检索结果-南通市图书馆

Fabrication of corrosion inhibiting microcapsules functional coating and their high-efficiency corrosion resistance

在线全文

学校读者我要写书评

暂无评论

Rare metals 2024年第2期43卷 842-848页

作者： Hao-Ran Yun Lu Lu Xue-Long Hao Xing-Xiang Zhang School of Material Science and engineering Tiangong UniversityTianjin300387China national center of Analysis and Testing for nonferrous metals and Electronic Materials General Research Institute for Nonferrous MetalsBeijing100088China Guobiao(Beijing)Testing&Certification Co. Ltd.Beijing101407China

Benzotriazole(BTA)was loaded into calcium carbonate microsphere shell by self-assembly method and a new type of high-efficiency corrosion inhibiting microcapsules(CIMs)were fabricated,which were added and dispersed into epoxy resin coating to obtain a new corrosion resistance functional *** corrosion inhibition effect of benzotriazole on aluminum alloy matrix was verified by polarization curve *** effectiveness of the CIMs and their loading capacity on inhibitor were evaluated by scanning electron microscope,laser confocal Raman spectroscopy together with thermogravimetric analysis.

关键词： corrosion coating resistance

Microstructure evolution and strengthening mechanism of high -performance powder metallurgy TA15 titanium alloy by hot rolling

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第6期31卷 1426-1436页

作者： Ying Gao Ce Zhang Jiazhen Zhang Xin Lu Beijing Advanced Innovation center for Materials Genome engineering State Key Laboratory for Advanced Metals and MaterialsInstitute for Advanced Ma-terials and TechnologyUniversity of Science and Technology BeijingBeijing 100083China national engineering research center for Advanced Rolling technology National Engineering Research Center for Flat Rolling EquipmentInstitute of Engin-eering TechnologyUniversity of Science and Technology BeijingBeijing 100083China

Hot deformation of sintered billets by powder metallurgy(PM)is an effective preparation technique for titanium alloys,which is more significant for high-alloying *** this study,Ti–6.5Al–2Zr–Mo–V(TA15)titanium alloy plates were prepared by cold press-ing sintering combined with high-temperature hot *** microstructure and mechanical properties under different process paramet-ers were *** microscope,electron backscatter diffraction,and others were applied to characterize the microstructure evolution and mechanical properties strengthening *** results showed that the chemical compositions were uniformly dif-fused without segregation during sintering,and the closing of the matrix craters was accelerated by increasing the sintering *** block was hot rolled at 1200℃ with an 80%reduction under only two passes without *** strength and elongation of the plate at 20–25℃ after solution and aging were 1247 MPa and 14.0%,respectively,which were increased by 24.5%and 40.0%,respect-ively,compared with the as-sintered alloy at 1300℃.The microstructure was significantly refined by continuous dynamic recrystalliza-tion,which was completed by the rotation and dislocation absorption of the substructure surrounded by low-angle grain *** hot rolling combined with heat treatment,the strength and plasticity of PM-TA15 were significantly improved,which resulted from the dense,uniform,and fine recrystallization structure and the synergistic effect of multiple slip systems.

关键词： elemental powder powder metallurgy titanium alloy hot rolling strength and plasticity

The structure–activity relationships of Rh/CeO_(2)-ZrO_(2) catalysts based on Rh metal size effect in the three-way catalytic reactions

在线全文

学校读者我要写书评

暂无评论

Nano research 2024年第8期17卷 6870-6878页

作者： Dongming Chen Weixin Zhao Zihao Xu Zheng Zhao Juanyu Yang Yongke Hou Yongqi Zhang Zongyu Feng Meisheng Cui Xiaowei Huang national engineering research center for Rare Earth Grirem Advanced Materials Co.Ltd.Beijing 100088China Grirem Hi-Tech Co. Ltd.Sanhe 065201China General research Institute for nonferrous metals Beijing 100088China

