检索结果-南通市图书馆

Journal of Energy Chemistry 2025年第1期100卷 621-627页

作者： Fei Lv Longjie Liu Jiazhe Wu Pengfei Wang Lixia Pan Dengwei Jing Yubin Chen International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University

Combining water electrolysis and rechargeable battery technologies into a single system holds great promise for the co-production of hydrogen （H2） and ***,the design and development of such systems is still in its ***,an integrated hydrogen-oxygen （O2）-electricity co-production system featuring a bipolar membrane-assisted decoupled electrolyzer and a Na-Zn ion battery was established with sodium nickelhexacyanoferrate （NaNiHCF） and Zn2+/Zn as dual redox *** decoupled electrolyzer enables to produce H2and O2in different time and space with almost 100%Faradaic efficiency at 100 mA ***,the charged NaNiHCF and Zn electrodes after the electrolysis processes formed a Na-Zn ion battery,which can generate electricity with an average cell voltage of 1.75 V at 10 m A *** connecting Si photovoltaics with the modular electrochemical device,a well-matched solar driven system was built to convert the intermittent solar energy into hydrogen and electric energy with a solar to hydrogen-electricity efficiency of 16.7%,demonstrating the flexible storage and conversion of renewables.

关键词： Hydrogen Electricity Decoupled water electrolyzer Na-Zn ion battery Solar energy

Laser‑Induced Highly Stable Conductive Hydrogels for Robust Bioelectronics

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第3期17卷 117-120页

作者： Yibo Li Hao Zhou Huayong Yang Kaichen Xu State key laboratory of Fluid power and Mechatronic Systems School of Mechanical EngineeringZhejiang UniversityHangzhou 310058People’s Republic of China

Despite the promising progress in conductive hydrogels made with pure conducting polymer,great challenges remain in the interface adhesion and robustness in longterm *** address these challenges,*** Hwan Ko and Taek-Soo Kim’s team introduced a laserinduced phase separation and adhesion method for fabricating conductive hydrogels consisting of pure poly(3,4-ethylenedioxythiophene):polystyrene sulfonate on polymer *** laser-induced phase separation and adhesion treated conducting polymers can be selectively transformed into conductive hydrogels that exhibit wet conductivities of 101.4 S cm^(−1)with a spatial resolution down to 5μ***,they maintain impedance and charge-storage capacity even after 1 h of *** micropatterned electrode arrays demonstrate their potential in long-term in vivo signal recordings,highlighting their promising role in the field of bioelectronics.

关键词： Laser processing Conductive hydrogels Stable interface Bio-interfacing electrodes Bioelectronic application

Development of a general circumferentially nonuniform heat transfer fuel rod model for subchannel analysis and application to helical fuel rods

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China Technological Sciences 2025年

作者： Junsen FU Junlong LI Xiaowen WANG Qi ZHANG Yao XIAO Hanyang GU School of Mechanical engineering Shanghai Jiao Tong University key laboratory of Nuclear power Systems and Equipment of the Ministry of Education Shanghai Jiao Tong University national key laboratory of Nuclear Reactor Technology Nuclear Power Institute of China State key laboratory of Nuclear power Safety Technology and Equipment Shanghai Jiao Tong University

The subchannel analysis method is one of the most crucial transient safety analysis methods in the thermal design of nuclear reactors. The nonuniformity of circumferential heat transfer is slight in conventional pressurized water reactor (PWR)cores, but it is significant in advanced reactors with wire-wrapped or helical fuel rods. Predicting circumferentially nonuniform heat transfer behavior can be challenging owing to the complex geometry of helical fuel rods. In this study, a general circumferentially nonuniform heat transfer fuel rod (GCNF) model is developed to predict the fuel central temperature and circumferential heat flux and wall temperature. This model incorporates a refined two-dimensional fuel conduction model and circumferential nonuniform shape factor, addressing the dual factors contributing to the circumferential nonuniformity of helical fuel rods. An empirical correlation for the nonuniform shape factor is developed based on the computational fluid dynamics (CFD) results, and it is implemented to the subchannel code. The newly developed model is applied to a helical fuel annulus and validated by comparing the prediction results with CFD data. The maximum wall temperature predicted by the code is 1.15°C lower than the value calculated through CFD. In terms of the heat flux, the maximum value at the inner corner is22 kW lower than that obtained from the CFD prediction. The accurate prediction of circumferentially nonuniform heat transfer in helical fuel, concerning the surface heat flux and cladding temperature, addresses existing shortcomings in helical fuel subchannel analysis methods. Additionally, the capability to predict the fuel central temperature is essential for the safety analysis to determine whether fuel rods are melting. The generality of the model framework allows it to be used for the prediction of circumferential nonuniform heat transfer behavior in other types of fuel assemblies.

