检索结果-南通市图书馆

Journal of Palaeogeography 2024年第1期13卷 80-91页

作者： Mehdi Sarfi Mohsen Yazdi-Moghadam School of Earth Sciences Damghan UniversityDamghan ***Iran national iranian oil company Exploration Directorate Sheikh Bahaie SquareTehran ***Iran

The shallow marine carbonates of the upper Oligocene Qom Formation yielded several occurrences of the foraminiferan genus Neoplanorbulinella Matsumaru. Neoplanorbulinella saipanensis Matsumaru has so far been recorded from the late Eocene-early Miocene of Japan and late Oligocene of NE Italy whereas N. malatyaensis Gedik is only reported from the Oligocene from its type locality in the Malatya Basin, eastern Turkey. The new records reported here from the Qom Formation indicate that both species occur in the Dobaradar section, ca. 10 km south of the city of Qom in North-Central Iran. The palaeogeographic distribution of these two species therefore has to be extended as far as the palaeolongitude of current Central Iran.The accompanying larger benthic foraminifers, including Miogypsinoides complanatus(Schlumberger),M. formosensis Yabe and Hanzawa, Spiroclypeus margaritatus(Schlumberger), Operculina complanata(Defrance), and Risananeiza pustulosa Boukhary et al., indicate the upper Chattian SBZ 23 Zone. The coexistence of the N. saipanensis and N. malatyaensis points to suitable palaeobiogeographic conditions of Central Iran to host Western and Eastern Tethyan taxa.

关键词： Larger foraminifers Planorbulinids Biostratigraphy Qom Formation Central Iran

Stratigraphy of the Alveolina elliptica group from the Middle Eocene of Iran:Calibration with calcareous nannofossils biozones and description of Alveolina ozcani n. sp.

在线全文

学校读者我要写书评

暂无评论

Journal of Palaeogeography 2024年第1期13卷 54-79页

作者： Mehdi Hadi Lorenzo Consorti Ali Bahrami Mohammad Parandavar Saeed Khorramdel Department of Geology Faculty of SciencesUniversity of IsfahanIsfahanIran Institute of Marine Sciences(ISMAR-CNR) Area Science ParkBasovizza34149 TriesteItaly national iranian oil company Exploration DirectorateSheikh Bahaei SquareTehranIran Department of Geology Faculty of ScienceFerdowsi University of MashhadMashhadIran

Precise taxonomy and the chronostratigraphic calibration of the Middle Eocene Alveolina from Central Iran is here undertaken from the Chah-Talkh section of the southern Sabzevar region(Central Iran). We have identified Alveolina kieli, Alveolina stercusmuris and Alveolina nuttalli along with the new species Alveolina ozcani n. sp. that we include into the Alveolina elliptica group. We have also found Nummulites uroniensis, Nummulites obesus and Nummulites cf. verneuili and associated calcareous nannofossils that look reliable to make thoughtful correlations with the Shallow Benthic Zones(SBZ). The foraminiferal biostratigraphy suggests an assignment to the upper part of the lower Lutetian-lower part of the middle Lutetian,SBZ13(Middle Eocene), further strengthened through the identification of the calcareous nannofossil NP14b-NP15b or CNE8-CNE10 biozones, providing a solid correlation with the global stratigraphic standards.

关键词： Alveolina Calcareous nannofossil Central neo-tethys Central Iran Middle Eocene Biostratigraphy

Developing a phenomenological model to simulate single and mixed scale formation during flow in porous media:Coupling a salt precipitation model with an ion transport equation under dynamic conditions

在线全文

学校读者我要写书评

暂无评论

Petroleum Research 2024年第1期9卷 17-36页

作者： Erfan Hosseini Dana Mohammad Nazar Negar Hosseini Mohammad Sarmadivaleh Exploration Directorate National Iranian Oil Company(NIOC)TehranIran Institute of Physical Chemistry and Polymer Physics Leibniz Institute of Polymer Research DresdenDresdenGermany Department of Petroleum Engineering Islamic Azad University(IAU)IlamIran WA School of Mines:Minerals Energy and Chemical EngineeringCurtin UniversityPerthWestern AustraliaAustralia

Water flooding and pressure maintenance are recommended to improve oil recovery practices after low recovery of petroleum reservoirs occurs during primary production.Salt crystal formation is a frequent occurrence when using these techniques.Several experimental,numerical,and theoretical studies have been done on the mechanisms underlying scaling and permeability reduction in porous media;however,there has not been a satisfactory model developed.This study developed a phenomenological model to predict formation damage caused by salt deposition.Compared with existing models,which provide a scaling tendency,the proposed model predicts the profile of scale deposition.The salt precipitation model simulates reactive fluid flow through porous media.A thermodynamic,kinetic,and flow hydrodynamic model was developed and coupled with the ion transport equation to describe the movement of ions.Further,a set of carefully designed dynamic experiments were conducted and the data were compared with the model predictions.Model forecasts and experimental data were observed to have an average absolute error(AAE)ranging from 0.68%to 5.94%,which indicates the model's suitability.