With the continuous tightening of automotive emission regulations and the increasing promotion of energy-efficient hybrid vehicles,new challenges have arisen for the low-temperature performance of three-way catalysts(TWCs).To guide the design of next-generation TWCs,it is essential to further develop our understanding of the relationships between microstructure and catalytic ***,Rh/CeO_(2)–ZrO_(2) catalysts were synthesized with different Rh metal dispersion by using a combination of the wet impregnation method and reduction *** catalysts included Rh single-atom catalysts,cluster catalysts,and nanoparticle *** results showed that the Rh nanoparticle catalyst,with an average size of 1.9 nm,exhibited superior three-way catalytic performance compared to the other *** on the catalytic activity in a series of simple reaction atmospheres such as CO+O_(2),NO+CO,and hydrocarbons(HCs)+O_(2) and operando infrared spectroscopy,we found that metallic Rh sites on Rh nanoparticles are the key factor responsible for the low-temperature catalytic performance.

关键词： Rh/CeO_(2)-ZrO_(2) catalyst Rh metal size effect Rh nanoparticles three-way catalytic performance

Effect of phase transition during roasting of Mountain Pass rare earth concentrate on leaching efficiency of rare earths

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第2期42卷 409-414,I0006页

作者： Yanyan Zhao Xu Sun Deliang Meng Xiangsheng Liu Qiang Zhong Zongyu Feng national engineering research center for Rare Earth Grirem Advanced Materials Co.Ltd.Beijing0088China Rare Earth Functional Materials(Xiong'an)Innovation center Co. Ltd.Xiongan071700China General research Institute for nonferrous metals Beijing100088China

To find a greener and more economical approach for treating the Mountain Pass rare earth concentrate(MPREC),a novel "Combination Method",including the processes of oxidizing roasting,HCI leaching and sulfuric acid roasting,is proposed in this *** this paper,the effect of phase transition behavior in hydrochloric acid leaching during oxidative roasting at 450-600℃ was *** roasting,the bastnasite in MPREC is decomposed into CeLa_(2)O_(3)F_(3) and(Ce_(0.33),La_(0.33),Ca_(0.33))O_(1.5).As the CeLa_(2)O_(3)F_(3) phase has the fluorine-fixation effect,the generated CeLa_(2)O_(3)F_(3) phase can not be dissolved by HCI after roasting at 500 and 550℃,but it can be decomposed by HCI after roasting at over 600℃,resulting in the improvement of the leaching rate of total F *** maximum leaching efficiency of rare earth elements(REEs) can reach 70.32 wt% at the roasting temperature of 550℃.After roasting at over 600℃,some F^-ions in the solution combined with RE^(3+) to form REF_(3) precipitate and enter the leaching residue,and the others are in the form of [CeF_(3)]^+ in the leaching solution during leaching,therefore,the leaching efficiency of non-ce rium REEs decreases while that of cerium element *** work provides basic research for optimizing the actual production process of MPREC.

关键词： Mountain pass rare earth mine Roasting Phase change Rare earths

Selective leaching of calcium from mechanically activated mixed rare earth concentrate

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第6期42卷 1149-1156,I0006页

作者： Jiang Liu Bingxue Chen Yuanqi Feng Yijun Cao Yukun Huang Yuan Shi Meng Li Zhongyuan Critical metals Laboratory School of Chemical EngineeringZhengzhou UniversityZhengzhou450001China State Key Laboratory of Advanced Processing and Recycling of nonferrous metals Lanzhou University of TechnologyLanzhou730050China

The loss of rare earths(REs)takes place during the pre-decalcification process of mixed rare earth *** an effort to reduce such RE loss,a novel idea to improve the leaching selectivity of Ca to REs by applying selective mechanical activation was ***,regarding the key minerals affecting the leaching selectivity of Ca to REs,the differences in the mechanical activation behaviors of CaF_(2) and REFCO_(3) were studied,and we find that the lattice strain of CaF_(2) increases from 0.21%to 0.42%,whereas that of REFCO_(3) increases from 0.31%to 0.40%.Notably,CaF_(2) demonstrates a larger lattice strain than REFCO_(3),indicating greater mechanical activation energy storage and higher leaching ***,the HCl leaching process was studied.A significant leaching selectivity of Ca to REs,from 21.6 to 35.1,is achieved through mechanical *** Ca leaching rate reaches 80.7%when the RE loss is 2.3%in the activated *** study provides an novel approach for achieving selective extraction of specific components via mechanical activation pretreatment.