关键词：

Advancements and Challenges in Organic–Inorganic Composite Solid Electrolytes for All‑Solid‑State Lithium Batteries

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第1期17卷 46-97页

作者： Xueyan Zhang Shichao Cheng Chuankai Fu Geping Yin Liguang Wang Yongmin Wu Hua Huo State key laboratory of Space power‑Sources School of Chemistry and Chemical EngineeringHarbin Institute of TechnologyHarbin 150001People’s Republic of China College of Chemical and Biological engineering Zhejiang UniversityHangzhou 310058People’s Republic of China State key laboratory of Space power-Sources 2965 Dongchuan RoadMinhang DistrictShanghai 200240People’s Republic of China

To address the limitations of contemporary lithium-ion batteries,particularly their low energy density and safety concerns,all-solid-state lithium batteries equipped with solid-state electrolytes have been identified as an up-and-coming *** the various SEs,organic–inorganic composite solid electrolytes(OICSEs)that combine the advantages of both polymer and inorganic materials demonstrate promising potential for large-scale ***,OICSEs still face many challenges in practical applications,such as low ionic conductivity and poor interfacial stability,which severely limit their *** review provides a comprehensive overview of recent research advancements in ***,the influence of inorganic fillers on the main functional parameters of OICSEs,including ionic conductivity,Li+transfer number,mechanical strength,electrochemical stability,electronic conductivity,and thermal stability are systematically *** lithium-ion conduction mechanism of OICSE is thoroughly analyzed and concluded from the microscopic ***,the classic inorganic filler types,including both inert and active fillers,are categorized with special emphasis on the relationship between inorganic filler structure design and the electrochemical performance of ***,the advanced characterization techniques relevant to OICSEs are summarized,and the challenges and perspectives on the future development of OICSEs are also highlighted for constructing superior ASSLBs.

关键词： Composite solid electrolytes Inorganic filler Interfacial stability Li-ion conduction mechanism Characterization techniques

维普期刊数据库

16.48% Efficient solution-processed CIGS solar cells with crystal growth and defects engineering enabled by Ag doping strategy

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 59-65页

作者： Mengyu Xu Shaocong Yan Ting Liang Jia Jia Shengjie Yuan Dongxing Kou Zhengji Zhou Wenhui Zhou Yafang Qi Yuena Meng Litao Han Sixin Wu key laboratory for Special Functional Materials of MOE National & Local Joint Engineering Research Centre for High-efficiency Display and Lighting Technology School of Nanoscience and Materials Engineering Henan University

Solution-processed Cu（In,Ga）Se2（CIGS） solar cells suffer from serious carrier recombination and power conversion efficiency（PCE） loss because of the poor film properties and easy formation of ***, we propose Ag&Se co-selenization strategy to enhance the crystallization and passivate harmful defects of the CIGS films. The formation of Ag-Se phase during the selenization process enables the formation of large grains and suppresses the deep level defects. It is found that Ag doping can enlarge the depletion region width, lower the Urbach energy and prolong the carrier lifetime. As a result, a champion solution-processed CIGS solar cell presents a high efficiency of 16.48% with the highly improved opencircuit voltage（VOC） of 662 m V and fill factor（FF） of 75.8%. This work provides an efficient strategy to prepare high quality solution-processed CIGS films for high-performance CIGS solar cells.

