effects of cryogenic treatment(CT)and tempering-cryogenic treatment(TCT)on the microstructure and properties of coarse-grained WC-10Co cemented carbides with different carbon contents were *** binder phase,WC mean grain sizes,W solubility in the binder,relative magnetic s aturation,densities,hardness,wear resistance and second phase precipitation of cemented carbides with different heat treatments were *** results show that there are significant changes of microstructure and properties in the samples with CT and TCT,especially due to the precipitation of metastable nanoparticles W_(x)Co_(y)C_(z) in the binder during the heat treatments of CT and *** the simultaneous combination of microstructure and nanoparticle-reinforced binder,a dramatically improved combination of hardness and wear resistance of the samples after TCT has been achieved.

关键词： Cryogenic treatment Tempering Coarsegrained cemented carbide Carbon content Nanoparticlereinforced binder

Preparation and characterization of Rb-doped TiO_(2) powders for photocatalytic applications

在线全文

学校读者我要写书评

暂无评论

Rare metals 2024年第2期43卷 555-561页

作者： Lu Jia Li-Mei Yang Wei Wang Song-Tao Huang Zheng Xu National Engineering Laboratory of Biohydrometallurgy General Research Institute for Nonferrous MetalsBeijing100088China

TiO_(2)nanoparticles doped with different concentrations of Rb were prepared by sol–gel *** crystal structures of samples were characterized by X-ray diffraction(XRD)and transmission electron microscopy(TEM).It was confirmed by the Rietveld refinement method that the as-prepared samples crystallize in anatase phase and Rb doping induces expansion and distortion of the crystal *** with the pure TiO_(2),the Rb-doped nanoparticles have smaller crystal size and better *** rate of methylene blue was used to evaluate the photocatalytic activity of Rb–TiO_(2).It indicated that doping Rb into TiO_(2)can effectively improve the photocatalytic activity of TiO_(2)and the mechanisms were discussed in *** using the sample doped with 0.20%Rb,methylene blue degraded with the fastest rate(97%within 60 min).

关键词： Rb doping TiO_(2) Photocatalysis Sol-gel

A high-performance lithium anode based on N-doped composite graphene

在线全文

学校读者我要写书评

暂无评论

Rare metals 2024年第3期43卷 1030-1036页

作者： Can Jiao Hao-Bo Sun Li Zhang Shang-Qian Zhao Guo-Yao Pang Chun-Rong Zhao Shi-Gang Lu General research institute for nonferrous metals Beijing100088China China Automotive Battery research institute Co.Ltd Beijing101407China

Lithium(Li)metal is the most promising electrode for next-gene ration rechargeable *** order to push the commercialization of the lithium metal batteries,a kind of nitrogen(N)-doped composite graphene(NCG)adopted as the Li plating host was prepared to regulate Li metal nucleation and suppress dendrite ***,a new kind of sandwich-type composite lithium metal(STCL)electrode was developed to improve its *** STCL electrode can be used as convenient as a piece of Li foil but no dendrite *** a symmetric battery,the STCL electrode cycled for more than 4500 h with the overpotential of less than 40 *** due to the creative design,the STCL promises the Li-S battery with a prolonged cycling lifespan.

关键词： Lithium metal anode Lithiophilic N-doped composite graphene Sandwich-type composite lithium metal electrode

Dielectric and energy storage properties of PbO–SrO–Nb_(2)O_(5)–Na_(2)O–Si thin films by annealing

在线全文

学校读者我要写书评

暂无评论

Rare metals 2024年第1期43卷 351-355页

作者： Fei-Hu Tan Qing-Meng Zhang Feng Wei Hong-Bin Zhao Xiao Zhang Jun Du State Key Laboratory of Advanced Materials for Smart Sensing General Research Institute for Nonferrous MetalsBeijing 100088China Advanced Electronic Materials institute General Research Institute for Nonferrous MetalsBeijing 100088China

