检索结果-南通市图书馆

Journal of energy Chemistry 2024年第7期94卷 568-576页

作者： Guntae Lim Dong Guk Kang Hyeon Gyu Lee Yen Hai Thi Tran Kihun An Junghyun Choi Kwang Chul Roh Do Youb Kim Seung-Wan Song Department of Chemical engineering&Applied Chemistry Chungnam national University Daejeon 34134Republic of Korea energy storage materials Center Korea Institute of Ceramic Engineering&TechnologyJinju 52851Republic of Korea advanced energy materials research Center Korea Research Institute of Chemical TechnologyDaejeon 34114Republic of Korea

Incorporation of higher content Si anode material beyond 5 wt% to Li-ion batteries(LIBs)is challenging,owing to large volume change,swelling,and solid electrolyte interphase(SEI)instability ***,a strategy of diacetoxydimethylsilane(DAMS)additive-directed SEI stabilization is proposed for a stable operation of Si-0.33FeSi_(2)(named as Si-Fe)anode without graphite,which provides siloxane inorganics and organics enrichment that compensate insufficient passivation of fluoroethylene carbonate(FEC)additive and reduce a dependence on *** stable cycling performance of highly loaded(3.5 mA h cm^(-2))pure Si-Fe anode is achieved with 2 wt%DAMS combined with 9 wt%FEC additives under ambient pressure,yielding high capacity 1270 mA h g^(-1)at 0.5 C and significantly improved capacity retention of 81% after 100 cycles,whereas short circuit and rapid capacity fade occur with FEC only ***-directed robust SEI layer dramatically suppresses swelling and particles crossover through separator,and therefore prevents short circuit,demonstrating a possible operation of pure Si or Sidominant anodes in the next-generation high-energy-density and safe LIBs.

关键词： High-energy Li-ion battery Pure Si-Fe anode without graphite Silane additive SEI layer Suppressed swelling

Membrane-less MoO_(3-x)@TiO_(2)-bromine battery with excellent rate capability and cyclic stability

在线全文

学校读者我要写书评

暂无评论

Journal of energy Chemistry 2024年第6期93卷 316-321,I0008页

作者： Wenjie Huang Hui Wang Bin Yuan Liuzhang Ouyang Lichun Yang Min Zhu School of materials Science and engineering Guangdong Provincial Key Laboratory of Advanced Energy Storage MaterialsSouth China University of TechnologyGuangzhou 510640GuangdongChina

Bromine has attracted significant attention as a cathode material for aqueous batteries due to its high reduction potential of 1.05 V(Br_(3)^(-)+2e~-■3Br~-),impressive theoretical specific capacity of 223 mA h g^(-1),and rapid reaction kinetics in the ***,searching for compatible anode materials to match with bromine has posed a challenge due to its highly corrosive *** this study,we developed oxygen-deficient MoO_(3) with TiO_(2) coating(referred to as MoO_(3-x)@TiO_(2))as an anode material to pair with a bromine cathode in static full *** oxygen deficiency contributes to enhanced electronic and protonic diffusion within the MoO_(3-x)lattice,while the TiO_(2) coating mitigates structural dissolution and proton trapping during *** MoO_(3-x)@TiO_(2) demonstrates fast charge storage kinetics and excellent resistance to bromine *** impressive compatibility between MoO_(3-x)@TiO_(2) and bromine enables the construction of membrane-less full batteries with exceptional rate capability and cyclic *** MoO_(3-x)@TiO_(2)-bromine battery achieves an energy density of70.8 W h kg^(-1)at a power density of 328.1 W kg^(-1),showcasing an impressive long-term cyclic life of 20,000 *** study provides valuable insights for the development of high-performance aqueous secondary batteries.

关键词： Molybdenum trioxide Oxygen deficiency TiO_(2)coating Compatibility Bromine-based battery

A perspective on the key factors of safety for rechargeable magnesium batteries

在线全文

学校读者我要写书评

暂无评论

Journal of energy Chemistry 2024年第7期94卷 656-676页

作者： Shuangshuang Tan Jie Xu Rongrui Deng Qiannan Zhao Chaohe Xu Guangsheng Huang Jingfeng Wang Fusheng Pan national engineering research Center for Magnesium Alloys Chongqing UniversityChongqing 400044China national Innovation Center for Industry-Education Integration of energy storage Technology College of Materials Science and EngineeringChongqing UniversityChongqing 400044China Chongqing Institute of New energy storage materials and Equipment Chongqing 401135China