关键词： Cell engineering

Boosting bidirectional sulfur conversion enabled by introducing boron-doped atoms and phosphorus vacancies in Ni2P for lithium-sulfur batteries

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 760-769页

作者： Lin Peng Yu Bai Hang Li Meixiu Qu Zhenhua Wang Kening Sun Advanced Research Institute of Multidisciplinary Science Beijing Institute of Technology Beijing key laboratory of Chemical power Source and Green Catalysis School of Chemistry and Chemical Engineering Beijing Institute of Technology

Lithium-sulfur （Li-S） batteries have gained great attention due to the high theoretical energy density and low cost,yet their further commercialization has been obstructed by the notorious shuttle effect and sluggish redox ***,we supply a strategy to optimize the electron structure of Ni2P by concurrently introducing B-doped atoms and P vacancies in Ni2P （Vp-B-Ni2P）,thereby enhancing the bidirectional sulfur *** study indicates that the simultaneous introduction of B-doped atoms and P vacancies in Ni2P causes the redistribution of electron around Ni atoms,bringing about the upward shift of d-band center of Ni atoms and effective d-p orbital hybridization between Ni atoms and sulfur species,thus strengthening the chemical anchoring for lithium polysulfides （LiPSs） as well as expediting the bidirectional conversion kinetics of sulfur ***,theoretical calculations reveal that the incorporation of B-doped atoms and P vacancies in Ni2P selectively promotes Li2S dissolution and nucleation ***,the Li-S batteries with Vp-B-Ni2P-separators present outstanding rate ability of 777 m A h g-1at 5 C and high areal capacity of 8.03 mA h cm-2under E/S of 5μL mg-1and sulfur loading of 7.20 mg *** work elucidates that introducing heteroatom and vacancy in metal phosphide collaboratively regulates the electron structure to accelerate bidirectional sulfur conversion.

关键词： Lithium sulfur batteries

Unraveling post-growth mechanisms of monolayer CsPbBr3 nanocubes:Laser-enhanced transformations and cathodoluminescence-electron microscopy correlations

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 146-156页

作者： Mingxing Li Xiaoge Wang Xiaofan Cao Zhiqun He Chunjun Liang Mingxing Chen Jing Ju Fangtian You key laboratory of Luminescence and Optical Information Ministry of Education Institute of Optoelectronic Technology Beijing Jiaotong University Beijing national laboratory for Molecular Sciences (BNLMS) College of Chemistry and Molecular Engineering Peking University

Lead-halide perovskite nanoparticles（LHP NPs） are highly promising materials for next-generation displays and solid-state lighting due to their exceptional optical properties. However, their inherent instability presents a significant challenge. Recent advances have demonstrated that optoelectronic devices based on monolayer nanoparticle films exhibit both high luminescence efficiency and long-term *** research demonstrates that mobility limitations and anisotropic alignments in CsPbBr3nanocube monolayer films are key to their stabilization, hindering spontaneous growth through face-to-face fusion and resulting in the formation of connecting necks in a diagonal direction. Introducing laser irradiation confirmed this by significantly accelerating nanocubes growth, increasing mobility, and enhancing local structural ordering, leading to larger and more regularly shaped nanosheets. Fourier transform infrared spectroscopy and energy dispersive spectroscopy line-scan analyses indicated that laser irradiation did not disrupt the ligand structure. Transmission electron microscopy and correlative cathodoluminescence electron microscopy revealed the effects of post-growth and heterogeneous structures, including enhanced luminescence and inhomogeneous intensity in the nanosheets. These findings deepen the understanding of the post-growth mechanism of monolayer nanoparticles and the structure-emission correlation and highlight the unique role of laser irradiation in directing the formation of well-defined and regular nanostructures.

关键词： Energy dispersive spectroscopy

Interfacial Zn2+-solvation regulator towards reversible and stable Zn anode

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 684-692页

作者： Miao Zhou Xiongbin Luo Hang Li Shan Guo Zhuang Tong Xiaotao Zhou Xu Li Zhaohui Hou Shuquan Liang Guozhao Fang College of Mechanical engineering Key Laboratory of Hunan Province for Advanced Carbon-based Functional Materials Hunan Institute of Science and Technology School of Materials Science and engineering Key Laboratory of Electronic Packaging and Advanced Functional Materials of Hunan Province Central South University College of Materials and Metallurgy Guizhou University national Energy Metal Resources and New Materials key laboratory Central South University