Dielectric and energy storage properties of PbOSrO-Na_(2)O-Nb_(2)O_(5)-SiO_(2)(PSNNS) thin films with annealing temperature from 700 to 850 ℃ were investigated by measuring their capacitance-electric filed curve and hysteresis *** results show that the highest dielectric constant and energy density are 81.2 and 17.0 J·cm^(-3),respectively,which is obtained in the sample with annealing temperature of 800 ℃.Annealed from 700 to800 ℃,the dielectric constant and energy storage performance of PSNNS films are continuously ***,with annealing temperature up to 850 ℃,their dielectric constant decreases,which might be related with the removal of interfacial defects as a function of annealing *** is one of the causes of space charge phenomenon,resulting in the increase in dielectric ***,the micro structure analysis by X-ray diffraction(XRD) and transmission electron microscope(TEM) indicates that the change of crystallization phase and interfacial polarization takes responsibility to the results.

关键词： Thin film Pulse laser deposition Annealing temperature Energy storage density

Hot Deformation Behavior of Ti-6Al-4V-0.5Ni-0.5Nb Titanium Alloy

在线全文

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2024年第5期39卷 1270-1277页

作者： ZHU Guochuan LIU Qiang SONG Shengyin HUI Songxiao YU Yang YE Wenjun QI Jun TANG Zhengwei XU Penghai CNPC Tubular Goods research institute Xi’an 710077China State Key Laboratory for Fabrication&Processing of nonferrous metals Beijing General Research Institute for Nonferrous MetalsBeijing 100088China China Petroleum Tarim Oilfield Company Korla 841000China

Characterization of hot deformation behavior of Ti-6Al-4V-0.5Ni-0.5Nb titanium alloy was investigated through isothermal compression at various temperatures from 750 to 1050℃and strain rate from 0.01 to 10 s^(-1).The isothermal compression experiment results showed that the peak stress of Ti-6Al-4V-0.5Ni-0.5Nb titanium alloy decreased with the temperature increasing and the strain rate *** softening mechanism was dynamic recovery below T_(β)and changed to dynamic recrystallization above T_(β).The arrheniustype relationship was used to calculate the constitutive equation of Ti-6Al-4V-0.5Ni-0.5Nb alloy in two-phase *** was found that the apparent activation energies were 427.095 kJ·mol^(-1)in theα+βphase region and 205.451 kJ·mol^(-1)in theβphase region,*** the basis of dynamic materials model,the processing map is generated,which shows that the highest peak efficiency of power dissipation of 56%occurs at about 1050℃/0.01 s^(-1).It can be found in the processing maps that the strain had significant effect on the peak region of power dissipation efficiency of Ti-6Al-4V-0.5Ni-0.5Nb ***,optimized hot working regions were investigated and validated through microstructure *** optimum thermo mechanical process condition for hot working of Ti-6Al-4V-0.5Ni-0.5Nb titanium alloy was suggested to be in the temperature range of 950-1000℃with a strain rate of 0.01-0.1 s^(-1).

关键词： titanium alloy hot deformation processing map dynamic recrystallization

Precipitation evolution and properties of Cu-15Ni-8Sn alloys via Al microalloying during ageing

在线全文

学校读者我要写书评

暂无评论

Rare metals 2024年第10期43卷 5216-5228页

作者： Wei Luo Li-Jun Peng Xu-Jun Mi Hao-Feng Xie Yi-Cheng Cao Shu-Hui Huang State Key Laboratory of nonferrous metals and Processes GRINM Group Co.Ltd. GRIMAT Engineering institute Co. Ltd. General research institute for nonferrous metals School of Materials Science and Engineering South China University of Technology