Rechargeable Mg batteries(RMBs)have become one of the best subsitutes for lithium-ion batteries due to the high volumetric capacity,abundant resources,and uniform plating behavior of Mg metal ***,the safety hazard induced by the formation of high-modulue Mg dendrites under a high current density(10 mA cm^(-1))was still revealed in recent *** has forced researchers to re-examine the safety of *** this review,the intrinsic safety factors of key components in RMBs,such as uneven plating,pitting and flammability of Mg anode,heat release and crystalline water decomposition of cathode,strong corrosion,low oxidition stability and flammability of electrolytes,and soforth,are systematacially *** origins,formation mechanisms,and possible safety hazards are deeply *** develop high-performance Mg anode,current strategies including designing artificial SEI,three-dimensional substrates,and Mg alloys are *** practical electrolytes,the configurations of boron-centered anions and simple Mg salts and the functionalized solvent with high boiling point and low flammability are suggested to comprehensively *** addition,the future study should more focus on the investigation on the thermal runaway and decomposition of cathode materials and *** review aims to provide fundamental insights into the relationship between electrochemistry and safety,further promoting the sustainable development of RMBs.

关键词： Rechargeable Mg batteries Battery safety Mg dendrites Electrolyte decomposition Intrinsic safety issues

Simultaneously enhanced electrochemical performance and air stability of Ni-rich cathode with a modified washing process

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第1期43卷 87-97页

作者： Ben-Rui Hu Ying-Yi Yuan Yu-Cheng Wang Xun-Hui Xiong School of Environment and energy Guangdong Provincial Key Laboratory of Advanced Energy Storage MaterialsSouth China University of TechnologyGuangzhou 510640China

Water washing has been regarded as one of the most effective strategies to remove surface residual lithium of nickel-rich layered oxides for lithium-ion batteries(LIBs).However,the loss of lattice lithium during the water washing process deteriorates the electrochemical performances and air ***,washing the LiNi_(0.90)Co_(0.05)Al_(0.02)O_(2)(NCA) with ammonium dihydrogen phosphate(NH_(4)H_(2)PO_(4)) solution has been proposed to simultaneously enhance electrochemical performances and air stability,in which in-situ generated Li_(3)PO_(4) coating layer on surface of NCA can suppress the loss of lattice ***,as a fast ionic conductor,Li_(3)PO_(4) coating layer on NCA can prevent the direct contact with electrolyte/*** a result,the NH_(4)H_(2)PO_(4) solution washed NCA cathode can deliver a high capacity of131.9 mAh·g^(-1) at 10.0C rate as well as impressive cycle stability with a capacity retention of 83.1% after 100 cycles at 1.0C,much higher than those of water washed NCA(WS-NCA) *** exposed in air for 7 days,the NH_(4)H_(2)PO_(4) solution washed NCA electrode can more effectively maintain the structural integrity as well as the electrochemical performances than water-washed *** work provides a simple and effective approach to enhance the cycle stability and air stability of Nickel-rich cathode materials.

关键词： Layered Ni-rich cathode Residual lithium Li_(3)PO_(4)coating Rate performance Air stability

On-demand engineerable visible spectrum by fine control of electrochemical reactions

在线全文

学校读者我要写书评

暂无评论

national Science Review 2024年第3期11卷 239-249页

作者： Qirong Liu Lei Liu Yongping Zheng Min Li Baofu Ding Xungang Diao Hui-Ming Cheng Yongbing Tang advanced energy storage Technology research Center Shenzhen Institute of Advanced TechnologyChinese Academy of Sciences Institute of Technology for Carbon Neutrality Shenzhen Institute of Advanced Technology Chinese Academy of Sciences School of energy and Power engineering North University of China School of Resource Environment and Safety EngineeringHunan University of Science and Technology School of energy and Power engineering Beihang University Shenzhen Key Laboratory of energy materials for Carbon Neutrality Shenzhen Institute of Advanced Technology Chinese Academy of Sciences Shenyang national Laboratory for materials Science Institute of Metal Research Chinese Academy of Sciences

Tunability of optical performance is one of the key technologies for adaptive optoelectronic applications,such as camouflage clothing, displays, and infrared shielding. High-precision spectral tunability is of great importance for some special applications with on-demand adaptability but remains challenging. Here we demonstrate a galvanostatic control strategy to achieve this goal, relying on the finding of the quantitative correlation between optical properties and electrochemical reactions within materials. An electrochromic electro-optical efficiency index is established to optically fingerprint and precisely identify electrochemical redox reactions in the electrochromic device. Consequently, the charge-transfer process during galvanostatic electrochemical reaction can be quantitatively regulated, permitting precise control over the final optical performance and on-demand adaptability of electrochromic devices as evidenced by an ultralow deviation of research in a wide range of spectroelectrochemistry, electrochemical energy storage, electrocatalysis, and material chemistry.