关键词： Mixed rare earth concentrate Pre-decalcification Selective mechanical activation Selective leaching

Efficient removal of Al(Ⅲ)and P507 from high concentration MgCl_(2)solution based on in-situ reaction strategy

在线全文

学校读者我要写书评

暂无评论

Transactions of nonferrous metals Society of China 2024年第9期34卷 3042-3053页

作者： Qiang WANG Meng WANG Zong-yu FENG Yong-qi ZHANG Xiao-wei HUANG Xiang-xin XUE national engineering research center for Rare Earth GRIREM Advanced Materials Co.Ltd.Beijing 100088China School of Metallurgy Northeastern UniversityShenyang 110819China General research Institute for nonferrous metals Beijing 100088China GRIMAT engineering Institute Co. Ltd.Beijing 101407China

For a highly efficient recycling of a wastewater containing a high concentration of MgCl_2,Al(Ⅲ)and P507 were scheduled to be removed in *** this study,the in-situ removal of Al(Ⅲ)and P507 from a high concentration MgCl_(2)solution at different pH values and Al/P molar ratios was *** results showed that P507 formed organic complexes of Al_x(OH)_y~(Z+)-P507 at pH of *** pH of 4.0-5.0,Al(Ⅲ)precipitated and transferred into Al(OH)_(3)with a flocculent amorphous *** sites on the Al(OH)_(3)surface enhanced the removal efficiency of *** pH of 6.0-6.5,Al(Ⅲ)and Mg(Ⅱ)formed layered crystalline Al(OH)_(3)and MgAl_2(OH)_(8with)small pore channels and fewer active sites,resulting in a reduced removal efficiency of *** the Al/P molar ratio exceeded 13 and the pH was between 4.0 and 5.0,the removal rates of both Al(Ⅲ)and P507 were higher than98%,while the concentration loss of Mg(Ⅱ)was only 0.2%-0.9%.

关键词： in-situ removal Al(III) P507 MgCl2 solution pH Al/P molar ratio

AB_(2)-type rare earth-based compounds with C-15 structure:Looking for reversible hydrogen storage materials

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第5期42卷 803-816,I0001页

作者： Hao Shen Junxian Zhang Valerie Paul-Boncour Ping Li Zhinian Li Yuanfang Wu Lijun Jiang national engineering research center of nonferrous metals Materias and Products for New Energy GRINM Group Co.LtdBeijing00088China Univ Paris Est Creteil CNRSICMPEUMR 71822 rue Henri Dunant94320ThiaisFrance Institute for Advanced Materials and technology University of Science and TechnologyBeijing100083China GRIMAT engineering Institute Co. Ltd.Beijing101407China

AB_(2)-type(A=rare earth,B=transition metal)intermetallic compounds with C15 structure can easily absorb large amount of hydrogen,showing their potential use as hydrogen storage *** crucial problem hindering their application is hydrogen induced amorphization(HIA),which leads to the irreversible hydrogen sorption *** stability of the AB_2 Laves phase compounds,the structural properties,the hydrogenation properties and the controlling factors of HIA are discussed in this *** with other factors,the atomic radii ratio r_A/r_B is the most important one influencing the ***-element substitution is an efficient way to suppress or limit HIA and may enable AB_2 compounds to be suitable for hydrogen storage.