Studies have shown that microalloying Cu-Ni-Sn alloys using Al inhibits discontinuous precipitation reactions;however,the mechanism has not been investigated ***,this study explored the properties and precipitation evolution of Cu-15Ni-8Sn alloys without and with 1 wt%Al（Cu-15Ni-8Sn-1Al） during ageing at 500℃ through X-ray diffraction （XRD）,scanning electron microscopy and high-angle annular dark-field scanning transmission electron *** results revealed that in Cu-15Ni-8Sn alloy,DO22ordering first occurred after spinodal decomposition,subsequently transitioning to an L12ordering phase,during which the discontinuous precipitates gradually nucleated at the grain boundaries and formed *** alloy hardness increased sharply with ordering and then decreased rapidly after reaching its peak value,due to the dominance of the discontinuous precipitation ***,the DO22ordered phase did not appear during the ageing of Cu-15Ni-8Sn-1Al alloy,and a Ni3(Alx,Sn1-x) intermetallic compound with L12structure was formed,consuming Ni and Sn atoms,thereby significantly suppressing the discontinuous precipitation reaction and improving the stability during prolonged *** tensile strength （yield strength） of Cu-15Ni-8Sn and Cu-15Ni-8Sn-1Al alloys at peak hardness were 855 （755） and 936 MPa （892 MPa）,respectively,and their main strengthening mechanisms were solid solution strengthening and precipitation *** addition of 1 wt% Al effectively improved the precipitation strengthening effect of Cu-Ni-Sn alloys but severely decreased the ductility.

关键词： Al addition Cu-15Ni-8Sn Precipitation sequence Strengthening mechanism

Experimental and DFT Investigations of AlNbTiVZr High Entropy Alloys with Excellent Mechanical Properties

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Acta metallurgica Sinica(English Letters) 2024年第9期37卷 1480-1490页

作者： Hongwei Yan Yong'an Zhang Wei Xiao Boyu Xue Rui Liu Xiwu Li Zhihui Li Baiqing Xiong State Key Laboratory of nonferrous metals and Processes China GRINM Group Co.Ltd.Beijing100088China GRIMAT Engineering institute Co. Ltd.Beijing101407China General research institute for nonferrous metals Beijing100088China

This study investigated the microstructure and mechanical properties of AlNbTiVZr series high-entropy alloys(HEAs)through both experimental studies and density functional theory *** improvements in the microstructures and mechanical properties were achieved for the AlNbTiVZr series HEAs by meticulously adjusting the alloy composition and employing homogenization heat ***,the specimen designated as Al_(0.5)NbTiVZr_(0.5) demonstrated excellent mechanical properties including a compressive yield strength of 1162 MPa and a compressive strength of 1783 *** homogenization heat treatment at 1000℃ for 24 h,the Al_(0.5)NbTiVZr_(0.5) alloy exhibits brittle-to-ductile *** atomic-scale theoretical simulations reveal that the decrease of Al content intrinsically enhances the ductility of the alloys,thereby indicating that the mechanical properties of the AlNbTiVZr series HEAs were significantly influenced by the chemical ***,specific atomic pair formations were observed to adversely affect the microstructure of the AlNbTiVZr series HEAs,particularly in terms of *** findings provide valuable insights for the design and optimization of light weight HEAs,emphasizing the synergistic adjustment of alloy composition and heat treatment processes to achieve a balance between the strength and ductility.

关键词： High-entropy alloy Microstructure Mechanical properties Density functional theory

Improving strength-ductility synchronously of Electron beam welded Ti600/Ti2AlNb joint through isothermal forging

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Progress in Natural Science:Materials International 2024年第3期34卷 532-539页

作者： Yongqiang Zhang Xiangyi Xue Guoming Zheng Jingli Zhang Huiming Li Shewei Xin State Key Laboratory of Solidification Processing Northwestern Polytechnical University Xi'an Qin Ti Intelligent Manufacturing Technologies Co.Ltd. northwest institute for nonferrous metal research Xi'an University of Science and Technology Avic Xi'an Aircraft Industry Group Company Ltd.