关键词： electrochromics fine control spectral tunability high precision galvanostatic control

Exceptional catalytic effect of novel rGO-supported Ni-Nb nanocomposite on the hydrogen storage properties of MgH_(2)

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of materials Science & Technology 2024年第5期172卷 83-93页

作者： Samuel Guemou Liuting Zhang Shuai Li Yiqun Jiang Tao Zhong Zichuan Lu Ren Zhou Fuying Wu Qian Li School of energy and Power Instrumental Analysis CenterJiangsu University of Science and TechnologyZhenjiang 212003China national engineering research Center for Magnesium Alloys&national Key Laboratory of advanced Casting Technologies&College of materials Science and engineering Chongqing UniversityChongqing 400044China Chongqing Institute of New energy storage materials and Equipment Chongqing 401135China Max Planck Institute for Iron research Düsseldorf 40237Germany

The design of an excellent active catalyst to improve the sluggish kinetic and thermodynamic properties of magnesium hydride(MgH_(2))remains a great challenge to achieve its practical *** this study,a novel Ni-Nb/rGO nanocomposite catalyst was successfully prepared by one-spot hydrothermal and sub-sequent calcination *** novel Ni-Nb/rGO nanocomposite exhibits an exceptional catalytic effect on improving MgH_(2) sorption ***,the onset desorption temperature of MgH_(2)+10 wt%Ni-Nb/rGO composite is reduced to 198℃,much lower than that of undoped MgH_(2)(330℃).In-terestingly,the composite can release 5.0,5.9,and 6.0 wt%H_(2) within 10 min at 245,260,and 275℃,***,the dehydrogenated MgH_(2)+10 wt%Ni-Nb/rGO composite starts to absorb hydrogen even at room temperature with approximate 2.75 wt%H_(2) uptake at 75℃under 3 MPa H_(2) pressure within 30 min and exhibits excellent stability by maintaining 6.0 wt%hydrogen content after 20 cycles at 300℃.Chou’s model suggests that the de/hydrogenation kinetics of Ni-Nb/rGO-modified MgH_(2) switches from surface penetration model to diffusion model at lower ***,the ac-tivation energies(E a)for the de/hydrogenation of MgH_(2)+10 wt%Ni-Nb/rGO are reduced to 57.8 kJ/mol and 33.9 kJ/mol,which are significantly lower than those of undoped MgH_(2).The work demonstrates that the addition of a novel ternary Ni-Nb/rGO catalyst is an effective strategy to not only boost the sorption kinetics of MgH_(2) but also maintain its cycling property.

关键词： Hydrogen storage materials Magnesium hydride Ni-Nb/rGO Kinetic analysis Catalytic mechanism

Flower-like CuS/γ-Fe_(2)O_(3) van der Waals heterostructures with highefficient electromagnetic wave absorption

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano research 2024年第4期17卷 3324-3333页

作者： Na Lu Jingshen Xu Mengwei Yuan Genban Sun Beijing Key Laboratory of energy Conversion and storage materials Institution College of ChemistryBeijing Normal UniversityBeijing 100875China Center for advanced materials research Beijing Normal UniversityZhuhai 519087China

The escalating electromagnetic(EM)pollution issues and the demand to elevate military stealth technology make it imperative to develop cost-effective and high-performance electromagnetic wave(EMW)absorbing *** this paper,the flower-like CuS/γ-Fe_(2)O_(3) van der Waals(vdW)heterostructures have been synthesized via a facile two-step solvothermal *** flower-like CuS skeleton increases the attenuation path of EMW while reducing the material *** contents ofγ-Fe_(2)O_(3) nanoparticles anchor between the flower-like CuS nanosheets to constitute a heterogeneous structure,which enables dielectric and magnetic loss synergistically to optimize impedance matching and remarkably improve the EMW absorption *** minimum reflection loss(RLmin)is-49.36 dB with a thickness of only 1.6 mm and the effective absorption bandwidth(EAB)reaches 4.64 GHz(13.36–18 GHz).By adjusting the thickness of the absorber,the EAB can cover 96%of the GHz ***,the superior absorption of-61.53 dB at middle frequency band can be obtained by adjusting the amount of Fe_(2)O_(3) *** this study,the adjustment of EM parameters and the optimization of impedance matching have been achieved by constructing a novel vdW heterogeneous structure,which provides fresh ideas and references for the design of high-performance EMW absorbing materials.