关键词： Rare earth-based AB_2-type compounds Hydrogenation properties Hydrogen induced amorphization Elemental substitution

Facet effects on bimetallic ZnSn hydroxide microcrystals for selective electrochemical CO2 reduction

在线全文

学校读者我要写书评

暂无评论

Green Energy & Environment 2024年第8期9卷 1314-1320页

作者： Liu Han Cheng-wei Wang Shan-shan Luo Ying-tang Zhou Bing Li Ming Liu School of Chemistry and Chemical engineering Harbin Institute of Technology national engineering research center for Marine Aquaculture Marine Science and Technology CollegeZhejiang Ocean University

Employing crystal facets to regulate the catalytic properties in electrocatalytic carbon dioxide reduction reaction（eCO2RR） has been well demonstrated on electrocatalysts containing single metals but rarely explored for bimetallic systems. Here, we synthesize Zn Sn（OH）6（ZSO）microcrystals（MCs） with distinct facets and investigate the facet effects in eCO2RR. Electrochemical studies and in situ Fourier Transform Infrared Spectroscopy（in situ-FTIR） reveal that ZSO MCs produce mainly C1 products of HCOOH and CO. The {111} facet of the ZSO MCS exhibits higher selectivity and faradaic efficiency（FE） than that of the {100} facet over a wide range of potentials（-0.9 V ～-1.3 V versus RHE）. Density Functional Theory（DFT） calculations elucidate that the {111} facet is favorable to the adsorption/activation of CO2molecules,the formation of intermediate in the rate-determining step, and the desorption of C1 products of CO and HCOOH molecules.

关键词： ZnSn(OH) 6 Crystal facets Electrochemical carbon dioxide reduction C1 product Density functional theory

Effect of crystal morphology of ultrahigh-nickel cathode materials on high temperature electrochemical stability of lithium ion batteries

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第1期88卷 327-335,I0008页

作者： Bi Luo Hui Li Haoyu Qi Yun Liu Chuanbo Zheng Weitong Du Jiafeng Zhang Lai Chen School of Metallurgy engineering Jiangsu University of Science and TechnologyZhangjiagang 215600JiangsuChina national engineering Laboratory for High-Efficiency Recovery of Refractory nonferrous metals School of Metallurgy and EnvironmentCentral South UniversityChangsha 410083HunanChina School of Materials Science and engineering Beijing Key Laboratory of Environmental Science and EngineeringBeijing Institute of TechnologyBeijing 100081China

Higher nickel content endows Ni-rich cathode materials LiNi_(x)Co_yMn_(1-x-y)O_(2)(x>0.6)with higher specific capacity and high energy density,which is regarded as the most promising cathode materials for Li-ion ***,the deterioration of structural stability hinders its practical application,especially under harsh working conditions such as high-temperature *** these circumstances,it becomes particularly critical to clarify the impact of the crystal morphology on the structure and high-temperature performance as for the ultrahigh-nickel ***,we conducted a comprehensive comparison in terms of microstructure,high-temperature long-cycle phase evolution,and high-temperature electrochemical stability,revealing the differences and the working mechanisms among polycrystalline(PC),single-crystalline(SC)and Al doped SC ultrahigh-nickel *** results show that the PC sample suffers a severe irreversible phase transition along with the appearance of microcracks,resulting a serious decay of both average voltage and the energy *** the Al doped SC sample exhibits superior cycling stability with intact layered ***-situ XRD and intraparticle structural evolution characterization reveal that Al doping can significantly alleviate the irreversible phase transition,thus inhibiting microcracks generation and enabling enhanced ***,it exhibits excellent cycling performance in pouch-type full-cell with a high capacity retention of 91.8%after 500 cycles at 55℃.This work promotes the fundamental understanding on the correlation between the crystalline morphology and high-temperature electrochemical stability and provides a guide for optimization the Ni-rich cathode materials.

关键词： Single-crystalline Ultrahigh-nickel cathode High-temperature performance Phase evolution