关键词： Improved oil recovery Water flooding Formation damage Scaling tendency Salt precipitation

CO_(2)flooding in shale oil reservoir with radial borehole fracturing for CO_(2)storage and enhanced oil recovery

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第1期21卷 519-534页

作者： Jia-Cheng Dai Tian-Yu Wang Jin-Tao Weng Kang-Jian Tian Li-Ying Zhu Gen-Sheng Li State Key Laboratory of Petroleum Resources and Prospecting China University of PetroleumBeijing102249China China national oil and Gas Exploration and Development company Limited Beijing100034China

This study introduces a novel method integrating CO_(2)flooding with radial borehole fracturing for enhanced oil recovery and CO_(2)underground storage,a solution to the limited vertical stimulation reservoir volume in horizontal well fracturing.A numerical model is established to investigate the production rate,reservoir pressure field,and CO_(2)saturation distribution corresponding to changing time of CO_(2)flooding with radial borehole fracturing.A sensitivity analysis on the influence of CO_(2)injection location,layer spacing,pressure difference,borehole number,and hydraulic fractures on oil production and CO_(2)storage is conducted.The CO_(2)flooding process is divided into four stages.Reductions in layer spacing will significantly improve oil production rate and gas storage capacity.However,serious gas channeling can occur when the spacing is lower than 20 m.Increasing the pressure difference between the producer and injector,the borehole number,the hydraulic fracture height,and the fracture width can also increase the oil production rate and gas storage rate.Sensitivity analysis shows that layer spacing and fracture height greatly influence gas storage and oil production.Research outcomes are expected to provide a theoretical basis for the efficient development of shale oil reservoirs in the vertical direction.

关键词： Shale oil Radial borehole fracturing Embedded discrete fracture model Enhanced oil recovery Carbon storage

Effect of fracture fluid flowback on shale microfractures using CT scanning

在线全文

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第2期16卷 426-436页

作者： Jiale He Zhihong Zhao Yiran Geng Yuping Chen Jianchun Guo Cong Lu Shouyi Wang Xueliang Han Jun Zhang State Key Laboratory of oil and Gas Reservoir Geology and Exploitation Southwest Petroleum UniversityChengdu610500China Key Laboratory of Thermo-Fluid Science and Engineering of Ministry of Education School of Energy and Power EngineeringXi’an Jiaotong UniversityXi’an710049China Drilling Test Engineering Department of Longdong oil and Gas Development company Changqing OilfieldPetroChina Company LimitedQingyang745000China Tight oil and Gas Exploration and Development Project Department PetroChina Southwest Oil and Gas Field CompanyChengdu610056China No.11 oil Production Plant Changqing Oilfield CompanyPetroChina Company LimitedQingyang745000China

The field data of shale fracturing demonstrate that the flowback performance of fracturing fluid is different from that of conventional reservoirs,where the flowback rate of shale fracturing fluid is lower than that of conventional reservoirs.At the early stage of flowback,there is no single-phase flow of the liquid phase in shale,but rather a gas-water two-phase flow,such that the single-phase flow model for tight oil and gas reservoirs is not applicable.In this study,pores and microfractures are extracted based on the experimental results of computed tomography(CT)scanning,and a spatial model of microfractures is established.Then,the influence of rough microfracture surfaces on the flow is corrected using the modified cubic law,which was modified by introducing the average deviation of the microfracture height as a roughness factor to consider the influence of microfracture surface roughness.The flow in the fracture network is simulated using the modified cubic law and the lattice Boltzmann method(LBM).The results obtained demonstrate that most of the fracturing fluid is retained in the shale microfractures,which explains the low fracturing fluid flowback rate in shale hydraulic fracturing.

关键词： Shale Flowback of fracturing fluid Microfracture Lattice Boltzmann method(LBM)

Differences and identification on multi-time hydrocarbon generation of carboniferous-permian coaly source rocks in the Huanghua Depression,Bohai Bay Basin

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第2期21卷 765-776页

作者： Jin-Jun Xu Xian-Gang Cheng Shu-Nan Peng Jun-Cai Jiang Qi-Long Wu Da Lou Fu-Qi Cheng La-Mei Lin national Key Laboratory of Deep oil and Gas China University of Petroleum(East China)Qingdao 266580ShandongChina PetroChina Dagang oilfield company Tianjin300280China