Aqueous zinc-ion batteries （AZIBs） are fundamentally challenged by the instability of the electrode/electrolyte interface,predominantly due to irreversible zinc （Zn） deposition and hydrogen ***,the intricate mechanisms behind the electrochemical discrepancies induced by interfacial Zn2+-solvation and deposition behavior demand comprehensive *** molecules endowed with special functional groups （such as hydroxyl,carboxyl,etc.） have the potential to significantly optimize the solvation structure of Zn2+and regulate the interfacial electric double layer （EDL）.By increasing nucleation overpotential and decreasing interfacial free energy,these functional groups facilitate a lower critical nucleation radius,thereby forming an asymptotic nucleation model to promote uniform Zn ***,this study presents a pioneering approach by introducing trace amounts of n-butanol as solvation regulators to engineer the homogenized Zn （H-Zn） anode with a uniform and dense *** interfacial reaction and structure evolution are explored by in/ex-situ experimental techniques,indicating that the H-Zn anode exhibits dendrite-free growth,no by-products,and weak hydrogen evolution,in sharp contrast to the bare ***,the H-Zn anode achieves a remarkable Zn utilization rate of approximately 20% and simultaneously sustains a prolonged cycle life exceeding 500 ***,the H-Zn//NH4V4O10（NVO） full battery showcases exceptional cycle stability,retaining 95.04%capacity retention after 400 cycles at a large current density of 5 A *** study enlightens solvation-regulated additives to develop Zn anode with superior utilization efficiency and extended operational lifespan.

关键词： Solvation

Electrochemical conversion of methane to bridge the gap in the artificial carbon cycle

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 286-308页

作者： Yuhao Peng Yuefeng Song Ihar Razanau Juanxiu Xiao Wei Xiao Di Hu Guoxiong Wang College of Chemistry and Molecular Sciences Hubei Key Laboratory of Electrochemical Power Sources Wuhan University State key laboratory of Catalysis Dalian National Laboratory for Clean Energy iChEM (Collaborative Innovation Center of Chemistry for Energy Materials) Dalian Institute of Chemical Physics Chinese Academy of Sciences laboratory of Physical-Chemical Technologies SSPA Scientific and Practical Materials Research Centre of NAS of Belarus State key laboratory of Marine Resources Utilization in South China Sea Collaborative Innovation Center of Marine Science and Technology School of Marine Science and Engineering Hainan University Department of Chemical and Environmental engineering University of Nottingham Ningbo China

Methane, an abundant one-carbon（C1） resource, is extensively used in the industrial production of vital fuels and value-added chemicals. However, current industrial methane conversion technologies are energy-and carbon-intensive, mainly due to the high activation energy required to break the inert C–H bond, low selectivity, and problematic side reactions, including CO2emissions and coke deposition. Electrochemical conversion of methane（ECM） using intermittent renewable energy offers an attractive solution, due to its modular reactor design and operational flexibility across a broad spectrum of temperatures and pressures. This review emphasizes conversion pathways of methane in various reaction systems, highlighting the significance and advantages of ECM in facilitating a sustainable artificial carbon cycle. This work provides a comprehensive overview of conventional methane activation mechanisms and delineates the complete pathways of methane conversion in electrolysis contexts. Based on surface/interface chemistry, this work systematically analyzes proposed reaction pathways and corresponding strategies to enhance ECM efficiency towards various target products, including syngas, hydrocarbons, oxygenates, and advanced carbon materials. The discussion also encompasses opportunities and challenges for the ECM process, including insights into ECM pathways, rational electrocatalyst design, establishment of benchmarking protocols, electrolyte engineering, enhancement of CH4conversion rates, and minimization of CO2emission.

关键词： Activation energy

High-resolution imaging through dynamic scattering media: Iterative optimization based on polarimetric characteristics

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Science China Technological Sciences 2025年第1期 82-84页

作者： Meng XIANG Kai DENG Tianyu WANG Jinpeng LIU Xue DONG Teli XI Fei LIU Xiaopeng SHAO School of Optoelectronic engineering Xidian University Xi'an key laboratory of Computational Imaging national key laboratory of Infrared Detection Technologies

High-resolution imaging through randomly dynamic scattered fields and highly scattered walls is an extensively sought-after capability with potential applications in various fields such as underwater imaging, biomedical imaging, and seeing through fog. Numerous methods have been proposed to unscramble object information from degraded scattered images, resulting in considerable improvements in image contrast in degraded scenarios [1].

关键词：