关键词： flower-like CuS γ-Fe_(2)O_(3) van der Waals heterostructures impedance matching electromagnetic wave absorption

Impact of oxygen incorporation on interface optimization and defect suppression for efficiency enhancement in Cu_(2)ZnSn(S,Se)_(4)solar cells

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of energy Chemistry 2024年第8期95卷 77-85,I0003页

作者： Shicheng Deng Songfan Wang Yuanyuan Wang Qian Xiao Yuena Meng Dongxing Kou Wenhui Zhou Zhengji Zhou Zhi Zheng Sixin Wu Key Laboratory for Special Functional materials of MOE National&Local Joint Engineering Research Centre for High-efficiency Display and Lighting TechnologySchool of MaterialsHenan UniversityKaifeng 475004HenanChina Key Laboratory of Micro-Nano materials for energy storage and Conversion of Henan Province Institute of Surface Micro and Nano MaterialsCollege of Chemical and Materials EngineeringXuchang UniversityXuchang 461000HenanChina

Kesterite Cu_(2)ZnSn(S,Se)_(4)(CZTSSe)solar cells suffer from severe carrier recombination,limiting the photovoltaic *** energy band alignment at the p-n junction and defective front interface are two main ***,oxygen incorporation in CZTSSe via absorber air-annealing was developed as a strategy to optimize its surface photoelectric property and reduce the *** optimized oxygen incorporation conditions,the carrier separation and collection behavior at the front interface of the device is *** particular,it is found that oxygen incorporated absorber exhibits increased band bending,larger depletion region width,and suppressed absorber *** indicate the dynamic factors for carrier separation become ***,the increased potential difference between grain boundaries and intra grains combined with the decreased concentration of interface deep level defect in the absorber provide a better path for carrier *** a consequence,the champion efficiency of CZTSSe solar cells has been improved from 9.74%to 12.04%with significantly improved open-circuit voltage after optimized air-annealing *** work provides a new insight for interface engineering to improve the photoelectric conversion efficiency of CZTSSe devices.

关键词： Kesterite Thin film solar cell Interface optimization Surface oxidation Defect suppression

Simultaneous integration of Fe clusters and NiFe dual single atoms in nitrogen-doped carbon for oxygen reduction reaction

在线全文

学校读者我要写书评

暂无评论

Nano research 2024年第4期17卷 2291-2297页

作者： Jirong Bai Yuebin Lian Yaoyao Deng Mei Xiang Peng Xu Quanfa Zhou Yawen Tang Yaqiong Su research Center of Secondary Resources and Environment School of Chemical Engineering and MaterialsChangzhou Institute of TechnologyChangzhou 213022China Jiangsu Key Laboratory of New Power Batteries School of Chemistry and Materials ScienceNanjing Normal UniversityNanjing 210023China School of Chemistry Engineering Research Center of Energy Storage Materials and Devices of Ministry of EducationNational Innovation Platform(Center)for Industry-Education Integration of Energy Storage TechnologyXi’an Jiaotong UniversityXi’an 710049China

Atomically-dispersed iron-based electrocatalysts are promising substitutes for noble metal electrocatalysts because of excellent performance in oxygen reduction reaction(ORR).Rationally modulating the local coordination environment of the Fe site and optimizing the binding energy of oxygen reduction intermediates are effective strategies to optimize ORR ***,we report a new method in which Ni is introduced to construct NiFe dual single atoms and iron nanoclusters loaded on the nitrogen-doped carbon with a highly porous *** design plays a synergistic role of dual single atoms and clusters,optimizes the 3d orbital and Fermi level of Fe,breaks the symmetrical structure of Fe-N_(4),and effectively improves the adsorption/desorption behavior of the oxygen-containing *** tests show FeNCs/NiFeSAs-NC has an excellent intrinsic *** calculations show the oxygen-containing species on the Ni active site will move to the middle of NiFe(bridge site connection)after optimization and that the key step is OH desorption,with a reaction energy of 0.27 *** electron exchange between NiFe-N6 and Fe-cluster is very strong,further indicating the introduction of Ni species and Fe clusters has a regulatory effect on the electronic structure of Fe-N_(4).

关键词： NiFe dual single atoms Fe clusters OH*adsorption energy oxygen reduction reaction

Progress in processing of porous titanium:a review

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第5期43卷 1932-1955页

作者： Xiao-Li Yang Xian-Feng Du Zhi-Lin Xu Zhong-Shuai Liang Li-Long Xiong engineering research Center of energy storage materials and Devices Ministry of EducationSchool of ChemistryXi'an Jiaotong UniversityXi'an 710049China

As a novel structural and functional material,porous titanium and its alloys have been widely used in the aerospace,marine engineering and biomedical fields due to their high corrosion resistance,low density,good biocompatibility and excellent mechanical ***,in this paper,a comprehensive review of powder metallurgy(PM)(including additive manufacturing(AM)processes)for fabricating porous titanium is firstly covered in terms of their working principles,capabilities,shortcomings and ***,the influencing factors of various methods on final pore structure of porous Ti are ***,a summary of the chemical methods(CM)to obtain the porous Ti is also provided,such as dealloying method and reduction ***,the tendency and direction of preparation technology as well as application of porous titanium were prospected.

关键词： Porous titanium Powder metallurgy Chemical method Pore structure Processing process