Coal is a solid combustible mineral,and coal-bearing strata have important hydrocarbon generation potential and contribute to more than 12%of the global hydrocarbon resources.However,the deposition and hydrocarbon evolution process of ancient coal-bearing strata is characterized by multiple geological times,leading to obvious distinctions in their hydrocarbon generation potential,geological processes,and production,which affect the evaluation and exploration of hydrocarbon resources derived from coaly source rocks worldwide.This study aimed to identify the differences on oil-generated parent macerals and the production of oil generated from different coaly source rocks and through different oil generation processes.Integrating with the analysis of previous tectonic burial history and hydrocarbon generation history,high-temperature and high-pressure thermal simulation experiments,organic geochemistry,and organic petrology were performed on the Carboniferous-Permian(C-P)coaly source rocks in the Huanghua Depression,Bohai Bay Basin.The oil-generated parent macerals of coal's secondary oil generation process(SOGP)were mainly hydrogen-rich collotelinite,collodetrinite,sporinite,and cutinite,while the oil-generated parent macerals of tertiary oil generation process(TOGP)were the remaining small amount of hydrogen-rich collotelinite,sporinite,and cutinite,as well as dispersed soluble organic matter and unexhausted residual hydrocarbons.Compared with coal,the oil-generated parent macerals of coaly shale SOGP were mostly sporinite and cutinite.And part of hydrogen-poor vitrinite,lacking hydrocarbon-rich macerals,and macerals of the TOGP,in addition to some remaining cutinite and a small amount of crude oil and bitumen from SOGP contributed to the oil yield.The results indicated that the changes in oil yield had a good junction between SOGP and TOGP,both coal and coaly shale had higher SOGP aborted oil yield than TOGP starting yield,and coaly shale TOGP peak oil yield was lower than SOGP peak oil yield.There were significa

关键词： Thermal simulation Multi-time oil generation processes Coaly source rock Carboniferous-permian Huanghua Depression

Combined use of fly ash and silica to prevent the long-term strength retrogression of oil well cement set and cured at HPHT conditions

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2024年第2期21卷 1122-1134页

作者： Guo-Dong Cheng Xue-Yu Pang Jin-Sheng Sun Zheng-Song Qiu Chuang-Chuang Wang Jian-Kun Qin Ning Li School of Petroleum Engineering China University of Petroleum(East China)Qingdao266580ShandongChina national Key Laboratory of Deep oil and Gas China University of Petroleum(East China)Qingdao266580ShandongChina oil and Gas Engineering Research Institute(Tarim oilfield company) China National Petroleum CorporationTarim841000XinjiangChina

The long-term strength retrogression of silica-enriched oil well cement poses a significant threat to wellbore integrity in deep and ultra-deep wells, which is a major obstacle for deep petroleum and geothermal energy development. Previous attempts to address this problem has been unsatisfactory because they can only reduce the strength decline rate. This study presents a new solution to this problem by incorporating fly ash to the traditional silica-cement systems. The influences of fly ash and silica on the strength retrogression behavior of oil well cement systems directly set and cured under the condition of 200°C and 50 MPa are investigated. Test results indicate that the slurries containing only silica or fly ash experience severe strength retrogression from 2 to 30 d curing, while the slurries containing both fly ash and silica experience strength enhancement from 2 to 90 d. The strength test results are corroborated by further evidences from permeability tests as well as microstructure analysis of set cement. Composition of set cement evaluated by quantitative X-ray diffraction analyses with partial or no known crystal structure(PONKCS) method and thermogravimetry analyses revealed that the conversion of amorphous C-(A)-S-H to crystalline phases is the primary cause of long-term strength retrogression.The addition of fly ash can reduce the initial amount of C-(A)-S-H in the set cement, and its combined use with silica can prevent the crystallization of C-(A)-S-H, which is believed to be the working mechanism of this new admixture in improving long-term strength stability of oil well cement systems.

关键词： Fly ash Long-term strength retrogression High temperature Quantitative X-ray diffraction(QXRD) Partial or no known crystal structure(PONKCS)

Analysis of mechanical strengths of extreme line casing joint considering geometric, material, and contact nonlinearities

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2024年第3期21卷 1992-2004页

作者： Ji-Yun Zhang Chi Peng Jian-Hong Fu Quan Cao Yu Su Jian-Yun Pang Zi-Qiang Yu Petroleum Engineering School Southwest Petroleum University Engineering Technology Research Institute of CNPC Southwest oil and Gas Field company