Different alloys can be flexibly combined to meet the performance needs of different parts of the compressor disc by welding process. However, achieving a good combination of dissimilar alloys with different mechanical properties has always been a research difficulty. In this work, a Ti600/Ti2AlNb joint was fabricated through electron beam welding and an isothermal forging was used to optimized its microstructure and mechanical performance. The isothermal forging process increases the ultimate tensile strength（UST） and yield strength（YS）of the Ti600/Ti2AlNb joint by ～18 %, while ～2.5 times the ductility. It is indicated that before forging, the Ti600/Ti2AlNb joint exhibits a much lower strength than that of Ti600 matrix, whereas the opposite is true after isothermal forging. The isothermal forging broken the coarse columnar grains of Ti600/Ti2AlNb joint and render to an equiaxed B2 structure in which the acicular α2and O phase are precipitated, resulting a synchronous enhancement of strength and ductility. This work may pave an effective routine for improving the comprehensive mechanical properties of dissimilar metal welding joint.

关键词： Electron beam welding Isothermal forging Mechanical performance Ti600/Ti2AlNb joint

Exploring the ultrahigh rolling contact fatigue life of M50 bearing steel by adjusting the cryogenic sequence

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第2期169卷 243-250页

作者： Xin Cai Xiaoqiang Hu Xingyu Lu Hongwei Liu Yanfei Cao Dianzhong Li Shenyang National Laboratory for Materials Science Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China

The influence of different cryogenic sequences on the rolling contact fatigue(RCF)life of M50-bearing steel has been *** results show that direct cryogenic treatment after quenching can effectively improve RCF *** L_(10)life is strikingly 5 times longer than that with cryogenic treatment after *** is caused by the distinct lattice construction of martensite and the transformation of retained *** secondary nanocarbides and fine twins are formed via cryogenic treatment before tem-pering compared with cryogenic treatment after *** improvement in the RCF life of the steel is attributed to the joint effects of the secondary nanocarbides and twin boundaries with a width of 5-13 nm,which delays significantly crack initiation and *** study highlights a common method to improve the service life of high-carbon and high-alloy steels by adjusting the cryogenic se-quence.

关键词： M50 steel Cryogenic treatment Rolling contact fatigue life Carbide Twin

Preparation of high-purity fluorite and nanoscale calcium carbonate from low-grade fluorite

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,metallurgy and Materials 2024年第6期31卷 1198-1207页

作者： Qianqian Lu Haisheng Han Wenjuan Sun Xingfei Zhang Weiwei Wang Bilan Zhang Wensheng Chen Qin Zou School of Minerals Processing and Bioengineering Central South UniversityChangsha 410083China Hunan nonferrous Chenzhou Fluoride Chemical Co. Ltd.Chenzhou 423000China State Key Laboratory of Baiyunobo Rare Earth Resource researches and Comprehensive Utilization Baotou Research Institute of Rare EarthsBaotou 014030China Hunan Shizhuyuan nonferrous metal Co. Ltd.Chenzhou 423000China

Flotation separation of calcite from fluorite is a challenge on low-grade fluorite flotation that limits the recovery and purity of fluorite concentrate.A new acid leaching–flotation process for fluorite is proposed in this *** innovative process raised the fluor-ite’s grade to 97.26wt%while producing nanoscale calcium carbonate from its leachate,which contained plenty of calcium *** the production of nanoscale calcium carbonate,the impacts of concentration,temperature,and titration rate were *** modifying the process conditions and utilizing crystal conditioning agents,calcite-type and amorphous calcium carbonates with corresponding particle sizes of 1.823 and 1.511μm were *** influence of the impurity ions Mn^(2+),Mg^(2+),and Fe^(3+)was demonstrated to reduce the particle size of nanoscale calcium carbonate and make crystal shape easier to manage in the fluorite leach solution system compared with the calcium chloride *** combination of the acid leaching–flotation process and the nanoscale calcium carbonate preparation method improved the grade of fluorite while recovering calcite resources,thus presenting a novel idea for the effective and clean usage of low-quality fluorite resources with embedded microfine particles.

关键词： fluorite calcite nanoscale calcium carbonate waste recovery