To address the challenges associated with difficult casing running, limited annular space, and poor cementing quality in the completion of ultra-deep wells, the extreme line casing offers an effective solution over conventional casings. However, due to its smaller size, the joint strength of extreme line casing is reduced, which may cause failure when running in the hole. To address this issue, this study focuses on the CST-ZT Φ139.7 mm × 7.72 mm extreme line casing and employs the elastic-plastic mechanics to establish a comprehensive analysis of the casing joint, taking into account the influence of geometric and material nonlinearities. A finite element model is developed to analyze the forces and deformations of the extreme line casing joint under axial tension and external collapse load. The model investigates the stress distribution of each thread tooth subjected to various tensile forces and external pressures. Additionally, the tensile strength and crushing strength of the extreme line casing joint are determined through both analytical and experimental approaches. The findings reveal that, under axial tensile load, the bearing surface of each thread tooth experiences uneven stress, with relatively high equivalent stress at the root of each thread tooth. The end thread teeth are valuable spots for failure. It is observed that the critical fracture axial load of thread decreases linearly with the increase of thread tooth sequence. Under external pressure, the circumferential stress is highest at the small end of the external thread, leading to yield deformation. The tensile strength of the joint obtained from the finite element model exhibits a relative error of less than 7% compared to the analytical and experimental values,proving the reliability of the finite element model. The tensile strength of the joint is 3091.9 k N.Moreover, in terms of anti-collapse capability, the joints demonstrate higher resistance to collapse compared to the casing body, which is consistent with the test results where the pip

关键词： Extreme line casing Elastic-plastic mechanics Finite element analysis Tensile strength Collapse strength

Characteristics of transfer zones under the influence of preexisting faults and regional stress transformation:Wenchang A subsag,Zhujiang River Mouth Basin,northern South China Sea

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Oceanology and Limnology 2024年第3期42卷 744-759页

作者： Wei LI Mingyue CAO Meifang MENG Caiwei FAN Hui LI Jia LI Wanqiu WU Ruiqing QIN Xingan LI Yiming LIU State Key Laboratory of Deep oil and Gas China University of Petroleum(East China)Qingdao 266580China School of Geosciences China University of Petroleum(East China)Qingdao 266580China Zhanjiang Branch China National Offshore Oil Corporation CompanyZhanjiang 524057China

A transfer zone in rift basins preserves important information on regional tectonic evolution and plays significant roles in hydrocarbon accumulation.Based on the systematic analysis of 3D seismic data and hydrocarbon accumulation conditions,the geometry,kinematics,and reservoir control of a large synthetic overlapping transfer zone in the south of the Wenchang A subsag in the Zhujiang(Pearl)River Mouth basin were investigated.Results indicate that the development and evolution of the transfer zone was controlled by the interaction between pre-existing faults and regional stress transformation.The intense rifting of the main faults of the transfer zone controlled the development of source rocks and faultcontrolled slope break paleogeomorphology.The strike-slip overprint since the Oligocene is conducive to the formation of a large-scale fault-anticline trap,and the secondary faults in the transfer zone contribute to the hydrocarbon transportation.The conjugate intersection area of the NE-and NW-trending faults offers more opportunity for hydrocarbon migration and accumulation.

关键词： transfer zone pre-existing fault regional stress transformation Cenozoic Wenchang A Subsag Zhujiang(Pearl)River Mouth Basin

A phase-field model for simulating the propagation behavior of mixed-mode cracks during the hydraulic fracturing process in fractured reservoirs

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第5期45卷 911-930页

作者： Dan ZHANG Liangping YI Zhaozhong YANG Jingqiang ZHANG Gang CHEN Ruoyu YANG Xiaogang LI State Key Laboratory of oil and Gas Reservoir Geology and Exploitation Southwest Petroleum UniversityChengdu 610500China State Key Laboratory of oil and Gas Reservoir Geology and Exploitation Chengdu University of TechnologyChengdu 610059China Tarim oilfield company PetroChinaBayingolin Mongolian Autonomous Prefecture 841000Xinjiang Uygur Autonomous RegionChina Wuqi oil Production Plant Shaanxi Yanchang PetroleumXi'an 716000China Exploration Division of PetroChina Southwest oil and Gasfield company Chengdu 610041China

A novel phase-field model for the propagation of mixed-mode hydraulic fractures,characterized by the formation of mixed-mode fractures due to the interactions between fluids and solids,is proposed.In this model,the driving force for the phase field consists of both tensile and shear components,with the fluid contribution primarily manifesting in the tension driving force.The displacement and pressure are solved simultaneously by an implicit method.The numerical solution's iterative format is established by the finite element discretization and Newton-Raphson(NR)iterative methods.The correctness of the model is verified through the uniaxial compression physical experiments on fluid-pressurized rocks,and the limitations of the hydraulic fracture expansion phase-field model,which only considers mode I fractures,are revealed.In addition,the influence of matrix mode II fracture toughness value,natural fracture mode II toughness value,and fracturing fluid injection rate on the hydraulic fracture propagation in porous media with natural fractures is studied.

关键词： mixed-mode crack hydraulic fracturing poro-elasticity phase-field method(PFM)